碳纳米管对羟基磷灰石基复合材料力学性能的影响

将力学性能优良的碳纳米管(CNTs)与羟基磷灰石(HA)生物陶瓷相复合,发展CNTs/HA复合材料来应用于骨组织修复领域,有望解决HA生物陶瓷力学性能的不足。通过3种不同的制备方法,即通过表面活性剂将CNTs分散在HA基体中、通过酸碱中和反应将CNTs与HA共沉淀以及通过体外浸泡在CNTs上矿化生长HA等方法来获得CNTs/HA复合材料。深入研究CNTs的表面结构和分散状态对CNTs/HA复合材料力学性能的影响。结果表明,CNTs的添加改变了HA的脆性,导致复合材料抗压力学性能得到提高。但是,由于复合材料制备方法的不同,导致CNTs在HA基体中的分散状态、表面结构的完整性以及与HA的界面结合情况不同,导致其抗压力学性能不同。其中,通过表面活性剂将CNTs分散在HA基体中而获得复合材料的抗压力学性能表现最好,而CNTs与HA通过共沉淀法所获得复合材料的抗压力学性能表现最差。     

碳纳米管对羟基磷灰石基复合材料力学性能的影响

将力学性能优良的碳纳米管(CNTs)与羟基磷灰石(HA)生物陶瓷相复合,发展CNTs/HA复合材料来应用于骨组织修复领域,有望解决HA生物陶瓷力学性能的不足.通过3种不同的制备方法,即通过表面活性剂将CNTs分散在HA基体中、通过酸碱中和反应将CNTs与HA共沉淀以及通过体外浸泡在CNTs上矿化生长HA等方法来获得CNTs/HA复合材料.深入研究CNTs的表面结构和分散状态对CNTs/HA复合材料力学性能的影响.结果表明,CNTs的添加改变了HA的脆性,导致复合材料抗压力学性能得到提高.但是,由于复合材料制备方法的不同,导致CNTs在HA基体中的分散状态、表面结构的完整性以及与HA的界面结合情况不同,导致其抗压力学性能不同.其中,通过表面活性剂将CNTs分散在HA基体中而获得复合材料的抗压力学性能表现最好,而CNTs与HA通过共沉淀法所获得复合材料的抗压力学性能表现最差.     

聚甲基丙烯酸甲酯改性碳纳米管及其在聚合物中的应用

本文利用引发剂偶氮二异丁腈(AIBN)在碳纳米管(CNTs)表面引发甲基丙烯酸甲酯(MMA)聚合,使CNTS表面接枝聚甲基丙烯酸甲酯(PMMA),提高CNTs与基体的界面粘结力,改善CNTs在基体中的分散状态。通过熔融共混法制备PVDF/CNTs和PVDF/CNTs-PMMA复合材料。结果表明改性后的CNTs在PVDF中的分散更好,PVDF/CNTs复合材料的导电逾渗阈值为0.7 vol%,PVDF/CNTs-PMMA复合材料的导电逾渗阈值为0.28 vol%,降低了60%。这表明通过对填料化学改性是一种降低复合材料逾渗阈值的有效方法。     

基于弱相互作用的石墨化CNT/PMMA复合材料的热电传输性能

从理论上计算了碳纳米管(CNT)与聚甲基丙烯酸甲酯(PMMA)的相互作用及浸润性, 并测试了CNT/PMMA复合材料的电学、热学和光学性能. 发现石墨化CNT/PMMA复合材料具有较好的导热和导电性能, 其渗流阈值在0.8%左右, 当CNT质量分数为3%时, 复合材料的导热系数提高193%. 这种电学及热学性能的提高一方面与石墨化CNTs的规整结构有关, 另一方面与石墨化CNT-PMMA体系的弱相互作用、CNT间的有效接触以及高效的CNT网络输运性能有密切关系. 研究结果表明, 通过调控CNT与聚合物基体的表面性质、相互作用及浸润性, 可以有效地构建优化的CNT输运网络, 获得性能优异的功能复合材料.     

MoO3基纳米复合材料的制备及其电化学性能研究

以MoO3为基体,分别用超声分散法与碳纳米管(CNTs),化学原位聚合法与聚吡咯(PPy)复合,制备了MoO3/CNTs,MoO3/PPy和MoO3/CNTs/PPy纳米复合材料。利用XRD、SEM、TEM对复合材料进行物性表征,在1 mol·dm-3的HCl溶液中对MoO3,MoO3/CNTs,MoO3/PPy和MoO3/CNTs/PPy四个样品进行电化学测试。结果表明,复合材料的比容量均高于MoO3,其中,由于MoO3/PPy特殊的一维核壳结构使其具有较高的比表面积,相比较其他复合材料而言,有更好的电化学活性。该材料的最大比电容为450.8F·g-1。     

热解碳包覆的碳纳米管复合二氧化锰薄膜超级电容器

通过化学气相沉积(CVD)的方法,在碳纳米管(CNT)薄膜及其连接处沉积热解碳(PC)来限制CNTs之间的滑移。通过扫描电镜(SEM)观察发现,热解碳(PC)的沉积使得CNT表面更加平整,且表面的孔洞更加均匀。通过应力应变及亲疏水性测试发现,CNT/PC复合薄膜的拉伸强度增加了200%,水与薄膜的静态接触角由123°减小到78°。其后通过电化学沉积的方法,制备得到CNT/PC/MnO2薄膜电极材料,通过电化学测试得知,在1 mA/cm^2的电流下单电极的比电容为326 mF/cm^2,可以稳定循环10000圈,电容的保持率稳定在100%左右。     

高填充量碳纳米管/丁苯粉末橡胶机械混炼的物理化学机制

将用喷雾干燥法制备的碳纳米管(CNTs)/丁苯粉末橡胶复合材料在开炼机上机械混炼, 考察机械混炼对复合材料常规力学性能的影响, 并对机械混炼对CNTs增强丁苯橡胶复合材料力学性能的影响进行相应的理论研究和机理分析. 结果表明, 与混炼前的复合材料相比, 机械混炼有效地提高了CNTs/丁苯橡胶复合材料的力学性能, 特别是当CNTs加入量较大时, 提高幅度更为显著, 与填充传统补强剂CB复合材料相比, 具有较大的优势. 这是因为机械混炼一方面使CNTs在橡胶基体中获得了更为充分均匀的分散; 另一方面, 混炼过程中产生的自由基以及巨大的剪切力, 使得CNTs与橡胶基体间界面结合如物理吸附、氢键作用、化学结合等得到了进一步增强, 提高了CNTs/丁苯橡胶复合材料的结合橡胶含量, 更好地发挥了CNTs对丁苯橡胶的补强效应, 从而提高了复合材料的拉伸强度和撕裂强度等力学性能. CNTs补强丁苯橡胶复合材料力学性能的机理符合“强键和弱键学说”.     

水促进Co/Mo/Al2O3催化剂上碳纳米管的生长

对水促进Co/Mo/Al2O3催化剂裂解乙烯生长碳纳米管(CNTs)的研究发现,通入体积分数(φ)为0.6％的水蒸汽在1h内可将CNTs的生长倍率从3.7 g·g-1提高至70 g·g-1.水的作用在于恢复被无定形碳包覆的催化剂颗粒的活性,水的加入量由于其积碳(促进同体碳生成)和消碳(去除固体碳)的竞争作用而存在最佳值.不同反应时间下乙烯的转化率与有效催化剂含量的分析表明,在CNTs生长后期,水的催化促进作用减弱.将催化剂的相对活性与CNT聚团的相对密度关联发现,反应后期的CNTs主要在聚团内部缠绕生长,催化剂被包覆失活.拉曼测试与差热热重分析表明,生长阻力导致所得CNTs缺陷增多,CNT聚团密度变化与CNT缺陷间存在对应关系.聚团内外CNTs的生长阻力不同,生长倍率不同,导致产品纯度不均匀.     

聚苯乙炔/碳纳米管复合材料的导电性能研究

本文以无水A lC l3作催化剂合成聚苯乙炔(PPA),用H2SO4对其进行磺化改性,采用其混法制得了PPA/碳纳米管(CNTs)及磺化PPA/CNTs复合材料,对二者的常温电导率及变温电导率进行了测试。结果表明:磺化PPA的电导率较PPA的提高了3个数量级;随着CMTs含量增加,复合材料的电导率升高;PPA/CNTs导电的阈值是3%,达极限电导率(0.04S/m)所需CNTs含量为25%,而磺化PPA/CNTs导电的阈值是2%,达极限电导率所需CNTs(0.14 s/m)含量为25%。并分析了温度变化对复合材料电阻变化的影响因素。     

易分散碳纳米管阵列可控制备及其衍生超级电容器性能

采用浮动催化剂化学气相沉积(FCCVD)的方法制备碳纳米管(CNT)阵列,通过优化温度、注射速率、生长基底等实验条件,得到高度达到3mm的超长CNTs阵列。选用间甲酚为分散剂,实现了CNT阵列的超大浓度分散,最大分散浓度可以达到120 mg/mL,良好的分散性可以使分散体形成紧密团聚的面团状。选用40 mg/mL的浓糊状分散体,用刮涂的方法得到了大面积的CNTs纸,测试了CNTs的电容性能,表现出稳定的电容器性能。     

Ultrahigh Molecular mass Polyethylene/ Carbon Nanotube CompositesCrystallization and melting properties

Ultrahigh molecular mass polyethylene (UHMMPE) is filled with carbon nano-tubes (CNTs) by solution in the presence of maleic anhydride grafted styrene-(ethylene-co-butylene)-styrene copolymer (MA-SEBS) as a compatibilizer. The UHMMPE/CNT composites crystallized from melt were prepared at a cooling rate of 20°C min^-1. The melting and crystallization behaviors of UHMMPE/ CNT composites were investigated by differential scanning calorimetry. The results showed that onset melting temperature (T _m) and degree of crystallinity (X _c) of UHMMPE/CNT composites crystallized from solution are higher than those from melt due to the larger crystalline lamellar thickness. The onset crystallization temperature (T _c) of UHMMPE/CNT composites tends to shift to higher temperature region with increasing CNT content in the composites. Tm and Tc of UHMMPE phase in UHMMPE/CNT composites decrease with the addition of MA-SEBS. Moreover, the crystallization rate of UHMMPE phase in UHMMPE/CNT composite is increased due to the introduction of CNTs. MA-SEBS acts as compatilizer, enhances the dispersion of CNTs in the UHMMPE matrix. Thereby, the crystallization rate of UHMMPE phase in UHMMPE/CNT composite is further increased with the addition of MA-SEBS. This revised version was published online in August 2006 with corrections to the Cover Date.     

低热固相法制备纳米MnO2/CNT超电容复合电极的循环稳定性

为了改善纳米MnO2超级电容器电极的充放电循环稳定性,以Mn(OAc)2·4H2O、NH4HCO3和碳纳米管(CNT)为原料,采用低热固相反应得到前驱体,再经焙烧和酸处理,制备了一系列CNT含量不同的纳米MnO2/CNT复合电极材料,并用X射线衍射(XRD)、透射电镜(TEM)和Brunauer-Emmett-Teller(BET)比表面积测定方法对其进行了表征.XRD分析结果表明,复合材料中的MnO2为纳米γ-MnO2.研究了复合电极在1 mol·L-1 LiOH电解质中的电化学性能,并与不含CNT的纯纳米MnO2电极进行了比较.结果表明,含CNTs为10%(w,质最分数,下同)和20%的MnO2/CNT复合电极的循环稳定性远优于纯纳米MnO2电极的循环稳定性,其中含10%CNTs的MnO2/CNT复合电极不仪具有良好的循环稳定性,而且在1000 mA·g-1高倍率充放电条件下仍具有200 F·g-1的高比电容.     

Electrical and melt rheological characterization of PC and co‐continuous PC/SAN blends filled with CNTs: Relationship between melt‐mixing parameters,filler dispersion,and filler aspect ratio

Electrical and melt rheological properties of melt‐mixed polycarbonate (PC) and co‐continuous PC/poly(styrene–acrylonitrile) (SAN) blends with carbon nanotubes (CNTs) are investigated. Using two sets of mixing parameters, different states of filler dispersion are obtained. With increasing CNT dispersion, an increase in electrical resistivity near the percolation threshold of PC–CNT composites and (PC + CNT)/SAN blends is observed. This suggests that the higher mixing energies required for better dispersion also result in a more severe reduction of the CNT aspect ratio; this effect was proven by CNT length measurements. Melt rheological studies show higher reinforcing effects for composites with worse dispersion. The Eilers equation, describing the melt viscosity as function of filler content, was used to fit the data and to obtain information about an apparent aspect ratio change, which was in accordance with measured CNT length reduction. Such fitting could be also transferred to the blends and serves for a qualitatively based discussion. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 79–88     

A Review Featuring Fabrication,Properties and Applications of Carbon Nanotubes (CNTs) Reinforced Polymer and Epoxy Nanocomposites

Carbon nanotubes (CNTs) have long been recognized as the stiffest and strongest man-made material known to date.In addition,their high electrical conductivity has roused interest in the areas of electrical appliances and communication related applications.However,due to their miniature size,the excellent properties of these nanostructures can only be exploited if they are homogeneously embedded into light-weight matrices as those offered by a whole series of engineering polymers.In order to enhance their chemical affinity to engineering polymer matrices,chemical modification of the graphitic sidewalls and tips is necessary.The mechanical and electrical properties to date of a whole range of nanocomposites of various carbon nanotube contents are also reviewed in this attempt to facilitate progress in this emerging area.Recently,carbonaceous nano-fillers such as graphene and carbon nanotubes (CNTs) play a promising role due to their better structural and functional properties and broad range of applications in every field.Since CNTs usually form stabilized bundles due to van der Waals interactions,they are extremely difficult to disperse and align in a polymer matrix.The biggest issues in the preparation of CNTs reinforced composites reside in efficient dispersion of CNTs into a polymer matrix,the assessment of the dispersion,and the alignment and control of the CNTs in the matrix.An overview of various CNT functionalization methods is given.In particular,CNT functionalization using click chemistry and the preparation of CNT composites employing hyperbranched polymers are stressed as potential techniques to achieve good CNT dispersion.In addition,discussions on mechanical,thermal,electrical,electrochemical and applications ofpolymer/CNT composites are also included.     

Evaluating the effect of addition of nanodiamond on the synergistic effect of graphene-carbon nanotube hybrid on the mechanical properties of epoxy based composites

Addition of carbon nanotubes (CNT) to Graphene (Gr) is seen to have synergistic effect as reinforcement to polymer matrix. This is possible as CNTs inhibit stacking of Gr sheets, thus providing larger surface area nanophase to get bonded with polymer matrix and providing mechanical support through load sharing and crack growth inhibition. However, tube like morphology and high aspect ratio of CNT often lead to entanglement, which restricts their effect in exfoliating Gr. The aim of the present study is to investigate the potential of ND in improving the synergistic effect of Gr-CNT hybrid as a reinforcement to epoxy matrix. This study utilizes the power of ultrasonication technique, which is very simple and scalable, for dispersing and incorporating nanofillers into epoxy matrix. Addition of ND to Gr-CNT epoxy composite improved the tensile strength from ~46% with 0.5 wt% (75Gr:25ND) to ~51% with 0.8 wt% (25Gr:25CNT:50ND) as compared to neat epoxy. While the fracture toughness improved from ~140% with 0.5 wt% (25Gr:75CNT) to 165% with 0.8 wt% (25Gr:50CNT:25ND). Fractured surfaces of composites revealed improved dispersion and strong interfacial interaction with addition of ND to Gr-CNT hybrid. NDs attaches to the surface of Gr inhibit the stacking of Gr sheets by restricting π-π stabilization. NDs also help in bridging the ends of CNTs together into long chains, thereby increasing the aspect ratio of the fiber like reinforcement. This increases the total available surface area of CNTs and Gr, to interact with epoxy matrix, improves the overall efficiency of Gr-CNT hybrid as a reinforcement, resulting into improvement in mechanical properties of the composite structure.     

碳纳米管/聚丙烯腈原液的制备及可纺性

通过原位聚合的方法制备了碳纳米管／聚丙烯腈复合材料原液,并采用湿纺成型工艺制得碳纳米管／聚丙烯腈复合材料纤维。与共混工艺相比较,采用该方法制得的碳纳米管／聚丙烯腈复合材料碳纳米管在聚丙烯腈基中分散均匀,具有较好的可纺性。     

Preparation and properties of natural rubber composites reinforced with pretreated carbon nanotubes

In order to achieve dramatic improvements in the performance of rubber materials, the development of carbon nanotube (CNT)‐reinforced rubber composites was attempted. The CNT/natural rubber (NR) nanocomposite was prepared through solvent mixing on the basis of pretreatment of CNTs. Thermal properties, vulcanization characteristics, and physical and mechanical properties of the CNT/NR nanocomposites were characterized in contrast to the carbon black (CB)/NR composite. Through the addition of the CNTs treated using acid bath followed by ball milling with HRH (hydrated silica, resorcinol, and hexamethylene tetramine) bonding systems, the crystallization melting peak in differential scanning calorimetry (DSC) curves of NR weakened and the curing rate of NR slightly decreased. Meanwhile, the over‐curing reversion of CNT/NR nanocomposites was alleviated. The dispersion of the treated CNTs in the rubber matrix and interfacial bonding between them were rather good. The mechanical properties of the CNT‐reinforced NR showed a considerable increase compared to the neat NR and traditional CB/NR composite. At the same time, the CNT/NR nanocomposites exhibited better rebound resilience and dynamic compression properties. The storage modulus of the CNT/NR nanocomposites greatly exceeds that of neat NR and CB/NR composites under all temperature regions. The thermal stability of NR was also obviously improved with the addition of the treated CNTs. Copyright © 2008 John Wiley & Sons, Ltd.     

Poly(methyl methacrylate)-induced Microstructure and Hydrolysis Behavior Changes of Poly(L-lactic acid)/Carbon Nanotubes Composites

Poly(L-lactic acid)(PLLA)-based composites exhibit wide applications in many fields.However,most of hydrophilic fillers usually accelerate the hydrolytic degradation of PLLA,which is unfavorable for the prolonging of the service life of the articles.In this work,a small quantity of poly(methyl methacrylate)(PMMA)(2 wt%-10 wt%)was incorporated into the PLLA/carbon nanotubes(CNTs)composites.The effects of PMMA content on the dispersion of CNTs as well as the microstructure and hydrolytic degradation behaviors of the composites were systematically investigated.The results showed that PMMA promoted the dispersion of CNTs in the composites.Amorphous PLLA was obtained in all the composites.Largely enhanced hydrolytic degradation resistance was achieved by incorporating PMMA,especially at relatively high PMMA content.Incorporating 10 wt%PMMA led to a dramatic decrease in the hydrolytic degradation rate from 0.19%/h of the PLLA/CNT composite sample to 0.059%/h of the PLLA/PMMA-10/CNT composite sample.The microstructure evolution of the composites was also detected,and the results showed that no crystallization occurred in the PLLA matrix.Further results based on the interfacial tension calculation showed that the enhanced hydrolytic degradation resistance of the PLLA matrix was mainly attributed to the relatively strong interfacial affinity between PMMA and CNTs,which prevented the occurrence of hydrolytic degradation at the interface between PLLA and CNTs.This work provides an alternative method for tailoring the hydrolytic degradation ability of the PLLA-based composites.     

Effect of the Nanotube Radius and the Volume Fraction on the Mechanical Properties of Carbon Nanotube-Reinforced Aluminum Metal Matrix Composites

By using the advantages of carbon nanotubes (CNTs), such as their excellent mechanical properties and low density, CNT-reinforced metal matrix composites (MMCs) are expected to overcome the limitations of conventional metal materials, i.e., their high density and low ductility. To understand the behavior of composite materials, it is necessary to observe the behavior at the molecular level and to understand the effect of various factors, such as the radius and content of CNTs. Therefore, in this study, the effect of the CNT radius and content on the mechanical properties of CNT-Al composites was observed using a series of molecular dynamics simulations, particularly focusing on MMCs with a high CNT content and large CNT diameter. The mechanical properties, such as the strength and stiffness, were increased with an increasing CNT radius. As the CNT content increased, the strength and stiffness increased; however, the fracture strain was not affected. The behavior of double-walled carbon nanotubes (DWNTs) and single-walled carbon nanotubes (SWNTs) was compared through the decomposition of the stress–strain curve and observations of the atomic stress field. The fracture strain increased significantly for SWNT-Al as the tensile force was applied in the axial direction of the armchair CNTs. In the case of DWNTs, an early failure was initiated at the inner CNTs. In addition, the change in the elastic modulus according to the CNT content was predicted using the modified rule of mixture. This study is expected to be useful for the design and development of high-performance MMCs reinforced by CNTs.     

A feasible strategy to constructing hybrid conductive networks in PLA‐based composites modified by CNT‐d‐RGO particles and PEG for mechanical and electrical properties

Carbon nanotubes (CNTs) and reduced graphene oxide (RGO) were successfully assembled by chemical reaction to obtain CNT‐d‐RGO particles. Then, a home‐made dynamic impregnating device was used to prepare hybrid CNT‐d‐RGO/polyethylene glycol (PEG). Next, the different modifiers, including CNTs, GO, CNT‐d‐RGO, PEG, and CNT‐d‐RGO/PEG, were, respectively, added into poly‐(lactic acid) (PLA) matrix via melt‐compounding. The dispersed morphology for these different modifiers within the PLA matrix was confirmed by SEM and TEM observations. Especially, compared with the identical weight ratio of CNT‐d‐RGO, the hybrid CNT‐d‐RGO/PEG within the PLA matrix exhibited an excellent exfoliated and interconnected networks morphology. Moreover, compared with pure PLA, not only the crystallinity of all PLA‐based composites notably improved, but half‐crystallization time was also shortened. Furthermore, despite the addition of different modifiers, the crystal form of PLA‐based composites remained unchanged. Noticeably, compared with those of pure PLA, the tensile stress, strain, and modulus of PLA composite added with CNT‐d‐RGO/PEG increased by 29.4%, 4.1%, and 56.1%, respectively, and the V‐notch impact strength slightly improved. In addition, compared with pure PLA, volume resistivity of the PLA composite added with 1 wt% CNT‐d‐RGO/PEG decreased by 93.1%, and its volume conductivity increased by five orders of magnitude.