高双折射光子晶体光纤中均匀布拉格光栅的特性

研究了具有高双折射的光子晶体光纤(HB PCF)中均匀布拉格光栅(FBG)的光谱特性。利用紧凑的超格子模型,对光子晶体光纤的传输特性进行分析,研究正向传输和反向传输的模式之间的耦合规律,从而研究写入光子晶体光纤中的均匀布拉格光栅的特性。首先给出具有C6v对称性的零双折射光子晶体光纤中光纤布拉格光栅的布拉格波长λB随光纤结构参量的变化规律;然后分析一种高双折射光子晶体光纤中的光纤布拉格光栅的光谱特性,高双折射使两个不同偏振态的反射峰分开较大;最后分析了一种常用的双模双折射光子晶体光纤中光纤布拉格光栅的光谱特性,LP01模和LPe11模的两个偏振态对应的反射谱都由于高双折射而分开。     

光子晶体光纤布拉格光栅传输谱特性的分析

研究光子晶体光纤中光纤光栅的传输谱特性对于研制基于光子晶体光纤的光纤光栅器件有着重要的意义。结合耦合模理论和光束传输相关函数方法,对一种典型光子晶体光纤中的布拉格光栅(FBG)传输谱进行了理论分析。比较了光子晶体光纤中布拉格光栅与常规布拉格光栅的传输谱。数值分析了光纤截面结构变化对于光栅传输谱的影响,并给出这种影响的定性解释。计算结果显示,与常规光纤光栅相比,包层模共振引起的损耗峰与正反向纤芯模耦合引起的损耗峰可以相比拟,而包层模共振的间隔也比常规光纤中光纤光栅的包层模共振间隔要大。同时给出了晶体光纤截面上空气孔的占空比,空气孔的排布层数对于传输谱影响的规律。     

热激法光子晶体光纤光栅制备工艺中热传导特性研究

研究了基于结构性改变的光子晶体光纤光栅的热激法制备工艺,理论分析了此种工艺的成栅原理,采用热传导理论和有限元法研究了制备过程中光子晶体光纤中的温度场分布,以及包层空气孔结构和激光参数对成栅效果的影响.研究结果表明,利用光子晶体光纤包层空气孔周期性塌缩可以形成光栅;采用两点热激法时,能够实现能量在光纤径向均匀分布,轴向近似于高斯分布;包层气孔结构加速了成栅过程,相同光斑尺寸下,光纤塌缩所需激光功率随气孔层数和气孔半径的增大而减小;最后,对包层空气孔结构为1层到7层的光子晶体光纤热激过程进行仿真,得到了空气填 关键词： 光纤光栅 光子晶体光纤 热激法 有限元法     

柚子型光子晶体光纤啁啾光栅的反射谱特性

利用有限元法和传输矩阵法,对柚子型结构的光子晶体光纤啁啾光栅的反射谱进行了理论分析。得到了啁啾光栅参数和光纤参数对光子晶体光纤啁啾光栅反射谱的影响规律。结果表明随着啁啾系数和折变量的增加,光栅反射谱呈规律变化,当啁啾系数增大到一定程度时几个反射峰会连到一起,形成一个大的反射带宽。光纤的内包层直径和纤芯直径的改变能够影响各反射峰之间的间距。同时研究了切趾变迹对光子晶体光纤啁啾光栅反射谱的影响,研究表明,所用切趾函数会同时对多个峰进行切趾,每个峰的切趾效果都很好。对反射谱波动较大的几个峰相连的啁啾光栅经过柯西切趾后反射谱曲线平滑,适合于实际应用。     

光子晶体理论应用于取样光纤光栅的研究

将取样光纤光栅近似为引入多个有规律的大尺寸缺陷的一维二元光子晶体,运用光子晶体传输矩阵理论分析了其长度L、周期LA、折射率调制量δneff和采样率p等参量对其反射谱的影响规律,并将所得结果与用取样光纤光栅传输矩阵法计算所得结果进行了比较,得出了用光子晶体理论分析与用传统的模耦合理论分析相吻合的特性。在分析取样光纤光栅的其它性质以及将其应用于实际时都可借鉴此理论,以达到工程实际应用的最佳效果。     

光子晶体理论应用于光纤布拉格光栅的研究

将光纤布拉格光栅近似为一维光子晶体，研究光栅的能带结构和光学传输特性。利用平面波展开法对光子晶体进行理论研究，将研究方法移植到光纤布拉格光栅上，并对其进行数值分析，得到光栅的传输特性。研究表明，光栅反射谱有多个反射峰，峰值中心频率是基频的整数倍，而且峰值处存在光子带隙，反射峰带宽对应光子带隙宽度，中心频率和带宽随光栅长度、高介电常量材料占空比、调制深度而变化。结果与传统的耦合模理论一致。     

光子晶体光纤及在光纤光栅中的应用

从光子晶体光纤(PCF)与普通光纤在光纤结构上的差异出发，简要分析PCF的导光原理与单模特性，并探讨基于PCF的光纤光栅的稳定性，基于聚合物填充多孔光纤的长周期光纤光栅的温度调谐性能，以及纯结构性非光敏纤芯长周期光子晶体光纤光栅的原理。从一个方面说明了光子晶体光纤的潜在应用。     

基于PCF-LPG的差分算法实现对光纤传感器的噪音消除

为了有效消除光源抖动及系统不稳定因素给光纤传感器带来的噪音干扰,提高光纤传感器的准确度,本文提出了一种基于光子晶体光纤长周期光栅的差分算法.利用光子晶体光纤长周期光栅良好的温度稳定性及宽光谱滤波特性,同时监测位于光子晶体光纤长周期光栅透射谱正负斜率线性区域内的两个信号功率变化.这两个信号是经同一路径到监测设备的,包含光源抖动以及系统其它不稳定因素带来的噪音干扰,对这两个信号进行差分处理即可有效消除噪音干扰,并将其应用于光纤环镜温度传感器.结果表明:通过基于光子晶体光纤长周期光栅的差分处理,在光源功率变化±10%的情况下,差分值基本保持不变,由此获得的温度测量值与真实值相对误差分别为0.04和0.03|与未引入差分算法相比,传感器准确度从约76%提高到约97%.本文提出的基于光子晶体光纤长周期光栅的差分算法可以有效消除光纤传感器内功率抖动所带来的噪音干扰,大大提高系统的准确度.     

一种基于结构性改变的光子晶体光纤光栅理论研究

对一种新型基于结构性改变的光子晶体光纤光栅原理进行了研究.采用多极法分析了结构性改变对折射率的影响,得到有效折射率与包层气孔塌缩之间的关系,建立了结构性改变光子晶体光纤光栅模型.利用耦合模理论对所成光栅性能进行了分析,重点研究了包层空气孔层数、空气孔占空比、气孔塌缩程度对光栅谐振波长、带宽的影响.研究结果表明,光子晶体...     

Study of heat transfer characteristics in PCFG fabrication technology using heat method

The fiber gratings fabrication technology with the heating method in a photonic crystal fiber (PCF) based on structural change is examined. The principle of photonic crystal fiber gratings (PCFGs) is analyzed in theory. The heat transfer theory and finite element method are used to examine the thermal field distribution in the fiber and the influence of the air hole structure in the cladding, and the parameters of the laser beam in the process of grating fabrication are discussed. The results show that gratings can be formed by the periodic collapse of air holes in the cladding of PCFs. Under double-point heating condition, the energy is uniformly distributed in the radial direction and is approximate to Gaussian distribution in the axial direction. With the same size of the luminous spot, as the layers and radius of the air holes increase, the laser power needed to make the air holes collapse decreases. With the same laser power, as the luminous spot radius increases, the needed heating time increases. Moreover, the relationship between the laser power needed and the air filling rate is obtained as the number of layers of the air holes changes from 1 to 7. This kind of PCFG can overcome the long-term thermal instability of conventional gratings in substance and thus has great potential applications in the related field of optical fiber sensors.     

Rewritable self-assembled long-period gratings in photonic bandgap fibers using microparticles

We report the demonstration of rewritable self-assembled long-period gratings in air-core photonic bandgap fibers. The long-period gratings are written by filling the air-core region of the fiber with a solution containing polystyrene microspheres. The microspheres are self-assembled into a periodic structure as the liquid inside the fiber evaporates, forming the long-period grating. The formed grating can then be easily erased for rewriting purposes by connecting the end of the fiber to a microfluidic pump through a microfluidic channel and washing out the microparticles with an appropriate liquid. The same microfluidic system can also be used to fine control the writing process of the gratings. This technique creates possibilities for writing various different filtering functions in air-core photonic bandgap fibers by varying the composition and/or the shape of the used microparticles. The presented technique is potentially applicable to solid-core photonic crystal fibers as well.     

Impact of water and ice 1h formation in a photonic crystal fiber grating

The impact of ice 1h formation inside the holes of a photonic crystal fiber Bragg grating was analyzed and discussed. As a result of the ice's expansion, a broadening of the grating spectrum was observed that corresponds to internal microbending of the fiber and after some temperature cycling leads to failure of the fiber. An analytical model with which to estimate the internal compression forces is proposed, and the calculated values are found to be in agreement with reported data.     

亚百飞秒高功率掺镱大模面积光子晶体光纤飞秒激光放大器的实验研究

实验研究了掺镱双包层保偏大模面积光子晶体光纤飞秒激光放大器. 获得了平均功率达16W的飞秒激光放大输出,在50MHz重复频率下,对应的单脉冲能量达到320nJ. 增益光纤长3.5m,由于自相位调制效应,种子光脉冲光谱在放大过程中同时展宽,从而支持更窄的脉冲宽度. 经过光栅后,脉冲宽度压缩到了85fs. 系统中的振荡器和放大器基于同一种具有偏振结构的大模面积光子晶体光纤,具有很好的环境稳定性和进一步集成的可能. 关键词： 光子晶体光纤 大模场面积光纤 飞秒激光 光纤放大器     

A cheap and practical FBG temperature sensor utilizing a long-period grating in a photonic crystal fiber

A whole temperature sensor in one package utilizing a fiber Bragg grating (FBG) made in a conventional single-mode fiber and which uses a long-period grating (LPG) made in a photonic crystal fiber is proposed and experimentally demonstrated. The function of the interrogation is that the wavelength change of the FBG with environmental temperature is transferred to the intensity of the output via the LPG. Utilizing the temperature-insensitivity of the LPG in the PCF, the interrogation is stable and enables a cheap and practical temperature measurement system with a wide dynamic range.     

Highly sensitive refractometer with a photonic-crystal-fiber long-period grating

We present highly sensitive refractometers based on a long-period grating in a large-mode-area photonic crystal fiber (PCF). The maximum sensitivity is 1500 nm/refractive index unit at a refractive index of 1.33, to our knowledge the highest reported for any fiber grating. The minimal detectable index change is 2 x 10(-5). The high sensitivity is obtained by infiltrating the sample into the holes of the PCF to give a strong interaction between the sample and the probing field.