企业技术创新的多目标模糊决策模型及MATLAB实现

针对企业技术创新过程中的多目标决策优化问题的模糊性,运用多目标决策模糊集理论进行研究,建立数学模型并基于M ATLAB程序,较好地克服了过去各方案评价结果分辨率不高和优劣性评价的不足之处,并通过实证分析和计算机模拟计算,证实了模型的科学性,也说明模型具有较强的可靠性和实用性.     

基于熵的多目标多维模糊决策模型

顾及多目标多维决策中存在的模糊性和随机性,基于Jaynes的信息熵最大原理,提出一种模糊环境下带有主观监督因子和信息熵的目标函数,导出了新的计算模糊决策识别矩阵与目标权重的模糊交叉计算公式.该模型将基于目标的客观决策与主观决策有机结合起来,为求解最优模糊决策识别矩阵和确定目标最优权重提供了一种有效途径,并把信息熵作为评价决策优劣的指标,进一步发展了多目标多维模糊决策理论模型.将本文提出的模糊决策方法应用于16家电炉炼钢企业的模糊综合评价,取得了较为满意的效果.     

采购量分配决策模糊规划模型

供应商对形成企业的竞争力起着关键性的作用。采购决策中,采购商需要决策两方面的问题:应该选择哪些供应商以及在每一供应商应该采购多少。本文考虑了多目标性和目标的模糊性,同时为供应商选择和采购量分配提出了一个集成的决策模型。最后,通过一个算例阐释了该模型。     

需求不确定情况下的多周期生产批量决策

针对在市场需求不确定的情况下的中小制造型企业的生产批量决策优化问题进行研究,根据多周期生产情况下需求的不确定性,综合考虑缺货成本、库存成本和期初库存等因素,以多生产周期的总利润最大化为目标,建立生产批量决策模型,通过优化分析,得出其利润最大化下的最优生产批量,并通过敏感性分析讨论最优批量与多周期生产条件下的不确定需求等影响因素之间的关系.     

面向客户定制模式的供应链管理系统优化模型

建立供应链管理系统优化模型是构建高效率供应链以及发挥供应链优势的前提和基础 .本文建立了面向客户定制模式的集成的供应链管理系统优化模型 ,即一个多目标、具有约束的非线性混合规划模型 ,并提出了针对这种模型的求解思路 .通过对模型的仿真求解既可以优化选择供应链系统中涉及的相关协作企业 ,同时优化系统的订货、生产、库存策略 ,对构建高效率供应链管理系统具有重要意义 .     

基于混沌集群智能优化算法的多目标粗糙集属性约减

针对管理实践及大数据处理过程中具有多决策属性的粗糙集属性约减问题,将条件属性依赖度与知识分辨度进行结合构建属性权重,分别建立针对不同决策属性的约减目标函数,引入帕累托最优思想,将基于多决策属性的粗糙集属性约减问题转化为离散多目标优化问题。针对该问题的结构设计了具有集群智能优化思想的元胞自动机求解算法,在算法中引入基于个体的非支配解集平衡局部最优与全局最优的关系,引入混沌遗传算子增加种群多样性。以某铁路局设备安全风险处理数据为案例构建多决策属性粗糙集决策表进行优化计算并进行管理决策分析。研究发现:(1)相对于传统的NSGA-II与MO-cell算法,本文提出的算法具有更强的多目标属性挖掘性能;(2)帕累托最优思想可以较好地解释多决策属性粗糙集在管理实践中的意义。     

具有异质信息的风险投资商与投资企业双边匹配方法研究

鉴于风险投资商与投资企业双边匹配的特点及外界环境的复杂性与模糊性,构建了具有不同数据类型的风险投资商与投资企业双边匹配多目标优化模型,评价指标信息采用符合实际情况的实数、区间数、三角模糊数、语言变量、直觉模糊数来表示,同时利用熵权法处理风险投资商与投资企业关于各自评价指标的期望值求得评价指标的权重.选取评价指标的期望水平为参照点,基于前景理论,计算各评价指标的益损值,引入决策者风险偏好,得出风险投资商与投资企业满意度.最终构建风险投资商与投资企业多目标优化模型,并利用字典序法求解多目标优化模型·数值例子说明,所建模型与方法的可行性、有效性,可为解决风险投资商与投资企业匹配问题提供方法支持.     

非常规油气资源开发投资决策优化模型研究

非常规油气资源作为最现实的可替代能源,对其进行勘探和开发对于降低日益加大的石油供需矛盾缺口和确保国家能源安全均具有重要的战略意义。然而,非常规油气资源勘探开发十分复杂,开发投资决策好坏已经成为制约其能否实现规模化和产业化的关键问题,科学投资决策问题已逐步成为石油企业高层管理者的主要职责。针对非常规油气资源开发投资的多阶段多目标决策优化难题,以可供开发区块的资源分配为重点研究对象,从解决不同区块投资规模入手,运用多阶段决策、多目标决策和不确定多属性方案优选的方法理论,通过剖析非常规油气开发投资决策过程及其复杂性特征,将开发投资决策过程进行形式化描述并在计算机中加以实现,从而得以实现开发投资决策方案的动态性调整。本项研究不仅有助于深化多目标动态优化决策理论的研究,还为解决非常规油气资源开发投资决策难题提供一种新的思路和方法。     

基于集对分析联系数的区间数型多属性决策投影模型及其在基坑支护方案评价中的应用

多属性决策时因掌握的信息有限,加之问题本身的复杂性、不确定性以及人类思维的模糊性,其属性的精确值往往难以获取,常用区间数形式表示针对多属性决策中各指标区间数不能直接进行大小比较的问题,提出一种基于集对分析联系数的区间数型多属性决策投影模型.模型用备择方案在理想方案上的投影进行集结,根据区间数的误差分布形式,沟通区间数与联系数的关系,根据a+bi型联系数大小比较法则,综合评价方案优劣.以某大厦基坑支护拟用的4种方案优化选择为例,说明方法的应用与模糊优化理论模型和灰色物元分析优化模型进行了对比,得到的结果一致.     

基于可靠性理论的退化设备维修优化

设备可靠性、设备完好率等指标是衡量设备运行状态好坏的关键指标.以设备完好率、设备可靠性以及设备预防维修费用为决策目标,通过线性规划的方法对退化设备的预防维修策略进行了优化研究.在定量化模型中引入了设备检修的概念,并在此基础上构建了以可靠性为约束的预防维修费用模型和设备完好率模型,考虑到企业在生产活动的维修决策是靠多因素条件的约束,而构建了一个以维修费用、设备完好率、设备可靠性为决策目标的多目标规划模型,通过线性规划的方法求解了该策略下的最优维修策略.通过数值验证证明了模型的可行性.     

局部凸可分离空间中的Drop定理

本文给出两个局部凸可分离空间中的Drop定理,其中一个严格强于丘京辉建立的结果,也严格强于郑喜印建立的结果(限制到局部凸可分离空间),另一个则使丘京辉提出的“局部凸空间中的弱序列紧凸子集具有弱Drop性质”这一定理的证明变得较为简单了．     

Error bounds for spatial discretization and waveform relaxation applied to parabolic functional differential equations

The process of semi-discretization and waveform relaxation are applied to general nonlinear parabolic functional differential equations. Two new theorems are presented, which extend and improve some of the classical results. The first of these theorems gives an upper bound for the norm of the error of finite difference semi-discretization. This upper bound is sharper than the classical error bound. The second of these theorems gives an upper bound for the norm of the error, which is caused by both semi-discretization and waveform relaxation. The focus in the paper is on estimating this error directly without using the upper bound for the error, which is caused by the process of semi-discretization and the upper bound for the error, which is caused by the waveform relaxation method. Such estimating gives sharper error bound than the bound, which is obtained by estimating both errors separately.     

Wavelet Decomposition of Spherical Vector Fields with Respect to Sources

This article is concerned with an approach of modelling the Earth’s magnetic field as measured by satellites in terms of a special system of vector spherical harmonics and in terms of vector kernel functions, called vector scaling functions and wavelets. The main ingredient is the presentation of a system of vector spherical harmonics which separates a given spherical vector field with respect to its sources, i.e., the spherical vector field is separated into a part which is induced by sources inside the sphere, a part which is induced by sources outside the sphere and a part which is induced by sources on the sphere, which are, for example, currents crossing the sphere. Using this special system of vector spherical harmonics vector scaling functions and wavelets are constructed which keep the advantageous property of separating with respect to sources but which also allow a locally reflected modelling of the respective vector field. At the end of the article, the method is tested on real magnetic field data measured by the German geoscientific research satellite CHAMP.     

Bilevel multiplicative problems: A penalty approach to optimality and a cutting plane based algorithm

Bilevel programming has been proposed for dealing with decision processes involving two decision makers with a hierarchical structure. They are characterised by the existence of two optimisation problems in which the constraint region of the upper level problem is implicitly determined by the lower level optimisation problem. In this paper we focus on the class of bilevel problems in which the upper level objective function is linear multiplicative, the lower level one is linear and the common constraint region is a bounded polyhedron. After replacing the lower level problem by its Karush–Kuhn–Tucker conditions, the existence of an extreme point which solves the problem is proved by using a penalty function approach. Besides, an algorithm based on the successive introduction of valid cutting planes is developed obtaining a global optimal solution. Finally, we generalise the problem by including upper level constraints which involve both level variables.     

一种基于TOPSIS思想的改进灰色关联法及其在方案评估中的应用

提出了一种基于TOPSIS思想的改进灰色关联法,方法采用了TOPSIS思想,通过标准化处理,能够将灰色关联法给出的评估结果转换为,TOPSIS方法所要用到的与最优/最劣解的距离,从而给出一个稳定的评估结果,弥补了传统灰色关联法受全局极值影响大的缺点.经实例分析证明,方法可以应用于方案评估中,并能够得出可行、稳定、科学的评估结果.     

Existence and Regularity for Dynamic Viscoelastic Adhesive Contact with Damage

A model for the dynamic process of frictionless adhesive contact between a viscoelastic body and a reactive foundation, which takes into account the damage of the material resulting from tension or compression, is presented. Contact is described by the normal compliance condition. Material damage is modelled by the damage field, which measures the pointwise fractional decrease in the load-carrying capacity of the material, and its evolution is described by a differential inclusion. The model allows for different damage rates caused by tension or compression. The adhesion is modelled by the bonding field, which measures the fraction of active bonds on the contact surface. The existence of the unique weak solution is established using the theory of set-valued pseudomonotone operators introduced by Kuttler and Shillor (1999). Additional regularity of the solution is obtained when the problem data is more regular and satisfies appropriate compatibility conditions.     

Order Extensions and the Fixed Point Property

The purpose of this paper is to investigate how the fixed point property and its negation behave when a covering relation is added to the order. We prove that every finite ordered set which is not totally ordered and which is dismantlable by retractables, respectively by irreducibles, has an upper cover (in its extension lattice) which is also dismantlable by retractables, respectively by irreducibles. We also provide examples of finite ordered sets having the fixed point property so that none of their upper covers has the fixed point property. Part of this work was done while the author was visiting Brandon University. The author thanks M. Roddy for his hospitality and financial support.     

Dual reciprocity hybrid radial boundary node method for the analysis of Kirchhoff plates

A meshless method of dual reciprocity hybrid radial boundary node method (DHRBNM) for the analysis of arbitrary Kirchhoff plates is presented, which combines the advantageous properties of meshless method, radial point interpolation method (RPIM) and BEM. The solution in present method comprises two parts, i.e., the complementary solution and the particular solution. The complementary solution is solved by hybrid radial boundary node method (HRBNM), in which a three-field interpolation scheme is employed, and the boundary variables are approximated by RPIM, which is applied instead of moving least square (MLS) and obtains the Kronecker’s delta property where the traditional HBNM does not satisfy. The internal variables are interpolated by two groups of symmetric fundamental solutions. Based on those, a hybrid displacement variational principle for Kirchhoff plates is developed, and a meshless method of HRBNM for solving biharmonic problems is obtained, by which the complementary solution can be solved.     

Anomalous diffusion on the percolating networks

According to the standard diffusion equation, by introducing reasonably into a anomalous diffusion coefficient, the generalized diffusion equation, which describes anomalous diffusion on the percolating networks with a power-law distribution of waiting times, is derived in this paper. The solution of the generalized diffusion equation is obtained by using the method, which is used by Barta. The problems of anomalous diffusion on percolating networks with a power-law distribution of waiting times, which aren't solved by Barta, are resolved.     

A Two-dimensional Contact Problem with Given Region of Adhesion

The two-dimensional indentation of an elastic half-plane bya rigid punch under normal and tangential load is considered.The contact area is divided into an inner region with adhesion,the dimension of which is known beforehand, surrounded by tworegions in which inward slip takes place. The problem is formulatedin terms of a coupled pair of Cauchy type integrals for thenormal and shear stresses at the surface of the half-plane.In the case of friction-free slip these integrals are combinedto an inhomogeneous Fredholm equation which is solved by a methodof successive approximations. In the case when the inward slipis governed by Coulomb friction, the problem is solved by anumerical method.