一类复合材料焊接的界面裂纹问题

利用复变方法和解析函数边值问题的基本理论，研究一类复合材料焊接线上出现裂纹的平面弹性基本问题，笔者通过适当的函数分解和积分变换，将寻找复应力函数的问题转化为求解一正而型奇异积分方程，并借助积分方程理论给出了方程的求解方法。     

具水平直裂纹的弹性半平面运动载荷问题

利用平面弹性复变方法和积分方程理论，讨论具水平直裂纹的弹性半平面运动载荷问题，最后，得出应力函数封闭形式的解。     

椭圆孔边裂纹对SH波的散射及其动应力强度因子

采用复变函数和Green函数方法求解具有任意有限长度的椭圆孔边上的径向裂纹对SH波的散射和裂纹尖端处的动应力强度因子．取含有半椭圆缺口的弹性半空间水平表面上任意一点承受时间谐和的出平面线源荷载作用时的位移解作为Green函数,采用裂纹“切割”方法,并根据连续条件建立起问题的定解积分方程,得到动应力强度因子的封闭解答．讨论了孔洞的存在对动应力强度因子的影响．     

带裂纹的弹性狭长体基本问题

利用复变方法和积分方程理论，讨论带任意裂纹的各向同性弹性狭长体的基本问题。通过适当的函数分解和积分变换，将问题简化为一正则型奇异积分方程。对方程解的情况和求解方法进行了研究，并导出裂纹尖端的应力强度因子。     

三种不同材料拚接平面的周期裂纹问题

本文讨论了三种不同材料拚接平面的周期裂纹问题,把问题化为解析函数的某种边值问题,并进一步化为某正则型的奇异积分方程。再采用分拆函数的方法,给出了周期直裂纹情况的封闭形式解。且导出了应力强度因子的计算公式。     

两非均匀半平面粘结的非均匀平面的裂纹问题*

本文对两个非均匀半平面粘结的非均匀平面的裂纹问题作了分析,文中假定两种材料的泊松比v相同,但杨氏模量随坐标x按不同形式的指数函数变化.本文使用非均匀平面问题的单裂纹解及富氏变换方法, 使问题归为一个柯西型奇异积分方程,最后对应力强度因子的计算给出了若干数值例子.     

边裂纹柱扭转的强奇性积分方程解法*

本文利用单裂纹扭转的位错型解答,使用有限部积分的概念和方法,最后将含有单根水平裂纹的柱体扭转问题归为解一个强奇性积分方程,并为其建立了数值求解方法,文末作了若干数值例子的计算,结果令人满意.     

非对称载荷作用的外部圆形裂纹问题

使用边界积分方程方法,研究了三维无限弹性体中受非对称载荷作用的外部圆形裂纹问题。通过使用Fourier级数和超几何函数,将问题的二维边界奇异积分方程简化为Abel型方程,获得了一般非对称载荷作用的外部圆形裂纹问题的应力强度因子精确解,比用Hankel变换法得到的结果更为一般。结果表明:边界积分方程法在解析分析方面还有很大的潜力。     

带裂纹圆柱体扭转的强奇性积分方程解法

本以裂纹的翘曲位移间断为基本未知函数，把带裂纹圆柱体的扭转问题化为求解一组强奇性积分方程，并利用数值法，对星形及其不同形状裂纹圆柱体的抗扭刚度和应力强度因子作了数值计算，计算结果令人满意。     

压电压磁复合材料中一对平行裂纹对弹性波的散射

利用Schmidt方法对压电压磁复合材料中一对平行对称裂纹对反平面简谐波的散射问题进行了分析,借助富里叶变换得到了以裂纹面上的间断位移为未知变量的对偶积分方程．在求解对偶积分方程的过程中,裂纹面上的间断位移被展开成雅可比多项式的形式,最终获得了应力强度因子、电位移强度因子、磁通量强度因子三者之间的关系．结果表明,压电压磁复合材料中平行裂纹动态反平面断裂问题的应力奇异性与一般弹性材料中的动态反平面断裂问题的应力奇异性相同,同时讨论了裂纹间的屏蔽效应．     

A CRACK PROBLEM WITH A BROKEN LINE INTERFACE

§０．ＩｎｔｒｏｄｕｃｔｉｏｎＣｏｎｓｉｄｅｒａｂｌｅｐｌａｎｅｃｒａｃｋｐｒｏｂｌｅｍｓｏｆｃｏｍｐｏｓｉｔｅｍｅｄｉａｆｏｒｔｈｅｃａｓｅｉｎｗｈｉｃｈｔｈｅｉｎｔｅｒｆａｃｅｉｓａｎｉｎｆｉｎｉｔｅｓｔｒａｉｇｈｔｌｉｎｅｗｅｒｅｓｔｕｄｉｅｄ...     

Boundary integral method for scattering problems with cracks buried in a piecewise homogeneous medium

We consider the scattering of time‐harmonic acoustic plane waves by a crack buried in a piecewise homogeneous medium. The integral representation for a solution is obtained in the form of potentials by using Green's formula. The density in potentials satisfies the uniquely solvable Fredholm integral equation. Then we obtain the existence and uniqueness of the solution. Copyright © 2011 John Wiley & Sons, Ltd.     

Numerical solution of a singular integral equation arising in a cruciform crack problem

A singular integral equation arising in a cruciform crack problem is investigated in the present paper. Based on the convex technique, the piecewise Taylor-series expansion method is extended by introducing a weight parameter. An approximate solution of the singular integral equation is constructed and its convergence and error estimate are made. The variations of the approximate solutions associating with stress intensity factors are analyzed by considering internal pressures of power and sine functions, respectively. By comparing with the known methods, the observations reveal that a good approximation can be achieved using less derivative times, less discretization points, and a suitable weight parameter. The obtained results show that the crack growth is dependent on applied mechanical loadings.     

均匀手性介质中理想导体光栅的电磁散射

§1Introduction Phenomenaofopticalactivityinspecialmaterialshavebeenknownsincethe beginningoflastcentury.Thoughopticalactivityhasbeenconsideredinopticsandin quantummechanicsformanyyears,itsanalysiswithintheframeworkofclassical electromagneticfieldtheoryarosemuchlater.Recently,therehasbeenaconsiderable interestinthestudyofscatteringanddiffractionbychiralmedium.Ingeneral,the electromagneticfieldsinsidethechiralmediumaregovernedbyMaxwellequations togetherwithDrude-Born-Fedorovequationsinwhichth…     

半无穷大裂纹端部粘聚力分析

准脆性材料裂纹端部断裂过程区粘聚力是导致非线性断裂特性的重要原因,根据准脆性材料的断裂特性,对存在粘聚力分布的半无穷大裂纹力学分析模型,由变形叠加原理得到以该粘聚应力分布为未知函数的积分方程,通过对积分方程的分析推证,得到了该分布函数解的数学结构和级数型表达式;提出了由实际裂纹张开位移,确定裂纹端部粘聚力分布函数的两种方法:其一由连续的裂纹张开位移通过积分变换求解未知函数级数展开项的系数,其二是由离散的裂纹张开位移数据通过最小二乘法确定该函数;推导出了相应方法求解未知量的代数方程,并且给出了适当的算例和讨论。     

The method of integral equation for scattering problem with a mixed crack

We consider the scattering of an electromagnetic time‐harmonic plane wave by an infinite cylinder having a mixed open crack (or arc) in R² as the cross section. The crack is made up of two parts, and one of the two parts is (possibly) coated by a material with surface impedance λ. We transform the scattering problem into a system of boundary integral equations by adopting a potential approach, and establish the existence and uniqueness of a weak solution to the system by the Fredholm theory. Copyright © 2011 John Wiley & Sons, Ltd.     

不同材料的两个各向同性弹性长条的焊接问题

利用复变方法和积分方程理论 ,讨论两个不同材料的各向同性弱性长条的焊接问题 ,在理论上 ,给出了弱性体应力分布封闭形式的解 .     

Approximate solution of the problem of scattering of surface water waves by a partially immersed rigid plane vertical barrier

The problem of scattering of two dimensional surface water waves by a partially immersed rigid plane vertical barrier in deep water is re-examined. The associated mixed boundary value problem is shown to give rise to an integral equation of the first kind. Two direct approximate methods of solution are developed and utilized to determine approximate solutions of the integral equation involved. The all important physical quantity, called the Reflection Coefficient, is evaluated numerically, by the use of the approximate solution of the integral equation. The numerical results, obtained in the present work, are found to be in an excellent agreement with the known results, obtained earlier by Ursell (1947), by the use of the closed form analytical solution of the integral equation, giving rise to rather complicated expressions involving Bessel functions.