Inertia effects in circular squeeze film bearing using Herschel–Bulkley lubricants

Recent engineering trends in lubrication emphasize that in order to analyze the performance of bearings adequately, it is necessary to take into account the combined effects of fluid inertia forces and non-Newtonian characteristics of lubricants. In the present work, the effects of fluid inertia forces in the circular squeeze film bearing lubricated with Herschel–Bulkley fluids with constant squeeze motion have been investigated. Herschel–Bulkley fluids are characterized by an yield value which leads to the formation of a rigid core in the flow region. The shape and extent of the core formation along the radial direction is determined numerically for various values of Herschel–Bulkley number and power-law index. The bearing performances such as pressure distribution and load capacity for different values of Herschel–Bulkley number, Reynolds number, power-law index have been computed. The effects of fluid inertia and non-Newtonian characteristics on the bearing performances have been discussed.     

A nonlinear stability analysis of a rotating double-diffusive magnetized ferrofluid

A nonlinear stability result for a double-diffusive magnetized ferrofluid layer rotating about a vertical axis for stress-free boundaries is derived via generalized energy method. The mathematical emphasis is on how to control the nonlinear terms caused by magnetic body and inertia forces. The result is compared with the result obtained by linear instability theory. The critical magnetic thermal Rayleigh number given by energy theory is slightly less than those given by linear theory and thus indicates the existence of subcritical instability for ferrofluids. For non-ferrofluids, it is observed that the nonlinear critical stability thermal Rayleigh number coincides with that of linear critical stability thermal Rayleigh number. For lower values of magnetic parameters, this coincidence is immediately lost. The effect of magnetic parameter, M₃, solute gradient, S₁, and Taylor number, T_A1, on subcritical instability region have been analyzed. We also demonstrate coupling between the buoyancy and magnetic forces in the nonlinear stability analysis.     

Inverse heat conduction problem in a thin circular plate and its thermal deflection

An inverse problem of transient heat conduction in a thin finite circular plate with the given temperature distribution on the interior surface of a thin circular plate being a function of both time and position has been solved with the help of integral transform technique and also determine the thermal deflection on the outer curved surface of a thin circular plate defined as 0 ? r ? a, 0 ? z ? h. The results, obtained in the series form in terms of Bessel’s functions, are illustrated numerically.     

Combined effect of magnetic field and heat absorption on unsteady free convection and heat transfer flow in a micropolar fluid past a semi-infinite moving plate with viscous dissipation using element free Galerkin method

The fully developed electrically conducting micropolar fluid flow and heat transfer along a semi-infinite vertical porous moving plate is studied including the effect of viscous heating and in the presence of a magnetic field applied transversely to the direction of the flow. The Darcy-Brinkman-Forchheimer model which includes the effects of boundary and inertia forces is employed. The differential equations governing the problem have been transformed by a similarity transformation into a system of non-dimensional differential equations which are solved numerically by element free Galerkin method. Profiles for velocity, microrotation and temperature are presented for a wide range of plate velocity, viscosity ratio, Darcy number, Forchhimer number, magnetic field parameter, heat absorption parameter and the micropolar parameter. The skin friction and Nusselt numbers at the plates are also shown graphically. The present problem has significant applications in chemical engineering, materials processing, solar porous wafer absorber systems and metallurgy.     

Simplification through regression analysis on the dynamic response of plates with arbitrary boundary conditions excited by moving inertia load

Dynamic response of a thin rectangular plate traversed by a moving inertia load with arbitrary boundary condition is investigated through this paper. The inertia effect of mass is considered and relevant formulation is established based on the full-term of acceleration, employing the method of Boundary Characteristic Orthogonal Polynomials, BCOP. To acquire the complete solution of partial differential equations governing on the plate, the Galerkin method is used to separate the temporal function from the spatial one. The problem is formulated in the state space and applying the numerical method of Matrix Exponential the complete solution would be achieved. In the numerical studies, a comprehensive parametric study is performed for both cases of loading when inertia effect is included or neglected. Several mass and aspect ratios for the plate with major types of boundary conditions CCCC, SSSS, CFCF and SFSF are accounted for presenting the results. Dynamic amplification factor against velocity parameter is scrutinized within many graphs alongside with a time history analysis of dynamic deflection for the plate's mid-span. Investigating on the dynamic response concludes to the critical boundary condition upon moving mass. By introducing a conversion factor, the margin of inertia and the critical velocity where happened would be achieved, then through a regression analysis a curve fitting model of polynomials is proposed. Corresponding coefficients testify the goodness of fit for such regression which are reported within tables. Referring to this simplified model of conversion factor pertaining to the specific boundary condition, it would be possible to handle the problem in moving load case without undertaking the complexities arisen from inertia contribution into the formulation. Having derived the factor from simplified model which has been calculated for a specific mass and velocity ratio, then multiplying into the moving load response, the complete solution for moving mass would be achieved.     

Optimal paths for minimizing entransy dissipation during heat transfer processes with generalized radiative heat transfer law

A common of finite-time heat transfer processes between high- and low-temperature sides with generalized radiative heat transfer law [q ∝ Δ(Tⁿ)] is studied in this paper. In general, the minimization of entropy generation in heat transfer processes is taken as the optimization objective. A new physical quantity, entransy, has been identified as a basis for optimizing heat transfer processes in terms of the analogy between heat and electrical conduction recently. Heat transfer analyses show that the entransy of an object describes its heat transfer ability, as the electrical energy in a capacitor describes its charge transfer ability. Entransy dissipation occurs during heat transfer processes, as a measure of the heat transfer irreversibility with the dissipation related thermal resistance. Under the condition of fixed heat load, the optimal configurations of hot and cold fluid temperatures for minimizing entransy dissipation are derived by using optimal control theory. The condition corresponding to the minimum entransy dissipation strategy with Newtonian heat transfer law (n = 1) is that corresponding to a constant heat flux rate, while the condition corresponding to the minimum entransy dissipation strategy with the linear phenomenological heat transfer law (n = −1) is that corresponding to a constant ratio of hot to cold fluid temperatures. Numerical examples for special cases with Newtonian, linear phenomenological and radiative heat transfer law (n = 4) are provided, and the obtained results are also compared with the conventional strategies of constant heat flux rate and constant hot fluid (reservoir) temperature operations and optimal strategies for minimizing entropy generation. Moreover, the effects of heat load changes on the optimal hot and fluid temperature configurations are also analyzed.     

Wave propagation and transient response of a functionally graded material plate under a point impact load in thermal environments

In this paper, the wave propagation and transient response of an infinite functionally graded plate under a point impact load in thermal environments are studied. The thermal effects and temperature-dependent material properties are taken into account. The temperature field considered is assumed to be a uniform distribution over the plate surface and varies in the thickness direction only. Material properties are assumed to be temperature-dependent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents. Considering the effects of transverse shear deformation and rotary inertia, the governing equations of the wave propagation in the functionally graded plate are derived from Hamilton’s principle. The analytic dispersion relation of the functionally graded plate is obtained by means of integral transforms and a complete discussion of dispersion for the functionally graded plate is given. Using the dispersion relation and integral transforms, exact integral solutions of the functionally graded plate under a point impact load in thermal environments are obtained. The influences of the volume fraction distributions and temperature field on the wave propagation and transient response of functionally graded plates are discussed in detail. The results carried out can be used in the ultrasonic inspection techniques and provide a theoretical basis for engineering applications.     

Terminal motion of a thin elliptical plate over a horizontal plane with orthotropic friction

The problem on the terminal motion of a thin elliptic plate over a horizontal plane taking into account orthotropic friction forces has been considered. Differential equations of the movement of the plate have been derived. The system of equations has been numerically solved under various initial conditions. It has been shown that sliding and spinning cease simultaneously. It has been found that the limiting behavior of the plate is governed not only by the ratio of the moment of inertia to the coefficient of friction, but also by the orientation of the plate. A comparison of the behaviors of the elliptic and circular plates has been carried out. The results of the calculations can be used to describe the phenomena that occur in a rail–wheel contact in more detail.     

Smooth boundary integration method in a linear two-dimensional problem of incompressible fluid and solid

This paper presents a new application of a theoretical and computational method of smooth boundary integration which belongs to the methods of boundary integral equations. Smooth integration is not a method of approximation. In its final analytical form, a smooth-kernel integral equation is computerized easily and accurately.

Smooth integration is associated with a “pressure-vorticity” formulation which covers linear problems in elasticity and fluid mechanics. The solution presented herein is essentially the same as that reported in an earlier paper for regular elasticity. The constraint of incompressibility does not cause difficulties in the pressure-vorticity formulation.

The linear fluid mechanics problem formulated and solved in this paper covers Stokes' problem of a slow viscous flow, and has a wider interpretation. The translational inertia forces are incorporated in the linear problem, as in Euler's dynamic theory of inviscid flow. The centrifugal inertia forces are left for the non-linear problem. The linear problem is perceived as a step in solution of the non-linear problems.     

Analysis of flow and thermal field in nanofluid using a single phase thermal dispersion model

Flow and thermal field in nanofluid is analyzed using single phase thermal dispersion model proposed by Xuan and Roetzel [Y. Xuan, W. Roetzel, Conceptions for heat transfer correlation of nanofluids, Int. J. Heat Mass Transfer 43 (2000) 3701–3707]. The non-dimensional form of the transport equations involving the thermal dispersion effect is solved numerically using semi-explicit finite volume solver in a collocated grid. Heat transfer augmentation for copper–water nanofluid is estimated in a thermally driven two-dimensional cavity. The thermo-physical properties of nanofluid are calculated involving contributions due to the base fluid and nanoparticles. The flow and heat transfer process in the cavity is analyzed using different thermo-physical models for the nanofluid available in literature. The influence of controlling parameters on convective recirculation and heat transfer augmentation induced in buoyancy driven cavity is estimated in detail. The controlling parameters considered for this study are Grashof number (10³ < Gr < 10⁵), solid volume fraction (0 < ? < 0.2) and empirical shape factor (0.5 < n < 6). Simulations carried out with various thermo-physical models of the nanofluid show significant influence on thermal boundary layer thickness when the model incorporates the contribution of nanoparticles in the density as well as viscosity of nanofluid. Simulations incorporating the thermal dispersion model show increment in local thermal conductivity at locations with maximum velocity. The suspended particles increase the surface area and the heat transfer capacity of the fluid. As solid volume fraction increases, the effect is more pronounced. The average Nusselt number from the hot wall increases with the solid volume fraction. The boundary surface of nanoparticles and their chaotic movement greatly enhances the fluid heat conduction contribution. Considerable improvement in thermal conductivity is observed as a result of increase in the shape factor.     

Optimum design of one-dimensional journal bearings

When two surfaces in relative motion are separated by a thin layer of viscous fluid, they are kept apart by the pressure generated in the fluid film due to viscous forces. The magnitude of the resultant of this pressure is the load capacity of the bearing. We find the shape of a one-dimensional journal bearing which supports the greatest load.     

Stabilization of periodic Stokesian Hele–Shaw flows of ferrofluids

We consider an incompressible ferrofluid in a vertical Hele–Shaw cell and develop a proper analytic framework for the free interface and the velocity potential of the fluid in a periodic geometry. The flow is assumed to obey a non-Newtonian Darcy law. The forces influencing the fluid are gravity, surface tension and the response to a magnetic field induced by a current. In addition, the flow is stabilized at the lower boundary component by an external source b. We prove a well-posedness result for the flow near flat solutions. Moreover, we find conditions on the parameters and on the slope of b for the exponential stability and instability of flat interfaces. Furthermore, we identify values for the current's intensity ι where critical bifurcation of nontrivial finger-shaped solutions from the branch of trivial (flat) solutions takes place.     

Falkner-Skan boundary layer flow of a power-law fluid past a stretching wedge

The steady two-dimensional laminar boundary layer flow of a power-law fluid past a permeable stretching wedge beneath a variable free stream is studied in this paper. Using appropriate similarity variables, the governing equations are reduced to a single third order highly nonlinear ordinary differential equation in the dimensionless stream function, which is solved numerically using the Runge-Kutta scheme coupled with a conventional shooting procedure. The flow is governed by the wedge velocity parameter λ, the transpiration parameter f₀, the fluid power-law index n, and the computed wall shear stress is f″(0). It is found that dual solutions exist for each value of f₀, m and n considered in λ − f″(0) parameter space. A stability analysis for this self-similar flow reveals that for each value of f₀, m and n, lower solution branches are unstable while upper solution branches are stable. Very good agreements are found between the results of the present paper and that of Weidman et al. [28] for n = 1 (Newtonian fluid) and m = 0 (Blasius problem [31]).     

Mixed finite element models for free vibrations of thin-walled beams

Simple mixed finite element models are developed for the free vibration analysis of curved thin-walled beams with arbitrary open cross section. The analytical formulation is based on a Vlasov's type thin-walled beam theory which includes the effects of flexural-torsional coupling, and the additional effects of transverse shear deformation and rotary inertia. The fundamental unknowns consist of seven internal forces and seven generalized displacements of the beam. The element characteristic arrays are obtained by using a perturbed Lagrangian-mixed variational principle. Only C⁰ continuity is required for the generalized displacements. The internal forces and the Lagrange multiplier are allowed to be discontinuous at interelement boundaries.

Numerical results are presented to demonstrate the high accuracy and effectiveness of the elements developed. The standard of comparison is taken to be the solutions obtained by using two-dimensional plate/shell models for the beams.     

Numerical study of forced and free convective boundary layer flow of a magnetic fluid over a flat plate under the action of a localized magnetic field

The two-dimensional, steady, laminar, forced and free convective boundary layer flow of a magnetic fluid over a semi-infinite vertical plate, under the action of a localized magnetic field, is numerically studied. The magnetic fluid is considered to be water-based with temperature dependent viscosity and thermal conductivity. The study of the boundary layer is separated into two cases. In case I the boundary layer is studied near the leading edge, where it is dominated by the large viscous forces, whereas in case II the boundary layer is studied far from the leading edge of the plate where the effects of buoyancy forces increase. The numerical solution, for these two different cases, is obtained by an efficient numerical technique based on the common finite difference method. Numerical calculations are carried out for the value of Prandl number Pr =  49.832 (water-based magnetic fluid) and for different values of the dimensionless parameters entering into the problem and especially for the magnetic parameter Mn, the viscosity/temperature parameter Θ _r and the thermal/conductivity parameter S*. The analysis of the obtained results show that the flow field is influenced by the application of the magnetic field as well as by the variation of the viscosity and the thermal conductivity of the fluid with temperature. It is hoped that they could be interesting for engineering applications.     

Magnetic field effects on Newtonian and non-Newtonian ferrofluid flow past a circular cylinder

The changes in the flow properties under the action of electromagnetic body forces are investigated numerically for ferrofluid flow past a circular cylinder. Ferrofluid is modeled as both a Newtonian and a non-Newtonian Power-Law fluid. Magnetic forces are applied by placing magnets at different locations on the surface of the cylinder. The magnetostatic effects on the structure of the wake region, on drag reduction and on vortex formation length and frequency are shown and compared in terms of Reynolds number, interaction parameter, Power-Law index and magnet location. It is shown that the increase in the interaction parameter reduces drag for both Newtonian and non-Newtonian model. This decrease is observed to be higher for shear thinning and lower for shear thickening fluid compared to Newtonian case. It is also shown that vortex street formation in the wake region behind the cylinder may be delayed under high magnetic effects. The Strouhal number is higher for shear thinning case at both low and high Reynolds numbers, and lower for shear thickening case at high Reynolds numbers, compared to Newtonian fluid. The vortex formation frequency also decreases under the action of the magnetic field in all cases, however the vortex formation length increases. Placing the magnet towards the front region of the cylinder increases considerably the drag coefficient for both Newtonian and non-Newtonian model. This increase in drag coefficient is higher in the shear thinning fluid and lower in the shear thickening fluid compared to the Newtonian case.     

以边框加固的承重预制墙

这承重预制墙,由一薄板及沿其周界有一加固用的框架所组成。当荷载作用于框架时,板的边界条件,既不是已知的力也不是已知的位移,在满足板的应力函数的双调和方程的基础上,以总的应变能为最小,来保证这两弹性体的位移协调。于是得到一组无穷联立方程,所得的结果表明这解法是有效的。     

Sound radiation by a plate reinforced by a set of projecting stiffener ribs subjected to a periodic system of forces

There is considered sound radiation by a plate reinforced by a periodic set of projecting stiffener ribs of small wave dimensions. The source of the field is a set of lumped harmonic forces applied to the plate periodically in each transit, where the forces are taken identical in amplitude but with a constant phase shift between adjacent sources. The problem reduces to a quasiregular infinite system of linear algebraic equations, in terms of whose solution the energy fluxes leaving the plate into the fluid are expressed.     

Numerical study of forced and free convective boundary layer flow of a magnetic fluid over a flat plate under the action of a localized magnetic field

The two-dimensional, steady, laminar, forced and free convective boundary layer flow of a magnetic fluid over a semi-infinite vertical plate, under the action of a localized magnetic field, is numerically studied. The magnetic fluid is considered to be water-based with temperature dependent viscosity and thermal conductivity. The study of the boundary layer is separated into two cases. In case I the boundary layer is studied near the leading edge, where it is dominated by the large viscous forces, whereas in case II the boundary layer is studied far from the leading edge of the plate where the effects of buoyancy forces increase. The numerical solution, for these two different cases, is obtained by an efficient numerical technique based on the common finite difference method. Numerical calculations are carried out for the value of Prandl number Pr =  49.832 (water-based magnetic fluid) and for different values of the dimensionless parameters entering into the problem and especially for the magnetic parameter Mn, the viscosity/temperature parameter Θ _r and the thermal/conductivity parameter S*. The analysis of the obtained results show that the flow field is influenced by the application of the magnetic field as well as by the variation of the viscosity and the thermal conductivity of the fluid with temperature. It is hoped that they could be interesting for engineering applications.     

The transmission of a flexural-gravitational wave through several straight obstacles in a floating plate

Periodic wave processes in a thin elastic plate floating on the surface of an incompressible fluid of finite depth are studied. The plate completely covers the fluid surface and executes flexural oscillations under the action of gravitational waves in the fluid. The system of free oscillations in the plate is disrupted along a set of parallel lines. Rigid clamping of the plate, a sliding fastening and an infinitesimally narrow slit are considered as such disruptions. The apparatus used to construct the solution is quite general, and other disruptions in the elastic properties of a plate or its reinforcement, that are realized with linear boundary-contact conditions, can be treated in a similar way. The transmission and reflection of a harmonic flexural-gravitational wave, that is orthogonally incident on the inhomogeneities in the plate, are studied. Exact analytical representations of the wave fields in the plate and in fluid are obtained and the transmission and reflection coefficients for the incident flexural-gravitational wave are determined. The forces developed in the fastenings are found.