3,4-二(3-苯氧基-4-氟苯基)-2,5-二苯基苯基接枝聚硅氧烷气相色谱固定相的合成与表征（英文）

合成了一种耐高温的3,4-二(3-苯氧基-4-氟苯基)-2,5-二苯基苯基接枝聚硅氧烷(DPFP)固定相,使用静态涂渍法将其涂渍到毛细管柱内壁上,制成气相色谱柱。分离裂解乙烯的色谱图显示DPFP固定相在360℃时仍具有良好的分离能力。DPFP固定相的柱效为3 324块/米(保留因子(k)4.24,萘,0.25 mm i.d.)。麦克雷诺常数计算结果显示DPFP固定相属中等极性。溶剂化参数模型结果显示DPFP固定相与溶质之间的主要作用力为偶极-诱导偶极作用力、氢键碱性作用力。Grob试剂分离结果显示DPFP色谱柱具有良好的选择性与惰性。另外,芳香族同分异构体、苯取代物、多环芳烃、脂肪酸酯及脂肪醇都得到了良好的分离,表明DPFP固定相在应用方面有巨大的潜力。     

High-Efficiency Liquid Chromatography Using Sub-2?��m Columns at Elevated Temperature for the Analysis of Sulfonamides in Wastewater

Efficiency in HPLC can be enhanced by increasing the column length and/or decreasing the particle size. The use of high temperature in HPLC has emerged as a valuable tool to overcome the increase in column backpressure when using small packing particles, as it allows for reduction in mobile phase viscosity. In this study, high plate count was obtained by coupling sub-2 ??m columns at elevated temperature to reduce the viscosity of the mobile phase, thus reducing the column backpressure. At 80 °C, up to three columns of 15 cm × 4.6 mm I.D. packed with 1.8 ??m particles could be coupled generating ~84,000 theoretical plates for the last eluting compound. The number of theoretical plates was increased on average by a factor of ~3.6 when three columns were coupled at 80 °C compared with one column at 30 °C. The relationships between separation efficiency and column length were examined using Van Deemter plots constructed at 30 °C and 80 °C for different column lengths. The advantages of using coupled columns in combination with elevated temperature for the environmental analysis were illustrated using test mixtures comprised of eight sulfonamides separated on one column at 30 °C and three coupled columns at 80 °C by isocratic elution. Sample clean up was carried out by employing solid-phase extraction (SPE) using Oasis HLB cartridges. The method developed was validated based on parameters such as linearity, precision, accuracy, detection and quantification limits. Recoveries generally ranged from 71.7 to 99% (with the exception of sulfanilamide), with standard deviations not higher than 4.7%. The detection limits of the method ranged from 0.6?C2 ??g L^?1, while limits of quantification were in the range 2?C6.7 ??g L^?1 with UV detection.     

Styrene‐N‐phenylacrylamide co‐polymer modified silica monolith particles with an optimized mixing ratio of monomers as a new stationary phase for the separation of peptides in high performance liquid chromatography

A stationary phase was prepared by chemical derivatization of the support particles with a layer of copolymer composed of styrene and N‐phenyl acrylamide. Silica monolith particles of ca. 2.6 µm (volume‐based average) have been prepared as the support particles by sol‐gel reaction followed by differential sedimentation. The particles were reacted with 3‐chloropropyl trimethoxysilane followed by sodium diethyldithiocarbamate to introduce an initiator moiety. Then, the copolymer layer was immobilized via reversible addition‐fragmentation transfer polymerization. The resultant phase was packed in glass‐lined stainless‐steel micro‐columns (1 x 150 mm) and evaluated for the separation of a mixture composed of five peptides (Trp‐Gly, Thr‐Tyr‐Ser, angiotensin I, isotocin and bradykinin). The effect of monomer mixing ratio (styrene versus N‐phenyl acrylamide) on the chromatographic separation efficiency of the stationary phase was examined. A number of theoretical plates (N) as high as 33 600 plates/column (224 000 plates/m, 4.46 µm plate height) was achieved using the column packed with the optimized stationary phase. The column‐to‐column reproducibility based on three columns packed with three different batches of stationary phase was found satisfactory in separation efficiency, retention factor, and asymmetry factor.     

Siloxane/silarylene copolymers as stationary phases for capillary gas chromatography. Part II: Phenylsubstituted polymers

A commercially available silanol terminated silicone stationary phase, OV-61-OH (33% phenyl), and two phenyl-substituted siloxane/silarylene copolymers, Sila 3 (27% phenyl) and 4 (35% phenyl), have been evaluated for use as stationary phases in fused silica capillary columns for gas chromatography. Ulterations in column adsorptive activity, separation efficiency, stationary phase film thickness and selectivity after column conditioning for 50 h at 370°C have been studied. A high thermal stability was experienced with the stationary phases tested here. For OV-61-OH, the best thermal stability was obtained when coated on untreated fused silica, which illustrates the importance of grafting reactions here. The heat treatment resulted in some deactivation of adsorptive sites in the column. A higher degree of column deactivation was achieved when surface silylation was performed prior to coating. High thermal stability was achieved with Sila 3 when coated on such surfaces. Sila 3 would thus be preferred in cases when high thermal stability in combination with high dsorptive inertness is desired. Sila 4 showed low column bleeding at 370 °C, but prolonged heating at this temperature resulted in the broadening of n-alkane peaks when eluted at 90 °C. This indicates that excessive crosslinking has taken place during the heat treatment and the minimum allowable column operation temperature is thereby increased to ca. 120 °C. The separation of aza-arenes and of triglycerides are shown as applications.     

Ionic liquid‐bonded polysiloxane as stationary phase for capillary gas chromatography

Ionic liquid (IL) stationary phase is especially suitable for separation of complex samples, owing to the “dual nature” of IL. In this study, a synthetic method of ionic liquid‐bonded polysiloxane (PSOIL) as stationary phase of GC was proposed. Then, the PSOIL was used to prepare an 8 m capillary column by static method. The column efficiency was measured to be about 4000 plates/m (k=3.55, naphthalene) after the column had been conditioned at 210°C. The durability of PSOIL column was better than that of the mixed stationary phase of IL and OV‐1. Moreover, the Abraham solvation parameter model was employed to characterize the PSOIL. The result revealed that the PSOIL had stronger dispersion force (l) than neat IL and stronger hydrogen bond basicity (a) than DB‐1. That meant the PSOIL might offer good selectivity for both polar and non‐polar analytes. The column exhibited unique selectivity for various organic substances, such as the homologous compounds of alkanes, esters, alcohols and aromatic compounds. It was also found that some aromatic positional isomers could be separated better on the PSOIL column than on the DB‐1 column. Furthermore, the stationary phase was suitable for separation of high‐boiling point compounds such as polycyclic aromatic hydrocarbons, phthalic esters, etc. All of these demonstrated that the PSOIL offered good selectivity and high separation efficiency for a wide range of analytes.     

Polymeric imidazolium ionic liquids as valuable stationary phases in gas chromatography: Chemical synthesis and full characterization

Seven new functionalized polymerizable ionic liquids were chemically prepared, and later applied for the preparation of polymeric stationary phases in gas chromatography. These coated GC columns, which exhibited good thermal stabilities (240–300 °C) and very high efficiencies (3120–4200 plates/m), have been characterized using the Abraham solvation parameter model. The chromatographic behavior of these polymeric IL columns has been deeply studied observing excellent selectivities in the separation of many organic substances such as alkanes, ketones, alcohols, amines or esters in mixtures of polar and non polar solvents or fragrances. Remarkably, the challenging separation of xylene isomers has been possible using a bis(trifluoromethylsulfonyl)amide based imidazolium IL coated column as a gas chromatography stationary phase.     

Siloxane/silarylene copolymers as stationary phases for capillary gas chromatography part I: Evaluation of silanol terminated dimethyl substituted polymers

The thermal stability of silicones can be improved on replacement of certain of the oxygen atoms in the polymer backbone by phenyl groups. Such a polymer has been synthesized and evaluated for use as stationary phase in fused silica capillary gas chromatography; the polymer was dimethyl substituted and silanol terminated. A selectivity was provided by the phenyl groups in the backbone. For comparative purposes, a silanol-terminated dimethylpolysiloxane has also been evaluated. Both stationary phases gave columns of highest separation efficiency and the supporting fused silica surface was deactivated by the stationary phases on thermal treatment. Further, low column bleeding was observed at the maximum temperature tested, 370°C. The phenyl-containing phase could be immobilized to 60% by heat treatment, but the pure dimethylpolysiloxane was 10% immobilized. The influence on immobilization of factors such as nature of the supporting surface, stationary phase silanol content, reaction temperature and atmosphere in the column during reaction has been studied.     

Study on the thermal stability of a chiral stationary phase coated on capillaries for GC

A chiral stationary phase prepared by bonding L -valine-t-butylamide to XE-60 has been coated on glass and metal capillaries. The performances of the chiral glass and metal columns were equivalent to those of commercial fused silica capillary columns. The thermal stability of the glass column was examined up to 280°C. It was found that no appreciable change in separation factor (α value) was observed up to 230°C. The α values gradually decreased between 240 and 260°C, and enantiomer separation was no longer achieved at 280°C. It was concluded that the allowable upper limit temperature of the chiral stationary phase is between 230 and 240°C in the isothermal mode, and ca 260°C in temperature-programmed mode.     

Synthesis and chromatographic evaluation of phenyl/tetrazole bonded stationary phase based on thiol‐epoxy ring opening reaction

A silica‐based reversed‐phase stationary phase bonding with phenyl and tetrazole groups was synthesized by thiol‐epoxy ring opening reaction. The bonded groups could not only provide hydrophobic interaction, but also π–π, hydrogen bonding, electrostatic interactions, and so on. The results of characterization with elemental analysis and solid‐state ¹³C cross‐polarization magic‐angle‐spinning NMR spectroscopy indicated the successful preparation of phenyl/tetrazole sulfoether bonded stationary phase. Chromatographic evaluation revealed that phenyl/tetrazole sulfoether bonded stationary phase behaved well under the reversed‐phase mode. The column parameters (H, S*, A, B, and C) showed different selectivity compared with some typical commercial columns, and it was validated by the separation of estrogen, ginsenoside, alkaloid samples. Based on the different selectivity between phenyl/tetrazole sulfoether bonded stationary phase and C18 columns, phenyl/tetrazole sulfoether bonded stationary phase also showed potential to construct a 2D reversed‐phase liquid chromatography system with C18. And it was verified by the separation of corydalis tuber and curcuma zedoary extracts.     

A 3-D open-framework material with intrinsic chiral topology used as a stationary phase in gas chromatography

Compared with liquid chromatography and capillary electrophoresis, the diversity of gas chromatography chiral stationary phases is rather limited. Here, we report the fabrication of Co(d-Cam)_1/2(bdc)_1/2(tmdpy) (d-Cam?=?d-camphoric acid; bdc?=?1,4-benzenedicarboxylate; tmdpy?=?4,4′-trimethylenedipyridine)-coated open tubular columns for high-resolution gas chromatographic separation of compounds. The Co(d-Cam)_1/2(bdc)_1/2(tmdpy) compound possesses a 3-D framework containing enantiopure building blocks embedded in intrinsically chiral topological nets. In this study, two fused-silica open tubular columns with different inner diameters and lengths, including column A (30 m?×?530 μm i.d.) and column B (2 m?×?75 μm i.d.), were prepared by a dynamic coating method using Co-(d-Cam)_1/2(bdc)_1/2(tmdpy) as the stationary phase. The chromatographic properties of the two columns were investigated using n-dodecane as the test compound at 120 °C. The number of theoretical plates (plates/m) of the two metal–organic framework columns was 1,450 and 3,100, respectively. The separation properties were evaluated using racemates, isomers, alkanes, alcohols, and Grob's test mixture. The limit of detection and limit of quantification were found to be 0.125 and 0.417 ng for citronellal enantiomers, respectively. Repeatability (n?=?6) showed lower than 0.25 % relative standard deviation (RSD) for retention times and lower than 2.2 % RSD for corrected peak areas. The experimental results showed that the stationary phase has excellent selectivity and also possesses good recognition ability toward these organic compounds, especially chiral compounds.

PEG-linked geminal dicationic ionic liquids as selective, high-stability gas chromatographic stationary phases

It is known that room-temperature ionic liquids (RTILs) have wide applicability in many scientific and technological fields. In this work, a series of three new dicationic room-temperature ionic liquids functionalized with poly(ethylene glycol) (PEG) linkages were synthesized and characterized via a linear solvation model. The application of these ILs as new GC stationary phases was studied. The efficient separation of several mixtures containing compounds of different polarities and 24 components of a flavor and fragrance mixture indicated comparable or higher resolving power for the new IL stationary phases compared to the commercial polysiloxane and poly(ethylene glycol)-based stationary phases. In addition, the selectivities of the IL stationary phases could be quite unique. The separation of a homologous alkane and alcohol mixture displayed the “dual nature” of these ionic liquids as GC stationary phases. The thermal stability study showed the column robustness up to 350 °C. The high separation power, unique selectivity, high efficiency and high thermal stability of the new dicationic ionic liquids indicate that they may be applicable as a new type of robust GC stationary phase.     

Liquid crystalline polymers as stationary phases. IV. Chemical bonding and immobilization of the polymer on silica characterization by solid-state nuclear magnetic resonance spectroscopy

Chemical bonding reaction and immobilization through low energy radiation (heating) have been investigated to fix a side-chain liquid crystalline polymer (SC-LCP) on silica particles in order to use the resulting modified silica in normal-phase HPLC. Highly stable chromatographic stationary phases are observed under excellent polymer solvent flow conditions (THF) for both methods and better column efficiencies are also exhibited towards PAHs' separation compared to the classical coated stationary phase. The characterization of these new stationary phases and the rationale for improved column stability have been investigated by solid state 13C and 29Si CP/MAS NMR spectroscopy. It is clearly shown that the chemical bonding is achieved by the classical hydrosilylation reaction between PHMS chains and vinyl modified silica. The bonded polymer is likely a copolymer than a homopolymer. The immobilization of the SC-LCP by heating results in the breaking of Si-O-Si bonds of the polysiloxane chain after the attack of the silica surface silanols. Applications to fullerenes and carotenes separation of these bonded stationary phases are compared to the separation power of a classical monomeric C18 stationary phase in NP-HPLC as n-hexane-toluene or methyl-tertiobutyl ether-methanol mixtures.     

聚硅氧烷离子液体用于快速气相色谱固定相的研究

合成了聚硅氧烷键合离子液体[PSOMIM][NTf2],并将其用作快速气相色谱柱的固定相.初步探索了采用短柱及小内径毛细管柱(3 m×75 μm i.d.)时的分离性能及固定相膜厚对分离性能的影响.与常规柱(8m×0.25 mmi.d.)相比,在不损失分离度的前提下,分离速度可提高1～6倍;当膜厚为0.056 μm时,可以将分离速度提高2～4倍.实验结果表明,聚硅氧烷键合离子液体固定相可以有效弥补由于缩短柱长所导致的分离度减小的问题,在快速气相色谱固定相方面具有较好的应用前景.     

Liquid crystal stationary phases for gas chromatography and supercritical fluid chromatography

Novel monomeric and polymeric liquid crystalline compounds were synthesized as stationary phases for gas chromatography (GC) and supercritical fluid chromatography (SFC). Monomeric liquid crystalline compounds were used in packed column gas chromatography for the separation of isomeric aromatic compounds and insect sex pheromones. Liquid crystalline polymers possess long nematic ranges and a uniform coating was easily achieved in glass and fused silica capillaries, which could stand temperatures up to 250°C in GC and pressures of 200 MPa at 160°C in SFC. The columns provide excellent selectivity and resolution for fused ring aromatic compounds such as the isomers anthracene and phenanthrene or triphenylene and chrysene.     

Comprehensive two-dimensional gas chromatography using a high-temperature phosphonium ionic liquid column

A high-temperature ionic liquid, trihexyl(tetradecyl)phosphonium bis(trifluoromethane)sulfonamide, was used as the primary column stationary phase for comprehensive two-dimensional gas chromatography (GC × GC). The ionic liquid (IL) column was coupled to a 5% diphenyl/95% dimethyl polysiloxane (HP-5) secondary column. The retention characteristics of the IL column were compared to polyethylene glycol (DB-Wax) and 50% phenyl/50% methyl polysiloxane (HP-50+). A series of homologous compounds that included hydrocarbons, oxygenated organics, and halogenated alkanes were analyzed with each column combination. This comparison showed that the ionic liquid is less polar than DB-Wax but more polar than HP-50+. The most unique feature of the IL × HP-5 column combination is that alkanes, cyclic alkanes, and alkenes eluted in a narrow band in the GC × GC chromatogram; whereas, these compounds occupied a much larger portion of the DB-Wax × HP-5 and the HP-50+ × HP-5 chromatograms. Each column combination was used to analyze diesel fuel. The IL × HP-5 chromatogram displayed narrow bands for three major compound classes in diesel fuel: saturates, monoaromatics, and diaromatics. The IL column was used at temperatures as high as 290 °C for several months without any noticeable changes in column performance.     

Use of hydrolyzed chlorosilanes for the preparation of high resolution glass capillary columns

Summary A new procedure for the preparation of high resolution open tubular glass capillary columns is described. This procedure involves the preparation of polysiloxane polymers obtained by alkaline hydrolysis of alkyl chlorosilane. The mixture of polysiloxane polymers is then coated on the wall of previously HCl treated glass capillary columns using a dynamic method. A base-catalysed reaction using gaseous ammonia, applied to the coated polymers leads to a stable chemically bonded stationary phase, with non-polar characteristics. This type of column is easier to prepare than conventional ones and exhibits excellent chromatographic properties, both with regard to their resolution, stability and reproducibility. The flexibility of this method permits the use of other types of commercially available chlorosilanes (i.e. methylphenyl chlorosilane) to prepare polar polysiloxane polymers suitable for analysis of complex biochemical mixtures, such as steroid metabolites.     

Evaluation of thermally pretreated silica stationary phases under hydrophilic interaction chromatography conditions

Three novel hydrophilic interaction chromatography columns packed with bare silica 2.6 μm superficially porous particles were evaluated. These stationary phases undergo a different pretreatment temperature (400, 525, and 900°C) that might influence their kinetic performance and thermodynamic properties. In the first instance, we demonstrated that the performance of these columns was inferior to the commercial ones in the low plate count range (10 000 plates), but was more favorable for N values beyond 40 000 plates. Thanks to its high permeability and reasonable flow resistance (φ = 695), together with a minimum reduced heights equivalent to a theoretical plate value of only 2.4, the stationary phase pretreated at 400°C was particularly attractive for N > 70 000 plates with a remarkably low impedance value (E = 2488). In a second step, the impact of pretreatment temperature was evaluated using two mixtures of polar substances, namely nucleobases and derivatives, as well as nicotine and derivatives. Retentions and selectivities achieved on the tested stationary phases were appropriate, but selectivity differences were minor when modifying pretreatment temperature from 400 to 525°C. When we increased the pretreatment temperature up to 900°C, the surface chemistry was more seriously modified. Finally, the columns presented a good stability even at high temperature (70°C), especially for the phases pretreated at 400 and 525°C.     

Triptycene-derived heterocalixarene: A new type of macrocycle-based stationary phases for gas chromatography

This work reports the investigation of a new triptycene-derived oxacalixarene(TDOC) as the stationary phase for gas chromatography(GC) with high-resolution performance for a wide range of analytes and isomers.The TDOC scaffold is composed of triptycene and 1,8-naphthyridine moieties,inherently differing from the conventional calixarenes in structures and properties.As a result,the TDOC column exhibited outstanding column efficiency of 5679 plates/m by n-dodecane at 120℃.It showed advantageous performance for separations of the mixtures with various analytes and achieved high resolution of diverse isomers(skeletal,positional and cis-/trans-isomers) from apolar to polar nature.Moreover,the TDOC column exhibited high thermal stability up to 310℃.To date,the TDOC-based materials have not been reported in chromatography.This work demonstrates the good potential of the triptycene-derived heterocalixarenes as a new class of stationary phases for chromatographic analyses.     

新型侧链聚硅氧烷高分子液晶作毛细管柱气相色谱固定液的研究

 以合成的新型胆甾酯类侧链聚硅氧烷高分子液晶作固定液 ,涂渍在弹性石英毛细管柱上 ,获得了具有较高的柱效和选择性、良好的热稳定性、适于分离多种异构体混合物的毛细管柱。     

3D Chiral Nanoporous Metal–Organic Framework for Chromatographic Separation in GC

Metal–organic frameworks (MOFs) have received great attention as stationary phases in chromatographic separation technology because of their unusual properties such as high surface areas, fascinating structures, and excellent chemical and thermal stability. A chiral MOF, [(CH₃)₂NH₂][Cd(bpdc)_1.5]·2DMA, possesses a unique chiral nanotube motif built from the covalent linkage of homochiral nanotubes made up of octuple helices. Here, we report the fabrication of a three-dimensional (3D) chiral nanoporous MOF-coated capillary column (2 m long × 75 μm i.d.) for capillary gas chromatographic separation of racemates, Grob’s test mixture, normal alkanes, normal alcohols, and isomers. The MOF-coated capillary column offered good separation efficiency (2,180 plates m^?1), which was measured using n-dodecane as the analyte at 120 °C. The relative standard deviations of repeatability for citronellal on MOF-coated capillary column were 0.23 and 2.1 % for retention time and peak area, respectively. The results demonstrated that the capillary column exhibited excellent selectivity and separation ability toward Grob’s test mixture, normal alkanes, normal alcohols and isomers, especially for racemates.