Optical studies of dynamic director configurations in ferroelectric liquid crystal devices

An investigation into the transmission spectrum of a ferroelectric liquid crystal device is undertaken. This is done both for an initial static state and during a switching process. Comparisons are made between experimental data and theoretical predictions. The dynamic internal director configurations in the device is shown to be consistent with a simple model during both monopolar and bipolar addressing pulses.     

Stibine and bismuthine trapping in quartz tube atomizers for atomic absorption spectrometry — Method optimization and analytical applications

The compact trap-and-atomizer device was employed to trap stibine and bismuthine, and subsequently to volatilize collected analyte and atomize it for atomic absorption spectrometric detection. The device is actually the multiple microflame quartz tube atomizer (multiatomizer) with inlet arm modified to serve as the trap and to accommodate the oxygen delivery capillary employed for burning out hydrogen during the trapping step. The optimization of Sb and Bi collection in the device is presented based on a study of the influence of relevant experimental parameters on preconcentration efficiency of both analytes. The parameters studied were: (1) trap temperature during trapping and (2) hydrogen flow rate and (3) trap temperature during volatilization and (4) the stability of the trapped analyte species. Under optimized conditions, the preconcentration efficiency was 100% for both analytes. The trap-and-atomizer device can be replaced by the simple conventional externally heated quartz tube atomizer without any trap as demonstrated on the ultratrace antimony determination in groundwater reference material and mineral water samples. The interference of other hydride forming elements on Bi in-situ collection in the conventional externally heated quartz tube atomizer was investigated.     

Cell culture chip using low-shear mass transport

We have developed a flow cell that allows culturing adherent cells as well as suspended cells in a stable, homogeneous, and low-shear force environment. The device features continuous medium supply and waste exchange. In this paper, a simple and fast protocol for device design, fabrication, and assembly (sealing) based on a poly(dimethylsiloxane) (PMDS)/glass slide hybrid structure is described. The cell culture system performance was monitored, and the effective shear force inside the culture well was also determined. By manipulating the device dimensions and volumetric flow rate, shear stress was controlled during experiments. Cell adhesion, growth, proliferation, and death over long-term culture periods were observed by microscopy. The growth of both endothelial and suspension cells in this device exhibited comparable characteristics to those of traditional approaches. The low-shear culture device significantly reduced shear stress encountered in microfluidic systems, allowing both adherent and suspended cells to be grown in a simple device.     

A dual frequency addressed polymer stabilized pi-cell liquid crystal device

Dual frequency addressing of nematic pi-cell devices produces submillisecond switching times since the liquid crystal can be driven both parallel and perpendicular to the applied field and there is no kick-back of the director during switching. The nucleation of the V state in devices containing dual frequency liquid crystal materials is much slower than that in conventional pi-cells, however. Polymer stabilization of the V state eliminates the need for nucleation each time the device is used. In this paper we present a polymer stabilized pi-cell containing a dual frequency liquid crystal material, and show that the presence of the polymer network significantly influences the switching of the device. Some optimization of the addressing scheme is required when switching the polymer stabilized device in order to avoid transient formation of the twisted state. Using this optimization, the switching time is under 3 ms across a wide range of addressing voltages.     

A PDMS Device Coupled with Culture Dish for In Vitro Cell Migration Assay

Cell migration and invasion are important factors during tumor progression and metastasis. Wound-healing assay and the Boyden chamber assay are efficient tools to investigate tumor development because both of them could be applied to measure cell migration rate. Therefore, a simple and integrated polydimethylsiloxane (PDMS) device was developed for cell migration assay, which could perform quantitative evaluation of cell migration behaviors, especially for the wound-healing assay. The integrated device was composed of three units, which included cell culture dish, PDMS chamber, and wound generation mold. The PDMS chamber was integrated with cell culture chamber and could perform six experiments under different conditions of stimuli simultaneously. To verify the function of this device, it was utilized to explore the tumor cell migration behaviors under different concentrations of fetal bovine serum (FBS) and transforming growth factor (TGF-β) at different time points. This device has the unique capability to create the “wound” area in parallel during cell migration assay and provides a simple and efficient platform for investigating cell migration assay in biomedical application.     

Heating induced aggregation in non-fullerene organic solar cells towards high performance

Molecular ordering within the photoactive layer plays a crucial role in determining the device performance of organic solar cells(OSCs).However,the simultaneous molecular ordering processes of polymer donors and non-fullerene acceptors(NFAs)during solution casting usually bring confinement effect,leading to insufficient structural order of photovoltaic components.Herein,the molecular packing of mINPOIC NFA is effectively formed through a heating induced aggregation strategy,with the aggregation of PBDB-T,which has a strong temperature dependence,is retarded by casting on a preheated substrate to reduce its interference toward m-INPOIC.A sequent thermal annealing treatment is then applied to promote the ordering of PBDB-T and achieve balanced aggregation of both donors and acceptors,resulting in the achievement of a maximum efficiency of 13.9% of PBDB-T:m-INPOIC binary OSCs.This work disentangles the interactions of donor polymer and NFA during the solution casting process and develops a rational strategy to enhance the molecular packing of NFAs to boost device performance.     

A microfluidic approach for measuring capillary pressure in PEMFC gas diffusion layers

A dearth of experimental capillary pressure data limits our understanding and optimization of liquid water transport in PEMFC gas diffusion layers (GDLs). A microfluidic device and method is described for measuring the capillary pressure as a function of liquid water saturation for these thin porous materials with complex, heterogeneous wetting properties. A sample sandwich (hydrophilic membrane–GDL–hydrophobic membrane) is key for probing the entire hydrophilic and hydrophobic pore volume of the GDL during sequential liquid intrusion and gas intrusion experiments. The capillary pressure curves for an as-purchased Toray 090 and two differentially-processed Avcarb P75T GDLs were evaluated; each material displayed highly repeatable, but quantitatively different, room temperature capillary pressure curves that matched qualitative differences in their macroscopic wettability. The measurements show that hysteresis between the liquid intrusion and gas intrusion curves is significant. For example, both the Toray and fully wet-proofed Avcarb GDLs appear hydrophobic during most of the liquid intrusion curve and hydrophilic during most of the gas intrusion curve. The implications of this work for water management, and future device designs and experiments are described.     

一种直热式快速气相色谱快速升温装置的设计

用大电流脉冲直接加热不锈钢毛细管柱, 将脉冲间隔调整到正好使柱管局部完成热平衡, 用快速PID技术控制脉冲频率和宽度, 设计了一种直热式快速升温装置. 该装置最高升温速率可达到5 ℃/s, 升温范围 40~150 ℃, 程序升温线性相关系数大于0.9996, 最大功耗74 W, 加热平均功耗小于50 W, 在34 s内完成nC8~nC17 10种正构烷烃的分离, 保留时间重复精度误差RSD在0.22%~0.55％之间, 降温和平衡时间仅为30 s. 与常规气相色谱仪相比, 该装置分析挥发性和半挥发性有机物速度可提高20倍以上, 专用于快速气相色谱仪.     

Activity monitoring of functional OprM using a biomimetic microfluidic device

This paper describes the fabrication and use of a biomimetic microfluidic device for the monitoring of a functional porin reconstituted within a miniaturized suspended artificial bilayer lipid membrane (BLM). Such a microfluidic device allows for (1) fluidic and electrical access to both sides of the BLM and (2) reproducible membrane protein insertion and long-term electrical monitoring of its conductance (G(i)), thanks to the miniaturization of the BLM. We demonstrate here for the first time the feasibility to insert a large trans-membrane protein through its β-barrel, and monitor its functional activity for more than 1 hour (limited by buffer evaporation). In this paper, we specifically used our device for the monitoring of OprM, a bacterial efflux channel involved in the multidrug resistance of the bacteria Pseudomonas aeruginosa. Sub-steps of the OprM channel conductance were detected during the electrical recordings within our device, which might be due to oscillations between several structural conformations (sub-states) adopted by the protein, as part of its opening mechanism. This work is a first step towards the establishment of a genuine platform dedicated to the investigation of bacterial proteins under reconstituted conditions, a very promising tool for the screening of new inhibitors against bacterial channels involved in drug resistance.     

A novel non-invasive electrochemical biosensing device for in situ determination of the alcohol content in blood by monitoring ethanol in sweat

A non-invasive, passive and simple to use skin surface based sensing device for determining the blood's ethanol content (BAC) by monitoring transdermal alcohol concentration (TAC) is designed and developed. The proposed prototype is based on bienzyme amperometric composite biosensors that are sensitive to the variation of ethanol concentration. The prototype correlates, through previous calibration set-up, the amperometric signal generated from ethanol in sweat with its content in blood in a short period of time. The characteristics of this sensor device permit determination of the ethanol concentration in isolated and in continuous form, giving information of the BAC of a subject either in a given moment or its evolution during long periods of time (8 h). Moreover, as the measurements are performed in a biological fluid, the evaluated individual is not able to alter the result of the analysis. The maximum limit of ethanol in blood allowed by legislation is included within the linear range of the device (0.0005–0.6 g L⁻¹). Moreover, the device shows higher sensitivity than the breathalyzers marketed at the moment, allowing the monitoring of the ethanol content in blood to be obtained just 5 min after ingestion of the alcoholic drink. The comparison of the obtained results using the proposed device in the analysis of 40 volunteers with those provided by the gas chromatographic reference method for determination of BAC pointed out that there were no significant differences between both methods.     

High-performance, stable organic thin-film field-effect transistors based on bis-5'-alkylthiophen-2'-yl-2,6-anthracene semiconductors

The development of new organic semiconductors with improved electrical performance and enhanced environmental stability is the focus of considerable research activity. This communication presents the design, synthesis, and device stability data for novel bis-5'-alkylthiophen-2'yl-2,6-anthracene organic semiconductors. When incorporated into thin-film field-effect transistors, mobilities as high as 0.5 cm2/Vs and on/off current ratios greater than 107 are observed. We have investigated device stability in terms of both shelf life and operating lifetime. Devices incorporating the reported semiconductors display an average field-effect mobility of 0.4 cm2/Vs for DHTAnt and an on/off current ratio of 106 even after 15 months of storage. Furthermore, there is no decrease in performance during continuous operation of the devices over several thousand cycles.     

Loading device effect on protein unfolding mechanics

Single-molecule mechanical manipulation has enabled quantitative understanding of not only the kinetics of both bond rupture and protein unfolding, but also the free energy landscape of chemical bond and/or protein folding. Despite recent studies reporting the role of loading device in bond rupture, a loading device effect on protein unfolding mechanics has not been well studied. In this work, we have studied the effect of loading-device stiffness on the kinetics of both bond rupture and protein unfolding mechanics using Brownian dynamics simulations. It is shown that bond rupture forces are dependent on not only loading rate but also the stiffness of loading device, and that protein unfolding mechanics is highly correlated with the stiffness of loading device. Our study sheds light on the importance of loading device effect on the mechanically induced bond ruptures and protein unfolding.     

Continuous determination of carbon dioxide evolved during thermal decomposition reactions

A simple device suitable for continuous monitoring of carbon dioxide evolved during thermal decomposition reactions is described. Carbon dioxide is transported by a carrier gas through the device connected to thermoanalytical equipment and absorbed by soda lime reagent. The reaction heat released is linearly proportional to the amount of carbon dioxide absorbed.     

Detection of nucleotides in hydrated ssDNA via 2D h-BN nanopore with ionic-liquid/salt–water interface

Accomplishing slow translocation speed with high sensitivity has been the most critical mission for solid-state nanopore (SSN) device to electrically detect nucleobases in ssDNA. In this study, a method to detect nucleobases of ssDNA using a 2D SSN is introduced by considerably reducing the translocation speed and effectively increasing its sensitivity. The ultra-thin titanium dioxide coated hexagonal boron nitride nanopore was fabricated, along with an ionic-liquid 1-butyl-3-methylimidazolium hexafluorophosphate/2.0 M KCl aqueous (cis/trans) interface, for increasing both the spatial and the temporal resolutions. As the ssDNA molecules entered the nanopore, a brief surge of electrical conductivity occurred, which was followed by multiple resistive pulses from nucleobases during the translocation of ssDNA and another brief current surge flagging the exit of the molecule. The continuous detection of nucleobases using a 2D SSN device is a novel achievement: the water molecules bound to ssDNA increased the molecular conductivity and amplified electrical signals during the translocation. Along with the experiment, computational simulations using COMSOL Multiphysics are presented to explain the pivotal role of water molecules bound to ssDNA to detect nucleobases using a 2D SSN.     

Design and operation of magnetophoretic systems at microscale: Device and particle approaches

Combining both device and particle designs are the essential concepts to be considered in magnetophoretic system development. Researcher efforts are often dedicated to only one of these design aspects and neglecting the interplay between them. Herein, to bring out importance of the idea of integration between device and particle, we reviewed the working principle of magnetophoretic system (includes both device and particle design concepts). Since, the magnetophoretic force is influenced by both field gradient and magnetization volume, hence, accurate prediction of the magnetophoretic force is relying on the availability of information on both parameters. In device design, we focus on the different strategies used to create localized high-field gradient. For particle design, we emphasize on the scaling between hydrodynamic size and magnetization volume. Moreover, we also briefly discussed the importance of magnetoshape anisotropy related to particle design aspect of magnetophoretic systems. Next, we illustrated the need for integration between device and particle design using microscale applications of magnetophoretic systems, include magnetic tweezers and microfluidic systems, as our working example. On the basis of our discussion, we highlighted several promising examples of microscale magnetophoretic systems which greatly utilized the interplay between device and particle design. Further, we concluded the review with several factors that possibly resulted in the lack of research efforts related to device and particle design integration.     

Development of a photosystem II-based optical microfluidic sensor for herbicide detection

Herbicides are highly toxic for both human and animal health. The increased application of herbicides in agriculture during the last decades has resulted in the contamination of both soil and water. Herbicides, under illumination, can inhibit photosystem II electron transfer. Photosynthetic membranes isolated from higher plants and photosynthetic micro-organisms, immobilized and stabilized, can serve as a biorecognition element for a biosensor. The inhibition of photosystem II causes a reduced photoinduced production of hydrogen peroxide, which can be measured by a chemiluminescence reaction with luminol and the enzyme horseradish peroxidase. In the present work, a compact and portable sensing device that combines the production and detection of hydrogen peroxide in a single flow assay is proposed for herbicide detection.     

Induced electrokinetic transport in micro-nanofluidic interconnect devices

Hybrid micro-nanofluidic interconnect devices can be used to control analyte transfer from one microchannel to the other through a nanochannel under rest, injection, and recovery stages of operation by varying the applied potential bias. Using numerical simulations based on coupled transient Poisson-Nernst-Planck and Stokes equations, we examine the electrokinetic transport in a gateable device consisting of two 100 microm long, 1 microm wide negatively charged microchannels connected by a 1 microm long, 10 nm wide positively charged nanochannel under both positive and negative bias potentials. During injection, accumulation of ions is observed at the micro-nano interface region with the positive potential and depletion of ions is observed at the other micro-nano junction region. Net space charge in the depletion region gives rise to nonlinear electrokinetic transport during the recovery stage due to induced pressure, induced electroosmotic flow of the second kind, and complex flow circulations. Ionic currents are computed as a function of time for both positive and negative bias potentials for the three stages. Analytical expressions derived for ion current variation are in agreement with the simulated results. In the presence of multiple accumulation or depletion regions, we show that a hybrid micro-nano device can be designed to function as a logic gate.     

Condensation of analyte vapor species in graphite furnace atomic absorption spectrometry

A shadow spectral digital imaging technique (SSDI) with charge coupled device (CCD) camera detection was used to investigate the spatial and temporal distribution of condensation clouds of analyte species generated in a graphite furnace during the atomization of 5–40-μg masses of metals. Complex, non-uniform structures of aerosol species located away from both the graphite tube axis and walls are prevalent. Species giving rise to observed signals are likely clusters of metals in the case of Ag, Au and Pd, and oxide aerosols for elements such as Al, Ca and Mg. Source scatter often arises during the atomization of relatively large masses of analytes (or during the atomization of real samples containing high concentrations of concomitant matrix species) in the graphite furnace due to such aerosol formation. The SSDI technique is an extremely useful aid to the elucidation of this phenomenon and imaging at several wavelengths using both line and continuum sources in combination with (thermal, incandescent) emission from these structures permits a more complete picture to be developed.     

Fabrication of porous polymer monoliths covalently attached to the walls of channels in plastic microdevices

UV-initiated grafting of plastic tubes and microfluidic chips with ethylene diacrylate followed by the preparation of porous polymer monoliths has been studied. The first step affords a thin grafted layer of polymer with a multiplicity of pendent double bonds that are then used in the second step for covalent attachment of the monolith to the wall. As clearly seen on scanning electron micrographs, this procedure prevents the formation of voids at the monolith-channel interface a problem that has always plagued approaches involving bulk polymerization in nontreated channels due to the shrinkage of the monolith during the polymerization process and its lack of compatibility with the material of the device. Irradiation with UV light through a photomask allows precise patterning specifying both the area subjected to surface modification and the location of the monolith within specific areas of the device.     

Rapid detection of bacterial endotoxins in ophthalmic viscosurgical device materials by direct analysis in real time mass spectrometry

Bacterial endotoxins are lipopolysaccharides bound to the bacterial cell wall and released when bacteria rupture or disintegrate. Possible contamination of endotoxin in ophthalmic devices can cause a painful eye inflammation or result in toxic anterior segment syndrome after cataract surgery. Measurement of bacterial endotoxin in medical device materials is difficult since endotoxin binds with polymer matrix and some of the materials are very viscous and non-water soluble, where traditional enzyme-based Limulus amebocyte lysate (LAL) assay cannot be applied. Here we propose a rapid and high throughput ambient ionization mass spectrometric (MS) method using direct analysis in real time (DART) for the evaluation of endotoxin contamination in medical device materials. Large and structurally complex endotoxin instantaneously breaks down into low-mass characteristic fragment ions using DART and is detected by MS in both positive and negative ion modes. This method enables the identification and separation of endotoxin from medical materials with a detection limit of 0.03 ng mL⁻¹ endotoxins in aqueous solution. Ophthalmic viscosurgical device materials including sodium hyaluronate (NaHA), non-water soluble perfluoro-n-octane (PFO) and silicone oil (SO) were spiked with different known concentrations of endotoxin and analyzed by DART MS, where the presence of endotoxin was successfully detected and featured small mass fragment ions were generated for NaHA, PFO and SO as well. Current findings showed the feasibility of measuring endotoxin contamination in medical device materials using DART-MS, which can lead to a one-step analysis of endotoxins in different matrices, avoiding any potential contamination during sample pre-treatment steps.