A structural and corrosion study of triethoxysilyl functionalized POSS coatings on AA 2024 alloy

A novel bifunctional polyhedral oligomeric silsesquioxane (POSS) based silane precursor R(x)R'(y)(SiO(3/2))(8), (x + y = 8), bearing 3-(N-(3-triethoxysilylpropyl)ureido)propyl (ureasil - U) and isooctyl (IO) groups (i.e., U(2)IO(6) POSS) was synthesized, and the corresponding coatings, prepared under the acid hydrolysis conditions, were studied in order to assess their corrosion inhibition of the AA 2024-T3 alloy. The U(2)IO(6) POSS precursor was made in two steps: in the first, an appropriate stoichiometric (2:6) mixture of 3-aminopropyltriethoxysilane (AP(2)) and isooctyltrimethoxysilane (IO(6)) was autoclaved under basic hydrolysis conditions giving AP(2)IO(6)(SiO(3/2))(8) cubes, which were reacted in the second step with 3-isocyanatopropyltriethoxysilane (ICPTES), leading to the bis end-capped sol-gel precursor U(2)IO(6) POSS having a cube-like structure. Coatings were made from sols catalyzed with acidified water. IR and (29)Si NMR spectroscopic studies combined with mass spectrometric measurements were employed to confirm the cube-like structure of AP(2)IO(6) and U(2)IO(6) POSS. The structure and morphology of the U(2)IO(6) POSS coatings were studied with the help of infrared reflection-absorption (IR RA) spectroscopic measurements combined with XPS and AFM measurements, providing information about the formation of partially self-assembled coatings. The degree of corrosion inhibition was assessed from the potentiodynamic measurements showing around 10 times smaller current densities for the coatings only 30-40 nm thick. Ex situ IR RA spectroelectrochemical measurements were performed by consecutive measurements of the IR RA spectra of U(2)IO(6) POSS coatings which were chronocoulometrically charged at different potentials. At potentials more positive than the corrosion potential (E(corr) approximately -0.5 V), the amide I bands shifted, indicating the formation of new urea-urea aggregations and associations, with the newly formed strong band at 1680-1690 cm(-1) suggesting the formation of amidonium ions. These results showed that the urea groups represented the weakest part of the coatings due to their tendency to protonation.     

Effect of silane‐grafted polypropylene on the morphology of polypropylene and nylon 6/clay composites

Polypropylene (PP)/nylon 6/clay composites were prepared by compounding of PP, which had previously been treated with two kinds of silane compounds, with a master batch composed of 90 wt % of nylon 6 and 10 wt % of octadecyl amine‐modified sodium montmorillonite (NM10). The morphology of the composites was investigated by means of SEM, TEM, XRD, and energy‐dispersive X‐ray analysis. All of the composites exhibited a phase‐separated morphology, irrespective of whether the PP was modified with the silane compounds or not. However, adhesive strength between the modified PP and NM10 was stronger than that between neat PP and NM10. Moreover, the PP grafted with 3‐(trimethoxysilyl)propyl methacrylate (PP2) reacted with the silanol groups of the clay to form PP‐clay hybrid during the compounding, which acted as a compatibilizer for the PP/nylon 6/clay composite. PP2NM composite (PP2/NM10 80/20 on weight basis) exhibited a peculiar morphology, in that the PP‐rich phase formed island domains within the nylon 6‐rich domains, which were in turn dispersed in the PP‐rich continuous matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 607–615, 2007.     

How to prepare reproducible, homogeneous, and hydrolytically stable aminosilane-derived layers on silica

Five functional silanes--3-aminopropyltriethoxysilane (APTES), 3-aminopropyltrimethoxysilane (APTMS), N-(2-aminoethyl)-3-aminopropyltriethoxysilane (AEAPTES), N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (AEAPTMS), and N-(6-aminohexyl)aminomethyltriethoxysilane (AHAMTES)--were assessed for the preparation of hydrolytically stable amine-functionalized silica substrates. These can be categorized into three groups (G1, G2, and G3) based on the intramolecular coordinating ability of the amine functionality to the silicon center. Silanizations were carried out in anhydrous toluene as well as in the vapor phase at elevated temperatures. Aminosilane-derived layers prepared in solution are multilayers in nature, and those produced in the vapor phase have monolayer characteristics. In general, vapor-phase reactions are much less sensitive to variations in humidity and reagent purity, are more practical than the solution-phase method, and generate more reproducible results. Intramolecular catalysis by the amine functionality is found to be important for both silanization and hydrolysis. The primary amine group in the G1 silanes (APTES and APTMS) can readily catalyze siloxane bond formation and hydrolysis to render their silane layers unstable toward hydrolysis. The amine functionality in the G3 silane (AHAMTES) is incapable of intramolecular catalysis of silanization so that stable siloxane bonds between the silane molecules and surface silanols do not form easily. The secondary amine group in the G2 silanes (AEAPTES and AEAPTMS), on the other hand, can catalyze siloxane bond formation, but the intramolecular catalysis of bond detachment is sterically hindered. The G2 silanes are the best candidates for preparing stable amine-functionalized surfaces. Between the two G2 aminosilanes, AEAPTES results in more reproducible silane layers than AEAPTMS in the vapor phase due to its lower sensitivity to water content in the reaction systems.     

Synthesis of New Potential Hydrophobic Agents Composed of Three-Module Type Molecules

A new synthetic route was developed to three-module type potential hydrophobic agents, with the molecule consisting of an N-[3-(triethoxysilyl)propyl]amide anchor part (I), a connecting unit formed upon 1,3-propansultone ring cleavage (II), and a polyfluoroheptyloxy functional hydrophobic spacer (III). Proceeding from commercially available polyfluorinated heptanols 1a and 1b and 1,3-propanesultone 3, potassium sulfonates 4a and 4b were prepared. The reaction of 4a and 4b with phosphorus oxychloride resulted in the first synthesis of fluorine-containing sulfonyl chlorides 5a and 5b, which were reacted with 3-aminopropyltriethoxysilane 6 to give the target N-[3-(triethoxysilyl)propyl]-3-(polyfluoroheptyloxy)propane-1-sulfonamides 7a and 7b. The structures of the compounds were proved by NMR spectroscopy, mass spectrometry, and elemental analysis. The studies of their hydrophobizing properties are in progress.     

An Organic/Inorganic Hybrid Polymer

Poly(N-acetylethylenimine) (polyoxazoline) (POZO) with a terminal triethoxysilyl group was successfully synthesized by the ring-opening polymerization of 2-methyl-2-oxazoline followed by termination with 3-aminopropyltriethoxysilane. Triethoxysilyl-terminated telechelic POZO was prepared by using a bifunctional initiator. These silane coupling POZOs were subjected to acid-catalyzed cohydrolysis polymerization with tetraethoxysilane by the so-called “sol-gel” method to produce a novel organic/inorganic hybrid polymer (block copolymer), which was a homogeneous transparent/glassy composite material. The obtained hybrid showed higher hydrophilic properties compared with silica gel without POZO segments. On the other hand, a hybrid polymer consisting of poly(2-ethyl-2-oxazoline) and silica gel, which absorbed both water and organic solvents, showed amphiphilic properties. POZO segments were eliminated by pyrolysis of the present hybrid polymer to produce a silica with micropores.     

Fabrication of Siloxane Hybrid Material With High Adhesion and High Refractive Index for Light Emitting Diodes (LEDs) Encapsulation

A novel inorganic-organic siloxane hybrid material with self-adhesion ability and high refractive index for high-power light emitting diodes (LEDs) encapsulation is introduced. Under the catalysis of an anion exchange resin, the hybrid material was synthesized by a sol-gel condensation process from methacryloxy propyl trimethoxyl silane (MPTS), γ-(2, 3-epoxypropoxy)propytrimethoxysilane (EPTS) and diphenylsilanediol (DPSD). This hybrid material was characterized by Fourier-transform infrared spectroscopy and ¹H-NMR. The resin-type encapsulation material was then prepared by hydrosilylation of the newly synthesized inorganic-organic siloxane hybrid material and methylphenyl hydrogen-containing silicone resin. The cured silicone resin-type encapsulation material can be used as a LEDs encapsulant, owing to high refractive index (n = 1.544), high transparency, appropriate hardness, and excellent thermal stability, as well as good adhesive strength between the encapsulating material and the substrate of LED lead frame.     

Hydrolysis-Condensation Kinetics of Different Silane Coupling Agents

Abstract

The hydrolysis kinetics of 14 alkoxy silane coupling agents were carried out in an ethanol:water 80:20 (w/w) solution under acidic conditions and were monitored by ¹H, ¹³C, and ²⁹Si NMR spectroscopy. Acidic conditions were selected in order to enhance the silanol formation and to slow down the self-condensation between the resulting hydrolysed silanol groups. In situ ²⁹Si NMR spectroscopy allowed the determination of the intermediate species as a function of the reaction time. Thus, the following silane coupling agents were studied: 3-methacryloxypropyl trimethoxy silane (MPMS), 3-mercaptopropyl trimethoxy silane (MRPMS), 3-cyanopropyl triethoxy silane (CPES), triethoxy vinyl silane (VES), trimethoxy (2-phenylethyl) silane (PEMS), octyl triethoxy silane (OES), trimethoxy (7-octen-1-yl) silane (OEMS), 3-aminopropyl triethoxy silane (APES), 3-aminopropyl trimethoxy silane (APMS), 3-(2-aminoethylamino)propyl trimethoxy silane, (DAMS), 3-[2-(2-aminoethylamino)-ethylamino]propyl trimethoxy silane (TAMS), 4-amino-3,3-dibutyl trimethoxy silane (ADBMS), trimethoxy [3-(phenylamino)propyl] silane (PAPMS), and triethoxy-3-(2-imidazolin-1-yl) propyl silane (IZPES). A parameter quantifying the grafting potentiality of each silane coupling agent towards OH-rich solid substrates (such as cellulose) was established as a function of the nature of the alkoxy groups (methoxy or ethoxy), as well as that of the fourth substituent (vinyl, aminopropyl, etc.) of the silane studied.

GRAPHICAL ABSTRACT     

纳米SiO_2/聚丙烯酸酯复合乳液的制备与表征

根据核壳乳液聚合理论,以经过硅烷偶联剂表面改性的纳米SiO2为种子,采用适当的乳液聚合工艺,制备了纳米SiO2/聚丙烯酸酯复合乳液,并表征了其性能.结果表明,纳米SiO2经过改性后,硅烷偶联剂接枝在其表面;以其为种子制备的复合乳液具有核壳结构,其热稳定性有所提高.     

Tripodal pyrene chromophores for semiconductor sensitization: new footprint design

Large footprint tripodal linkers for metal oxide nanoparticle sensitization, substituted with pyrene as the dye, and three COOR binding groups in para or meta position, were prepared to study the effect of the anchoring group position and of the footprint size on the sensitization processes. Two tripods based on tetraphenylsilane, (1-pyrenyl-4-ethynyl-phenyl)-tris(4-carbomethoxyphenyl-4-ethynyl-phenyl)silane, and (1-pyrenyl-4-ethynyl-phenyl)-tris(4-(4-methoxybenzyloxycarbonyl)phenyl-4-ethynyl-phenyl)silane, decomposed during hydrolysis, while the tetraphenyladamantane derivative, 1-(1-pyrenyl-4-ethynyl-phenyl)-3,5,7-(3-carbomethoxyphenyl-4-ethynyl-phenyl)adamantane, was chemically stable and was readily converted into the corresponding acid and bound to TiO₂ films. The FT-IR-ATR spectrum of 1-(1-pyrenyl-p-ethynyl-phenyl)-3,5,7-(3-carboxyphenyl-4-ethynyl-phenyl)adamantane bound to TiO₂ nanoparticles showed bands characteristic of carboxylate bidentate bonds. The UV-vis absorption and fluorescence emission in THF solution at room temperature were typical of pyrenes substituted with oligophenyleneethynylene linkers.     

A bifunctional poly(ethylene glycol) silane immobilized on metallic oxide-based nanoparticles for conjugation with cell targeting agents

A trifluoroethylester-terminal poly(ethylene glycol) (PEG) silane was synthesized and self-assembled on iron oxide nanoparticles. The nanoparticle system thus prepared has the flexibility to conjugate with cell targeting agents via either carboxylic or amine terminal groups for a number of biomedical applications, including magnetic resonance imaging (MRI) and controlled drug delivery. The trifluoroethylester silane was synthesized by modifying a PEG diacid to form the corresponding bistrifluoroethylester (TFEE), followed by a reaction with 3-aminopropyltriethoxysilane (APS). The APS coupled with PEG chains confers the stability of PEG self-assembled monolayers (SAMs) and increases the PEG packing density on nanoparticles by establishing hydrogen bonding between the carbonyl and amine groups present within the monolayer structure. The success of the synthesis of the PEG TEFE silane was confirmed with (1)H NMR and Fourier transform infrared spectroscopy (FTIR). The conjugating flexibility of the PEG TEFE was demonstrated with folic acid that had carboxylic acid groups and amine terminal groups, respectively, and was confirmed by FTIR. TEM analysis showed the well-dispersed nanoparticles before and after they were coated with PEG and folic acid.     

A novel sol-gel calix[4]arene-modified capillary column for open-tubular capillary electrochromatography

A novel open-tubular CEC (OT-CEC) column was prepared by immobilized 5,11,17,23-tetra-tert-butyl-25,27-diethoxy-26,28-dihydroxy-calix[4]arene (Calix[4]) on fused-silica capillary column with sol-gel technology. Calix[4] was initially reacted with gamma-glycidoxypropyltrimethoxysilane (KH-560) to form a new sol-gel precursor (calix[4]-KH-560), and then mixed with another precursor, namely tetraethoxysilane (TEOS). After hydrolysis and condensation, a sol-gel matrix was obtained, in which calix[4] was incorporated. Successful calix[4]-modified sol-gel coating was suggested by infrared (IR) spectra and greatly decreased EOF. In comparison with OT columns prepared by the sol-gel method with TEOS and KH-560 only, the calix[4]-modified sol-gel column showed greatly improved separation of isomeric toluidines, nitrophenols, picolines and neurotransmitters with structural similarity. Migration time and theoretical plate number reproducibility were satisfactory with RSDs less than 1 and 6% each for within column runs and not more than 3 and 7% each for column-to-column measurements, using toluidine and nitrophenol isomers as test solutes on this column. High separation efficiencies (96,000-300,000 plates/m) for basic toluidine isomers were obtained. This column was also successfully employed to combine extraction procedure for the determination of dopamine (DA) and norepinephrine (NE) in Portulaca oleracea L. The recoveries of DA and NE were 93.3 and 94.2%, respectively.     

Spectral characterisation of new organic fluorescent dyes with an alkoxysilane moiety and their utilisation for the labelling of layered silicates

New fluorescence dyes with an alkoxysilane moiety were synthesised by the condensation of 3-(triethoxysilyl)-1-propanamine (3-aminopropyltriethoxysilane) with 4,10-benzothioxanthene-3,1′-dicarboxylic acid anhydride (BTXA) and N,N-dimethylaminonaphthalene-1,8-dicarboxylic acid anhydride (DMANA), which was accompanied by the formation of an imidic bridge. The compounds N-(3-(triethoxysilyl)propyl)-thioxantheno[2,1,9-dej]isoquinoline-1,3-dione (BTX-S) and 4-(N′, N′-dimethyl)-N-(triethoxysilyl)propyl-1,8-naphthalene dicarboxylic acid imide (DMAN-S) were characterised by steady-state and time-resolved fluorescence spectroscopy in chloroform and ethanol. Both conjugates (BTX-S and DMAN-S) exhibited absorption and emission bands in the same region as the un-substituted BTXA and DMANA. An important Stokes shift was observed for DMAN-S in ethanol. A high fluorescence quantum yield was observed for BTX-S in both solvents and for DMAN-S in chloroform. In addition, the newly developed fluorescent silane dyes were covalently attached to the microscopic particles of layered silicates and on the surface of SiO₂ wafers as a proof of concept for fluorescence particle (surface) visualisation. The surface wafer modification was precisely characterised by X-ray photoelectron spectroscopy (XPS). Successful covalent linkage onto the particles of layered silicates was proved by confocal laser scanning microscopy technique.     

Solvolysis–hydrolysis of N-bearing alkoxysilanes: Reactions studied with 29Si NMR

The hydrolysis reactions of 8 different N-bearing alkoxy-silane coupling agents, namely: 3-cyanopropyl triethoxy silane (CPES), triethoxy-3-(2-imidazolin-1-yl) propyl silane (IZPES), and amino silanes, 3-aminopropyl triethoxy silane (APES), 3-aminopropyl trimethoxy silane (APMS), 3-(2-aminoethylamino)propyl trimethoxysilane (DAMS), 3-[2-(2-aminoethylamino)ethylamino] propyl trimethoxysilane (TAMS), 4-amino-3,3-dibutyl trimethoxy silane (ADBMS) and trimethoxy [3-(phenylamino)propyl] silane (PAPMS) were carried out in ethanol/water 80/20 (w/w) solutions in acidic media and followed in situ by ¹H-, ¹³C- and ²⁹Si-NMR spectroscopy. Acidic conditions were selected in order to enhance the formation of silanol and to slow down the self condensation reactions of the hydrolyzed functions. ²⁹Si NMR spectroscopy revealed the formation of intermediate species, particularly the solvolysis of γ-amino silanes by reaction exchange with the alcoholic solvent.     

Bi-hybrid coatings: polyaniline-montmorillonite filler in organic-inorganic polymer matrix

A bi-hybrid composite is represented by an organic-inorganic (O-I) filler dispersed in an O-I matrix. Polyaniline-montmorillonite, as a nanocomposite filler, was synthesised by two independent processes: (1) montmorillonite was surface-modified with a conducting polymer, polyaniline, during the in-situ oxidation of aniline or (2) montmorillonite was pre-treated with aniline, then the aniline was polymerised and the polyaniline subsequently produced penetrated the montmorillonite structure. The organic-inorganic polymer matrix was formed in two independent steps: (1) inorganic building units were formed in situ by the sol-gel process, (2) followed by organic polymeric matrix formation by polyaddition reactions of epoxy groups with amines. Polyaniline-montmorillonite filler was added to the reaction system between these two steps, i.e. when the inorganic structures of the O-I matrix have already been formed but prior to formation of the organic polymeric matrix. Two different O-I matrices were prepared from functionalised organosilicon precursors and oligomeric amines. 3-[(Glycidyloxy)propyl]trimethoxysilane reacted with α,ω-oligo(propylene oxide) diamine and diethoxy[3-(glycidyloxy)propyl]-methylsilane reacted with α,ω-oligo(propylene oxide) triamine. The resulting bi-hybrid coatings, the O-I filler dispersed in the O-I matrix, were characterised by atomic-force and optical microscopies, and also by tensile tests. The filler composition affected both the mechanical and surface properties of the coatings.     

Simple method for preparation of nanostructure on microchannel surface and its usage for enzyme-immobilization

We developed a novel preparation method of nanostructure on the microchannel surface formed by sol-gel like simple treatment with 3-aminopropyltriethoxysilane, which is suitable for a highly efficient enzyme-immobilized microchannel reactor.     

Grafting of montmorillonite with different functional silanes via two different reaction systems

Silane grafted montmorillonites were synthesized by using 3-aminopropyltriethoxysilane and trimethylchlorosilane via two different grafting reaction systems: (a) ethanol-water mixture and (b) vapor of silane. The resulting products were investigated using Fourier transform infrared (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA). XRD patterns demonstrate that silane was intercalated into the montmorillonite gallery, as indicated by the increase of the basal spacing. The product prepared by vapor deposition has a larger basal spacing than that obtained from solution, due to the different extent of silane hydrolysis in various grafting systems. TGA curves indicate that the methyl groups penetrate into the siloxane clay are the primary reason for the decrease of the dehydroxylation temperature of the grafted products. 3-Aminopropyltriethoxysilane in the grafted montmorillonite adopts a bilayer arrangement while trimethylchlorosilane adopts a monolayer arrangement within the clay gallery.     

3-Aminopropyltriethoxysilane-functionalized manganese doped ZnS quantum dots for room-temperature phosphorescence sensing ultratrace 2,4,6-trinitrotoluene in aqueous solution

New strategies for silica coating of inorganic nanoparticles became a research hotspot for enhancing the mechanical stability of colloidal particles and protecting colloidal particles against oxidation and agglomeration, and so on. In this paper, 3-aminopropyltriethoxysilane (APTES)-functionalized Mn doped (AF MnD) ZnS QDs was prepared to be firsyly through the use of silane coupling agents to form an active layer of silica, then sol-gel reaction of TEOS co-deposited with APTES on the surface of resultant active layer of silica. The emitted long lifetime room-temperature phosphorescence (RTP) of the resultant nanomaterials allows an appropriate delay time so that any fluorescent emission and scattering light can be easily avoided. The APTES anchored on the layer of silica can bind 2,4,6-trinitrotoluene (TNT) species to form TNT anion through acid-base pairing interaction, the TNT anion species may increase the charge-transfer pathways from the nanocrystals to nitroaromatic analytes, therefore further enhance the quenching efficiency of RTP. Moreover, APTES as capped reagents can enlarge the spectral sensitivity and enhance RTP response of nanocrystals to the electron-deficient nitroaromatic and nitrophenol species. Meanwhile, AF MnD ZnS QDs also exhibited a highly selective response toward TNT analyte through significant color change and quenching of ⁴T₁ to ⁶A₁ transition emission. This AF MnD ZnS QDs based sensor showed a very good linearity in the range of 0.05-1.8 μM with detection limit down to 50 nM (quenching percentage of phosphorescence intensity of 8%) and RSD of 3.5% (n = 5). The reported QDs-based chemosensors here open up a promising prospect for the sensitive and convenient sensing of TNT explosive.     

Dimethylheptyl [3-(N-hetaryl)propyl]silanes: Synthesis,antimicrobial and antiblastic activity

The alkylation of monoazoles, diazoles, triazoles and tetrazoles with dimethylheptyl(3-iodopropyl)silane using liquid/liquid phase-transfer catalysis affords the corresponding [3-(N-azolyl)propyl]silanes in high yield, by which means the nonsymmetric ambident heterocycles 1,2,4-triazole and tetrazole undergo alkylation regiospecifically in position 1 and 2, respectively. Dimethylheptyl[3-(N-imidazolyl)propyl]silane demonstrated high fungistatic activity with respect to S. cerevisiae and T.rubrum in combination with high cytotoxicity.     

Molecular mobility in hybrid materials: A study of the 3(Trimethoxysilyl) propyl methacrylate-methyl methacrylate system

Hybrid glasses based on 3(Trimethoxysilyl) propyl methacrylate (TMSM) and methyl methacrylate (MMA) were successfully prepared by sol-gel process. The molecular mobility of hybrid materials was studied by mean of high resolution dynamic mechanical spectrometry technique. The results of hybrid materials were compared with those of polymethylmethacrylate (PMMA) prepared in the same conditions and interpreted in term of local or large-scale molecular motion.     

Low-temperature reaction of trialkoxysilanes on silica gel: a mild and controlled method for modifying silica surfaces

The room temperature reaction of 4-(triethoxysilyl)butyronitrile, 4-TBN ((C2H5O)3Si(CH2)3CN), on weakly hydrated silica samples pretreated at 393 K has been studied by desorption experiments and by diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy at different aging times under various water partial pressures. The reaction is demonstrated by the decrease of desorption of 4-TBN with time and the simultaneous disappearance of the 2980 and 1394 cm(-1) signals in the DRIFT spectra, assigned to the CH3 moiety of the ethoxy functions. Water partial pressure is shown to have a crucial effect on the rate and efficiency of the process as, after 6 days, for samples kept at room temperature under vacuum, ca. 50% of the silane has reacted, while for those kept in a water-saturated atmosphere the silane reaction reaches 96%. Although the silane appears to be irreversibly bonded to the surface, no definite conclusion may be drawn from these preliminary results as to the nature of the bonding (grafting or coating). These samples are compared to modified silicas prepared according to conventional methods. The same extent of silane reaction (50%) is achieved for preadsorbed samples kept under vacuum and either cured at 473 K for 30 h or kept at room temperature for 6 days. A mild and controlled modification of silica by triethoxysilanes can thus be achieved by first physisorbing known amounts of the modifying silanes from an organic solvent on pretreated silica and then letting the samples mature for a few days at room temperature in a water-saturated atmosphere.