点群6一维六方准晶椭圆孔口与半无限裂纹反平面弹性问题的解析解

导出了点群6-维六方准晶反平面弹性问题的控制方程.利用复变方法,给出了点群6-维六方准晶在周期平面内的反平面弹性问题的应力分量以及边界条件的复变表示,通过引入适当的保角变换,研究了点群6-维六方准晶中带有椭圆孔口与半无限裂纹的反平面弹性问题,得到了椭圆孔口问题应力场的解析解,给出了半无限裂纹问题在裂纹尖端处的应力强度因子的解析解.在极限情形下,椭圆孔口转化为Griffith裂纹,并得到该裂纹在裂尖处的应力强度因子的解析解.当点群6-维六方准晶体的对称性增加时,其椭圆孔口与半无限裂纹的反平面弹性问题的解退化为点群6mm-维六方准晶带有椭圆孔口与半无限裂纹的反平面弹性问题的解。     

椭圆孔边裂纹对SH波的散射及其动应力强度因子

采用复变函数和Green函数方法求解具有任意有限长度的椭圆孔边上的径向裂纹对SH波的散射和裂纹尖端处的动应力强度因子．取含有半椭圆缺口的弹性半空间水平表面上任意一点承受时间谐和的出平面线源荷载作用时的位移解作为Green函数,采用裂纹“切割”方法,并根据连续条件建立起问题的定解积分方程,得到动应力强度因子的封闭解答．讨论了孔洞的存在对动应力强度因子的影响．     

一维六方压电准晶中正六边形孔边裂纹的反平面问题

研究了一维六方压电准晶中正六边形孔边裂纹的反平面问题,利用复变函数中的Cauchy积分公式,通过构造保角映射函数,在电非渗透型的边界条件下得到了孔边裂纹尖端的应力分布以及场强度因子的解析解.通过数值算例,讨论了正六边形的边长和裂纹长度以及剪应力对场强度因子的影响.     

一维六方准晶中带双裂纹的椭圆孔口问题的解析解

利用复变函数方法,通过构造保角映射,研究了一维六方准晶中带双裂纹的椭圆孔口的反平面剪切问题,给出了Ⅲ型裂纹问题的应力强度因子,在极限情形下,不仅可以还原为已有的结果,而且求得一维六方准晶中带双裂纹的圆形孔口问题、十字裂纹问题在裂纹尖端的应力强度因子．     

Interfacial fracture of layered magnetoelectroelastic materials

A problem for an interface crack located in a layered magnetoelectroelastic material strip of semi-infinite length is solved. A closed-form solution is obtained for anti-plane mechanical and in-plane electric and magnetic fields. Explicit expressions for stresses and electric and magnetic fields, together with their intensity factors and the energy release rate, are obtained. The extreme cases of impermeable and permeable cracks are discussed. Using the basic solution for a single crack, solutions for two collinear interface cracks in an infinitely long layered magnetoelectroelastic medium, an interface crack in an infinitely long layered magnetoelectroelastic medium, and an edge crack at the interface of a semi-infinitely long layered magnetoelectroelastic medium are also obtained. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 44, No. 2, pp. 145–164, March–April, 2008.     

带k条径向边裂纹的圆形孔口问题的应力分析

利用复变函数方法,通过构造保角映射研究了带k条径向边裂纹的圆形孔口的平面弹性问题,给出了裂纹尖端Ⅰ型与Ⅱ型问题应力强度因子的精确分析解.在极限情况下,不仅可以还原出星形裂纹,Griffith裂纹,十字裂纹等经典的裂纹问题的结果,而且当k取任意正整数值时,可以模拟出更多的、复杂的带裂纹的圆形孔口问题.     

On an integral equation of the problem for an elastic strip with a slit

A new singular integral equation is obtained that describes the elastic equilibrium of a strip with both an inner and an edge slit (crack) and has a considerable advantage over existing equations /1–9/, etc.) from the viewpoint of a numerical realization and clarification of the analytical relationship with an analogous equation for a half-plane. Numerical results are given of a computation of the stress intensity coefficients at the tips of the inner and edge cracks that refine data in the literature.     

任意形状孔口单边裂纹问题的边界配位解法

本文提出了一组复应力函数,采用边界配位方法对不同形状孔口(包括圆、椭圆、矩形及菱形孔口)的单边裂纹平板的应力强度因子进行了计算.计算结果表明,对长度和宽度远大于孔口和裂纹几何尺寸的试件,配位法与用其他方法所得的无限大板含圆或椭圆孔边裂纹问题的解符合得很好.同时,对其他孔口问题,特别是有限大板情形,本文给出了一系列计算结果.本文所提出的函数及计算过程可以应用于任意形状孔口单边裂纹平板的计算.     

On a finite crack partially penetrating two circular inhomogeneities and some related problems

We investigate a Mode-III finite slit crack partially penetrating two circular inhomogeneities embedded in an unbounded matrix. In order to obtain analytical solutions, it is assumed that the two circular inhomogeneity-matrix interfaces are Apollonius circles with respect to the two crack tips (or equivalently the two crack tips are just mutually image points with respect to each one of the two circular interfaces). Particularly closed-form expressions of the stress intensity factors at the two crack tips are obtained even though only series form solutions to the original boundary value problem can be derived. The loadings considered in this research include: (i) remote uniform anti-plane shearing; (ii) a straight screw dislocation at any position of the three-phase composite system; (iii) a Zener-Stroh crack. The results are verified by comparison with existing solutions. The related problem of a circular hole partially merged in two circular inhomogeneities is also addressed, with closed-form expressions of the stress concentration factors derived.     

具有四条裂纹的圆形孔口问题的应力分析

利用复变函数的方法,通过构造保角映射研究了具有四条裂纹(一对非对称共线裂纹和一对对称共线裂纹)的圆形孔口的平面弹性问题,给出了裂纹尖端应力强度因子的解析解.并由此模拟出了具有三条裂纹、对称四条裂纹、非对称共线双裂纹、对称共线双裂纹的圆形孔口,以及非对称十字裂纹,十字裂纹,T形裂纹问题.     

一维六方准晶双材料中圆孔边共线界面裂纹的反平面问题

研究了一维六方准晶双材料中圆孔边不对称共线界面裂纹的反平面问题。利用Stroh公式和复变函数方法得到了声子场和相位子场耦合作用下的复势函数,给出了裂纹尖端应力强度因子和能量释放率的解析表达式。通过数值算例,讨论了圆孔半径和裂纹长度对应力强度因子的影响,以及耦合系数、声子场应力和相位子场应力对能量释放率的影响。结果表明:当圆孔半径不变时,应力强度因子随右裂纹长度的增大趋向稳定值。当相位子场应力取一定值时,能量释放率达到最小值,说明特定的相位子场应力可以抑制裂纹的扩展。     

圆形孔口裂纹的反平面剪切问题的解析解

利用复变函数方法,通过构造保角映射,研究了带裂纹的圆形孔口的反平面剪切问题,给出了Ⅲ型裂纹问题的应力强度因子.在极限情形下,求得Griffith裂纹在裂纹尖端处应力强度因子,这与已有的结果完全一致.最后数值算例给出了半经和裂纹长度对应力强度因子的影响.     

Anti-plane stress analysis of dissimilar sectors with multiple defects

In this article, the anti-plane deformation of a typical dissimilar sector consists of two sub-sectors attached to each other on one circular edge is studied. The solution of a Volterra type screw dislocation problem in the sector is obtained through finite Fourier cosine transform. Exact closed-form solutions for the displacement and stress fields are also presented. Next, using a distributed dislocation method, integral equations of the sectors weakened by cracks and cavities under an anti-plane traction are obtained. The defects are assumed to be located only in one of the sub-sector regions. The obtained equations for the latter problem are of the Cauchy singular type and have been solved numerically. Several examples are presented to demonstrate the efficiency and applicability of the proposed solution procedure. The geometric and force singularities of the stress field are studied and compared to those reported in the literature.     

The contact problem of elasticity theory for bodies with cracks

The plane contact problem of a stamp impressed into an elastic half-plane containing arbitrarily arranged rectilinear subsurface cracks is formulated and investigated by asymptotic methods. Partial or total overlapping of the crack edges is assumed. The problem reduces to a system of linear singular integrodifferential equations with side conditions in the form of equalities and inequalities. An analytic solution of the problem is obtained in the form of asymptotic power series /1/ in the relative dimension of the greatest crack. Dependences of the first terms of the asymptotic expansions of the desired functions on the mutual location of the cracks and the contact domains, the pressure and friction stress distributions, and the crack size and orientation are determined. Numerical results are presented.

Analysis of the influence of the stress-free boundary of the half-plane on the state of stress and strain of the elastic material near the cracks is presented in /2, 3/. The problem of a crack in an elastic plane whose edges overlap partially is also examined in /3/ by numerical methods.     

考虑表面效应时孔边均布径向多裂纹Ⅲ型断裂力学分析

理论研究了纳米尺度孔边均布径向多裂纹的Ⅲ型断裂性能.基于Gurtin-Murdoch表面弹性理论和保角映射技术,获得了孔和裂纹应力场的解析解,给出了裂纹尖端应力强度因子的闭合解.基于解答分析了应力强度因子的尺寸效应,讨论了裂纹数量、裂纹/孔径比和缺陷表面性能对应力强度因子的影响.结果表明:当孔和裂纹尺寸在纳米量级时,无量纲应力强度因子具有显著的尺寸效应;应力强度因子随裂纹数量的变化规律受裂纹/孔径比的影响;裂纹/孔径比对应力强度因子的影响受到缺陷表面性能的制约,同时表面性能对应力强度因子的影响也受限于裂纹/孔径比;表面效应对应力强度因子的影响与裂纹数量无关.     

一维正方准晶垂直于准周期方向具有不对称共线裂纹的圆形孔口问题

利用复变函数方法,通过构造广义保角映射,研究了一维正方准晶垂直于准周期方向具有不对称共线裂纹的圆形孔口问题,给出了各应力分量在象平面的复表示,并得到该裂纹尖端的应力强度因子.在极限情形下,给出一维正方准晶中具有对称共线裂纹的圆形孔口,带单裂纹的圆形孔口和Griffith裂纹在裂纹尖端的应力强度因子.     

An exact analysis for mode III cracks between two dissimilar magnetoelectroelastic layers

This paper develops a closed-form solution for an interface crack in a layered magnetoelectroelastic strip of finite width. The strip is subjected to anti-plane mechanical and in-plane electric and magnetic fields. Explicit expressions for the stress, electric, and magnetic fields, together with their intensity factors, are obtained for two extreme cases of an impermeable and a permeable cracks. The stress intensity factor does not depend on the electromagnetic boundary conditions assumed for the crack. However, the electrically and magnetically permeable boundary conditions on the crack profile have a significant influence on the crack-tip electromagnetic field intensity factors. Solutions for some special cases, such as a central crack, an edge crack, two symmetric collinear cracks, and a row of collinear interface cracks, are also obtained in closed forms. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 44, No. 6, pp. 763–784, November–December, 2008.     

含椭圆孔或裂纹压电介质平面问题的基本解

应用复变函数的方法，并基于精确的电边界条件，导出了含一椭圆孔或裂纹的横观各向同性压电体在任意集中力和集中电荷作用下的复变函数解，即Ｃｒｅｎ函数解·叠加该解，得到了裂纹表面作用任意集中载荷或分布载荷时的一般解·这些解不但澄清了从前文献中一些不合理的结果，同时也为应用边界元法求解更复杂的压电介质断裂力学问题提供了基本解·     

Torsion of multiconnected bodies with cracks

A general expression is obtained for a multiconnected anisotropic (isotropic) body with rectilinear cracks, for the complex torsion potential that exactly satisfies conditions on the cracks and contains unknown functions determined from the boundary conditions on closed contours. A solution is given for the torsion problem of an elliptical rod with a crack. Results are presented of investigation on the clarification of the influence of geometric and elastic characteristics of the rod on the magnitude of the stress intensity coefficient near an outer edge.Translated from Teoreticheskaya i Prikladnaya Mekhanika, No. 18, pp. 34–38, 1987.     

Problems of a cut in a three-dimensional elastic wedge

The Ritz variational method is applied to problems of a crack (a cut) in the middle half-plane of a three-dimensional elastic wedge. The faces of the elastic wedge are either stress-free (Problem A) or are under conditions of sliding or rigid clamping (Problems B and C respectively). The crack is open and is under a specified normal load. Each of the problems reduces to an operator integrodifferential equation in relation to the jump in normal displacement in the crack area. The method selected makes it possible to calculate the stress intensity factor at a relatively small distance from the edge of the wedge to the cut area. Numerical and asymptotic solutions [Pozharskii DA. An elliptical crack in an elastic three-dimensional wedge. Izv. Ross Akad. Nauk. MTT 1993;(6):105–12] for an elliptical crack are compared. In the second part of the paper the case of a cut reaching the edge of the wedge at one point is considered. This models a V-shaped crack whose apex has reached the edge of the wedge, giving a new singular point in the solution of boundary-value problems for equations of elastic equilibrium. The asymptotic form of the normal displacements and stress in the vicinity of the crack tip is investigated. Here, the method employed in [Babeshko VA, Glushkov YeV, Zinchenko ZhF. The dynamics of Inhomogeneous Linearly Elastic Media. Moscow: Nauka; 1989] and [Glushkov YeV, Glushkova NV. Singularities of the elastic stress field in the vicinity of the tip of a V-shaped three-dimensional crack. Izv. Ross Akad. Nauk. MTT 1992;(4):82–6] to find the operator spectrum is refined. The new basis function system selected enables the elements of an infinite-dimensional matrix to be expressed as converging series. The asymptotic form of the normal stress outside a V-shaped cut, which is identical with the asymptotic form of the contact pressure in the contact problem for an elastic wedge of half the aperture angle, is determined, when the contact area supplements the cut area up to the face of the wedge.