Zr-Cu-Ni-Al-Nb大块非晶合金的晶化行为、力学性能及电化学腐蚀行为的研究

利用水冷铜模铸造法成功制备了Zr_65-xCu_17.5Al_7.5Ni ₁₀Nb_x (x=0，2，5)大块非晶合金. X射线衍射、热分析研究结果表 明，Nb的添加显著改变了非晶合金的晶化行为，促进了二十面体准晶相的形成. 各合金的准 静态压缩实验表明，Nb的适量添加有利于提高大块非晶合金的强度和塑性. 其中x=5的大块 非晶合金的抗压强度σ_b和塑性应变量ε_p 关键词： Zr基大块非晶合金 晶化行为 力学性能 耐腐蚀性能     

压力对Zr46.75Ti8.25Cu7.5Ni10Be27.5大块非晶合金玻璃转变和晶化动力学的影响

利用X射线衍射和差示扫描量热分析研究了高温高压下Zr_46.75Ti_8.25Cu_7.5Ni₁₀Be_27.5大块非晶合金的玻璃转变和晶化行为，结果发现压力降低了该大块非晶合金中的自由体积、热焓和晶化激活能. 关键词： 大块非晶合金 高压 差示扫描量热分析 玻璃转变     

Zr-Al-Ni-Cu(Nb,Ti)大块非晶玻璃转变的动力学性质

以Zr-Al-Ni-Cu (Nb,Ti)大块非晶合金差示扫描量热分析实验为基础,利用Lasocka方程、Kissinger方程及Vogel-Fulcher-Tamman(VFT)方程对其玻璃转变的动力学性质从不同方面进行了研究.分析结果表明：玻璃转变表观激活能越小,则晶化转变激活能越大,表现出相反的难易程度,且玻璃转变表观激活能数值远较传统非晶要小,验证了大块非晶合金独特的结构特点及玻璃形成能力(GFA)强的原因.利用VFT方程对玻璃转变弛豫时间与升温速度的VFT曲线 进行了拟合,所算得的玻璃脆性参数m均在30左右,反映了Zr-Al-Ni-Cu (Nb,Ti)非晶合金强 的脆性属性.玻璃转变处Lasocka关系的B值、原子表观激活能及玻璃脆性参数均反映了相同的GFA大小趋势,从不同方面进一步揭示了非晶合金玻璃转变区间的动力学行为与GFA之 间的密切联系,可作为判断非晶合金GFA强弱的重要依据. 关键词： 玻璃转变 玻璃形成能力 表观激活能 玻璃脆性参数     

铸锭凝固组织对相应非晶合金晶化过程中二十面体准晶相形成动力学的影响

通过在真空电弧熔炼炉内对合金铸锭进行反复熔炼处理，获得到了凝固组织不同的Zr₆₅Al_7.5Cu_12.5Ni₁₀Ag₅合金铸锭.在相同的制备条件下，由凝固组织不同的合金铸锭通过吸铸法制备得到了薄片非晶合金.利用差示扫描量热法(DSC)对非晶合金的晶化动力学进行了分析.x射线衍射谱表明，在Zr₆₅Al_7.5Cu_12.5Ni₁₀Ag₅非晶合金晶化过程中，二十面体准晶相(I相)作为初生相析出.Kissinger分析结果表明，合金铸锭的凝固组织细化，相对应的非晶合金发生晶化时，I相形成与分解的有效激活能都增大，说明非晶合金及析出的I相的热稳定性都提高.从结构的遗传性角度就合金铸锭凝固组织对相应非晶合金晶化过程中二十面体准晶相的形成动力学的影响进行了讨论. 关键词： 二十面体准晶相 晶化动力学 凝固组织     

Zr-Al-Ni-Cu(Nb,Ti)大块非晶玻璃转变的动力学性质

以Zr Al Ni Cu(Nb ,Ti)大块非晶合金差示扫描量热分析实验为基础 ,利用Lasocka方程、Kissinger方程及Vogel Fulcher Tamman(VFT)方程对其玻璃转变的动力学性质从不同方面进行了研究 .分析结果表明 :玻璃转变表观激活能越小 ,则晶化转变激活能越大 ,表现出相反的难易程度 ,且玻璃转变表观激活能数值远较传统非晶要小 ,验证了大块非晶合金独特的结构特点及玻璃形成能力 (GFA)强的原因 .利用VFT方程对玻璃转变弛豫时间与升温速度的VFT曲线进行了拟合 ,所算得的玻璃脆性参数m均在 30左右 ,反映了Zr Al Ni Cu(Nb ,Ti)非晶合金强的脆性属性 .玻璃转变处Lasocka关系的B值、原子表观激活能及玻璃脆性参数均反映了相同的GFA大小趋势 ,从不同方面进一步揭示了非晶合金玻璃转变区间的动力学行为与GFA之间的密切联系 ,可作为判断非晶合金GFA强弱的重要依据     

Al-Ni-RE非晶合金的晶化行为和热稳定性

本文制备了一系列Al-Ni-RE (RE=La, Ce, Y) 非晶合金薄带, 利用差示量热扫描仪和X射线衍射仪考察了非晶合金的晶化行为和初生相, 并分析了其与合金成分和原子特性间的关系. 结果表明: 在拓扑不稳定参数λ以有效原子半径修正为λ'后, 每一Al-Ni-RE非晶合金体系可由其两个临界值划分为纳米晶、纳米玻璃和玻璃三类; Al-Ni-RE非晶合金的晶化开始温度和混合焓与λ'成良好的线性关系, 即λ'能很好的表征Al基非晶合金的热稳定性. 关键词： Al基非晶 玻璃转变 初生相 热稳定性     

Zr60Al15Ni25大块非晶合金晶化动力学研究

通过等温示差扫描量热法研究了Zr₆₀Al₁₅Ni₂₅大块非 晶合金的晶化动力学.实验结果表明，晶化过程的孕育期很短，即使在743 K这样低的温度下也不过0.52 min，而放热峰宽（反应整个晶化过程进行的时间）却随退火温度的降低明显增大，这说明了结晶过程是一个晶核长大控制的过程.Avrami指数表明在不同的退火温度，该合金的晶化机制发生了变化.晶化机制的变化是由于合金原子在不同温度下的扩散能力相差很大所致. 关键词： 晶化动力学 60Al₁₅Ni₂₅大块非晶合金')" href="#">Zr₆₀Al₁₅Ni₂₅大块非晶合金 示差扫 描量热法（DSC）     

压力对Zr46.75Ti8.25 Cu7.5Ni10Be27.5大块非晶合金玻璃转变和晶化动力学的影响

利用X射线衍射和差示扫描量热分析研究了高温高压下Zr46.75Ti8.25Cu7.5Ni10Be27.5大块非晶合金的玻璃转变和晶化行为,结果发现压力降低了该大块非晶合金中的自由体积、热焓和晶化激活能.     

Zr基大块非晶中添加元素对非晶形成能力及耐蚀性的影响

运用实空间递归方法研究了添加元素Nb,Ta,Y,La对Zr基非晶合金的非晶形成能力和耐腐蚀性能的影响.用计算机编程构造了Zr基非晶中初始晶化相Zr₂Ni的原子结构模型,用Zr₂Ni中的二十面体原子团簇模拟非晶中的二十面体团簇.计算了替代二十面体中心或顶角位置原子前后Ni,Zr及合金元素的局域态密度、团簇中心Ni与近邻Zr原子及Ni与替代元素Nb,Ta,Y,La间的键级积分,还计算了合金元素替代前后团簇的费米能级.局域态密度计算结果表明：合金元素Cu占据二十面体团 关键词： 电子结构 Zr基大块非晶 非晶形成能力 耐蚀性     

20GeS2·80Sb2S3硫系玻璃的析晶行为及动力学机理研究

实现玻璃微晶化过程控制的基础是要充分认识其析晶行为及动力学机理. 利用示差扫描量热法和析晶热处理等手段, 研究发现 20GeS₂·80Sb₂S₃硫系玻璃属于表面析晶, 在268℃(T_g+30℃)下热处理60 h, 可以获得表面约40 μm的Sb₂S₃晶层复合玻璃陶瓷样品. 在此基础上, 利用非等温法从理论上分析该玻璃的析晶动力学机理. 计算得到其析晶活化能E_c为(223.6±24.1)kJ·mol^-1, 在热处理温度(268℃)下的析晶速率常数K为1.23×10^-4 s^-1, 属于较难析晶的玻璃组成; 玻璃的晶体生长指数m和晶体生长维数n均为2, 表明其Sb₂S₃相的析晶行为是二维生长过程, 与析晶实验结果完全相符. 由此可知, 对于Sb₂S₃晶体复合的硫系玻璃陶瓷样品可通过玻璃粉末压片烧结、带铸法或丝网印刷法制备获得, 为今后功能硫系玻璃的开发提供实验依据和理论指导. 关键词： 硫系玻璃 微晶化 析晶动力学 析晶行为     

The Effect of Ion Irradiation on Nanocrystallization and Surface Relief of a Ribbon from Fe72.5Cu1Nb2Mo1.5Si14B9 Alloy

Russian Physics Journal - Using the methods of X-ray diffraction and atomic force microscopy, the process of crystallization of an amorphous Fe72.5Cu1Nb2Mo1.5Si14B9 alloy irradiated with...     

Fe73.5Cu1Nb3Si13.5B9非晶合金的激波纳米晶化速率和晶化度的对比研究

对Fe735Cu1Nb3Si135B9等非晶合金进行了退火和激波诱导两种方式的晶化实验以及XRD和DSC分析.着重对合金的晶化速率和晶化度等特性展开了研究和讨论.进一步证实了激波纳米晶化是一种包含着新机理的寓意丰富的晶化现象.也再次验证了作者曾经提出过的“激波流化相变”模型的合理性. 关键词： 非晶合金 激波 纳米晶化     

Partial crystallization of an amorphous alloy by electronic energy deposition

The first experimental evidence is reported of crystallization induced in an amorphous alloy by a high density of electronic excitation deposited along the path of swift heavy ions. The formation of nanocrystalline iron boride phases was observed in an amorphous Fe73.5Cu1Nb3Si13.5B9 alloy irradiated at low temperature with 5 GeV Pb ions up to fluences of 1 x 10(11) ions cm-2. No evidence for the formation of the Fe(Si) phase was found. This phenomenon was interpreted in terms of the relaxation of the high level of energy deposited in electronic excitations along the path of Pb ions in the target, which induces extensive stress and strain that could destabilize the amorphous structure.     

非晶态Cu_(56)Zr_(44)合金的结构及其等温退火晶化过程的研究

利用X射线衍射技术、差示扫描量热分析技术和透射电子显微镜研究了非晶态Cu56 Zr4 4合金的结构及其等温退火条件下的晶化过程 .实验结果表明 ,非晶态Cu56 Zr4 4合金在室温下的短程结构类似于硬球无规密堆积分布 .在70 3K过冷液相区内等温退火时发现 ,当退火时间为 3min时 ,晶化产物主要为Cu8Zr3相 ;当退火时间为 6min时 ,Cu8Zr3相完全消失 ,而Cu1 0 Zr7相大量析出 ;当退火时间达到 3 0min以上时 ,其晶化产物转变为Cu1 0 Zr7,CuZr2 ,Cu8Zr3等多种化合物 .由此提出了非晶态Cu56 Zr4 4合金等温退火晶化过程的扩散机理 .     

平面冲击波高速撞击下Zr41Ti14Cu12.5Ni10Be22.5大块非晶合金的损伤与断裂

 利用二级轻气炮研究了在平面冲击波高速撞击下，Zr₄₁Ti₁₄Cu_12.5Ni₁₀Be_22.5大块非晶合金的损伤与断裂行为。实验结果表明：在高速冲击压缩下，大块非晶合金断裂面的角度小于通常压缩情况的角度，这是由高速撞击下材料极高的应变速率决定的；极高的应变速率变形和局域绝热剪切加热造成局部熔化；在温度和压力的共同作用下，非晶合金发生晶化现象。     

Nb含量对FeSiBCuNb系铁基纳米晶合金结构和磁学性能的影响

为模拟Nb含量对FeSiBCuNb系铁基纳米晶合金结构和磁学性能的影响,采用Amorphous模块构建了Fe_88-xSi₉B₂CuNb_x(x=1,3,5,7)的硬球密剁模型,通过分子动力学方法进行弛豫,淬火以及退火处理,得到了Fe_88-xSi₉B₂CuNb_x(x=1,3,5,7)铁基纳米晶合金结构.基于第一性原理的计算方法,分析了不同Nb含量的铁基纳米晶合金的晶体结构和磁学性能.结果表明:随着Nb含量的增加,体系的晶格常数和体积都有所增大,导电性减小,磁矩不断减小,并且Fe的3d轨道是体系磁矩的主要贡献者,Nb元素对体系非晶化的形成有一定的作用.     

Evolution of local atomic structure in a melt-spun Ni25Ti50Cu25 shape memory alloy during crystallization

The local atomic environment of a melt-spun Ni₂₅Ti₅₀Cu₂₅ amorphous alloy and bond evolution during crystallization were studied by extended X-ray absorption fine structure (EXAFS) spectroscopy and differential scanning calorimetry. In the amorphous alloy, the interatomic distances of Ni–Ti and Cu–Ti are distinct from Ti–Ti and can be indicative of the formation of two types of dominant polyhedra or distorted polyhedral clusters centered with Ni and Cu, with the majority of shell atoms being Ti. The overall increase in the coordination numbers of Ni, Ti, and Cu by crystallization and evidence for structural relaxation suggest that the melt-spun ribbon contains a combination of ordered structures and free volume prior to the heat treatment. Copper and nickel are co-located as their absorption spectra are similar. Although crystallization occurs rapidly (within 4?min at 500 °C), the local atomic environment change persists at longer annealing durations (up to 10?min). An increase in the Ti–Ti and Cu–Cu homo-bond fractions at short and intermediate annealing times suggests that these species segregate between Cu-rich and Cu-poor phases. Crystallization continues through a short-range Ti and Cu diffusion-dominated process, as the near-neighbor structures of Ti and Cu change considerably more than for Ni during annealing. This homogenizes the microstructure followed by possible precipitation of a TiCu compound.     

Determination of activation energy for crystallizations in Ni–Cu–P amorphous alloys

The effect of plastic deformation on the crystallization kinetics of the ternary Ni–Cu–P amorphous alloy coatings prepared by electroless plating was investigated using differential scanning calorimetry. It was shown that the effective crystallization activation energy of the amorphous coatings is pronouncedly affected by the plastic deformation, indicating a decreasing tendency with deformation, the effective activation energy decreases from 199.02 to 163.71?kJ?mol^?1 as the plastic deformation from 0% to 40%. And, accordingly, this leads to the decrease of crystallization temperature. Analyses were presented to discuss the possible mechanism for the notable effects of plastic deformation on the crystallization kinetics of the amorphous coatings.     

De-vitrification of nanoscale phase-separated amorphous thin films in the immiscible copper–niobium system

Copper and niobium are mutually immiscible in the solid state and exhibit a large positive enthalpy of mixing in the liquid state. Using vapour quenching via magnetron co-sputter deposition, far-from equilibrium amorphous Cu–Nb films have been deposited which exhibit a nanoscale phase separation. Annealing these amorphous films at low temperatures (~200?°C) initiates crystallization via the nucleation and growth of primary nanocrystals of a face-centred cubic Cu-rich phase separated by the amorphous matrix. Interestingly, subsequent annealing at a higher temperature (>300?°C) leads to the polymorphic nucleation and growth of large spherulitic grains of a body-centred cubic Nb-rich phase within the retained amorphous matrix of the partially crystallized film. This sequential two-stage crystallization process has been investigated in detail by combining transmission electron microscopy [TEM] (including high-resolution TEM) and atom probe tomography studies. These results provide new insights into the crystallization behaviour of such unusual far-from equilibrium phase-separated metallic glasses in immiscible systems.     

Microstructure and magnetic properties of Fe72.5Cu1M2V2Si13.5B9 (M=Nb, Mo, (NbMo), (MoW)) nanocrystalline alloys

The microstructure and magnetic properties of Finemet-type Fe_72.5Cu₁M₂V₂Si_13.5B₉ (M=Nb, Mo, (NbMo), (MoW)) alloys have been systematically studied. Results show that the nanocrystalline alloy with M=NbMo has the smallest grain size of about 8 nm. The order of the effect of Nb, Mo and W additions in decreasing the α-Fe grain size in nanocrystalline alloys is Nb>Mo>W. The best DC soft magnetic properties are obtained in the alloy with M=Nb. In the case of AC soft magnetic properties, the Nb alloy also exhibits a very low core loss comparing with typical Finemet alloy. Therefore, the Nb alloy is suitable for use as a transformer core material. In addition, it is shown that a narrow grain size distribution and a uniform dispersion of α-Fe grains in the amorphous matrix are very crucial for the development of new Finemet-type nanocrystalline alloys with good soft magnetic properties.