A Global Infrared Image Synthesis Model for Large-Scale Complex Urban Scene

Most of infrared scene models deal with backgrounds, they can't simulate infrared urban scene. This paper presents a global infrared image synthesis model for large-scale complex urban scene which can be applied to various weather conditions and suitable for various parts of the urban scene. We first analysis the influence of all kinds of meteorological and environmental factors on the infrared characteristic of urban scene. Then based on principle of energy equilibrium we propose a global infrared image synthesis model for urban scene, discuss the specific forms for various parts of the scene and compute their surface temperature. As the rendering principle for infrared scene differs from that for visible scene, we propose a novel rendering criterion for infrared scene. Finally by the method of Gouraud Shading of Computer Graphics, infrared images of urban scene from different viewpoints at different time are presented. Field measurement further shows that our model is robust and feasible.     

Generation of Realistic Infrared Image for Moving Objects

Most of current methods are available for synthesizing the static infrared scene, but fail to simulate the infrared signature of the objects caused by motion. This paper presents a new method for generating realistic infrared image of moving objects. Considering various environmental factors, object geometry and structure, internal heat conditions and state of movement, an infrared image synthesis model for moving objects is established. Based on this model the rendering method for infrared image of this kind of objects is proposed. By incorporating the effect of atmosphere transmission and the noise mechanism of infrared sensor, the infrared images of the working aircraft and automobile are successfully generated from different viewpoint. Experimental results illustrate the potential of our method.     

基于LLE的红外成像彩色化处理算法研究

针对红外图像对比度低、细节较差,且一般是黑白图像,不适宜于人眼观察,提出一种利用局部线性映射方法（LLE）的红外成像彩色化方法。该方法寻求灰度空间到色彩空间的映射,实现红外图像到彩色红外图像的转变,先将目标红外图像和彩色模板图像转换至YUV颜色空间,分离亮度和色彩信息;然后将目标红外图像的每个像素及邻域像素的灰度值串接成矢量,并均匀从彩色模板图像选取部分像素按相同方法串接成矢量,采用欧氏距离搜索最近邻并计算最佳的匹配系数,经色彩值（即U和V分量）计算将模板图像的彩色传递给目标红外图像后搜索亮度最大值的像素邻域并经自动阈值伪彩色编码处理,突出显示重要目标,得到处理后的彩色红外图像。将算法应用于实验室自主开发的热像仪,算法作用后的红外图像不但有了适于人眼视觉的彩色信息,而且用红、黄等敏感色突出了重点热目标,提高了人眼发现和识别目标的速度,实验结果表明,算法有利于侦察人员长时间的目标观察和识别目标。     

零视距地物长波红外特征场景仿真研究

为仿真地物长波红外场景图像,根据地表温度随时间变化的规律,并结合气象状况、背景材质、热特性参量、热状态等参数,在对太阳辐射、大气长波辐射、大气温度和地表热传导等影响地表温度变化的因素进行分析的基础上,建立了基于热平衡理论和热传导过程的方程。解算出多种常见地表一日之中的温度变化情况,并将其应用于由相同景物可见光纹理图像反演出的相应红外纹理图像中。在考虑景物表面自身发射、反射的辐射计算模型的前提下,生成了具有相似红外纹理细节的地表红外场景。结果表明,该方法可生成接近真实感的红外场景,有效地模拟仿真地物的长波红外特征。     

红外光学系统焦距测量的研究

红外光学系统是红外系统的关键组件,而焦距是光学系统重要的参数之一,它的测量直接影响到红外系统的定位精度和打击目标的准确率。传统的测量焦距的方法一直沿用可见光照明的放大率法,其测量精度受很多因素的制约。研制的测量红外光学系统焦距的系统,采用倒置放大率法测量方式,直接用红外光源照明放置在被测光学系统物方焦面上的玻罗板,用线...     

An Infrared Image Synthesis Model for High-Speed Targets

Although a number of infrared models are available for synthesizing the infrared image of static objects, they fail to simulate the infrared signature of targets flying at high speed. This paper presents an infrared image synthesis model for such kind of targets. Within this model, we account for not only all forms of heat transfer inside the targets but also the dynamic interaction between the target's surface and the surrounding air-flow. The heat transfer process between the target's surface and the air-flow is carefully analyzed based on the principles of infrared physics, aerodynamics and heat transfer, and a term due to aerodynamic heating is incorporated into our new model. Experimental results illustrate the potential of the model     

基于Vega的红外图像仿真

介绍了红外成像仿真的基本理论,讨论了利用Vega传感器模块将输入的可见目标图像生成红外图像的技术。该技术使用Creator软件进行三维几何建模和纹理映射,使用TMM软件进行红外材质建模;然后,用Mat软件进行大气衰减的计算;最后,用SensorWorks软件进行传感器特性建模,通过光电转换生成红外图像。以阿帕奇AH6直升机为例进行了红外图像仿真,结果表明,利用Vega传感器模块进行传感器建模,建模效果较好,成本低,易于工程实现。     

舰船尾迹和海面红外仿真成像

舰船在军事领域有着极其重要的地位,其尾迹对海面的温度和高度都会造成相较明显的变化,且具有持续时间长、不易消除等特点,所以模拟舰船尾迹和海面红外辐射图像可以更为直观地识别舰船目标,具有强烈的军事需求。以MODTRAN软件模拟的不同背景环境下大气对8μm～14μm波段的透过率为数据基础,结合Cox-Munk坡度概率分布模型并考虑海浪遮挡因素建立了一种舰船尾迹红外辐射模型,模拟了不同背景环境、不同探测距离的红外尾迹图像。仿真结果表明：相同探测条件下,随着探测距离增大,舰船尾迹辐射亮度减小,但粗糙海面对红外辐射的遮挡作用显著减弱,海面舰船尾迹更易被识别;大气传输模型对红外成像结果影响较大,夏季背景辐射能量大且海面平均遮挡作用小,舰船尾迹红外成像更为清晰。     

基于Vega的红外图像仿真

介绍了红外成像仿真的基本理论,讨论了利用Vega传感器模块将输入的可见目标图像生成红外图像的技术。该技术使用Creator软件进行三维几何建模和纹理映射,使用TMM软件进行红外材质建模;然后,用Mat软件进行大气衰减的计算;最后,用SensorWorks软件进行传感器特性建模,通过光电转换生成红外图像。以阿帕奇AH6直升机为例进行了红外图像仿真,结果表明,利用Vega传感器模块进行传感器建模,建模效果较好,成本低,易于工程实现。     

红外运动小目标的检测

通过分析天空背景下红外运动小目标、噪音以及背景的特征,提出一种检测方法·首先利用向量小波变换对运动图像进行预处理;其次采用图像差分进行目标的粗检测,提取出候选目标;最后可根据运动目标和噪音的特征对候选目标进行识别,检测出真实的运动小目标·实验证明,该方法可有效检测天空背景下红外运动小目标·