Phosphorus containing polymers. III. Polyimidophosphonates

Synthesis of dihydroxybisimide monomers and their subsequent polycondensation with dichlorophenylphosphine oxide by use of a phase-transfer catalyst are reported. The monomers were characterized by melting point, elemental analysis, and IR spectroscopy. The polyimidophosphonates were characterized by viscosity measurement, molecular weight determination, elemental analysis, IR, ESCA, ¹H-NMR, ³¹P-NMR, and X-ray diffraction. Thermal stability and glass transition temperature (T_g) of the polymers were evaluated by TGA, DTA, and TMA. These polymers are self-extinguishing and readily soluble in highly polar solvents like DMF, DMSO, DMAC, NMP, HMPA, etc. © 1994 John Wiley & Sons, Inc.     

The influence of comonomer (2‐hydroxyethyl acrylate) and keto group on photocrosslinking property of arylidene polymers

Two types of arylidene compounds were synthesized by reacting p‐hydroxybenzaldehyde with acetone [1,5‐bis(4‐hydroxyphenyl)penta‐1,4‐dien‐3‐one] (PBHP) and cyclohexanone [2,6‐bis(4‐hydroxybenzylidene)cyclohexanone] (HBC). 1,4‐Pentadien‐3‐one‐1‐p‐hydroxyphenyl‐5‐p‐phenyl methacrylate (PHPPMA) and 4‐{[‐3‐(4‐hydroxybenzylidene)‐2‐oxocyclohexylidene]methyl}phenyl acrylate (HBA) were prepared by reacting PBHP and HBC with methacryloyl chloride and acryloyl chloride in the presence of triethylamine, respectively. Copolymerization of different feed compositions of PHPPMA and HBA with 2‐hydroxyethyl acrylate (HEA) was carried out using a free‐radical solution polymerization technique in ethyl methyl ketone (MEK) using benzoyl peroxide (BPO). All the monomer and polymers were characterized by IR and NMR (¹H/¹³C) spectroscopic techniques. The reactivity ratio of the monomers were obtained using Fineman–Ross (FR), Kelen–Tudos (KT), and extended Kelen–Tudos (exKT) methods. The photocrosslinking properties of the polymers were done using a UV absorption spectroscopy technique. Homopolymers of both the arylidene polymers shows similar trend towards the rate of photocrosslinking. The rate of photocrosslinking was enhanced when the cyclohexanone based arylidene monomer was copolymerized with HEA. Thermal stability and molecular weights (M_w and M_n) of the polymers were determined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3433–3444, 2004     

Synthesis and properties of poly (diphenylacetylenes) having aliphatic para-substituents

1-(p-t-Butylphenyl)-2-phenylacetylene and 1-(p-n-butylphenyl)-2-phenylacetylene were polymerized in catalytic systems based on TaCl₅ to give new polymers in high yields. These monomers were more reactive than diphenylacetylene (DPA) in copolymerization. Unlike poly (DPA), the present polymers were soluble in toluene, CHCl₃, etc. owing to the high configurational entropy induced by the para-substituents. Their relative weight-average molecular weights determined by GPC were in the range of 6 × 10⁵–36 × 10⁵, and films could be obtained by solution casting. These polymers were fairly thermally stable, as seen from their high onset temperatures (320–380°C) of weight loss in TGA in air. The oxygen permeability coefficient of the polymer with t-Bu group was 1100 barrers, the highest among those of all the hydrocarbon polymers. © 1994 John Wiley & Sons, Inc.     

Hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s: Synthesis,characterization, end‐group modification,and optical properties

Novel AB₂‐type monomers such as 3,5‐bis(4‐methylolphenoxy)benzoic acid ( monomer 1 ), methyl 3,5‐bis(4‐methylolphenoxy) benzoate ( monomer 2 ), and 3,5‐bis(4‐methylolphenoxy)benzoyl chloride ( monomer 3 ) were synthesized. Solution polymerization and melt self‐polycondensation of these monomers yielded hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s. The structure of these polymers was established using FTIR and ¹H NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 2.0 × 10³ to 1.49 × 10⁴ depending on the polymerization techniques and the experimental conditions used. Suitable model compounds that mimic exactly the dendritic, linear, and terminal units present in the hyperbranched polymer were synthesized for the calculation of degree of branching (DB) and the values ranged from 52 to 93%. The thermal stability of the polymers was evaluated by thermogravimetric analysis, which showed no virtual weight loss up to 200 °C. The inherent viscosities of the polymers in DMF ranged from 0.010 to 0.120 dL/g. End‐group modification of the hyperbranched polymer was carried out with phenyl isocyanate, 4‐(decyloxy)benzoic acid and methyl red dye. The end‐capping groups were found to change the thermal properties of the polymers such as T_g. The optical properties of hyperbranched polymer and the dye‐capped hyperbranched polymer were investigated using ultraviolet‐absorption and fluorescence spectroscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5414–5430, 2008     

Syntheses and radical polymerizations of optically active (meth)acrylamides having amino acid moieties

Syntheses and radical polymerizations of several (meth)acrylamides having L -amino acid moieties were examined. The monomers were prepared by the reactions of L -amino acid ester hydrochlorides with (meth)acryloyl chloride in the presence of triethylamine in satisfactory yields. Radical polymerizations of the monomers were carried out in the presence of AIBN (1 mol %) in bulk and in several solvents to afford the corresponding polymers in satisfactory yield. The glass transition temperatures and specific rotations of the polymers depended on the substituents of the L -amino acid moieties. Nearly the same specific rotations were observed for the monomers and the model compounds of the polymer units, N-pivaloyl amino acid methyl esters. On the contrary, the specific rotations of the polymers shifted to the negative direction in ca. 30°. The interaction between the polymer side chains might affect the changes in the specific rotations from monomers to polymers. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2619–2629, 1997     

Synthesis and properties of novel phosphorus‐containing thermotropic liquid crystalline copoly(ester imide)s

A series of novel phosphorus‐containing polyesterimides were prepared from diols—a mixture of a new aromatic phosphorus‐containing bisphenol, namely 1,4‐bis[N‐(4‐hydroxyphenyl)phthalimidyl‐5‐carboxylate]‐2‐(6‐oxido‐6H‐dibenz<c,e><1,2>oxaphosphorin‐6‐yl)‐naphtalene, with aliphatic diols such as 1,3‐propanediol, 1,4‐butanediol, 1,5‐pentanediol, 1,6‐hexanediol, and 1,12‐dodecanediol—and an aromatic diacid chloride containing two preformed ester groups, namely terephthaloyl‐bis‐(4‐oxibenzoyl‐chloride), via high‐temperature polycondensation in o‐dichlorobenzene. The structures of monomers and polymers were verified by means of Fourier transform infrared (FTIR) spectroscopy and ¹H NMR spectroscopy. The molar ratio of aromatic bisphenol to aliphatic diol was varied to generate a series of copolyesterimides with tailored physicochemical properties, structure–properties relationships being established. The effect of the phosphorus content on the thermal properties and the flame retardancy was evaluated by means of thermogravimetric analysis (TGA), TGA–FTIR, and scanning electron microscopy. The polymers were stable up to 340 °C showing a 5% weight loss in the range of 340–395 °C and a 10% weight loss in the range of 370–415 °C. The char yields at 700 °C were in the range of 13.6–38% increasing with the content of phosphorus‐containing bisphenol. The effect of the aliphatic content on the liquid crystalline behavior was investigated by polarized light microscopy, differential scanning calorimetry, and X‐ray diffraction. The transition temperatures from crystal to liquid crystalline melt were in the range of 209–308 °C. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis,photopolymerization, and adhesive properties of hydrolytically stable phosphonic acid‐containing (meth)acrylamides

Three novel dental monomers containing phosphonic acid groups ( 1a and 2a , based on diethyl amino(phenyl)methylphosphonate and 3a based on diethyl 1‐aminoheptylphosphonate) were synthesized in two steps: the reaction of α‐aminophosphonates with acryloyl chloride (for monomers 1a and 3a ) or methacryloyl chloride (for 2a ) to give monomers with phosphonate groups, and the hydrolysis of phosphonate groups by using trimethyl silylbromide. Their (and the intermediates') structures were confirmed by FTIR, ¹H, ¹³C, and ³¹P NMR spectroscopy. All the monomers dissolve well in water (1<pH<2) and are hydrolytically stable. Their homo‐ and copolymerizations with 2‐hydroxyethyl methacrylate (HEMA) and HEMA/glycerol dimethacrylate were investigated with photo‐DSC. Thermal polymerization of the new monomers in water or in ethanol/water solution was investigated, giving polymers in good yields. X‐ray diffraction results showed only dicalcium phosphate dehydrate formation upon interaction of 1a ‐ 3a with hydroxyapatite indicating its strong decalcification and that monomer‐Ca salts are highly soluble. Some results were also compared to those with a bisphosphonic acid‐containing methacrylamide ( 4a ) previously reported; and the influence of monomer structure on polymerization/adhesive properties is discussed. These properties, especially hydrolytic stability and good rates of polymerization, make these new monomers suitable candidates as components of dental adhesive mixtures. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 511–522     

Poly(ether sulfone)s using a rigid dibenzothiophene dioxide heterocycle

Poly(aryl ether)s were prepared by nucleophilic aromatic substitution using conformationally restricted dichloro‐ and difluorodibenzothiophene dioxide heterocyclic monomers with bisphenol A or bisphenol AF. The heterocyclic monomers were prepared from the bis(4‐halophenyl) sulfones in two steps via lithiation followed by copper catalyzed intramolecular coupling and characterized by ¹H, ¹³C, ¹⁹F NMR spectroscopy and GC/MS. Reactivity of the fluorine containing monomer was examined using semi‐empirical methods and NMR spectroscopy measurements and found to be potentially more reactive than bis(4‐fluorophenyl) sulfone, even with a conformationally locked sulfone as the electron withdrawing group. Successful polymerizations of both the fluorine and chlorine containing monomers with bisphenol A and bisphenol AF nucleophiles were accomplished, providing polymers with number average molecular weights of approximately 45 kg/mol (difluoro monomer) and 10–20 kg/mol (dichloro monomer). The polymers exhibited high T_gs ranging from 238 to 256 °C and displayed good thermal stability with 5% degradation temperatures in air from 453–510 °C, depending on molecular weight and bisphenol composition. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3127–3131     

Facile synthesis and characterization of hyperbranched poly(ether amide)s generated from Michael addition polymerization of in situ created AB2 monomers

A new straightforward strategy for synthesis of novel hyperbranched poly (ether amide)s from readily available monomers has been developed. By optimizing the reaction conditions, the AB₂‐type monomers were formed dominantly during the initial reaction stage. Without any purification, the AB₂ intermediate was subjected to further polymerization in the presence (or absence) of an initiator, to prepare the hyperbranched polymer‐bearing multihydroxyl end‐groups. The influence of monomer, initiator, and solvent on polymerization and the molecular weight (MW) of the resultant polymers was studied thoroughly. The MALDI–TOF MS of the polymers indicated that the polymerization proceeded in the proposed way. Analyses of ¹H NMR and ¹³C NMR spectra revealed the branched structures of the polymers obtained. These polymers exhibit high‐moderate MWs and broad MW distributions determined by gel permeation chromatography (GPC) in combination with triple detectors, including refractive index, light scattering, and viscosity detectors. In addition, the examination of the solution behavior of these polymers showed that the values of intrinsic viscosity [η] and the Mark–Houwink exponent α were remarkably lower compared with their linear analogs, because of their branched nature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4309–4321, 2007     

Transition metal compatibilization of poly(vinylamine) and poly(ethylene imine)

Poly(vinylamine), PVA, complexes with cobalt chloride hexahydrate exhibit a 45 °C enhancement in the glass‐transition temperature per mol % of the d‐block metal cation. Poly(ethylene imine), PEI, complexes with CoCl₂(H₂O)₆ exhibit a 20 °C enhancement in T_g per mol % Co²⁺. Since the basicities of primary and secondary amines are comparable (i.e., pK_b,PVA ≈ 3.34 vs. pK_b,PEI ≈ 3.27) and the rates at which each polymeric ligand displaces waters of hydration in the coordination sphere of Co²⁺ are similar, transition metal compatibilization is operative in blends of both polymers with CoCl₂(H₂O)₆. These two polymers are immiscible in the absence of the inorganic component. Infrared spectroscopy suggests that nitrogen lone pairs in PVA and PEI coordinate to Co²⁺. The stress–strain response of a 75/25 blend of PVA and PEI with 2 mol % Co²⁺ reveals a decrease in elastic modulus from 4.4 × 10⁹ N/m² to 5.7 × 10⁷ N/m², a decrease in fracture stress from 3.7 × 10⁷ N/m² to 2.0 × 10⁶ N/m², and an increase in ultimate strain from 1.3 to 12% relative to the 75/25 immiscible polymer–polymer blend. A plausible explanation for this effect is based on the fact that cobalt chloride hexahydrate compatibilizes both polymers by forming a coordination bridge between nitrogen lone pairs in dissimilar chains. Hence, poly(ethylene imine), which is very weak with a T_g near −40 °C, is integrated into a homogeneous structure with poly(vinylamine) and the mechanical properties of the individual polymers are averaged in the compatibilized ternary complex. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 552–561, 2000     

On the liquid-crystalline properties of methacrylic polymers containing 4′-(4-alkyloxyphenyl)azobenzene mesogens

In this article, we report on the synthesis and thermotropic behaviour of methacrylic polymers containing 4′-(4-alkyloxyphenyl)azobenzene mesogens attached to the backbone through n-alkyloxy spacers of 6 or 10 methylene groups. Polymerisations were carried out via free radicals using azobisisobutyronitrile (AIBN) as initiator. Chemical structures of polymers and their precursors were characterised by ¹H NMR spectroscopy. Thermogravimetric analysis showed that azopolymers are thermally stable up to temperatures around 300°C. The thermotropic liquid-crystalline (LC) behaviour was studied by differential scanning calorimetry (DSC), polarized optical microscopy (POM) and X-ray diffraction (XRD). Results indicate that all synthesised mesogens, monomers and polymers developed two or more orthogonal LC phases in wide temperature ranges. Mesogens and monomers developed nematic and smectic phases, whereas polymers exhibited only smectic phase. In polymers, the arrangement of mesogens depends on the relative length of the spacer and the terminal flexible chain; two distinct structural models were proposed based on chemical interactions and steric constrains. The trans–cis photoisomerisation of monomers and polymers in solution was also studied. High cis-isomer contents (>80%) were reached in relative short irradiation times despite the steric constrains imposed by the polymer backbone.     

Synthesis of aromatic poly(ether amide amide ether ketone ketone)s by electrophilic Friedel–Crafts solution polycondensation

A new monomer, N,N′‐bis(4‐phenoxybenzoyl)‐p‐phenylenediamine (BPBPPD), was prepared by the condensation of p‐phenylenediamine with 4‐phenoxybenzoyl chloride in N,N‐dimethylacetamide (DMAc). Novel aromatic poly(ether amide amide ether ketone ketone)s (PEAAEKKs) were synthesized by electrophilic Friedel–Crafts solution copolycondensation of BPBPPD with a mixture of terephthaloyl chloride (TPC) and isophthaloyl chloride (IPC), over a wide range of TPC/IPC molar ratios, in the presence of anhydrous aluminum chloride and N‐methylpyrrolidone (NMP) in 1,2‐dichloroethane (DCE). The influences of reaction conditions on the preparation of polymers were examined. The polymers obtained were characterized by different physico–chemical techniques such as FT‐IR, Differential scanning calorimetry (DSC), Thermogravimetric analysis (TGA), and wide angle X‐ray diffraction (WAXD). The polymers with 70–100 mol% IPC are semicrystalline and have remarkably increased T_gs over commercially available poly(ether ether ketone) (PEEK) and poly(ether ketone ketone) (PEKK) due to the incorporation of amide groups in the main chain. The polymers with 70–80 mol% IPC had not only high T_gs of 209–213°C, but also moderate T_ms of 339–348°C, which are suitable for melt processing. The polymers with 70–80 mol% IPC had tensile strengths of 107.5–109.8 MPa, Young's moduli of 2.53–2.69 GPa, and elongations at break of 9–11% and exhibited high thermal stability and good resistance to organic solvents. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and characterization of blue‐light emissive carbazole containing perfluorocyclobutyl arylene ether polymers

A series of N‐alkyl/aryl carbazole 3,6‐substituted arylene trifluorovinyl ether (TFVE) monomers were synthesized in high purity and yield from a concise four‐step synthesis using carbazole as a starting material. Condensate‐free, step‐growth chain extension of the monomers afforded perfluorocyclobutyl (PFCB) arylene ether homo‐ and copolymers as solution processable, optically transparent blue‐light emissive materials. Arylene TFVE monomers and conversion to PFCB arylene ether polymers were structurally elucidated and purity confirmed by high resolution mass spectroscopy, NMR (¹H, ¹³C, and ¹⁹F) spectroscopy, gel permeation chromatography, and attenuated total reflectance Fourier transform infrared analysis. Thermal analysis by differential scanning calorimetry and thermogravimetric analysis revealed glass transition temperatures >150 °C and onset of decomposition in nitrogen >410 °C with 40 wt % char yield up to 900 °C. Optical and electrochemical studies included solution (tetrahydrofuran) and solid state (spin cast thin film) UV–vis/fluorescence spectroscopy and cyclic voltammetry which showed structure dependence of these blue emissive systems on the nature of the N‐alkyl/aryl carbazole substitution in either homo‐ or copolymer configurations. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 552–560     

Studies on synthesis and in vitro biodegradability of novel optically active nanostructure poly(ester-imide)s containing <Emphasis Type="SmallCaps">l</Emphasis>-phenylalanine and <Emphasis Type="SmallCaps">l</Emphasis>-isoleucine linkages

A series of biodegradable functional amino-acid-based poly(ester-imide)s (PEI)s were designed and synthesized by the direct polycondensation reaction of chiral diacids composed of naturally occurring α-amino acids with 4,4′-thiobis(2-tert-butyl-5-methylphenol) in the presence of tosyl chloride, pyridine, and N,N-dimethylformamide as a condensing agent. These new chiral polymers were characterized with respect to chemical structure and purity using specific rotation experiments, FT-IR, ¹H-NMR, techniques, and elemental analysis. The surface morphology of these polymers was investigated by field emission scanning electron microscopy. The result indicated nanoscale morphology of the obtained polymers. Thermal stability and the weight loss behavior of the resulting PEIs were studied by TGA techniques. All PEIs showed no significant weight loss below 400 °C in a N₂ environment. The monomers and prepared polymers were co-cultivated with airborne fungal spores in culture media to study their biological activity. Soil burial test was also used for evaluation of their biodegradation behavior. The results showed that the synthesized monomers and their derived polymers are biologically active and that their degradation products are probably nontoxic to microbial growth.     

Polymerization of Si-containing acetylenes. XIV. Polymerization of diphenylacetylenes with bulky silyl groups and polymer properties

Polymerization and polymer properties of diphenylacetylenes with bulky silyl groups (SiMe₂–i-Pr, SiMe₂–t-Bu, SiMe₂Ph, SiEt₃) at para or meta position were studied under comparison with those of the SiMe₃ derivatives. The present monomers polymerized in good yields with TaCl₅-cocatalysts to form high molecular-weight polymers (M _w > 4 × 10⁵). The polymer yields of para-substituted monomers were similar to that of the SiMe₃ derivative, while those of meta substituted monomers were lower than that of m-SiMe₃ derivative. Most of the polymers were totally soluble in common solvents such as toluene and CHCl₃, although the polymers with p-SiMe₂–t-Bu and p-SiMe₂Ph groups were partly insoluble in all solvents. These polymers resembled SiMe₃-containing homologues in the UV-visible absorption and thermal stability. The oxygen permeability coefficients of these polymers were in the range of 10^?9?10^?8 cm³ (STP) cm/(cm²·s cm Hg)—lower than those of the corresponding SiMe₃-containing polymers. © 1993 John Wiley & Sons, Inc.     

Poly(arylene ether)s from new biphenols containing imidoarylene and dicyanoarylene moieties

Novel poly(arylene ether)s were synthesized from new biphenol monomers 14–16 1 containing imido‐ or dicyanoarylene groups. The syntheses of these polymers were carried out in tetramethylene sulfone in the presence of anhydrous K₂CO_3, by a nucleophilic substitution condensation between the biphenol and activated difluoro compounds to give high molecular weight polymers. All the polymers have high T_g 's and good thermal stability as determined from DSC and TGA analysis. Inherent viscosities of these polymers are in the range of 0.33–0.63 dL/g. They are amorphous and readily soluble in NMP, DMF, and DMSO. The glass‐transition temperatures of the polymers range from 248–295 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1318–1322, 2000     

Poly(phenyl methacrylate) and poly(1‐naphthyl methacrylate) prepared in microemulsions

Phenyl methacrylate and 1‐naphthyl methacrylate were polymerized in microemulsions using stearyltrimethylammonium chloride, cetyltrimethylammonium bromide, and a mixture of nonionic Triton surfactants to form latexes that were 20–30 nm in diameter. A temperature of 70 °C was needed to obtain polymers using thermal initiation. The tacticities of poly(phenyl methacrylate) (PPhMA) (55% rr) and poly(1‐naphthyl methacrylate) (P‐1‐NM) (47% rr) were the same as those of the polymers prepared in toluene solutions. The weight average molecular weights were 1 × 10⁶ and 5 × 10⁵ g/mol for PPhMA and P‐1‐NM prepared in microemulsions with very broad distributions. PPhMA samples from microemulsions and solution had the same T_g = 127 °C. P‐1‐NM from microemulsions had T_g = 145–147 °C compared with T_g = 142 °C for P‐1‐NM from solution. The molecular weights and the glass‐transition temperatures of both PPhMA and P‐1‐NM from microemulsions are substantially higher than any previously reported. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 519–524, 2001     

Synthesis and characterization of poly(aryl amide imide)s derived from diphenyltrimellitic anhydride

The synthesis and characterization of a series of novel poly(aryl amide imide)s based on diphenyltrimellitic anhydride are described. The poly(aryl amide imide)s, having inherent viscosities of 0.39–1.43 dL/g in N-methyl-2-pyrrolidinone at 30°C, were prepared by polymerization with aromatic diamines in N,N-dimethylacetamide and subsequent chemical imidization. All the polymers were amorphous, readily soluble in aprotic polar solvents such as DMAC, NMP, dimethylsulfoxide, N,N-dimethylformamide, and m-cresol, and could be cast to form flexible and tough films. The glass transition temperatures were in the range of 284–366°C, and the temperatures for 5% weight loss in nitrogen were above 468°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4541–4545, 1999     

Alkyl-substituted poly(2,5-benzophenone)s synthesized via Ni(0)-catalyzed coupling of aromatic dichlorides and their miscible blends

High molecular weight poly(2,5-benzophenone) derivatives were prepared by Ni(0)-catalyzed coupling of 4′-substituted 2,5-dichlorobenzophenones. Monomers were synthesized by the Friedel–Crafts reaction of 2,5-dichlorobenzoyl chloride and alkyl-substituted benzenes in the presence of aluminum chloride. The resulting polymers are soluble and show no evidence of crystallinity by DSC. Number average molecular weights are in the range of 9.2 × 10³–11.7 × 10³ g/mol by multiple angle laser light scattering (MALLS). Molecular weights obtained by MALLS are only slightly lower (∼90%) than those obtained by GPC (polystyrene standards). These polymers exhibit high thermal stability with glass transition temperatures ranging from 173 to 225°C and weight loss occurring above 450°C in nitrogen and 430°C in air. Additionally, the polymers were blended and the resulting polymer films appear to be miscible by DSC results. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2611–2618, 1998     

Preparation of poly(phenylene vinylene) from cycloalkylene sulfonium salt monomers and polymers

Two new types of p-xylene bis-sulfonium chloride monomers were prepared from cycloalkylene sulfides. The polymerization characteristics of these monomers to form poly(p-xylene sulfonium chlorides), and the thermal elimination reactions of their polymers to poly(p-phenylene vinylene), were compared with those of two monomers prepared from dialkyl sulfides. The cycloalkylene sulfonium chloride monomer polymerized to higher yields and to higher molecular weight polymers, which showed more efficient elimination reactions.