Model and estimation method for predicting the sound radiated by a horn loudspeaker - With application to a car horn

This paper deals with a new car horn device made of a sound synthesizer and an electrodynamic horn loudspeaker. It presents an one-dimensional model allowing to predict the loudspeaker efficiency and a specific method to estimate experimentally the model parameters. First, this model aims at reducing the time spent in the design process. Second it aims at correcting the sound emitted by the sound synthesizer in order that the listener hears the sound designed for creating the warning message. The study gives a survey of the vast loudspeaker literature. It is based on the conventional electroacoustic approach used for electrodynamic loudspeakers and on wave propagation models used for characterizing acoustic horns. The estimation of the model parameter values is performed using measurements of the electrical impedance of the loudspeaker and of the acoustic impedance of the horn. The model is assessed by comparing the calculated and measured electrical impedances and horn efficiencies. Results show that the model predicts well the horn efficiency up to 2500 Hz, the limitation being due to the horn radiation impedance modelization.     

Finite element simulation of an axisymmetric acoustic transmission system with a sound absorbing wall

A finite element formulation for the axisymmetric acoustic field problem with an arbitrary sound absorbing wall is developed on the true adjoint system approach. A triangular ring element with a second order polynomial trial function is used for discretization. As a first numerical example, the transmission characteristic of acoustic filters of expansion type is considered, in which the wall is partly treated with sound absorbing material. As a second example the effect of a temperature gradient in the chamber on the transmission characteristic is calculated. The third example is the calculation of the throat impedance of conical and exponential acoustic horns, for which the half sphere into which the radiation travels is assumed to be terminated at an appropriate radius by a hypothetical wall having the characteristic impedance of the acoustic medium. The calculated results are verified by comparison with measured results.     

Numerical simulation of nonlinear propagation of sound waves in a finite horn

Nonlinear acoustic propagation generated by a piston in a finite horn is numerically studied.A quasi-one-dimensional nonlinear model with varying cross-section uses high-order low-dispersion numerical schemes to solve the governing equation.Because of the nonlinear wave distortion and reflected sound waves at the mouth,broadband time-domain impedance boundary conditions are employed.The impedance approximation can be optimized to identify the complex-conjugate pole-residue pairs of the impedance functions,which can be calculated by fast and efficient recursive convolution.The numerical results agree very well with experimental data in the situations of weak nonlinear wave propagation in an exponential horn,it is shown that the model can describe the broadband characteristics caused by nonlinear distortion.Moreover,finite-amplitude acoustic propagation in types of horns is simulated,including hyperbolic,conical,exponential and sinusoidal horns.It is found that sound pressure levels at the horn mouth are strongly affected by the horn profiles,the driving velocity and frequency of the piston.The paper also discusses the influence of the horn geometry on nonlinear waveform distortion.     

有限长号筒中非线性声传播的数值模拟研究

研究了大振幅活塞声源经有限长号筒向外辐射声波的非线性声学问题。采用具有频散保持特性的高精度计算格式求解了适用于变截面管道的一维非线性声场模型,并考虑到声波的非线性畸变及管口处的声反射,加入了宽频时域声阻抗边界条件。宽频阻抗模型的共轭复数系数采用优化拟合方法近似求解,并采用递推卷积算法快速求解出时域声阻抗。在弱非线性条件下模拟指数形号筒中的声传播取得了与已有实验相一致的结果,表明模型能够描述声波非线性畸变带来的宽频特性。进而采用本模型数值模拟了大振幅活塞声源在双曲形、锥形、指数形和正弦形号筒中的非线性声传播问题,结果表明号筒出口声压级受活塞振动速度、频率以及号筒形状的影响,并分析讨论了波形畸变与号筒几何形状之间的关系。      

Acoustic particle velocity horns

The paper considers receiving acoustic horns designed for particle velocity amplification and suitable for use in vector sensing applications. Unlike conventional horns, designed for acoustic pressure amplification, acoustic velocity horns (AVHs) deliver significant velocity amplification even when the overall size of the horn is much less than an acoustic wavelength. An AVH requires an open-ended configuration, as compared to pressure horns which are terminated at the throat. The appropriate formulation, based on Webster's one-dimensional horn equation, is derived and analyzed for single conical and exponential horns as well as for double-horn configurations. Predicted horn amplification factors (ratio of mouth-to-throat radii) were verified using numerical modeling. It is shown that three independent geometrical parameters principally control a horn's performance: length l, throat radius R(1), and flare rate. Below a predicted resonance region, velocity amplification is practically independent of frequency. Acoustic velocity horns are naturally directional, providing maximum velocity amplification along the boresight.     

板结构的声辐射模态分析及其高分辨率法向振动速度重建

提出了一种基于声辐射模态的速度基向量构建方法,该速度基向量不受网格划分的影响,可用于高分辨率的板结构法向振动速度重建。首先对板表面稀疏网格的声辐射模态进行计算,再以声辐射模态和模态系数构建板法向振动速度分布的基向量,然后由声场测量声压求解基向量系数,最后由该系数和加密网格的速度基向量重建高分辨率的板法向振动速度分布。以简支板声源进行仿真计算,当测量声压信噪比为30 dB时,低频的法向振动速度重建误差最低可达3.7%;以固支板声源在消声室中进行实验验证,131.5 Hz振动频率下的重建误差低于7%。该方法实现了只需要少量声压测量点即可精确重建板声源更高分辨率的法向振动速度分布。      

小尺度封闭空间声场的无网格数值算法

无网格法是一种新兴的数值计算方法,具有不需要网格支持的特点。本文将该方法引入室内声学建模,推导了无网格声场数值计算模型,并将其应用于典型小尺度封闭空间内部声场的数值分析。针对声传递函数,将本方法与理论解和SYSNOISE计算结果进行了比较,并将计算的混响时间与实验测量结果作了对比,表明本方法具有良好的精度。     

声纳导流罩吸声障板声学特性的研究

本文研究内容属于舰艇声兼容性技术研究的一部分。应用声学软件SYSNOISE计算了,声纳定向发射时某试验用声纳导流罩及尾部吸声障板的声场特性,同时进行相同工况的水下模型试验。计算结果与试验结果吻合良好,说明应用声学软件对声纳声场进行计算是一种可行的方法,有可能推广至其他的水下模型的声场计算。结果数据反映了吸声障板对声纳定向发射时声场的影响,为舰艇总体声纳导流罩内吸声障板的结构设计、声兼容设计提供依据。     

散热片对变压器声辐射的影响及优化分析*

油浸式配电变压器表面布有大量散热片结构,使得油箱振动声辐射变得复杂。该文研究了散热片结构对油浸式变压器辐射声场的影响,在此基础上提出了散热片结构尺寸的优化措施。建立了考虑流固耦合的变压器振动和声学分析模型,提出了散热片声场效应评判准则,基于模态分析和频响分析探讨了散热片对变压器振动声辐射影响的振动效应、声源效应和声障效应。实验数据和仿真分析结果表明,变压器散热片对变压器振动声辐射的影响不可忽视,尤其是声源效应。采用遗传算法对散热片分布和尺寸参数进行优化分析,计算结果表明,通过优化散热片可以有效降低变压器表面均方振速和辐射声功率,可为变压器噪声控制和优化提供依据。     

Design of a Bézier-profile horn for high displacement amplification

A new horn for high displacement amplification is developed. The profile of the horn is a cubic Bézier curve. The ultrasonic actuation of the horn exploits the first longitudinal displacement mode of the horn. A design method of the horn using an optimization scheme and finite element analyses is developed. Prototypes of the horns are manufactured by a numerical control machining process. Performances of the proposed horn have been evaluated by experiments. Experimental results of the harmonic response of the fabricated horn confirm the effectiveness of the design method. The displacement amplification of the proposed horn is 71% higher than that of the traditional catenoidal horn with the same length and end surface diameters.     

Sound source localization by the plainfin midshipman fish, Porichthys notatus

The aim of this study was to use plainfin midshipman fish (Porichthys notatus) as a general model to explore how fishes localize an underwater sound source in the relatively simple geometry of a monopole sound field. The robust phonotaxic responses displayed by gravid females toward a monopole sound projector (J-9) broadcasting a low-frequency (90 Hz) tone similar to the fundamental frequency of the male's advertisement call were examined. The projector's sound field was mapped at 5 cm resolution azimuth using an eight-hydrophone array. Acoustic pressure was measured with the array and acoustic particle motion was calculated from pressure gradients between hydrophones. The response pathways of the fish were analyzed from video recordings and compared to the sound field. Gravid females at initial release were directed toward the sound source, and the majority (73%) swam to the playback projector with straight to slightly curved tracks in the direction of the source and in line with local particle motion vectors. In contrast, the initial direction of the control (sound-off) group did not differ from random. This paper reports on a comparison of fish localization behavior with directional cues available in the form of local particle motion vectors.     

超声搅拌磁流变抛光液的声场仿真分析

为了探究超声搅拌磁流变抛光液的制备及优化工艺,利用多物理场数值计算方法,建立了超声搅拌磁流变抛光液的声场仿真模型,并进行了频域分析。研究了不同液位深度、超声变幅杆探入深度,不同功率下磁流变抛光液的声场分布。通过测量磁流变抛光液的声场强度对声场仿真进行了验证。结果表明：随着距变幅杆距离的增加,声强逐渐减弱,高声强区域主要分布在换能器轴线附近。声强在距变幅杆20mm范围内急剧衰减,变幅杆最佳探入深度为10mm,增大功率有助于空化区域的扩大。声场仿真结果与实验测量结果基本一致,对磁流变抛光液的制备提供了数值计算基础。     

微波孔缝线性耦合函数研究

讨论了微波脉冲通过孔缝线性耦合进入腔体内的研究方法。给出了线性耦合的物理基础,定义了耦合函数，并导出了耦合函数随入射电场极化方向变化的公式。简要描述了数值求解孔缝线性耦合的时域有限差分方法以及修正算法。给出了以矢量网络分析仪HP8510C为主要设备测量耦合函数的实验方法。通过耦合函数的研究，观察到了共振效应和增强效应等现象，给出了微波孔缝耦合发生共振的普适公式。分析了测量探头对耦合函数测量的影响，验证了耦合函数随入射电场方向变化的公式。理论、数值和实验结果符合得较好。     

The characteristics of sound radiation from a cylindrical shell coated with multiple compliant layers

The effect of multiple compliant layers on sound radiation from a finite cylindrical shell immersed in an infinite acoustic medium is studied. The transfer matrix is derived according to the continuous boundary conditions at each adjacent interface of the multi-layer system. With the shell theory and the acoustic wave equation, the theoretical model is developed to estimate the characteristics of sound radiation. The numerical calculation results show that the amount of the acoustic radiation power reduction increases as the wave speed or the density of the compliant layer decreases, and using multi-layer system could be more effective on noise reduction than the corresponding uniform single layer.     

Matching a transducer to water at cavitation: acoustic horn design principles

High-power ultrasound for several decades has been an integral part of many industrial processes conducted in aqueous solutions. Maximizing the transfer efficiency of the acoustic energy between electromechanical transducers and water at cavitation is crucial when designing industrial ultrasonic reactors with large active volumes. This can be achieved by matching the acoustic impedances of transducers to water at cavitation using appropriately designed ultrasonic horns. In the present work, a set of criteria characterizing the matching capabilities of ultrasonic horns is developed. It is shown that none of the commonly used tapered-shape horns can achieve the necessary conditions. An analytical method for designing five-element acoustic horns with the desirable matching properties is introduced, and five novel types of such horns, most suitable for practical applications, are proposed. An evaluation of the horns' performance is presented in a set of experiments, demonstrating the validity of the developed theoretical methodology. Power transfer efficiency increase by almost an order of magnitude is shown to be possible with the presented horn designs, as compared to those traditionally utilized.     

计算水下凹面目标散射声场的声束弹跳法

为了解决含有多次散射时水下目标声散射场的计算问题,提出了一种声束弹跳方法。把入射声波划分为若干声束,根据几何声学方法计算每条声束在目标表面的反射方向和能量损失,利用物理声学方法计算最后一次反射的声束所对应的面元的散射场,通过计算所有声束产生的散射场的叠加得到整个目标的散射场。计算了直角凹面圆锥体的散射声场,并对具体模型进行了水池测量实验,理论计算和实验测量结果一致。表明该方法作为一种高频近似的数值计算方法,可以计算存在多次散射时水下目标的散射声场。      

海洋波导中目标声辐射场的计算方法

针对海洋波导中目标声辐射场的计算问题,提出了一种基于波叠加法并在近、远场采用不同水声传播模型的建模方法,可以将近、远场作为一个统一的系统进行高效地分析。该方法通过给定的已知表面振动速度的结构计算出目标内部虚拟点声源的源强,再配合在相应的水声环境中点声源传播模型的Green函数计算出结构外的声辐射场。以Green函数为纽带,在求源强和计算近场声辐射场时采用镜像虚源法,而在计算远场声辐射场时采用简正波法。通过该方法得到的有限水深波导中声速剖面为正梯度、负梯度、负跃层的3种情况下的脉动球、刚体摆动球的声辐射场计算结果与COMSOL的有限元计算结果进行对比,结果表明了该方法在提高计算效率的同时保证了计算精度。      

Investigation on Noise Pollution Comprehensive Treatment of Distribution Transformer in Living Area

In the current paper, which deals with the noise pollution excited by distribution transformers in the living area, a comprehensive treatment scheme is put forward for the purpose of reducing the sound pressure level emitting into the environment. In accordance with the associated test standard, the sound pressure levels of distribution transformer and surrounding environment are not only tested but analyzed as well. The measurements were carried out with the frequency analysis of the 1/3 octave resolution, with the center frequencies at 125 Hz, 250 Hz, 400 Hz, and 500 Hz. As illustrated, on the basis of the measurement results, the frequency of noise at 500 Hz of distribution transformer causes the major noise pollution in the surrounding environment. This measurement result is in line with the noise frequency characteristics of distribution transformer. There are two transmission routes of noise: i) the noise excited by distribution transformer transmits by means of the wall of distribution room, and ii) part of noise spreads through the ground of distribution room. Accordingly, acoustic shield and vibration isolation device are applied for the reduction of the low frequency noise emitted through the above two paths. Aimed at applying the appropriate acoustic material and vibration mounting, the evaluation of the noise reduction and vibration absorption is carried out in accordance with the sound and vibration insulation theory. Following the noise treatment, the transformer and environment noise are measured again. The corresponding findings shed light on the fact that the sound level satisfied the requirement of limits of the ordinance. The proposed noise treatment scheme can be applied to the existing power distribution facilities for controlling the sound levels that reach a point where it is comparatively more unobjectionable.     

Estimation of surface roughness effect on spectral characteristics of tone signals propagating along stationary paths in a shallow sea

Scattering of a tonal low-frequency (up to 400 Hz) acoustic signal on a rough surface during its propagation along stationary paths in a shallow water area is considered. A calculation technique of estimating the spectral power density of the signal scattered at wind waves (reverberation) given an arbitrary angular distribution of the wind wave is developed based on the Bragg scattering model. The obtained results are compared with the results of numerical simulation of resonant sound scattering at surface perturbations according to an algorithm proposed by the authors, as well as with the results of experimental investigations.     

Whole-lung resonance in a bottlenose dolphin (Tursiops truncatus) and white whale (Delphinapterus leucas)

An acoustic backscatter technique was used to estimate in vivo whole-lung resonant frequencies in a bottlenose dolphin (Tursiops truncatus) and white whale (Delphinapterus leucas). Subjects were trained to submerge and position themselves near an underwater sound projector and a receiving hydrophone. Acoustic pressure measurements were made near the thorax while the subject was insonified with pure tones at frequencies from 16 to 100 Hz. Whole-lung resonant frequencies were estimated by comparing pressures measured near the subject's thorax to those measured from the same location without the subject present. Experimentally measured resonant frequencies for the white whale and dolphin lungs were 30 and 36 Hz, respectively. These values were significantly higher than those predicted using a free-spherical air bubble model. Experimentally measured damping ratios and quality factors at resonance were 0.20 and 2.5, respectively, for the white whale, and 0.16 and 3.1, respectively, for the dolphin.