溶胶－凝胶法合成（Mg，Ca）O－SiO_2∶Eu~（3＋），Bi~（3＋）发

以Ｍｇ（ＮＯ３）２、Ｃａ（ＮＯ３）２、Ｅｕ（ＮＯ３）３、Ｂｉ（ＮＯ３）３、ＬｉＮＯ３和Ｓｉ（ＯＣ２Ｈ５）４为反应物，采用溶胶－凝胶法，在比较低的温度下，首次合成０．７０１ｍｏＩＭｇＯ－０．１７５ｍｏｌＣａＯ－１．２５ｍｏＩＳｉＯ２∶０．０６ｍｏｌＥｕ（３＋），０．００２ｍｏＩＢｉ（３＋）（加入Ｌｉ＋作为电荷补偿剂）发光体。得到了最佳合成条件。研究了由溶胶向凝胶转变和凝胶向发光晶体的转变过程。探讨了发光体在不同激发波长激发下的发光特性以及在激活剂、敏化剂不同掺杂量下的发光行为。讨论了在（Ｍｇ（ａ）Ｏ－ＳｉＯ２基质中Ｂｉ（３＋）对Ｅｕ（３＋）的能量传递和敏化作用。     

Eu^3＋,Bi^3＋Me2Y8（SiO4）6O2中的发光特性与取代格位

在紫外光激发下，Ｅｕ＾３＋和Ｂｉ＾３＋在Ｍｅ２Ｙ８（ＳｉＯ４）６Ｏ２基质（Ｍｅ＝Ｍｇ，Ｚｎ，Ｃａ，Ｓｒ）中分别发射红光（＾５Ｄ０－＾７Ｆ２）和蓝光（＾３Ｐ１－＾１Ｓ０）．Ｅｕ＾３＋发光的红橙比随着激发波长和Ｍｅ＾２＋的不同而变化。荧光拉曼光谱表明，Ｅｕ＾３＋在四种基质中同时占据了４ｆ格位和６ｈ格位。依据Ｂｉ＾３＋发光的Ｓｔｏｋｅｓ位移推断，当Ｍｅ＝Ｃａ，Ｚｎ时，Ｂｉ＾３＋主要占据４ｆ格位，而当Ｍｅ     

Bi3+敏化的SrSiO3:Eu3+,Bi3+发光体的合成与发光

本文采用高温固相扩散法合成出一种新的发光体ＳｒＳｉＯ３：ｅＵ＾３＾＋，Ｂｉ＾３＾＋。研究了激活剂Ｅｕ＾３＾＋与敏化剂Ｂｉ＾３＾＋浓度变化与发光强度的关系。实验发现，组成为Ｓｒ０．８１７Ｌｉ０．０９１５ＳｉＯ３：Ｅｕ＾３＾＋０．０７５，Ｂｉ＾３＾＋的发光体其发光强度最大。给出了发光体ＳｒＳｉＯ３：Ｅｕ＾３＾＋，ＳｒＳｉＯ３：Ｅｕ＾３＾＋，Ｂｉ＾３＾＋的激发光谱与发光光谱；测定了发光体的Ｘ射线粉...     

PTFE—乙醚柱反相萃取层析连续分离和测定镓（Ⅲ）铟（Ⅲ）的研究

研究了在抗坏血酸存在下的６ｍｏｌ／Ｌ ＨＢｒ介质作流动相，以ＰＴＦＥ（聚四氟乙烯）负载的乙醚作固定相，反相萃取层析使微量Ｇａ（Ⅲ），Ｉｎ（Ⅲ）与Ｆｅ＾３＋、Ｔｌ＾３＋、Ｍｏ＾６＋、Ａｕ＾３＋、Ｔｉ＾４＋、Ｂｉ＾３＋、Ａｌ＾３＋、Ｍｇ＾２＋、Ｃａ＾２＋、Ｎｉ＾２＋、Ｃｏ＾２＋、Ｃｄ＾２＋、Ｚｎ＾２＋、Ｐｂ＾２＋、Ｃｕ＾２＋等多种离子分离。留于柱上的铟、镓分别用ＨＣｌ（４ｍｏｌ／Ｌ）－Ｈ２Ｏ２（３％）     

β—型过渡元素三取代钨锗杂多配合物的合成,表征和催化活性

报道Ａ－β－Ｍ＇ｘＨｙ－［ＧｅＷＯＭ３（Ｈ２Ｏ）３Ｏ３７］．ｎＨ２Ｏ（Ｍ＝Ｃｒ＾３＾＋，Ｃｏ＾２＾＋，Ｎｉ＾２＾＋，Ｃｕ＾２＾＋；Ｍ＇＝Ｂｕ４Ｎ＾＋，Ｋ＾＋）的立体有择合成法制备及红外和远红外光谱，紫外和可见光谱和循环伏安，磁化率和磁矩，ＸＰＳ，ＥＳＲ以及催化活性等研究结果。     

Li2O-Ln2O3-SiO2:Eu3+,Bi3+体系的结构

采用ｓｏｌ－ｇｅｌ法合成了系列发光体Ｌｉ２Ｏ－Ｌｎ２Ｏ３－ＳｉＯ２：Ｅｕ＾３＾＋，Ｂｉ＾３＾＋，并确定了发光体的物相结构。当Ｌｎ＾３＾＋＝Ｙ＾３＾＋和Ｌｎ＾３＾＋＝Ｌａ＾３＾＋时，紫外光激发下Ｅｕ＾３＾＋的发射分别以红光和橙光为主，只存在一种Ｅｕ＾３＾＋发光中心；Ｌｎ＾３＾＋＝Ｇｄ＾３＾＋时，至少存在两种Ｅｕ＾３＾＋发光中心和两种Ｂｉ＾３＾＋发光中心（共掺杂Ｅｕ＾３＾＋，Ｂｉ＾３＾＋的吸收和发射所     

Li_2O－Ln_2O_3－SiO_2：Eu~（3＋），Bi~（3＋）体系的结构

采用ｓｏｌ－ｇｅｌ法合成了系列发光体Ｌｉ２Ｏ－Ｌｎ２Ｏ３－ＳｉＯ２：Ｅｕ３＋，Ｂｉ３＋，并确定了发光体的物相结构．当Ｌｎ３＋＝Ｙ３＋和Ｌｎ３＋＝Ｌａ３＋时，紫外光激发下Ｅｕ３＋的发射分别以红光和橙光为主，只存在一种Ｅｕ３＋发光中心；Ｌｎ３＋＝Ｇｄ３＋时，至少存在两种Ｅｕ３＋发光中心和两种Ｂｉ３＋发光中心（共掺杂Ｅｕ３＋，Ｂｉ３＋），Ｂｉ３＋的吸收和发射所处的能量位置最低，４ｆ格位的Ｂｉ３＋发生了向Ｅｕ３＋的有效能量传递．     

（CeO2）0.7—x（MO）x（La2O3）0.3（M=Mg,Ca,Sr）固体电解质及其性能的…

合成了（ＣｅＯ２）０．７－ｘ（ＭＯ）ｘ（Ｌａ２Ｏ３）０．３（Ｍ－Ｍｇ、Ｃａ、Ｓｒ）固体电解质。对其晶体结构、电导率、ＸＰＳ谱、离子迁移数及制成的燃料电池的Ｖ－Ｉ曲线进行了测定。（ＣｅＯ２）０．７（Ｌａ２Ｏ３）０．３中掺入Ｃａ＾２＋、Ｍｇ＾２＋或Ｓｒ＾２＋，可使电解质的氧离子导电性能改善，从而使制成的燃料电池的开路电压输出功率也得到提高。     

Eu^2＋和Mn^2＋在Sr3MgSi2O8中的光致发光研究

研究了Ｅｕ＾２＋和Ｍｎ＾２＋共激活的Ｓｒ３ＭｇＳｉ２Ｏ８的荧光性质。Ｅｕ＾２＋和Ｍｎ＾２＋在４６０ｎｍ和６９０ｎｍ的发射峰分别由Ｅｕ＾２＋的５ｄ→４ｆ跃迁和Ｍｎ＾２＋的＾４Ｔ１（＾４Ｇ）→＾６Ａ１ｇ（＾６Ｓ）跃迁产生。未观察到单掺杂Ｍｎ＾２＋的Ｓｒ３ＭｇＳｉ２Ｏ８的荧光发射，而掺入Ｅｕ＾２＋后则出现了Ｍｎ＾２＋的６９０ｎｍ光致发光峰，表明Ｅｕ＾２＋对Ｍｎ＾２＋有敏化作用。Ｅｕ＾２＋的荧光寿命也受Ｍ     

在空气中合成MBPO5：Eu^2＋和MBPO5：Yb^2＋（M=Ca,Sr,Ba）荧…

以含ＲＥ２Ｏ３（ＲＥ＝Ｅｕ，Ｙｂ）为起始物，在空气中成功地合成了ＭＢＰＯ５：ＲＥ＾２＋（Ｍ＝Ｃａ，Ｓｒ，Ｂａ；ＲＥ＾２＋＝Ｅｕ＾２＋，Ｙｂ＾２＋）荧光体，测定了它们的激光发发射光谱峰位以及发射半高宽。     

Die Kristallstruktur des W3CoB3 und der dazu isotypen Phasen Mo3CoB3, Mo3NiB3 und W3NiB3

Zusammenfassung Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃ und W₃NiB₃ kristallisieren in einem eigenen Typ (W₃CoB₃-Struktur). Das trigonal prismatische Bauelement [T ₆B]^* ist zu Ketten vereinigt, wobei B₃-Gruppen entstehen. Die Phasen sind vermutlich Bor-reicher als obiger Formel entspricht.

---

The crystal structure of W₃CoB₃ and the isotypic phases Mo₃CoB₃, Mo₃NiB₃, and W₃NiB₃

Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃, and W₃NiB₃ were found to possess a new type of crystal structure (W₃CoB₃-structure type). Trigonal prismatic groups [T ₆B]^* are linked together forming chains in such a way that B₃-groups occur. These borides do probably exist with a larger amount of boron as to compared with the formula.

---

---

Mit 2 Abbildungen     

Synthesis of γγγ-trifluorocarbonyl compounds

γγγ-Trifluorocarbonyl compounds are easily obtained in a good yield by introduction of the 1,1,1-trifluoroethyl moiety (CF₃-CH₂-) on the -methylene group of a ketone.     

K3SbSe3, Rb3SbSe3 und Cs3SbSe3 – Synthese und Kristallstruktur

K₃SbSe₃, Rb₃SbSe₃, and Cs₃SbSe₃ – Synthesis and Crystal Structure The compounds K₃SbSe₃, Rb₃SbSe₃ and Cs₃SbSe₃ were synthesized by heating mixtures of Sb₂O₃ and an alkalicarbonate in a stream of hydrogen saturated by selenium in a temperature range between 750 °C and 800 °C. The compounds crystallize isostructural with Na₃AsS₃. A comparison of atomic distances and bond angles with those of the isostructural arsenic and bismuth compounds shows the effect of lone pairs.     

γ-Nitro-γ-butyrolacton

γ-Nitro-γ-butyrolactone By oxidation of 3-(1-nitro-2-oxocyclohexyl)propanal ( 1 ) with KMnO₄, besides 3-(1′-nitro-2′-oxocyclohexyl)pripionic acid ( 2 ), the complete hydrolysis product 4-oxononanedioic acid ( 4 ) and the oxidized semi-hydrolysis product 5-(2-nitro-5-oxotetrahydro-2-furyl)pentanoic acid ( 3 ) were formed. The crystalline 3 decomposes at r.t. forming 4 and nitrous gases; its structure was established by X-ray determination.     

Freezing the polarization of CH3NH3PbI3 and CH3NH3PbI3-xClx perovskite films

Thin films of methylammonium lead halides, CH₃NH₃PbI₃ and CH₃NH₃PbI_3-xCl_x, were deposited onto symmetrical microstructured electrode arrays of gold or platinum on Si/SiO₂ wafers. Polarization studies were carried out on perovskite films under vacuum in the dark. For poling, a constant voltage was applied to the samples while the temperature was cycled between 295 K and 4 K. The measured current densities depending on the temperature showed distinct characteristics relating strongly to the crystal phase and the dielectric properties of the perovskite films. Voltage sweeps were carried out at different scan rates at specific temperature intervals after poling. The polarization of the films due to the migration of iodide vacancies in direction of the blocking perovskite/metal interface was frozen almost up to room temperature. Charge carriers were only able to cross the blocking barrier and contribute to the current where the ions have accumulated during poling. All J-V curves showed hysteresis: inverted and regular hysteresis at room temperature and below, respectively. Inverted hysteresis originates from the slow accumulation of ions at the blocking barrier, while regular hysteresis arises from a distortion in the adjacent crystals which will be discussed.     

K3BiSe3, Rb3BiSe3 und Cs3BiSe3 – Substitutionsvarianten des Th3P4-Typs

K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃ – Derivatives of the Th₃P₄ Structure Type The compounds K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃ were synthesized by heating mixtures of Bi₂O₃ and the respective alkalicarbonate in a stream of hydrogen saturated by selenium at 850°C. Thin crystals of the compounds appear red in transmitted light. They crystallize isostructural with Na₃AsS₃, space group P2₁3, lattice constants a = 9.771(5) Å, a = 10.161(3) Å, and a = 10.587(5) Å for K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃, respectively. The Na₃AsS₃ structure type is a derivative of the Th₃P₄ structure type.     

Synthesis of some derivatives of 3-amino-3-desoxyerythrose and 3-amino-3-desoxy-D-3-erythrose

The synthesis of derivatives of 3-amino-3-deoxy-L-erythrose by LAH or LAD reduction of the oxime of 1,2-O-isopropylidene α-L -glycero-tetros-3-ulofuranose is described.     

3x-pyrrolizin-3-ones

Condensation of pyrrole-2-dithiocarboxylates with CH acids containing ester groups, in the KOH-DMSO system, was used to prepare previously unknown 1-alkylthio-3H pyrrolizin-3-ones. The latter, treated with secondary amines, are readily converted to the corresponding 1-amino derivatives.     

3-H-pyrrolizin-3-ones

Previously unknown 1-alkylthio-3H-pyrrolizin-3-ones have been obtained by the condensation of pyrrole-2-dithiocarboxylates with CH acids containing ester groupings in the KOH-DMSO system. On treating the products with secondary amines they are readily converted into the corresponding 1-amino derivatives.Irkutsk Branch of the Russian Academy of Sciences, Irkutsk 664033. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 919–924, July, 1996. Original article submitted May 2, 1996.