锂金属电池用高浓度电解液体系研究进展

锂金属二次电池具有极高的能量密度,是下一代储能电池的研究热点。然而,金属锂负极在传统碳酸酯电解液1 mol·L^?1 LiPF6-EC/DEC(ethylene carbonate/diethyl carbonate)中充放电时,存在严重的枝晶生长和循环效率低下等问题,阻碍了其商业化应用。因此,开发与锂负极兼容的新型电解液体系是目前重要的研究任务。与传统稀溶液相比,高浓度电解液体系具有独有的物化性质和优异的界面相容性,并且能有效抑制锂枝晶生长、显著提升锂负极的循环可逆性,因而格外受到关注。本文综述了高浓度电解液及局部高浓电解液体系的最新研究进展,分析了其溶液化学结构和物化性质,对其与锂负极的界面相容性、枝晶抑制效果、效率提升能力及界面稳定性机制进行了探讨;文章着重介绍了高浓与局部高浓电解液体系在锂金属二次电池中的应用,同时从基础科学研究和应用研究两个层面对高浓电解液和局部高浓电解液存在的主要问题进行了简要分析,并对其未来发展方向进行了展望。     

锂金属电池中的复合负极

锂金属具有理论比容量高、电位低等优点,被认为是电极中的“圣杯”。然而,锂金属负极在循环过程当中存在着不可控的枝晶生长、体积膨胀等问题,严重地阻碍了锂金属电池的商业化进程。本综述首先概述了锂枝晶的形成机理,然后对由小及大,自内而外,总结了近年来三种不同层次的锂金属电池复合负极:锂金属负极内部结构的复合、锂金属电池内部结构的复合以及锂金属电池内部环境与外界操作条件的复合。最后,本综述对未来多层次锂金属电池复合负极的前景做出了展望。     

锂硫银锗矿固态电解质研究进展

全固态电池因其较高的安全性和能量密度而成为下一代电动汽车和智能电网用储能器件的重点研究方向之一。开发具有高室温锂离子电导率、化学/电化学稳定性优异、对电极材料兼容性优异等特点的固态电解质材料是推动全固态电池发展的重要研究课题之一。硫化物电解质因其相对较高的室温电导率(~10⁻³ S∙cm⁻¹)、较低的电解质/电极固-固界面阻抗等优点而在众多无机固体电解质材料中成为研究热点。本文基于作者多年研究成果和当前国内外发表的相关工作,从电解质的结构、离子传导、合成、综合性能改善及在全固态电池中的应用等方面系统总结了锂硫银锗矿固态电解质材料研究,并分析了该类电解质面临的问题和挑战,最后探讨了其未来可能的研究方向和发展趋势。     

Recent Progress in High-Performance Lithium Sulfur Batteries: The Emerging Strategies for Advanced Separators/Electrolytes Based on Nanomaterials and Corresponding Interfaces

Lithium-sulfur (Li−S) batteries, possessing excellent theoretical capacities, low cost and nontoxicity, are one of the most promising energy storage battery systems. However, poor conductivity of elemental S and the “shuttle effect” of lithium polysulfides hinder the commercialization of Li−S batteries. These problems are closely related to the interface problems between the cathodes, separators/electrolytes and anodes. The review focuses on interface issues for advanced separators/electrolytes based on nanomaterials in Li−S batteries. In the liquid electrolyte systems, electrolytes/separators and electrodes system can be decorated by nano materials coating for separators and electrospinning nanofiber separators. And, interface of anodes and electrolytes/separators can be modified by nano surface coating, nano composite metal lithium and lithium nano alloy, while the interface between cathodes and electrolytes/separators is designed by nano metal sulfide, nanocarbon-based and other nano materials. In all solid-state electrolyte systems, the focus is to increase the ionic conductivity of the solid electrolytes and reduce the resistance in the cathode/polymer electrolyte and Li/electrolyte interfaces through using nanomaterials. The basic mechanism of these interface problems and the corresponding electrochemical performance are discussed. Based on the most critical factors of the interfaces, we provide some insights on nanomaterials in high-performance liquid or state Li−S batteries in the future.     

金属有机骨架材料在金属锂电池界面的应用

金属锂电池是下一代高能量密度电池体系的代表。然而,高比能金属锂电池的发展受到界面诸多问题的限制,如:金属锂负极枝晶生长、隔膜界面兼容性、正极界面不稳定等,影响了金属锂电池的界面传质传荷过程,并导致金属锂界面环境恶化、电池的容量衰减、安全性能下降等问题。金属有机骨架(MOF)是一种具有稳定多孔结构的有机无机杂化材料,近年来在高比能金属锂电池领域受到广泛关注。其多孔结构与开放的金属位点(OMs)提供了优异的离子电导率,稳定的空间结构提供了较高的机械强度,多样的官能团与金属节点带来丰富的功能性。本文分析了金属锂电池界面的主要挑战,结合金属锂界面的成核模型,总结了MOF及其衍生材料在解决锂金属负极界面、隔膜界面、以及正负极界面稳定性相互作用等方面的研究进展和作用机理,为解决高比能金属锂电池界面失稳问题提供了解决途径,并展望了MOF基材料的设计与发展方向。     

The development of lithium ion secondary batteries

Lithium ion secondary batteries (LIBs) were successfully developed as battery systems with high volumetric and gravimetric energy densities, which were inherited from lithium secondary batteries (LSBs) with metallic lithium anodes. LSBs have several drawbacks, however, including poor cyclability and quick-charge rejection. The cell reaction in LIB is merely a topochemical one, namely the migration of lithium ions between positive and negative electroces. No chemical changes were observed in the two electrodes or in the electrolytes. This results in little chemical transformation of the active electrode materials and electrolytes, and thus, LIBs can overcome the weaknesses of LSBs; for example, LIBs show excellent cyclability and quick-charge acceptance. Many difficulties, however, were encountered during the course of development, including capacity fade during cycling and safety issues. This article is the story of the development of LIBs and it describes how the difficulties were surmounted.     

Nonflammable nonaqueous electrolytes for lithium batteries

As the energy density of state-of-the-art lithium (Li)-ion batteries (LIBs) increases, the safety concern of LIBs using liquid electrolytes is drawing increasing attention. Flammability of electrolytes is a critical link of the overall safety performance of LIBs and Li metal batteries. For this reason, intensive efforts have been devoted to suppressing the flammability of liquid electrolytes. In this short review, the common approaches to reduce the flammability of the nonaqueous liquid electrolytes will be summarized. The advantages and limitations of these approaches will also be discussed.     

Locally Concentrated Ionic Liquid Electrolytes for Lithium-Metal Batteries

Non-flammable ionic liquid electrolytes (ILEs) are well-known candidates for safer and long-lifespan lithium metal batteries (LMBs). However, the high viscosity and insufficient Li⁺ transport limit their practical application. Recently, non-solvating and low-viscosity co-solvents diluting ILEs without affecting the local Li⁺ solvation structure are employed to solve these problems. The diluted electrolytes, i.e., locally concentrated ionic liquid electrolytes (LCILEs), exhibiting lower viscosity, faster Li⁺ transport, and enhanced compatibility toward lithium metal anodes, are feasible options for the next-generation high-energy-density LMBs. Herein, the progress of the recently developed LCILEs are summarised, including their physicochemical properties, solution structures, and applications in LMBs with a variety of high-energy cathode materials. Lastly, a perspective on the future research directions of LCILEs to further understanding and achieve improved cell performances is outlined.     

镁离子电池正极材料研究进展

镁离子电池(MIBs)因镁资源储量丰富、体积能量密度大、金属镁空气中相对稳定等优势,被认为是具有大规模储能应用潜力的电池体系。然而,镁离子较高的电荷密度和较强的溶剂化作用导致其在正极材料中的可逆脱嵌和固-液界面上的离子扩散相当缓慢,严重影响了MIBs的电化学性能。近年来,人们针对MIBs正极材料开展了大量工作,取得了一定进展,但是还存在不少问题。本文先从MIBs体系的特点出发,阐述其优势和目前所面临的主要挑战,然后从无机正极材料和有机正极材料两方面展开,梳理并总结了各类正极材料的局限性及其解决策略,对优化方法和材料性能间的相关性进行归纳和讨论,为今后进一步发展具有优异电化学性能的MIBs正极材料提供可能的参考。     

锂离子电池高容量合金基含锂负极材料的研究进展

现有的以石墨为负极的锂离子电池能量密度逐渐接近其理论极限. 基于合金化反应机制的高容量含锂负极材料Li_xM_y(M为能够和锂发生合金化反应的元素)是一类新兴的负极材料, 具有数倍于石墨的储锂比容量, 且可以为电池提供活性锂源. 这些特性使其能够与高容量无锂正极材料(如S, O₂, FeF₃和V₂O₅等)相匹配, 构建下一代高比能锂离子电池新体系. 本文综述了近年来高容量合金基含锂负极材料(如Li_xSi, Li_xSn, Li₃P和Li_xAl基系列材料)的研究进展, 分析了所面临的挑战, 概述了材料的合成与电极的制备方法, 并介绍了它们在常规锂离子电池、 锂离子-硫电池及锂离子-空气电池等多个全电池体系中的应用实例, 提出并举证了其电化学性能优化与调控的策略, 最后展望了未来的研究方向.     

多空间尺度下的金属锂负极表征技术

金属锂因为其优秀的特性被认为是未来锂电池负极的最终之选。然而目前金属锂负极在旧有液态体系中的研究陷入瓶颈,在新兴固态体系中的挑战层出不穷。想要实现金属锂负极的实用化,必须加深对金属锂负极基础科学问题的认识。本文系统论述了多空间尺度下金属锂的电极行为与对应的表征技术。首先综述了多空间尺度下金属锂负极的基础科学和应用技术问题,结合近年来的工作,对全空间尺度下的先进表征手段做了梳理,分析了从原子级到宏观尺度各种表征手段的技术特点,并重点讨论了各类表征技术在研究固态体系中金属锂负极时的特点与可能的发展方向。     

Active Diluent-Anion Synergy Strategy Regulating Nonflammable Electrolytes for High-Efficiency Li Metal Batteries

High-energy Li metal batteries (LMBs) consisting of Li metal anodes and high-voltage cathodes are promising candidates of the next generation energy-storage systems owing to their ultrahigh energy density. However, it is still challenging to develop high-voltage nonflammable electrolytes with superior anode and cathode compatibility for LMBs. Here, we propose an active diluent-anion synergy strategy to achieve outstanding compatibility with Li metal anodes and high-voltage cathodes by using 1,2-difluorobenzene (DFB) with high activity for yielding LiF as an active diluent to regulate nonflammable dimethylacetamide (DMAC)-based localized high concentration electrolyte (LHCE-DFB). DFB and bis(fluorosulfonyl)imide (FSI⁻) anion cooperate to construct robust LiF-rich solid electrolyte interphase (SEI) and cathode electrolyte interphase (CEI), which effectively stabilize DMAC from intrinsic reactions with Li metal anode and enhance the interfacial stability of the Li metal anodes and LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811) cathodes. LHCE-DFB enables ultrahigh Coulombic efficiency (98.7 %), dendrite-free, extremely stable and long-term cycling of Li metal anodes in Li || Cu cells and Li || Li cells. The fabricated NCM811 || Li cells with LHCE-DFB display remarkably enhanced long-term cycling stability and excellent rate capability. This work provides a promising active diluent-anion synergy strategy for designing high-voltage electrolytes for high-energy batteries.     

氟代溶剂在锂金属电池中的应用

近年来，锂金属电池由于具有较高的能量密度而成为储能领域的研究热点。电解液作为锂金属电池的“血液”发挥着至关重要的作用。在传统锂离子电池电解液中，锂金属负极与电解液之间的界面副反应严重并伴随着锂枝晶生长，从而导致安全隐患以及循环寿命缩短等问题。在解决锂金属负极问题上，电解液调控策略具有易操作性和有效性，因而在推动锂金属电池发展方面具有举足轻重的地位。氟代电解液是目前重要的研究方向，氟代电解液在循环过程中能够在电极表面形成富含LiF的固体电解质界面膜(SEI)；该界面膜不仅可以有效抑制负极锂枝晶的形成，并且在正极方面能够大幅提高电解液的氧化稳定性，从而提升高电压正极的适配性和锂金属电池的循环稳定性。氟代电解液中氟代溶剂/氟代锂盐的分子结构对电解液的溶剂化结构有重要影响。当氟代溶剂分子中氟原子的位置与数量不同时，氟代溶剂的物理化学性质也会随之发生变化，进而改变了电解液与电极的界面反应性。因此，氟代溶剂能够起到调制SEI膜成分和结构的作用，是决定电池性能的关键因素。本文总结了应用于锂金属电池的主要氟代溶剂，尤其是近几年来发展的新型氟代溶剂；着重介绍了高度氟代的溶剂分子作为局域超浓电解液的稀释剂，以及对溶剂进行精准分子设计得到的部分氟代溶剂等。此外，本文还分析探讨了氟代溶剂分子与电池性能之间的构效关系，展望了构建新型氟代溶剂分子的策略，希望能对电解液溶剂分子的结构设计以及构效关系的评估有一定的启发意义。     

氟代溶剂在锂金属电池中的应用

Lithium metal batteries, which use lithium metal as the anode, have attracted tremendous research interest in recent years, owing to their high energy density and potential for future energy storage applications. Despite their advantages such as high energy density, the safety concerns and short lifespan significantly impede their practical applications in transportation and electronic devices. Tremendous efforts have been devoted to overcoming these problems, including materials design, interface modification, and electrolyte engineering. Among these strategies, electrolyte regulation plays a key role in improving the efficiency, stability, and safety of lithium metal anodes. As an important class of electrolyte components, fluorinated solvents, which can decompose to form LiF-rich interphase layers on both anode and cathode, have been proven to enhance the stability of lithium metal anodes and improve the oxidative stability of the electrolytes. Meanwhile, the spatial structure of fluorinated solvents, such as the number and sites of fluorine atoms, can influence the physicochemical properties of the electrolytes and the compositions/structure of the solid-electrolyte interphase, which eventually dictates the cycling performance of Li metal batteries. Recently, many fluorinated solvents with different molecular structures have been designed to regulate the solvation structure of electrolytes, and these solvents exhibit novel electrochemical properties in lithium metal batteries. However, there are few comprehensive reviews that summarize the fluorinated solvents used in Li metal batteries and discuss their functions in electrolytes and their physicochemical properties. This review summarizes the novel fluorinated solvents used in lithium metal batteries in recent years, which have been classified into three parts: diluents, traditional solvents, and novel molecules, based on their functions in the electrolytes. In every part, the understanding of the interactions between fluorinated solvents and Li ions, the decomposition mechanism of fluorinated solvents at the interface of the electrode, the functions of fluorinated solvents in the electrolytes, and the structure-activity relationship between the fluorinated solvents and battery performance have been comprehensively summarized and discussed. Moreover, the advantages and disadvantages of fluorinated solvents have been discussed, and the importance of precisely controlling the number of fluorine atoms and the structure of fluorinated solvents has been emphasized. At the end of this review, a perspective for designing new fluorinated solvents has been proposed. We believe that this review can provide insights on designing novel fluorinated solvents for high-performance Li metal batteries.      

Electrolyte and interphase engineering through solvation structure regulation for stable lithium metal batteries

Lithium metal batteries (LMBs) are considered to be one of the most promising high-energy-density battery systems. However, their practical application in carbonate electrolytes is hampered by lithium dendrite growth, resulting in short cycle life. Herein, an electrolyte regulation strategy is developed to improve the cyclability of LMBs in carbonate electrolytes by introducing LiNO₃ using trimethyl phosphate with a slightly higher donor number compared to NO₃⁻ as a solubilizer. This not only allows the formaion of Li⁺-coordinated NO₃⁻ but also achieves the regulation of electrolyte solvation structures, leading to the formation of robust and ion-conductive solid-electrolyte interphase films with inorganic-rich inner and organic-rich outer layers on the Li metal anodes. As a result, high Coulombic efficiency of 99.1% and stable plating/stripping cycling of Li metal anode in Li||Cu cells were realized. Furthermore, excellent performance was also demonstrated in Li||LiNi_0.83Co_0.11Mn_0.06O₂ (NCM83) full cells and Cu||NCM83 anode-free cells using high mass-loading cathodes. This work provides a simple interphase engineering strategy through regulating the electrolyte solvation structures for high-energy-density LMBs.     

Synthesis Strategies and Applications for Pitch-Based Anode: From Industrial By-Products to Power Sources

It is significant for saving energy to manufacture superb-property batteries. Carbon is one of the most competitive anode materials in batteries, but it is hard for commercial graphite anodes to meet the increasingly higher energy-storage requirements. Moreover, the price of other better-performing carbon materials (such as graphene) is much higher than graphite, which is not conducive to massive production. Pitch, the cheap by-product in the petroleum and coal industries, has high carbon content and yield, making it possible for commercialization. Developing pitch-based anodes can not only lower raw material costs but also realize the pitch′s high value-added utilization. We comprehensively reviewed the latest synthesis strategies of pitch-derived materials and then introduced their application and research progress in lithium, sodium, and potassium ion batteries (LIBs, SIBs, and PIBs). Finally, we summarize and suggest the pitch′s development trend for anodes and in other fields.     

追踪锂金属负极的压力与形貌变化（英文）

采用高载量氧化物正极(>4mAh·cm^-2)和超薄锂金属负极(<50μm)可以构建高比能锂金属二次电池。然而,该类电池的循环寿命和安全性受到锂金属不可控沉积的严重制约。高比表面积的锂枝晶和锂“苔藓”导致了较低的库伦效率,前者有一定可能穿刺隔膜,造成电池内短路,是亟待解决的安全隐患。因此,提升锂金属二次电池的循环寿命和安全性的关键在于实现锂金属的致密沉积。文献中已有多种化学方法可达到这样的效果。由于锂金属较软,受力容易发生形变,对锂金属电池施加机械压力是另一种促进锂金属致密沉积和提高循环性能的方法。然而,机械压力、锂金属形态的演变、和循环性能之间的关系尚未被完全理解。本文报道了一种基于薄膜压力传感器的电池压力测量装置,可以实时跟踪纽扣型锂金属电池内部的压力变化,并且探究外加机械压力对电池循环性能的影响。研究发现,在纽扣电池和高比能的软包电池(5 Ah,>380 Wh·kg^-1)中,一定程度的压力可以促进锂金属的致密沉积,改善电池循环性能;而过大的压力则会导致锂金属向负极内部沉积,造成负极变形和电池性能恶化。我们的研究结果凸显了...     

磷烯包覆的高性能硅基锂离子电池负极材料

Si-based anode materials in Li-ion batteries (LIBs) suffer from severe volume expansion/contraction during repetitive discharge/charge, which results in the pulverization of active materials, continuous growth of solid electrolyte interface (SEI) layers, loss of electrical conduction, and, eventually, battery failure. Herein, we present unprecedented low-content phosphorene (single-layer black phosphorus) encapsulation of silicon particles as an effective method for improving the electrochemical performance of Si-based LIB anodes. The incorporation of low phosphorene amounts (1%, mass fraction) into Si anodes effectively suppresses the detrimental effects of volume expansion and SEI growth, preserving the structural integrity of the electrode during cycling and achieving enhanced Coulombic efficiency, capacity retention, and cycling stability for Li-ion storage. Thus, the developed method can also be applied to other battery materials with high energy density exhibiting substantial volume changes.     

功能化固态电解质膜改性锂金属负极的研究进展

对高比能量锂离子电池需求的不断增加激发了锂金属负极的应用研究。锂金属具有高放电比容量(3860 mAh·g^?1),低电极电位(?3.04 V),是锂离子电池的理想负极材料。然而,锂金属在循环过程中会形成不稳定的固态电解质(SEI)膜,而且会生成枝晶,枝晶的生长会引发电池短路等安全问题,极大地阻碍了其应用。理想的SEI膜应具有良好的锂离子传导性、表面电子绝缘性和机械强度,可调控锂离子在表面均匀沉积,促进离子传输,抑制枝晶生长,因此构筑功能化SEI膜是解决锂金属负极所面临挑战的一项有效策略。本综述以锂金属枝晶形成和生长的机理为出发点,分析总结SEI膜的构建策略、不同组成SEI膜的结构和功能特性及其对锂金属负极性能的影响,并对锂金属实用化面临的挑战及未来发展方向进行了展望。     

锂离子电池氧化亚硅负极结构优化和界面改性研究进展

氧化亚硅(SiO)作为锂离子电池负极材料,具有较高的理论比容量(~2043 mAh·g^-1)以及合适的脱锂电位(< 0.5 V),且原料储量丰富、制备成本较低、对环境友好,被认为是下一代高能量密度锂离子电池负极极具潜力的候选材料。然而,SiO在脱/嵌锂过程中存在着较严重的体积效应(~200%),易导致材料颗粒粉化、脱落,严重影响了SiO负极电极的界面稳定性和电化学性能。近年来,人们围绕SiO负极结构优化和界面改性开展了大量工作。本文先从SiO负极材料的结构特点出发,阐述了该材料面临的主要瓶颈问题;继而从SiO的结构优化、SiO/碳复合和SiO/金属复合等三方面,系统总结了迄今已有的SiO负极结构设计和界面调控策略,并分别对其方法特点、电化学性能以及二者间关联规律进行了比较和归纳,最后对SiO负极材料结构和界面改性的未来发展方向进行了展望。