横观各向同性饱和地基上刚性圆板的扭转振动

通过解析方法研究了横观各向同性饱和半空间上刚性圆板在简谐扭转荷载作用下的振动问题．运用Hankel变换求解了横观各向同性饱和土的动力控制方程,结合混合边界条件得出了刚性基础的扭转对偶积分方程,并将对偶积分方程转化为第二类Fredholm积分方程求解了基础的扭转振动问题,同时给出了动力柔度系数,基础的角位移幅值和基底接触剪应力的表达式．通过数值算例研究了地基的各向异性程度对基础扭转振动的影响．     

薄板弯曲自由振动问题的高精度近似解析解及改进研究

对于薄板弯曲自由振动问题,已有如下方法:在Hamilton(哈密顿)体系下基于分离变量法得到挠度的解析形式,并建立自振频率联立方程组,给出求解振动频率和振型函数的方法.笔者指出该方法中所用挠度函数的解析式实际上是一种满足位移边界条件的高精度近似解,基于Rayleigh-Ritz(瑞利-里茨)法再次求近似频率后发现,原方法的近似解的精度很高.另外,对于含有固支、简支等不同的边界形式,恰当地选取不同位置作为坐标系的原点,得到含有频率的方程组的统一形式,且较为简洁.这些形式可基于四边固支、四边简支等边界条件的矩形板研究,依照板变形的对称性可验证频率方程组形式的正确性,并得到不同边界条件下频率方程形式之间的联系与转化.     

层状横观各向同性饱和地基上圆板的非轴对称振动

研究了层状横观各向同性饱和地基上弹性圆板的非轴对称振动问题．首先,通过方位角的Fourier变换,将圆柱坐标系下横观各向同性饱和土的三维动力方程转化为一阶常微分方程组,基于径向Hankel变换,建立问题的状态方程,求解状态方程后得到传递矩阵;其次,利用传递矩阵,结合层状饱和地基的边界条件、排水条件及层间接触和连续条件,给出了任意简谐激振力作用下层状横观各向同性饱和地基动力响应的通解;然后,按混合边值问题建立层状饱和地基上弹性圆板非轴对称振动的对偶积分方程,并将对偶积分方程化为易于数值计算的第二类Fredholm积分方程,并给出了算例．     

弹性地基上矩形板弯曲的CC型级数解

本文利用双变量函数的Stockes变换,用CC型级数求弹性地基上矩形板弯曲问题的解析解.以弹性地基上四边自由矩形板中点作用一集中力为例给出数字计算结果.     

功能梯度圆板的轴对称自由振动

基于三维弹性理论,用直接位移法求解了横观各向同性功能梯度圆板的轴对称自由振动,其材料特性沿板厚度方向按指数形式变化,在弹性简支和刚性滑动两种边界条件下得到了三维精确解,即它逐点满足基本方程和边界条件,最后给出了数值算例并与以前的工作进行了对比.该方法也可推广应用于材料特性沿板厚度任意变化情形.     

横观各向同性饱和地基与中厚圆板的非轴对称动力相互作用

研究横观各向同性饱和土地基上中厚弹性圆板的非轴对称振动问题,即首先利用Fourier展开和Hankel变换技术,求解了简谐激励下横观各向同性饱和土地基的非轴对称Biot波动方程,然后按混合边值问题建立地基与弹性中厚圆板非轴对称动力相互作用的对偶积分方程,并将对偶积分方程化为易于数值计算的第二类Fredholm积分方程．文末给出了算例．数值结果表明,在一定频率范围内,地基表面的位移幅值随激振频率增加而增大,随距离的增大以振荡形式衰减变化．     

解任意四边形板弯曲问题的样条有限元法

关于用样条函数解板的弯曲问题,[1]在1979年讨论了矩形板和菱形板的弯曲;[2]在1981年对简支边界条件的矩形板,用振动梁函数和B样条函数组合作为插值函数,得到了效率更高的算式;[3]在1984年对[2]作了补充,采用拉格朗日乘子法,得到了在各种边界条件下平板弯曲的近似解,但所讨论的仍然是矩形板.     

弹性混合板的振动和稳定问题

通过将非线性应变位移关系引入Hellinger-Reissner变分原理,推导出了各向异性板基于弹性理论下的振动和屈曲控制方程.用精细积分法研究了四边简支混合矩形板.精细积分法与传统的有限差分法相比,可以给出计算机精度允许的很精确的数值结果.所以,给出的混合板的振动和稳定的结果可以看作是近似解析的.这些结果可以作为衡量各种板理论准确性的一个标准.而且,非对称层合板中出现的各种耦合影响,比如弯扭耦合,拉弯耦合等在同一组控制方程里被考虑了.     

四边简支正交各向异性波纹型夹心矩形夹层板的固有频率

给出了一种把具有波纹型夹心的正交各向异性夹层板的控制方程组化为仅包含一个位移函数的单一方程的简单方法,从而获得了四边简支条件下其自由振动固有频率的精确解,同时还对两种具有重要实际意义的特殊情况进行了讨论。     

Size-Dependent Effects of Micro-Nano Mindlin Plates Based on the Couple Stress Theory北大核心CSCD

基于偶应力理论,建立了适用于微纳米结构的Mindlin板理论。考虑横向剪切变形和材料的尺度效应并引入长度尺寸参数,推导了各向同性微纳米Mindlin板的本构方程。根据板的平衡条件,进一步推导出用位移函数和转角函数表示的板的屈曲和振动控制方程。通过对位移和转角变量进行空间和时间域上的分离,得出了四边简支（SSSS）和对边简支、对边固支（SCSC）两种边界情况下微纳米板的屈曲和振动问题的解析解。然后利用MATLAB软件进行算例分析,获得了不同尺寸参数、长宽比、厚长比等情况下板的临界屈曲荷载和固有频率。研究结果与已有文献中的结果以及ABAQUS有限元仿真解进行对比,结果表明,不同参数下的三种方法得到的结果均十分接近。算例分析发现,尺度效应对屈曲载荷和固有频率都有显著影响。     

Accurate bending analysis of rectangular plates with two adjacent edges free and the others clamped or simply supported based on new symplectic approach

The symplectic geometry approach is introduced for accurate bending analysis of rectangular thin plates with two adjacent edges free and the others clamped or simply supported. The basic equations for rectangular plates are first transferred into Hamilton canonical equations. Using the symplectic approach, the analytic solution of rectangular thin plate with two adjacent edges simply supported and the others slidingly supported is derived. Accurate bending solutions of title problems are then obtained using the superposition method. The approach used in this paper eliminates the need to pre-determine the deformation function and is hence more reasonable than conventional methods. Numerical results are presented to demonstrate the validity and efficiency of the approach as compared with those reported in other literatures.     

Exact solutions for free flexural vibration of Lévy-type rectangular thick plates via third-order shear deformation plate theory

In this paper, exact closed-form solutions in explicit forms are presented for transverse vibration analysis of rectangular thick plates having two opposite edges hard simply supported (i.e., Lévy-type rectangular plates) based on the Reddy’s third-order shear deformation plate theory. Two other edges may be restrained by different combinations of free, soft simply supported, hard simply supported or clamped boundary conditions. Hamilton’s principle is used to derive the equations of motion and natural boundary conditions of the plate. Several comparison studies with analytical and numerical techniques reported in literature are carried out to demonstrate accuracy of the present new formulation. Comprehensive benchmark results for natural frequencies of rectangular plates with different combinations of boundary conditions are tabulated in dimensionless form for various values of aspect ratios and thickness to length ratios. A set of three-dimensional (3-D) vibration mode shapes along with their corresponding contour plots are plotted by using exact transverse displacements of Lévy-type rectangular Reddy plates. Due to the inherent features of the present exact closed-form solution, the present findings will be a useful benchmark for evaluating the accuracy of other analytical and numerical methods, which will be developed by researchers in the future.     

Static analysis of rectangular nano-plate using three-dimensional theory of elasticity

Analytical solution for bending of a simply supported rectangular graphene sheets based on three dimensional theory of elasticity, is studied employing non-local continuum mechanics. By applying the Fourier series solution to the both displacement and stress field along the in-plane rectangular coordinates direction, and to the governing equation and constitutive relations, the three-dimensional governing equations in term of displacement components can be obtained. Closed form solution for the bending behavior of nano-plate is obtained by exerting the surface tractions on the state equations. To validate the accuracy and convergence of the present approach, numerical results are presented and compared with the results available in the open literature. Effect of non-local parameter, aspect ratio, thickness to length ratio and half wave numbers in the bending behavior of plate are examined. Furthermore, these results may also serve as benchmark to further results into the two-dimensional plate theories.     

计及弯曲刚度的印刷运动薄膜横向振动控制研究

研究了不同边界条件下,计及弯曲刚度的轴向运动薄膜横向振动的主动控制问题.建立计及弯曲刚度的印刷运动薄膜的计算模型.利用有限差分法,对轴向运动薄膜的振动微分方程进行离散,推导出轴向运动矩形薄膜横向振动控制系统的状态方程.采用次最优控制法,对不同边界条件下轴向运动矩形薄膜横向振动进行主动控制研究.计算结果表明:采用次最优控制法能够在短时间内迅速、有效地降低运动薄膜的振动强度,并使之衰减趋近于0.作动器作用在固定位置点处时,对运动薄膜施加控制后,四边简支边界条件下的控制效果好.作动器作用在不同位置点处时,两种边界条件下中心点处的控制效果最好.计算证明次最优控制法能够有效地抑制印刷过程中计及弯曲刚度的轴向运动薄膜的横向振动,从而提高印刷套印精度,保证精密印刷质量.     

轴向运动粘弹性板的横向振动特性

研究了轴向运动粘弹性矩形薄板的动力特性和稳定性问题．从二维粘弹性微分型本构关系出发,建立了轴向运动粘弹性板的运动微分方程．采用微分求积法,对四边简支、一对边简支一对边固支两种边界条件下粘弹性板的无量纲复频率进行了数值计算．分析了薄板的长宽比、无量纲运动速度及材料的无量纲延滞时间对其横向振动及稳定性的影响．     

A two-variable first-order shear deformation theory considering in-plane rotation for bending,buckling and free vibration analyses of isotropic plates

This paper presents a two-variable first-order shear deformation theory considering in-plane rotation for bending, buckling and free vibration analyses of isotropic plates. In recent studies, a simple first-order shear deformation theory (S-FSDT) was developed and extended. It has only two variables by separating the deflection into bending and shear parts while the conventional first-order shear deformation theory (FSDT) has three variables. However, the S-FSDT provides incorrect predictions for the transverse shear forces on the insides and the twisting moments at the boundaries except simply supported plates since it does not consider in-plane rotation. The present theory also has two variables but considers in-plane rotation such that it is able to correctly predict the responses of plates with any boundary conditions. Analytical solutions are obtained for rectangular plates with two opposite edges that are simply supported, with the other edges having arbitrary boundary conditions. Numerical results of deflections, stress resultants, buckling loads and natural frequencies are presented with the FSDT, the S-FSDT and the present theory. Comparative studies demonstrate the effects of in-plane rotation and the accuracy of the present theory in predicting the bending, buckling and free vibration responses of isotropic plates.     

Analytical solutions of refined plate theory for bending,buckling and vibration analyses of thick plates

Analytical solutions for bending, buckling, and vibration analyses of thick rectangular plates with various boundary conditions are presented using two variable refined plate theory. The theory accounts for parabolic variation of transverse shear stress through the thickness of the plate without using shear correction factor. In addition, it contains only two unknowns and has strong similarities with the classical plate theory in many aspects such as equations of motion, boundary conditions, and stress resultant expressions. Equations of motion are derived from Hamilton’s principle. Closed-form solutions of deflection, buckling load, and natural frequency are obtained for rectangular plates with two opposite edges simply supported and the other two edges having arbitrary boundary conditions. Comparison studies are presented to verify the validity of present solutions. It is found that the deflection, stress, buckling load, and natural frequency obtained by the present theory match well with those obtained by the first-order and third-order shear deformation theories.     

边缘有弹性点支矩形板的横向振动*

本文研究了两对边简支、另两对边任意支承的自由边有弹性点支的矩形板的横向振动问题,提供了一种求其固有频率和振型的高精度解法,自由边上弹性点支的个数及位置均可任意,本文用脉冲函数表示弹性点支的反力和力矩,利用Fourier级数将脉冲函数沿边缘展开,从而得到了满足全部边界条件的特征方程,可求得任意精度的任意阶固有频率及振型.     

New benchmark solutions for free vibration of clamped rectangular thick plates and their variants

It is of significance to explore benchmark analytic free vibration solutions of rectangular thick plates without two parallel simply supported edges, because the classic analytic methods are usually invalid for the problems of this category. The main challenge is to find the solutions meeting both the governing higher order partial differential equations (PDEs) and boundary conditions of the plates, i.e., to analytically solve associated complex boundary value problems of PDEs. In this letter, we extend a novel symplectic superposition method to the free vibration problems of clamped rectangular thick plates, with the analytic frequency solutions obtained by a brief set of equations. It is found that the analytic solutions of clamped plates can simply reduce to their variants with any combinations of clamped and simply supported edges via an easy relaxation of boundary conditions. The new results yielded in this letter are not only useful for rapid design of thick plate structures but also provide reliable benchmarks for checking the validity of other new solution methods.     

Natural frequencies of rectangular Mindlin plates coupled with stationary fluid

The present study is concerned with the free vibration analysis of a horizontal rectangular plate, either immersed in fluid or floating on its free surface. The governing equations for a moderately thick rectangular plate are analytically derived based on the Mindlin plate theory (MPT), whereas the velocity potential function and Bernoulli’s equation are employed to obtain the fluid pressure applied on the free surface of the plate. The simplifying hypothesis that the wet and dry mode shapes are the same, is not assumed in this paper. In this work, an exact-closed form characteristics equation is used for the plate subjected to a combination of six different boundary conditions. Two opposite sides are simply supported and any of the other two edges can be free, simply supported or clamped. To demonstrate the accuracy of the present analytical solution, a comparison is made with the published experimental and numerical results in the literature, showing an excellent agreement. Then, natural frequencies of the plate are presented in tabular and graphical forms for different fluid levels, fluid densities, aspect ratios, thickness to length ratios and boundary conditions. Finally, some 3-D mode shapes of the rectangular Mindlin plates in contact with fluid are illustrated.