锂金属电池用高浓度电解液体系研究进展

锂金属二次电池具有极高的能量密度,是下一代储能电池的研究热点。然而,金属锂负极在传统碳酸酯电解液1 mol·L^?1 LiPF6-EC/DEC(ethylene carbonate/diethyl carbonate)中充放电时,存在严重的枝晶生长和循环效率低下等问题,阻碍了其商业化应用。因此,开发与锂负极兼容的新型电解液体系是目前重要的研究任务。与传统稀溶液相比,高浓度电解液体系具有独有的物化性质和优异的界面相容性,并且能有效抑制锂枝晶生长、显著提升锂负极的循环可逆性,因而格外受到关注。本文综述了高浓度电解液及局部高浓电解液体系的最新研究进展,分析了其溶液化学结构和物化性质,对其与锂负极的界面相容性、枝晶抑制效果、效率提升能力及界面稳定性机制进行了探讨;文章着重介绍了高浓与局部高浓电解液体系在锂金属二次电池中的应用,同时从基础科学研究和应用研究两个层面对高浓电解液和局部高浓电解液存在的主要问题进行了简要分析,并对其未来发展方向进行了展望。

Research Progress on High Concentration Electrolytes for Li Metal Batteries

Improvement in the energy density of conventional lithium-ion batteries (LIBs), based on the intercalation-extraction chemistry of graphite and transition metal layered oxides, has apparently lagged behind the advances in consumer electronics and electric vehicles. Secondary Li-metal batteries (LMBs), utilizing metallic Li as the anode material, have incomparable advantages in terms of energy density due to their high specific capacity (3860 mAh·g^-1) and low redox potential (-3.04 V vs. standard hydrogen electrode) of Li metal. Irrespective of whether Li anodes are coupled with intercalation-type cathodes (e.g. LiFePO₄, LiCoO₂, LiNi_xCo_yMn_zO₂, etc.) or conversion-type cathodes (S, O₂), the energy density of LMBs is much higher than that of traditional LIBs, which should solve the range concern of electric vehicles. However, the intrinsically high reactivity between metallic Li and organic electrolytes could induce the formation of a solid electrolyte interface (SEI). The heterogeneous SEI, consisting of a flexible organic outer layer and a brittle inorganic inner layer, suffers from repeated rupture and regeneration due to infinite volume expansions associated with Li deposition and dissolution reactions. Meanwhile, Li is preferentially deposited on the "hot sites" and is stripped from the root of sediments, resulting in uncontrolled dendrite growth during charging and formation of electrochemically isolated Li ("dead" Li) during discharging. Thus, the Columbic efficiency of Li metal full cells is greatly limited by interfacial side effects and continuous loss of active Li, especially in conventional carbonate-based electrolyte, viz. 1 mol·L^-1 LiPF₆-EC/DEC (ethylene carbonate/diethyl carbonate), which impedes the large-scale employment of Li metal batteries. Recently, novel electrolytes with high or localized-high salt concentrations have attracted considerable attention because of their unique physiochemical properties and excellent electrochemical performance. In high-concentration electrolytes, the reduction in the population of free solvent molecules inhibits irreversible electrolyte decomposition at the electrode-electrolyte interface. In localized-high-concentration electrolytes, the introduction of a dilute reagent retains the desired solvation structure, while improving the physicochemical properties (conductivity and viscosity) of the electrolyte. Herein, we systemically review the latest progress in high-concentration and localized-high-concentration electrolytes for use in Li metal batteries. The solvation chemistry structure, physicochemical properties, and interfacial-stabilizing mechanisms are analyzed in detail, and special attention is devoted to their superior interfacial compatibility with Li metal anodes. Finally, we briefly clarify the current problems associated with the research of high-concentration and localized-high-concentration electrolytes from the viewpoints of basic scientific research and practical applications, and some possible solutions are provided to further pave the way to practical Li metal batteries.