Xylenol Orange‐Functionalized Halloysite Nanotubes as a Novel Adsorbent for Selective Solid‐phase Extraction and Determination of Trace Noble Elements

A novel method using xylenol orange‐modified halloysite nanotubes as a solid‐phase sorbent has been developed for the simultaneous preconcentration and separation of trace Au(III ) and Pd(II ) prior to their determination by inductively coupled plasma‐atomic emission spectrometry (ICP‐AES ). The experimental effects of pH , the amount of adsorbent, sample flow rate, sample volume, interfering ions, and the elution condition were investigated in detail. Au(III ) and Pd(II ) were retained on the column at pH 3, and eluted with 2.0 mL of 1.0 mol/L HCl + 2% CS (NH₂ )₂ solution. Common interfering ions did not have any impact on the adsorption, separation, and determination. An enrichment factor of 150 was obtained. The maximum adsorption capacities of the adsorbent were 41.63 and 47.82 mg/g for Au(III ) and Pd(II ), respectively, under the optimum conditions. By the definition of IUPAC , the detection limits (3σ ) of this method for Au(III ) and Pd(II ) were 0.31 and 0.27 ng/mL , and the relative standard deviations (RSDs ) were 2.7 and 3.2%, respectively (n = 8). This newly developed method was verified by certified reference materials, and has been successfully applied to the determination of trace Au(III ) and Pd(II ) in mine samples with satisfactory results. It can be confidently predicted that the method can be used for the determination trace Au(III ) and Pd(II ) in other real samples because of its high selectivity, sensitivity, and reproducibility.     

The express simultaneous neutron activation determination of gold,palladium and platinum

The method of express neutron-activation (NA) determination of Au, Pd and Pt has been developed. The method is based on the quantitative isolation of¹⁹⁸Au+¹⁹⁹Au and¹⁰⁹Pd activities by extraction with organic sulfides. The radiation of¹⁰⁹Pd is measured on a thin NaI(Tl) crystal and that of¹⁹⁸Au and¹⁹⁹Au on a Ge(Li) detector. The calculations of interferences from gold have been performed for various neutron fluxes and various cadmium ratios. Some interferences introduced by other competitive nuclear reactions into the determination of Pt by its daughter isotope¹⁹⁹Au are discussed.     

铱(Ⅳ)-高碘酸钾-丁基罗丹明B体系催化光度法测定铱

研究了在磷酸－氯化钠介质中,痕量铱催化高碘酸钾氧化丁基罗丹明Ｂ（ＢＲＢ）褪色反应及其动力学条件,建立了高灵敏、高选择性痕量铱的新方法。测定的缄性范围为０．４￣３２μｇ／Ｌ,检出限为４．０×１０＾－７ｇ／Ｌ。对质量浓度２０μｇ／Ｌ Ｉｒ（Ⅳ）测定的相对标准偏差为３．１２％（ｎ＝１１）,考察了３０多种共存离子的影响,大多数常见元素不干扰,允许１００倍量Ａｕ、Ｐｄ、和６０倍量Ｐｔ、Ａｇ存在。本法已用于某     

Interference-free determination of trace levels of gold and palladium in geological and metallurgical samples by flame atomic absorption spectrometry coupled with a flow injection on-line microcolumn preconcentration and separation system

A simple and highly selective method was developed for the routine determination of trace or ultratrace amounts of gold and palladium in geological and metallurgical samples. The method uses flow injection on-line preconcentration and separation with determination by flame atomic absorption spectrometry. Au and Pd in the sample are adsorbed on a 2-mercaptopyrimidine chemically modified silica gel (MPMSG) packed microcolumn in a 0.50M HCl medium and then eluted with 0.5 or 1.0% thiourea solution. The eluates are introduced into the flame atomic absorption spectrometer directly. With the use of a 0.85 mL microcolumn (about 0.14 g MPMSG packed), the present system tolerated concentrations of common base metal ions up to 25.0 mg/mL and concentrations of anions up to 100.0 mg/mL when Au(III) at 0.100 microg/mL and Pd(II) at 0.200 microg/mL were preconcentrated for 60 s with a sample flow rate of 5.0 mL/min. The limits of detection were 3.1 ng/mL for Au(III) and 6.1 ng/mL for Pd(II) with relative standard deviations of < or = 2.5%. The analytical results obtained by the proposed method for geological and metallurgical samples were in good agreement with the certified values.     

Determination of noble metals in silicate rocks, ores and metallurgical samples by simultaneous multi-element graphite furnace atomic absorption spectrometry with Zeeman background correction

A new method has been developed for rapid determination of mug/g and ng/g amounts of noble metals in silicate rocks, ores and metallurgical samples by attacking with hydrofluoric acid and aqua regia, preconcentration by ion-exchange chromatography and measuring in a simultaneous multi-element graphite furnace atomic absorption spectrometer equipped with a polarized Zeeman background correction device which eliminated interferences from any incompletely separated common elements. The method was tested for Ru, Rh, Pt, Ir, Pd, Ag and Au with three Canadian certified reference materials, and then applied to the determination of ng/g amounts of these elements in four new Canadian candidate reference materials.     

Adsorption von Spuren von Insecticiden aus Wasser an Polyäthylen

Trace elements such as Bi, Cu, Ni, Pb, Ag, Au, and Pd that are present in high-purity cadmium can be enriched, if the cadmium is coated with a thin layer of mercury before dissolution in dilute nitric acid up to a small residue. For determination of the trace elements, the residue is completely dissolved in nitric acid. Bi, Cu, Ni, and Pb are determined after separation of the mercury; Ag, Au, and Pd are determined in the solution containing the mercury. The determination is made by atomic absorption spectroscopy. The following amounts can be determined (in ppm): Cu 0.02; Ag 0.05; Au 0.1; Bi, Ni, Pb, Pd 0.2.     

Preconcentration of metal dithiocarbamate complexes on C18-bonded silica gel for neutron activation analysis

At pH 2, Au, Pd, Pt, U and W form stable pyrrolidine-carbodithioate (PCDT) complexes which can be quantitatively retained by C₁₈-bonded silica gel. Simultaneous determination of the adsorbed metal complexes can be achieved by instrumental neutron activation analysis (INAA). This method allows the determination of Au, Pd, U, and W in natural waters at ng/l levels. For Pt and W, the adsopriton method has an advantage over the solvent extraction technique which generally results in a partial recovery of the PCDT complexes.     

Synthesis of rhodanine-bonded silica gel and its application in the preconcentration and separation of noble metals

A silica gel based sorbent containing rhodanine as functional group (RDSG) was prepared. Its adsorption and separation characteristics for Ag(I), Au(III) and Pd(II) were studied by flow-injection (FI) on-line preconcentration. Influence of different experimental parameters such as acidity, eluent, co-existing ions were investigated. Trace amounts of Ag, Au and Pd could be efficiently adsorbed by rhodanine-bonded silica gel from acidic solution and eluted with thiourea solution. Common co-existing ions exhibited virtually no interference to the preconcentration and determination. The adsorption capacity of RDSG was 0.0352, 0.107 and 0.122 mmol/g for Ag, Au and Pd, respectively. Detection limits of 0.004, 0.022 and 0.019 microg/mL for Ag, Au and Pd, respectively, were achieved with a sampling time of 60 s at a flow rate of 5.0 mL/min. The relative standard deviation were 0.5%, 0.9% and 1.7% for 0.040 microg/mL Ag, 0.200 microg/mL Au and 0.300 microg/mL Pd. The sorption property did not change after 1,000 cycles of sorption-desorption. The contents of Ag and Au in three national certified ore samples and Pd in a secondary nickel alloy, an anode slime and a CoCl2 electrolytic solution were determined. The results showed good agreement with the certified values.     

Synthesis of rhodanine-bonded silica gel and its application in the preconcentration and separation of noble metals

A silica gel based sorbent containing rhodanine as functional group (RDSG) was prepared. Its adsorption and separation characteristics for Ag(I), Au(III) and Pd(II) were studied by flow-injection (FI) on-line preconcentration. Influence of different experimental parameters such as acidity, eluent, co-existing ions were investigated. Trace amounts of Ag, Au and Pd could be efficiently adsorbed by rhodanine-bonded silica gel from acidic solution and eluted with thiourea solution. Common co-existing ions exhibited virtually no interference to the preconcentration and determination. The adsorption capacity of RDSG was 0.0352, 0.107 and 0.122 mmol/g for Ag, Au and Pd, respectively. Detection limits of 0.004, 0.022 and 0.019 μg/mL for Ag, Au and Pd, respectively, were achieved with a sampling time of 60 s at a flow rate of 5.0 mL/min. The relative standard deviation were 0.5%, 0.9% and 1.7% for 0.040 μg/mL Ag, 0.200 μg/mL Au and 0.300 μg/¶mL Pd. The sorption property did not change after 1000 cycles of sorption-desorption. The contents of Ag and Au in three national certified ore samples and Pd in a secondary nickel alloy, an anode slime and a CoCl₂ electrolytic solution were determined. The results showed good agreement with the certified values.     

Application of a macroporous resin containing imidazoline groups to preconcentration and separation of gold, platinum and palladium prior to ICP-AES determination

A new functional resin with a long functional side chain was synthesized by modification of aminated macroporous poly(vinyl chloride) resin with cyanoethylene and ethylenediamine. Traces of Au(III), Pt(IV) and Pd(II) in aqueous solution were quantitatively adsorbed in the acidity range of pH 4 and C(H(+)) 3 M. The rate of equilibration is high; Cu(2+), Fe(3+), Ni(2+), etc. exhibit little interference on the adsorption of the sought noble metals. The saturated adsorption capacities for Au(III), Pt(IV), Pd(II) and Ir(IV) in 2 M HCl were 4.0, 1.57, 2.26, 1.85 mmol g(-1). Adsorbed ions can be quantitatively desorbed by 4% thiourea +0.25 M H(2)SO(4). The resin has good reusability, and can be used for preconcentration and separation of Au(III), Pt(IV) and Pd(II) prior to their determination by ICP-AES with satisfactory results.