Hydrothermal synthesis and optical characteristics of Eu in Zn2SnO4 nanocrystals

Zn₂SnO₄:Eu³⁺ nanocrystals were one-step synthesized by hydrothermal method for the first time. All the products were systematically characterized by powder X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), electron probe X-ray microanalyzer (EPMA), photoluminescence (PL) and photoluminescent excitation (PLE). The characteristic peak of Eu³⁺-doped in Zn₂SnO₄ nanocrystals was also detected. The luminescent properties of blank and Eu³⁺-doped Zn₂SnO₄ nanocrystals were reported.     

High luminance of new green emitting phosphor, Mg2SnO4:Mn

Mg₂SnO₄, which has an inverse spinel structure, was adopted as the host material of a new green emitting phosphor. Luminescence properties of the manganese-doped magnesium tin oxide prepared by the solid state reaction were investigated under vacuum ultraviolet (VUV) ray and low-voltage electron excitation. The Mg₂SnO₄:Mn phosphor exhibited green luminescence with the emission spectrum centered at 500 nm due to spin flip transition of the d-orbital electron associated with the Mn²⁺ ion. Optimum Mn concentration of Mg₂SnO₄:Mn under VUV excitation with 147 nm wavelength and electron beam excitation with 800 V excitation voltage are 0.25 and 0.6 mol%, respectively. The emission intensities of Mg₂SnO₄:Mn phosphors under the two excitation sources are higher than those of Zn₂SiO₄:Mn and ZnGa₂O₄:Mn phosphors. At 0.25 mol% of Mn concentration, on the other hand, the decay time is shorter than 10 ms.     

Effect of SnO2 coating on the magnetic properties of nanocrystalline CuFe2O4

Nanocrystalline CuFe₂O₄ and CuFe₂O₄/xSnO₂ nanocomposites (x=0, 1, 5 wt%) have been successfully synthesized by one-pot reaction of urea-nitrate combustion method. The transmission electron microscope study reveals that the particle size of the as synthesized CuFe₂O₄ and CuFe₂O₄/5 wt%SnO₂ are 10 and 20 nm, respectively. The SnO₂ coating on the nanocrystalline CuFe₂O₄ was confirmed from HRTEM studies. The resultant products were sintered at 1100 °C and characterized by XRD and SQUID for compound formation and magnetic studies, respectively. The X-ray diffraction pattern shows the well-defined sharp peak that confirms the phase pure compound formation of tetragonal CuFe₂O₄. The zero field cooled (ZFC) and field cooled (FC) magnetization was performed using SQUID magnetometer from 2 to 350 K and the magnetic hysteresis measurement was carried out to study the magnetic properties of nanocomposites.     

Synthesis, structure, and photoluminescence of Zn2SnO4 single-crystal nanobelts and nanorings

A large quantity of single-crystal Zn₂SnO₄ (ZTO) nanobelts is synthesized by using a thermal evaporation method. The lengths of the nanobelts are up to several hundreds of micrometers, and the average width and thickness are about 400 and 30 nm, respectively. Some ring-like nanobelts, called nanorings here, are also observed. The nanobelts are characterized in detail with scanning electron microscope, X-ray powder diffraction, transmission electron microscope, high-resolution transmission electron microscope and selected area electron diffraction. Possible growth mechanisms for the ZTO nanobelts and nanorings are proposed. In addition, the photoluminescence spectrum (PL) of the nanobelts at room temperature shows a stable broad blue-green emission around the 400-600 nm wavelengths with a maximum center at 490 nm. The strong PL emission of the nanobelts may find potential applications in nano-scale optoelectronic devices.     

Hydrothermal synthesis and structural characterization of (1−x)α-Fe2O3-xSnO2 nanoparticles

Structural and morphological characteristics of (1−x)α-Fe₂O₃-xSnO₂ (x=0.0-1.0) nanoparticles obtained under hydrothermal conditions have been investigated by X-ray diffraction (XRD), transmission Mössbauer spectroscopy, scanning and transmission electron microscopy as well as energy dispersive X-ray analysis. On the basis of the Rietveld structure refinements of the XRD spectra at low tin concentrations, it was found that Sn⁴⁺ ions partially substitute for Fe³⁺ at the octahedral sites and also occupy the interstitial octahedral sites which are vacant in α-Fe₂O₃ corundum structure. A phase separation of α-Fe₂O₃ and SnO₂ was observed for x≥0.4: the α-Fe₂O₃ structure containing tin decreases simultaneously with the increase of the SnO₂ phase containing substitutional iron ions. The mean particle dimension decreases from 70 to 6 nm, as the molar fraction x increases up to x=1.0. The estimated solubility limits in the nanoparticle system (1−x)α-Fe₂O₃-xSnO₂ synthesized under hydrothermal conditions are: x≤0.2 for Sn⁴⁺ in α-Fe₂O₃ and x≥0.7 for Fe³⁺ in SnO₂.     

Porous SnO2 nanoflakes with loose-packed structure: Morphology conserved transformation from SnS2 precursor and application in lithium ion batteries and gas sensors

Porous SnO₂ nanoflakes with loose-packed structure were synthesized by calcination of SnS₂ precursors that were obtained through solvothermal method at low temperature. The as-obtained SnO₂ product had a three-dimensional porous structure with relatively high specific surface area. It was found that the SnO₂ nanoflakes inherited the morphology of precursor while numerous pores were formed after the annealing process. The combined techniques of X-ray diffraction, energy-dispersive spectrum, field emission scanning electron microscopy, and (high-resolution) transmission electron microscopy were used for characterization of the as-prepared SnO₂ product. Moreover, the porous SnO₂ nanoflakes with loose-packed structure could be used as gas sensors for detecting ethanol and acted as anode for lithium ion batteries. Our study shows that the as-prepared SnO₂ nanoflakes not only exhibit good response and reversibility to ethanol gas but also display enhanced Li-ion storage capability.     

Surface and transport studies on La0.7Ba0.3MnO3:SnO2 bilayer

We report on study of morphology, optical contrast and transport characteristics of La_0.7Ba_0.3MnO₃ (LBMO) manganite thin films bilayered with SnO₂ on Si (0 0 1) substrate, synthesized using pulsed laser deposition system. X-ray diffraction study reveals that both LBMO and SnO₂ show polycrystalline growth over the substrate. Atomic force microscopy shows interesting pyramidal structures of LBMO of size ∼2 μm × 1 μm × 0.1 μm. On the other hand, SnO₂ grows in the form of close packed cylindrical clusters of ∼200 nm radius. Near-field optical microscopy (NSOM) study using 532 nm laser reveal that optical NSOM output intensity in LBMO is four times less than SnO₂ signal. Transport characterizations show that this bilayer configuration exhibit non-linear current-voltage characteristics from 300 upto 50 K. The nature becomes linear below this temperature. The results project the system as a promising candidate in non-conventional device category in the area of spintronics.     

Controlled synthesis and relationship between luminescent properties and shape/crystal structure of Zn2SiO4:MN phosphor

Mn-doped Zn₂SiO₄ phosphors with different morphology and crystal structure, which show different luminescence and photoluminescence intensity, were synthesized via a low-temperature hydrothermal route without further calcining treatment. As-synthesized zinc silicate nanostructures show green or yellow luminescence depending on their different crystal structure obtained under different preparation conditions. The yellow peak occurring at 575 nm comes from the β-phase zinc silicate, while the green peak centering at 525 nm results from the usual α-phase zinc silicate. From photoluminescence spectra, it is found that Zn₂SiO₄ nanorods have higher photoluminescence intensity than Zn₂SiO₄ nanoparticles. It can be ascribed to reduced surface-damaged region and high crystallinity of nanorods.     

Field emission from patterned SnO2 nanostructures

A simple and reliable method has been developed for synthesizing finely patterned tin dioxide (SnO₂) nanostructure arrays on silicon substrates. A patterned Au catalyst film was prepared on the silicon wafer by radio frequency (RF) magnetron sputtering and photolithographic patterning processes. The patterned SnO₂ nanostructures arrays, a unit area is of ∼500 μm × 200 μm, were synthesized via vapor phase transport method. The surface morphology and composition of the as-synthesized SnO₂ nanostructures were characterized by means of scanning electron microscopy (SEM) and X-ray diffraction (XRD). The mechanism of formation of SnO₂ nanostructures was also discussed. The measurement of field emission (FE) revealed that the as-synthesized SnO₂ nanorods, nanowires and nanoparticles arrays have a lower turn-on field of 2.6, 3.2 and 3.9 V/μm, respectively, at the current density of 0.1 μA/cm². This approach must have a wide variety of applications such as fabrications of micro-optical components and micropatterned oxide thin films used in FE-based flat panel displays, sensor arrays and so on.     

Synthesis and thermal stability of Zn3N2 powder

This paper reports that Zn₃N₂ powder of high quality has been synthesized by a nitridation reaction of Zn powder with NH₃ gas (flow rate 500 ml/min) at the nitridation temperature of 600 °C for 120 min. X-ray diffraction indicates that Zn₃N₂ is cubic in structure with the lattice constant being a=9.788 Å. X-ray photoelectron spectroscopy shows the differences of chemical bonding states between Zn₃N₂ and ZnO, and confirms the formation of N-Zn bonds. Thermal gravimetric analysis and differential thermal analysis are employed to investigate the thermal decomposition behavior of Zn₃N₂ powder. It is found that Zn₃N₂ is unstable when exposed to open air above 500 °C.     

Synthesis and characterization of the SnO2-pillared layered titanate nanohybrid

SnO₂-pillared titanate nanohybrid has been prepared by reacting the exfoliated layered titanate sheets with the nanosized SnO₂ sol particles. The stable two-dimensional colloidal nanosheets could be obtained by intercalating tetrabutylammonium cation into the layered protonic titanate, H_xTi_2−x/4□_x/4O₄·H₂O (x=0.67) with a lepidocrocite-like structure, and by successive exfoliation process in an aqueous solution. Monodispersed SnO₂ nano sol particles were prepared by hydrolysis of SnCl₄·5H₂O in the presence of sodium hydroxide, and then the exfoliated titanate suspension was mixed with SnO₂ nano sol solution until the flocculated products formed. The final product was heated at various temperatures in order to complete the grafting reaction of intercalated SnO₂ nano sol on the interlayer surface of layered titanate. Inductive coupled plasma, X-ray diffraction, thermal analysis and N₂-adsorption-desorption isotherms were carried out to study the hybridizing process and the structure of SnO₂-pillared titanate nanohybrid.     

Synthesis and VUV spectral properties of nanoscaled Zn2SiO4:Mn green phosphor

Nanoscaled Zn₂SiO₄:Mn²⁺ green phosphor with regular and uniform morphology was synthesized by hydrothermal method at a low temperature of 140 °C. The structure and morphology of the phosphor was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The effects of the hydrothermal temperature and the time on the crystallite structure and the vacuum ultraviolet (VUV) photoluminescence (PL) properties were evaluated. The as-synthesized nanoscaled Zn₂SiO₄:Mn²⁺ phosphor exhibited intensive broad emission around 523 nm, which was attributed to the ⁴T₁→⁶A₁ transition of Mn²⁺. The PL intensity increased along with the increasing hydrothermal temperature and time. The heat-treated phosphors exhibited higher PL intensity than the corresponding samples prepared using the conventional solid-state reaction.     

SnO2 / In2O3 one-dimensional nano-core-shell structures: Synthesis, characterization and photoluminescence properties

SnO₂/In₂O₃ one-dimensional nano-core-shell structures have been synthesized at 1350 ^°C by thermal evaporation of the mixture of metal Sn, Fe(NO₃)₃ powders and In particles. The as-synthesized products have been characterized by energy-dispersive X-ray spectroscopy, selected-area electron diffraction and high-resolution transmission electron microscopy. Microstructure characterization indicates the orientation relationship between core and shell is , . The formation mechanism of this nano-core-shell structure can be attributed to the cover of In₂O₃ on the surface of SnO₂ nanochains. The photoluminescence properties of the nano-core-shell structures have been measured. The PL spectrum shows some difference with the result from pure SnO₂ and In₂O₃ nanostructure that be deemed to relate to interface defects in SnO₂/In₂O₃ nano-core-shell structure.     

Solvothermal one-step synthesis of MWCNTs/Ni0.5Zn0.5Fe2O4 magnetic composites

A magnetic multi-walled carbon nanotubes-based (MWCNTs-based) composite, MWCNTs/Ni_0.5Zn_0.5Fe₂O₄, was synthesized via a facile solvothermal approach. The composites were characterized by X-ray diffraction analysis, transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and vibrating sample magnetometry. The results confirmed that MWCNTs and Ni_0.5Zn_0.5Fe₂O₄ coexisted in the composites. The TEM and HRTEM results showed a thick layer of Ni_0.5Zn_0.5Fe₂O₄ was intimately connected to the surface of MWCNTs. The saturation magnetization value of the composites was 45.8 emu/g. Furthermore, the probable synthesis mechanism of the magnetic composites was also investigated based on the experimental results.     

Effects of SnO2 addition on the magnetic properties of manganese zinc ferrites

SnO₂ was added to high-permeability MnZn ferrites and MnZn ferrites for high-frequency power supplies. The effects of the SnO₂ addition were studied. Sn⁴⁺ ions can dissolve into the spinel lattice and form stable Fe²⁺–Sn⁴⁺ pairs and hence can compensate the magneto-crystalline anisotropy constant K₁ and improve the initial permeability effectively. The initial permeability of ferrites is also improved as abnormal grain growth caused by ion vacancy is controlled with SnO₂ doping. In addition, the SnO₂ doping also leads to a decrease in the relative loss factor and an increase in density. The power loss and minimum power loss temperature decrease with SnO₂ doping.     

Structural, AC, and DC magnetic properties of Zn1−xCoxFe2O4

Structural, AC and DC magnetic properties of polycrystalline Zn_1−xCo_xFe₂O₄ (x=0.2, 0.4) samples sintered at various temperatures (1100-1300 °C), and various dwell times (0.2-15 h) have been investigated thoroughly. The bulk density of the Zn_0.60Co_0.40Fe₂O₄ samples increases as the sintering temperature (T_s) increases from 1100 to 1250 °C, and above 1250 °C the bulk density decreases slightly. The Zn_0.80Co_0.20Fe₂O₄ samples show similar behavior of changes to that of Zn_0.60Co_0.40Fe₂O₄ samples except that the bulk density is found to be highest at 1200 °C. The DC magnetization as a function of temperature curves show that the Zn_0.60Co_0.40Fe₂O₄ sample is ferrimagnetic at room temperature while the Zn_0.80Co_0.20Fe₂O₄ sample is paramagnetic at room temperature. The T_c of Zn_0.80Co_0.20Fe₂O₄ sample is found to be 170 K from DC magnetization measurement. Separate measurement (AC magnetization), initial permeability as a function of temperature shows that the T_c of the Zn_0.60Co_0.40Fe₂O₄ sample is 353 K. Slight variation of T_c is observed depending on sintering condition. The initial permeability for the Zn_0.60Co_0.40Fe₂O₄ composition sintered at 1250 °C is found to be maximum.     

The structure and magnetic properties of Zn1−xNixFe2O4 ferrite nanoparticles prepared by sol–gel auto-combustion

Zn_1−xNi_xFe₂O₄ ferrite nanoparticles were prepared by sol–gel auto-combustion and then annealed at 700 °C for 4 h. The results of differential thermal analysis indicate that the thermal decomposition temperature is about 210 °C and Ni–Zn ferrite nanoparticles could be synthesized in the self-propagating combustion process. The microstructure and magnetic properties were investigated by means of X-ray diffraction, scanning electron microscope, and Vibrating sample magnetometer. It is observed that all the spherical nanoparticles with an average grain size of about 35 nm are of pure spinel cubic structure. The crystal lattice constant declines gradually with increasing x from 0.8435 nm (x=0.20) to 0.8352 nm (x=1.00). Different from the composition of Zn_0.5Ni_0.5Fe₂O₄ for the bulk, the maximum M_s is found in the composition of Zn_0.3Ni_0.7Fe₂O₄ for nanoparticles. The H_c of samples is much larger than the bulk ferrites and increases with the enlarging x. The results of Zn_0.3Ni_0.7Fe₂O₄ annealed at different temperatures indicate that the maximum M_s (83.2 emu/g) appears in the sample annealed at 900 °C. The H_c of Zn_0.3Ni_0.7Fe₂O₄ firstly increases slightly as the grain size increases, and presents a maximum value of 115 Oe when the grains grow up to about 30 nm, and then declines rapidly with the grains further growing. The critical diameter (under the critical diameter, the grain is of single domain) of Zn_0.3Ni_0.7Fe₂O₄ nanoparticles is found to be about 30 nm.     

Low-temperature sintering and microwave dielectric properties of Ca2Zn4Ti15O36 ceramics

The sintering behavior, microstructures, and microwave dielectric properties of Ca₂Zn₄Ti₁₅O₃₆ ceramics with B₂O₃ addition were investigated. The crystalline phases and microstructures of Ca₂Zn₄Ti₁₅O₃₆ ceramics with 0-10 wt% B₂O₃ addition were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). The sintering temperature of Ca₂Zn₄Ti₁₅O₃₆ ceramic was lowered from 1170 to 930 °C by 10 wt% B₂O₃ addition. Ca₂Zn₄Ti₁₅O₃₆ ceramics with 8 wt% B₂O₃ addition sintered at 990 °C for 2 h exhibited good microwave dielectric properties, i.e., a quality factor (Qf) 11,400 GHz, a relative dielectric constant (ε_r) 41.5, and a temperature coefficient of resonant frequency (τ_f) 94.4 ppm/°C.     

Optical properties of oxide magnetic ZnO, Zn0.95Mn0.05O and Cu2O nanopowders

ZnO, Zn_0.95Mn_0.05O and Cu₂O nanocrystals are synthesized. Excitonic lines in absorption spectra of these materials are detected. In photoluminescence and photoluminescence excitation spectra of Zn_0.95Mn_0.05O the dangling bond hybrid (DBH) state is found. It has splitted out from the top of the valence band due to the hybridization between d-states of the Mn impurity and the p-states of oxygen.     

SnO2/TiO2 mixed oxide particles synthesized in doped premixed H2/O2/Ar flames

SnO₂/TiO₂ mixed oxides with primary particle size ranging between 5 nm d_p 12 nm were synthesized by doping a H₂/O₂/Ar flame with Sn(CH₃)₄ and Ti(OC₃H₇)₄ co-currently. The effects of “flow coordinate,” concentration and flame configurations were investigated with respect to particle size and morphology of the generated mixed oxides. In situ characterization of the mixed oxides was performed using the particle mass spectrometer (PMS), while XRD, TEM, BET and UV–Vis were performed ex situ. Results obtained showed that primary particle size of mixed oxides can be controlled by varying experimental parameters. The mixed oxides have interesting properties compared to those of the pure oxides of TiO₂ and SnO₂, which were also synthesized in flames earlier. Band gap tuning opportunities are possible using mixed oxides.