Characterization of size, surface charge, and agglomeration state of nanoparticle dispersions for toxicological studies

Characterizing the state of nanoparticles (such as size, surface charge, and degree of agglomeration) in aqueous suspensions and understanding the parameters that affect this state are imperative for toxicity investigations. In this study, the role of important factors such as solution ionic strength, pH, and particle surface chemistry that control nanoparticle dispersion was examined. The size and zeta potential of four TiO₂ and three quantum dot samples dispersed in different solutions (including one physiological medium) were characterized. For 15 nm TiO₂ dispersions, the increase of ionic strength from 0.001 M to 0.1 M led to a 50-fold increase in the hydrodynamic diameter, and the variation of pH resulted in significant change of particle surface charge and the hydrodynamic size. It was shown that both adsorbing multiply charged ions (e.g., pyrophosphate ions) onto the TiO₂ nanoparticle surface and coating quantum dot nanocrystals with polymers (e.g., polyethylene glycol) suppressed agglomeration and stabilized the dispersions. DLVO theory was used to qualitatively understand nanoparticle dispersion stability. A methodology using different ultrasonication techniques (bath and probe) was developed to distinguish agglomerates from aggregates (strong bonds), and to estimate the extent of particle agglomeration. Probe ultrasonication performed better than bath ultrasonication in dispersing TiO₂ agglomerates when the stabilizing agent sodium pyrophosphate was used. Commercially available Degussa P25 and in-house synthesized TiO₂ nanoparticles were used to demonstrate identification of aggregated and agglomerated samples.     

Comparison of nanoparticle measurement instruments for occupational health applications

Nanoparticles are used in many applications because of their novel properties compared to bulk material. A growing number of employees are working with nanomaterials and their exposure to nanoparticles trough inhalation must be evaluated and monitored continuously. However, there is an ongoing debate in the scientific literature about what are the relevant parameters to measure to evaluate exposure to level. In this study, three types of nanoparticles (ammonium sulphate, synthesised TiO₂ agglomerates and aerosolised TiO₂ powder, modes in a range of 30–140 nm mobility size) were measured with commonly used aerosol measurement instruments: scanning and fast mobility particle sizers (SMPS, FMPS), electrical low pressure impactor (ELPI), condensation particle counter (CPC) together with nanoparticle surface area monitor (NSAM) to achieve information about the interrelations of the outputs of the instruments. In addition, the ease of use of these instruments was evaluated. Differences between the results of different instruments can mainly be attributed to the nature of test particles. For spherical ammonium sulphate nanoparticles, the data from the instruments were in good agreement while larger differences were observed for particles with more complex morphology, the TiO₂ agglomerates and powder. For instance, the FMPS showed a smaller particle size, a higher number concentration and a narrower size distribution compared with the SMPS for TiO₂ particles. Thus, the type of the nanoparticle was observed to influence the data obtained from these different instruments. Therefore, care and expertise are essential when interpreting results from aerosol measurement instruments to estimate nanoparticle concentrations and properties.     

Characterization of Y<Subscript>2</Subscript>BaCuO<Subscript>5</Subscript> nanoparticles synthesized by nano-emulsion method

Nanoscale yttrium–barium–copper oxide (Y₂BaCuO₅, Y211) particles were synthesized using the emulsion method and the solution method. The basic water-in-oil (w/o) emulsion system consisted of n-octane (continuous oil phase), cetyltrimethylammonium bromide (cationic surfactant), butanol (cosurfactant) and water. The composition of the emulsion system was varied and characterized by measuring the conductivity of the solutions and droplet size. The droplet size of emulsion was determined by using the dynamic light scattering method. The water content, cosurfactant content, and surfactant/n-octane ratio affected the droplet size which was in the range of 3–8 nm, and hence the w/o emulsion system was referred to as a nano-emulsion system. A model was used to verify the droplet size. The influence of salt (Y₂(NO₃)₃) content on the droplet size was investigated and the addition of salt reduced the droplet size. The effects of reaction time and temperature on the Y211 particle sizes were also investigated. The particles were characterized using the TEM, SEM, and XRD. Nanoparticles produced by the nano-emulsion method were calcined at 850°C to form the Y211 phase as compared to solid state processing temperature of 1050°C. Based on the TEM analysis, the average diameter of the Y211 particles produced using the nano-emulsion method was in the range of 30–100 nm. The effect of adding 15% Y211 nanoparticles to the superconductor YBCO-123 as flux pinning centers, was investigated, and the transition temperature was reduced by 3 K.     

Dispersion stability of nanoparticles in ecotoxicological investigations: the need for adequate measurement tools

One of the main challenges in nanoecotoxicological investigations is in the selection of the most suitable measurement methods and protocols for nanoparticle characterisation. Several parameters have been identified as being important as they govern nanotoxicological activity, with some parameters being better defined than others. For example, as a parameter, there is some ambiguity as to how to measure dispersion stability in the context of ecotoxicological investigations; indeed, there is disagreement over which are the best methods to measure nanoparticle dispersion stability. The purpose of this article is to use various commercially available tools to measure dispersion stability and to understand the information given by each tool. In this study, CeO₂ was dispersed in two different types of media: de-ionised water and electrolyte-containing fish medium. The DLS mean particle size of freshly dispersed sample in DI water was ~200 nm in diameter. A visual sedimentation experiment showed that nanoparticle dispersion made in the fish medium was less stable compared to corresponding dispersion in de-ionised water. Stability of these dispersions was monitored using various techniques, for a period of 3 days. Our findings have shown that dispersion stability can be suitably assessed by monitoring: (a) surface charge, (b) sedimentation events and (c) presence of agglomerates, through time. The majority of techniques employed here (zeta potential, particle size via DLS, fluorescence and UV–Vis spectroscopy and SEM) were shown to provide useful, complementary information on dispersion stability. Nanoparticle Tracking Analysis (NTA) provides useful, quantitative information on the concentration of nanoparticles in suspension, but is limited by its inability to accurately track the motion of large agglomerates found in the fish medium.     

Stimulated Low-Frequency Raman Scattering in LaF<Subscript>3</Subscript> Suspensions

We observe stimulated low-frequency Raman scattering (SLFRS) caused by laser pulse interaction with acoustic vibrations of nanoparticles in water suspensions of LaF₃ nanoparticles. We show that frequency shifts of the scattering correspond to the eigenfrequencies of nanoparticles vibrations. LaF₃ nanoparticles were synthesized in the presence of glycine by a double jet precipitation technique at various initial concentrations of reagents. We investigate the morphologies and particle sizes as well as size distributions of the particles prepared using transmission electron microscopy (TEM) and dynamical light scattering (DLS). In view of the absorption spectroscopy, we show that the reaction system components and products have no absorption in the visible region, including λ = 694.3 nm. From the luminescence spectroscopy, we find also that they do not emit at λ = 694.3 nm excitation.     

Low-frequency Raman scattering from CeO<Subscript>2</Subscript> nanoparticles

Raman scattering measurements were performed on CeO₂ nanoparticles at room temperature. Low-frequency modes are assigned to confined acoustic vibrations of spherical CeO₂ nanoparticles. Frequencies of these vibrational modes have been calculated in the elastic continuum approximation, which considers a nanoparticle as a homogeneous elastic sphere. We assumed stress-free boundary conditions. The specific dependence of the vibrational frequency on the particle diameter enables the determination of the particle size from the experimental Raman frequency. The particle size value calculated in this way agrees well with the value acquired from the phonon confinement model. PACS 61.46.Df; 73.63.Bd; 63.22.+m     

Effect of the primary particle morphology on the micromechanical properties of nanostructured alumina agglomerates

Depending on the application of nanoparticles, certain characteristics of the product quality such as size, morphology, abrasion resistance, specific surface, dispersibility and tendency to agglomeration are important. These characteristics are a function of the physicochemical properties, i.e. the micromechanical properties of the nanostructured material. The micromechanical properties of these nanostructured agglomerates such as the maximum indentation force, the plastic and elastic deformation energy and the strength give information on the product properties, e.g. the efficiency of a dispersion process of the agglomerates, and can be measured by nanoindentation. In this study a Berkovich indenter tip was used for the characterisation of model aggregates out of sol–gel produced silica and precipitated alumina agglomerates with different primary particle morphologies (dimension of 15–40 nm). In general, the effect of the primary particle morphology and the presence or absence of solid bonds can be characterised by the measurement of the micromechanical properties via nanoindentation. The micromechanical behaviour of aggregates containing solid bonds is strongly affected by the elastic–plastic deformation behaviour of the solid bonds and the breakage of solid bonds. Moreover, varying the primary particle morphology for similar particle material and approximately isotropic agglomerate behaviour the particle–particle interactions within the agglomerates can be described by the elementar breaking stress according to the formula of Rumpf.     

Structural and magnetic properties of size-controlled Mn<Subscript>0.5</Subscript>Zn<Subscript>0.5</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles and magnetic fluids

Mn_0.5Zn_0.5Fe₂O₄ ferrite nanoparticles with tunable Curie temperature and saturation magnetization are synthesized using hydrothermal co-precipitation method. Particle size is controlled in the range of 54 to 135 Å by pH and incubation time of the reaction. All the particles exhibit super-paramagnetic behaviour at room temperature. Langevin’s theory incorporating the interparticle interaction was used to fit the virgin curve of particle magnetization. The low-temperature magnetization follows Bloch spin wave theory. Curie temperature derived from magnetic thermogravimetric analysis shows that Curie temperature increases with increasing particle size. Using these particles magnetic fluid is synthesized and magnetic characterization is reported. The monolayer coating of surfactant on particle surface is confirmed using thermogravimetric measurement. The same technique can be extended to study the magnetic phase transition. The Curie temperature derived using this measurement complies with the low-temperature magnetic measurement. The room-temperature and high-temperature magnetization measurements are also studied for magnetic fluid systems. The magnetic parameters derived for fluid are in good agreement with those obtained for the particle system.     

Synthesis and characterization of MoO<Subscript>3</Subscript> nanostructures by solution combustion method employing morphology and size control

Molybdenum oxide nanostructures were synthesized utilizing the solution combustion method where the ammonium molybdate powder and an organic additive were used as precursors. Different organic additives including ethylene diamine tetra-acetic acid (EDTA), polyethylene glycol 200 (PEG 200), sorbitol and urea were used as surfactants in order to investigate the effect of additive structure on morphology and particle size of products. Also various reaction parameters such as the additive/Mo molar ratio, concentration of metal ion in solution, pH of the reaction, and temperature of the synthesis media were changed to study effects on product morphology and size. Outcomes were characterized by Scanning Electron Microscopy (SEM), X-ray diffraction, and Transmission Electron Microscopy (TEM) techniques. Results show a variety of MoO₃ nanoparticles and nanorods produced within the size range of 10–80 nm. Furthermore, microrods and microsheets were also obtained through this method whose length varied in the order of microns.     

Diversity of TiO<Subscript>2</Subscript> nanopowders’ characteristics relevant to toxicity testing

In this study, the physicochemical properties of several commercial ultrafine TiO₂ powders and their behaviour in the as-received form and colloidal suspensions were analysed. Besides the particle size, the morphology and agglomeration state of the dry powders, dispersibility, ζ-potential and sedimentation in water and in phosphate-buffered saline (PBS) were studied. Also, leaching of ions from the powders during ageing in physiological solution and the ability of the photoactivated powders to decompose organic substances were evaluated. The examined TiO₂ powders revealed diversified characteristics when dispersed in water. In general, while in dry conditions the particle size appeared in the nano-range (down to 32 nm), the particles were agglomerated in aqueous suspensions at pH ~7 and only a minor amount showed dimensions below 200 nm, but none below 100 nm. The inherent pH of the 3 % suspensions varies from 3.7 to 7.5 and the surface charge at these pH values varied from highly positive to highly negative values. In PBS, the surface charge is negative and relatively low for all the samples, which resulted in agglomeration. Five out of six powders exhibited significant photocatalytic activity when exposed to UV irradiation. This also includes one cosmetic-grade powder. Furthermore, during the immersion in aqueous media at physiological temperature, the powders released foreign ions, which might also contribute to the results of cytotoxicity tests. The results revealed the major role of the particle surface charge and its impact on particle dispersion or agglomeration. Due to the high ionic strength in the liquids relevant for cell-surface interaction tests, for all the examined titania powders the nanoparticulate character was lost. However, the presence of impurities and photocatalysis might further contribute to the results of cytotoxicity tests.     

Agglomeration,isolation and dissolution of commercially manufactured silver nanoparticles in aqueous environments

The increasing use of manufactured nanoparticles ensures these materials will make their way into the environment. Silver nanoparticles in particular, due to use in a wide range of applications, have the potential to get into water systems, e.g., drinking water systems, ground water systems, estuaries, and/or lakes. One important question is what is the chemical and physical state of these nanoparticles in water? Are they present as isolated particles, agglomerates or dissolved ions, as this will dictate their fate and transport. Furthermore, does the chemical and physical state of the nanoparticles change as a function of size or differ from micron-sized particles of similar composition? In this study, an electrospray atomizer coupled to a scanning mobility particle sizer (ES-SMPS) is used to investigate the state of silver nanoparticles in water and aqueous nitric acid environments. Over the range of pH values investigated, 0.5–6.5, silver nanoparticles with a bimodal primary particle size distribution with the most intense peak at 5.0 ± 7.4 nm, as determined from transmission electron microscopy (TEM), show distinct size distributions indicating agglomeration between pH 6.5 and 3 and isolated nanoparticles at pH values from 2.5 to 1. At the lowest pH investigated, pH 0.5, there are no peaks detected by the SMPS, indicating complete nanoparticle dissolution. Further analysis of the solution shows dissolved Ag ions at a pH of 0.5. Interestingly, silver nanoparticle dissolution shows size dependent behavior as larger, micron-sized silver particles show no dissolution at this pH. Environmental implications of these results are discussed.     

A study of oleic acid-based hydrothermal preparation of CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles

Nearly monodisperse, well crystalline, superparamagnetic CoFe₂O₄ nanoparticles with diameter of 6 nm were synthesized in oleic acid–water–pentanol system at 180 °C. Hydrothermal procedure, as an efficient and environment friendly alternative to organic decomposition methods, was investigated by variation of reaction conditions, and the particle formation mechanism was finally proposed (i.e., hydrolysis of metal oleates in organic phase, with size of the particles (5–8 nm) controlled by polarity-driven precipitation into water phase). As-prepared particles were hydrophobic due to coating by oleic acid. Further modification with dimercaptosuccinic acid led to water-dispersible particles with hydrodynamic diameter of 20 nm. Prepared particles were investigated by TEM, XRD, ICP-AES, light scattering, SQUID magnetometry, and Mössbauer spectroscopy.     

Surface Modification of Magnetic Nanoparticles Using Gum Arabic

Magnetite nanoparticles were synthesized and functionalized by coating the particle surfaces with gum arabic (GA) to improve particle stability in aqueous suspensions (i.e. biological media). Particle characterization was performed using transmission electron microscopy (TEM) and dynamic light scattering (DLS) to analyze the morphology and quantify the size distribution of the nanoparticles, respectively. The results from DLS indicated that the GA-treated nanoparticles formed smaller agglomerates as compared to the untreated samples over a 30-h time frame. Thermogravimetric analyses indicated an average weight loss of 23%, showing that GA has a strong affinity toward the iron oxide surface. GA most likely contributes to␣colloid stability via steric stabilization. It was determined that the adsorption of GA onto magnetite exhibits Langmuir behavior.     

Nanoparticle dispersion effect of laser-surface melting in ZrB<Subscript>2p</Subscript>/6061Al composites

Zirconium diboride (ZrB_2p, 15 vol%)/6061 aluminum (Al) composites were fabricated via in situ reaction. The existence, morphologies, and dispersion degree of the in situ ZrB₂ particles with size from tens to hundreds of nanometers were studied by X-ray diffractometry, energy-dispersive X-ray spectroscopy, field-emission scanning electron microscopy, and high-resolution transmission electron microscopy. As the particle-settlement effect becomes dominant during the composite fabrication process, ZrB₂ nanoparticles agglomerate to a certain extent in some areas of the as-cast composites. A laser-surface melting (LSM) strategy was applied to disperse agglomerated ZrB₂ nanoparticles in as-cast composites, and the ZrB₂ nanoparticle dispersion is affected visibly by LSM. After LSM, nanoparticles tend to distribute along the grain boundary. Particle clusters were dispersed in an explosive orientation and the particle diffusion distance varied in terms of its radius and melt-viscosity vicinity. High-resolution transmission electron microscopy showed the existence of a subgrain structure near the ZrB₂–Al interface after LSM. This may increase the yield strength when a dislocation tangle forms.     

Influence of synthesis parameters on iron nanoparticle size and zeta potential

Zero valent iron nanoparticles are of increasing interest in clean water treatment applications due to their reactivity toward organic contaminants and their potential to degrade a variety of compounds. This study focuses on the effect of organophosphate stabilizers on nanoparticle characteristics, including particle size distribution and zeta potential, when the stabilizer is present during nanoparticle synthesis. Particle size distributions from DLS were obtained as a function of stabilizer type and iron precursor (FeSO₄·7H₂O or FeCl₃), and nanoparticles from 2 to 200 nm were produced. Three different organophosphate stabilizer compounds were compared in their ability to control nanoparticle size, and the size distributions obtained for particle volume demonstrated differences caused by the three stabilizers. A range of stabilizer-to-iron (0.05–0.9) and borohydride-to-iron (0.5–8) molar ratios were tested to determine the effect of concentration on nanoparticle size distribution and zeta potential. The combination of ferrous sulfate and ATMP or DTPMP phosphonate stabilizer produced stabilized nanoparticle suspensions, and the stabilizers tested resulted in varying particle size distributions. In general, higher stabilizer concentrations resulted in smaller nanoparticles, and excess borohydride did not decrease nanoparticle size. Zeta potential measurements were largely consistent with particle size distribution data and indicated the stability of the suspensions. Probe sonication, as a nanoparticle resuspension method, was minimally successful in several different organic solvents.     

A sonochemical-assisted synthesis and annealing temperature effect of La<Subscript>0.7</Subscript>Sr<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript> nanoparticles

This paper reports on the sonochemical-assisted synthesis of La_0.7Sr_0.3MnO₃ (LSMO) nanoparticles (NPs) which have a single-crystalline perovskite structure. The average particle size of LSMO NPs was controlled from about 40 to 120 nm by changing the annealing temperatures from 750 to 1050°C. The particle size, electrical resistivity, and ferromagnetic transition temperature of LSMO NPs were strongly dependent on the annealing temperature. A substantial decrease in resistivity and an enhancement in the insulator–metal transition temperature were found on increasing the annealing temperature. Furthermore, the enhancement in magnetization and paramagnetic–ferromagnetic (PM–FM) transition temperatures was observed as the annealing temperature increases.     

Controlled flame synthesis of αFe<Subscript>2</Subscript>O<Subscript>3</Subscript> and Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles: effect of flame configuration,flame temperature,and additive loading

Superparamagnetic iron oxide nanoparticles are used in diverse applications, including optical magnetic recording, catalysts, gas sensors, targeted drug delivery, magnetic resonance imaging, and hyperthermic malignant cell therapy. Combustion synthesis of nanoparticles has significant advantages, including improved nanoparticle property control and commercial production rate capability with minimal post-processing. In the current study, superparamagnetic iron oxide nanoparticles were produced by flame synthesis using a coflow flame. The effect of flame configuration (diffusion and inverse diffusion), flame temperature, and additive loading on the final iron oxide nanoparticle morphology, elemental composition, and particle size were analyzed by transmission electron microscopy (TEM), high-resolution TEM (HR-TEM), energy dispersive spectroscopy (EDS), and Raman spectroscopy. The synthesized nanoparticles were primarily composed of two well known forms of iron oxide, namely hematite αFe₂O₃ and magnetite Fe₃O₄. We found that the synthesized nanoparticles were smaller (6–12 nm) for an inverse diffusion flame as compared to a diffusion flame configuration (50–60 nm) when CH₄, O₂, Ar, and N₂ gas flow rates were kept constant. In order to investigate the effect of flame temperature, CH₄, O₂, Ar gas flow rates were kept constant, and N₂ gas was added as a coolant to the system. TEM analysis of iron oxide nanoparticles synthesized using an inverse diffusion flame configuration with N₂ cooling demonstrated that particles no larger than 50–60 nm in diameter can be grown, indicating that nanoparticles did not coalesce in the cooler flame. Raman spectroscopy showed that these nanoparticles were primarily magnetite, as opposed to the primarily hematite nanoparticles produced in the hot flame configuration. In order to understand the effect of additive loading on iron oxide nanoparticle morphology, an Ar stream carrying titanium-tetra-isopropoxide (TTIP) was flowed through the outer annulus along with the CH₄ in the inverse diffusion flame configuration. When particles were synthesized in the presence of the TTIP additive, larger monodispersed individual particles (50–90 nm) were synthesized as observed by TEM. In this article, we show that iron oxide nanoparticles of varied morphology, composition, and size can be synthesized and controlled by varying flame configuration, flame temperature, and additive loading.     

Size dependence of lattice parameter for SixGe1−x nanoparticles

The phenomenon of the influence of the size of a material on its properties has been predicted theoretically and was confirmed for many materials experimentally by many researchers. It is a purpose of this paper to increase understanding of the influence of size on properties for silicon, germanium and alloy silicon-germanium nanoparticles. The relationships between lattice parameter and inverse particle radius had been investigated. The data obtained from the experiments show an unpredicted result that the lattice parameter of the Si_xGe_1−x nanoparticle expands by up to 1.5% when the size of the particle decreases to 7 nm. A calibration technique for a higher precision measurement of the lattice parameter is presented. The particles under investigation were deposited on an amorphous carbon substrate in order to prevent the influence of the misfit between deposit and crystalline substrate on the particle’s behavior.     

Metal-on-oxide nanoparticles produced using laser ablation of microparticle aerosols

A continuous aerosol process has been studied for producing nanoparticles of oxides that were decorated with smaller metallic nanoparticles and are free of organic stabilizers. To produce the oxide carrier nanoparticles, an aerosol of 3–6 μm oxide particles was ablated using a pulsed excimer laser. The resulting oxide nanoparticle aerosol was then mixed with 1.5–2.0 μm metallic particles and this mixed aerosol was exposed to the laser for a second time. The metallic micron-sized particles were ablated during this second exposure, and the resulting nanoparticles deposited on the surface of the oxide nanoparticles producing an aerosol of 10–60 nm oxide nanoparticles that were decorated with smaller 1–5 nm metallic nanoparticles. The metal and oxide nanoparticle sizes were varied by changing the laser fluence and gas type in the aerosol. The flexibility of this approach was demonstrated by producing metal-decorated oxide nanoparticles using two oxides, SiO₂ and TiO₂, and two metals, Au and Ag.     

Characterisation of nanoparticle size and state prior to nanotoxicological studies

Before commencing any nanotoxicological study, it is imperative to know the state of the nanoparticles to be used and in particular their size and size distribution in the appropriate test media is particularly important. Particles satisfying standards can be commercially purchased; however, these invariably cannot be used directly and need to be dispersed into the relevant biological media. Often such changes in the environment or ionic strength, or a change in the particle concentration, results in some aggregation or a shift in the particle size distribution. Such unexpected aggregation, dissolution or plating out, if unaccounted for, can have a significant effect on the available nanoparticle dose and on interpretation of any results obtained thereafter. Here, we demonstrate the application of characterisation instrumentation that sizes nanoparticles based on their Brownian motion in suspension. Unlike classical light-scattering techniques, the nanoparticle tracking and analysis (NTA) technique allows nanoparticles to be sized in suspension on a particle-by-particle basis allowing higher resolution and therefore better understanding of aggregation than ensemble methods (such as dynamic light scattering (DLS) and differential centrifugation sedimentation (DCS)). Results will be presented from gold (standard) nanoparticles in biologically relevant media that emphasise the importance of characterisation of the nanoparticle dispersion. It will be shown how the NTA technique can be extended to multi-parameter analysis, allowing for characterization of particle size and light scattering intensity on an individual basis. This multi-parameter measurement capability allows sub-populations of nanoparticles with varying characteristics to be resolved in a complex mixture. Changes in one or more of such properties can be followed both in real time and in situ.