Synthesis and Mechanical Properties of Polypropylene-based Polymer Hybrids via Controlled Radical Polymerization

Isotactic polypropylene-based graft copolymers linking poly(methyl methacrylate), poly(n-butyl acrylate) and polystyrene were successfully synthesized by a controlled radical polymerization with isotactic polypropylene (iPP) macroinitiator. The hydroxylated iPP, prepared by propylene/10-undecen-1-ol copolymerization with a metallocene/methyl-aluminoxane/triisobutylaluminum catalyst system, was treated with 2-bromoisobutyryl bromide to produce a Br-group containing iPP (PP-g-Br). The resulting PP-g-Br could initiate controlled radical polymerization of methyl methacrylate, n-butyl acrylate and styrene by using a copper catalyst system, leading to a variety of iPP-based graft copolymers with a different content of the corresponding polar segment. These graft copolymers demonstrated unique mechanical properties dependent upon the kind and content of the grafted polar segment.     

Synthesis of a novel graft copolymer with hyperbranched poly(glycerol) as core and “Y”‐shaped polystyrene‐b‐poly(ethylene oxide)2 as side chains

The graft copolymers composed of “Y”‐shaped polystyrene‐b‐poly(ethylene oxide)₂ (PS‐b‐PEO₂) as side chains and hyperbranched poly(glycerol) (HPG) as core were synthesized by a combination of “click” chemistry and atom transfer radical polymerization (ATRP) via “graft from” and “graft onto” strategies. Firstly, macroinitiators HPG‐Br were obtained by esterification of hydroxyl groups on HPG with bromoisobutyryl bromide, and then by “graft from” strategy, graft copolymers HPG‐g‐(PS‐Br) were synthesized by ATRP of St and further HPG‐g‐(PS‐N₃) were prepared by azidation with NaN₃. Then, the precursors (Bz‐PEO)₂‐alkyne with a single alkyne group at the junction point and an inert benzyl group at each end was synthesized by sequentially ring‐opening polymerization (ROP) of EO using 3‐[(1‐ethoxyethyl)‐ethoxyethyl]‐1,2‐propanediol (EEPD) and diphenylmethylpotassium (DPMK) as coinitiator, termination of living polymeric species by benzyl bromide, recovery of protected hydroxyl groups by HCl and modification by propargyl bromide. Finally, the “click” chemistry was conducted between HPG‐g‐(PS‐N₃) and (Bz‐PEO)₂‐alkyne in the presence of N,N,N′,N″,N”‐pentamethyl diethylenetriamine (PMDETA)/CuBr system by “graft onto” strategy, and the graft copolymers were characterized by SEC, ¹H NMR and FTIR in details. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

V‐shaped graft copolymers via triple click reactions: Diels–alder,copper‐catalyzed azide–alkyne cycloaddition,and nitroxide radical coupling

We report here a simple and universal synthetic pathway covering triple click reactions, Diels–Alder, copper‐catalyzed azide–alkyne cycloaddition (CuAAC), and nitroxide radical coupling (NRC), to prepare well‐defined graft copolymers with V‐shaped side chains. The Diels–Alder click reaction between the furan protected‐maleimide‐terminated poly(ethylene glycol) (PEG) and a trifunctional core ( 1 ) carrying an anthracene, alkyne, and bromide was carried out to yield the corresponding α‐alkyne‐ and α‐bromide‐terminated PEG (PEG‐alkyne/Br) in toluene at 110 °C. Subsequently, the polystyrene or polyoxanorbornene with pendant azide functionality as a main backbone is reacted with the PEG‐alkyne/Br and 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO)‐terminated poly(ε‐caprolactone) using the CuAAC and NRC reactions in a one‐pot fashion in N,N′‐dimethylformamide at room temperature to result in the target V‐shaped graft copolymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4667–4674     

Block‐brush copolymers via ROMP and sequential double click reaction strategy

We report an efficient way, sequential double click reactions, for the preparation of brush copolymers with AB block‐brush architectures containing polyoxanorbornene (poly (ONB)) backbone and poly(ε‐caprolactone) (PCL), poly(methyl methacrylate) (PMMA) or poly(tert‐butyl acrylate) (PtBA) side chains: poly(ONB‐g‐PMMA)‐b‐poly(ONB‐g‐PCL) and poly(ONB‐g‐PtBA)‐b‐poly(ONB‐g‐PCL). The living ROMP of ONB affords the synthesis of well‐defined poly(ONB‐anthracene)₂₀‐b‐poly (ONB‐azide)₅ block copolymer with anthryl and azide pendant groups. Subsequently, well‐defined linear alkyne end‐functionalized PCL (PCL‐alkyne), maleimide end‐functionalized PMMA (PMMA‐MI) and PtBA‐MI were introduced onto the block copolymer via sequential azide‐alkyne and Diels‐Alder click reactions, thus yielding block‐brush copolymers. The molecular weight of block‐brush copolymers was measured via triple detection GPC (TD‐GPC) introducing the experimentally calculated dn/dc values to the software. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis,characterization, and micellization of PCL‐g‐PEG copolymers by combination of ROP and “Click” chemistry via “Graft onto” method

Biodegradable and biocompatible PCL‐g‐PEG amphiphilic graft copolymers were prepared by combination of ROP and “click” chemistry via “graft onto” method under mild conditions. First, chloro‐functionalized poly(ε‐caprolactone) (PCL‐Cl) was synthesized by the ring‐opening copolymerization of ε‐caprolactone (CL) and α‐chloro‐ε‐caprolactone (CCL) employing scandium triflate as high‐efficient catalyst with near 100% monomer conversion. Second, the chloro groups of PCL‐Cl were quantitatively converted into azide form by NaN₃. Finally, copper(I)‐catalyzed cycloaddition reaction was carried out between azide‐functionalized PCL (PCL‐N₃) and alkyne‐terminated poly(ethylene glycol) (A‐PEG) to give PCL‐g‐PEG amphiphilic graft copolymers. The composition and the graft architecture of the copolymers were characterized by ¹H NMR, FTIR, and GPC analyses. These amphiphilic graft copolymers could self‐assemble into sphere‐like aggregates in aqueous solution with diverse diameters, which decreased with the increasing of grafting density. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Morphologies, crystallinity and dynamic mechanical characterizations of polypropylene/polystyrene blends compatibilized with PP-g-PS copolymer: Effect of the side chain length

PP-g-PS copolymers were synthesized with the same polypropylene (PP) backbones and various side chain lengths of PS sequences via reactive comonomer p-allyltoluene (p-AT) by Ziegler–Natta copolymerization and the subsequent living anionic graft-polymerization. ¹H NMR characterized that the PP-g-PS copolymer had grafted 3.15 side chains per 1000 carbons in the PP backbones and the length of PS sequences varied in the range of 25.8–309.9 units. PP/PS blends with the PP-g-PS copolymer as compatibilizer (wt. 75/25/5) were prepared and characterized by SEM, WAXD and DMA to investigate the morphologies, crystallinity and glass transition temperatures of the PP/PS blends. All the results pointed out that the average side chain length (GL) of the graft copolymer (GL is from 25.8 to 309.9) made great effects of the PP/PS blends, such as the PS dispersed phase, the crystallinity of the PP component and the two glass transition temperatures of the blends, which showed the same trend with the increase of the GL. Overall, only with a suitable average side chain length, the PP-g-PS copolymer could achieve optimal compatibilizing efficiency of the PP/PS blends.     

Synthesis and characterization of amphiphilic block–graft MPEG‐b‐(PαN3CL‐g‐alkyne) degradable copolymers by ring‐opening polymerization and click chemistry

A straightforward strategy is proposed for the synthesis of novel, amphiphilic block–graft MPEG‐b‐(PαN₃CL‐g‐alkyne) degradable copolymers. First, the ring‐opening polymerization of α‐chloro‐ε‐caprolactone (αClCL) was initiated by hydroxy‐terminated macroinitiator monomethoxy poly(ethylene glycol) (MPEG) with SnOct₂ as the catalyst. In a second step, pendent chlorides were converted into azides by the reaction with sodium azide. Finally, various kinds of terminal alkynes were reacted with pendent azides by copper‐catalyzed Huisgen's 1,3‐dipolar cycloaddition, and thus a “click” reaction. These copolymers were characterized by differential scanning calorimetry (DSC), ¹H NMR, IR, and gel permeation chromatography. By fixing the length of the MPEG block and increasing the length of PαClCL (or PαN₃CL) block, an increase tendency in T_gs was observed. However, the copolymers of MPEG‐b‐PαClCL and MPEG‐b‐PαN₃CL were semicrystalline when the M_n of MPEG was above 2000 g mol^?1. The block–graft copolymers formed micelles in the aqueous phase with critical micelle concentrations (CMCs) in the range of 1.4–12.0 mg L^?1 depending on the composition of polymers. The lengths of hydrophilic segment influence the shape of the micelle. The mean hydrodynamic diameters of the micelles from dynamic light scattering were in the range of 90–160 nm. In vitro hydrolytic degradation of block–graft copolymers is faster than the corresponding block copolymers. The drug entrapment efficiency and the drug loading content of micelles depending on the composition of block–graft polymers were described. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4320–4331, 2008     

Polymersome‐forming amphiphilic glycosylated polymers: Synthesis and characterization

Copper‐catalyzed azide‐alkyne cycloaddition (CuAAC) was used to prepare glycosylated polyethylene (PE)–poly(ethylene glycol) (PEG) amphiphilic block copolymers. The synthetic approach involves preparation of alkyne‐terminated PE‐b‐PEG followed by CuAAC reaction with different azide functionalized sugars. The alkyne‐terminated PE‐b‐PEG was prepared by etherification reaction between hydroxyl‐terminated PE‐b‐PEG (M_n ～ 875 g mol^?1) and propargyl bromide and azidoethyl glycosides were prepared by glycosylation of 2‐azidoethanol. Atmospheric pressure solids analysis probe‐mass spectrometry was used as a novel solid state characterization tool to determine the outcome of the CuAAC click reaction and end‐capping of PE‐b‐PEG by the azidoethyl glycoside group. The aqueous solution self‐assembly behavior of these amphiphilic glycosylated polymers was explored by TEM and dye solubilization studies. Carbohydrate‐bearing spherical aggregates with the ability to solubilize a hydrophobic dye were observed. The potential of these amphiphilic glycosylated polymers to self‐assemble via electro‐formation into giant carbohydrate‐bearing polymersomes was also investigated using confocal fluorescence microscopy. An initial bioactivity study of the carbohydrate‐bearing aggregates is furthermore presented. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5184–5193     

Norbornene‐functionalized PEO‐b‐PCL: A versatile platform for mikto‐arm star,umbrella‐like,and comb‐like graft copolymers

Well‐defined in‐chain norbornene‐functionalized poly(ethylene oxide)‐b‐poly(?‐caprolactone) copolymers (NB‐PEO‐b‐PCL) were synthesized from a dual clickable containing both hydroxyl‐ and alkyne‐reactive groups, namely heterofunctional norbornene 3‐exo‐(2‐exo‐(hydroxymethyl)norborn‐5‐enyl)methyl hexynoate. A range of NB‐PEO‐b‐PCL copolymers were obtained using a combination of orthogonal organocatalyzed ring‐opening polymerization (ROP) and click copper‐catalyzed azide–alkyne cycloaddition (CuAAC). Ring‐opening metathesis polymerization (ROMP) of NB‐PEO‐b‐PCL macromonomers using ruthenium‐based Grubbs’ catalysts provides comb‐like and umbrella‐like graft copolymers bearing both PEO and PCL grafts on each monomer unit. Mikto‐arm star A₂B₂ copolymers were obtained through a new strategy based on thiol–norbornene photoinitiated click chemistry between 1,3‐propanedithiol and NB‐PEO‐b‐PCL. The results demonstrate that in‐chain NB‐PEO‐b‐PCL copolymers can be used as a platform to prepare mikto‐arm star, umbrella‐, and comb‐like graft copolymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 4051–4061     

Morphology of Compatibilized Ternary Blends

In this work, the evolution of the morphology of polypropylene/polystyrene/poly(methyl metacrylate) (PP/PS/PMMA) blends to which graft copolymers polypropylene-graft-polystyrene (PP-g-PS) of 2 compositions (55/45 and 70/30), polypropylene-graft-poly(methyl metacrylate) (PP-g-PMMA), or styrene-block-(ethylene- co-butadiene)-block-styrene (SEBS) was added has been studied. The ternary blends morphologies were predicted using phenomenological models that predict the morphology of ternary blends as a function of the interfacial tension between the blend components (spreading coefficient and free energy minimization). All blends studied presented a core-shell morphology with PS as shell and PMMA as core. The addition of PP-g-PS or SEBS resulted in a reduction of the size of the PS shell phase and, the addition of PP-g-PMMA did not seem to have any effect on the diameter of PMMA. The difference observed between the different morphologies relied on the number of droplets of core within the shell. All the phenomenological models predictions corroborated the experimental results, except when PP-g-PMMA was added to the blend.     

Synthesis and characterization of xylan-graft-poly(L-lactide)

In this study, xylan extracted from chestnut sawdust was used to synthesize the copolymers of xylan-graft-poly(L-lactide) (xylan-g-PLLA) by grafting L-lactide monomer onto xylan and using 4-dimethylaminopyridine as a catalyst at 80°C. Depending on the synthesis conditions and parameters, synthesized xylan-g-PLLAs were either water-soluble which form homogeneous plastic films after drying at room temperature or water-insoluble ones which do not form films at all. A Graeco-Latin design of experiments was used to determine the effects of three factors (reaction time, amount of L-lactide, and amount of the catalyst) on the results of the grafting reaction: the degree of substitution (DS) and the degree of polymerization (DP) of the copolymers. The DS and DP determined by ¹HNMR showed that they increase according to the amount of L-lactide and decrease according to the reaction time while the catalyst had no influence on the copolymerization reaction. Grafting of PLLA onto xylan was confirmed by Fourier transform infrared (FT-IR) and ¹HNMR analyzes. FT-IR spectra showed absorption bands at 1,784?cm^?1 characteristic of the ester functions (C?O) and ¹HNMR spectra revealed signals between 1 and 2.5?ppm corresponding to the protons of the aliphatic chains. Thermal properties show that the temperatures of start of degradation of copolymers are lower than those of PLLA and xylan. The N,N-dimethylacetamide results showed that the glass transition temperature of xylan-g-PLLA film was 147°C. We found that the Young’s modulus of this film is close to that of polypropylene.     

Design and synthesis of structurally well-defined functional polypropylenes via transition metal-mediated olefin polymerization chemistry

Functionalization of polyolefins is an industrially important yet scientifically challenging research subject. This paper summarizes our recent effort to access structurally well-defined functional polypropylenes via transition metal-mediated olefin polymerization. In one approach, polypropylenes containing side chain functional groups of controlled concentrations were obtained by Ziegler-Natta-catalyzed copolymerization of propylene in combination with either living anionic or controlled radical polymerization of polar monomers. The copolymerization of propylene with 1,4-divinylbenzene using an isospecific MgCl₂-supported TiCl₄ catalyst yielded polypropylenes containing pendant styrene moieties. Both metalation reaction with n-butyllithium and hydrochlorination reaction with dry hydrogen chloride selectively and quantitatively occurred at the pendant reactive sites, generating polymeric benzyllithium and 1-chloroethylbenzene species. These species initiated living anionic polymerization of styrene (S) and atom transfer radical polymerization (in the presence of CuCl and pentamethyldiethylenetriamine) of methyl methacrylate (MMA), respectively, resulting in functional polypropylene graft copolymers (PP-g-PS and PP-g-PMMA) with controllable graft lengths. In another approach, chain end-functionalized polypropylenes containing a terminal OH-group with controlled molecular weights were directly prepared by propylene polymerization with a metallocene catalyst through a selective aluminum chain transfer reaction. Both approaches proved to be desirable polyolefin functionalization routes in terms of efficiency and polymer structure controllability.     

Synthesis of polypropylene graft copolymers by the combination of a polypropylene copolymer containing pendant vinylbenzene groups and atom transfer radical polymerization

This article discusses a facile and inexpensive reaction process for preparing polypropylene‐based graft copolymers containing an isotactic polypropylene (i‐PP) main chain and several functional polymer side chains. The chemistry involves an i‐PP polymer precursor containing several pendant vinylbenzene groups, which is prepared through the Ziegler–Natta copolymerization of propylene and 1,4‐divinylbenzene mediated by an isospecific MgCl₂‐supported TiCl₄ catalyst. The selective monoenchainment of 1,4‐divinylbenzene comonomers results in pendant vinylbenzene groups quantitatively transformed into benzyl halides by hydrochlorination. In the presence of CuCl/pentamethyldiethylenetriamine, the in situ formed, multifunctional, polymeric atom transfer radical polymerization initiators carry out graft‐from polymerization through controlled radical polymerization. Some i‐PP‐based graft copolymers, including poly(propylene‐g‐methyl methacrylate) and poly(propylene‐g‐styrene), have been prepared with controlled compositions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 429–437, 2005     

Synthesis of click‐reactive HPMA copolymers using RAFT polymerization for drug delivery applications

This study describes a versatile strategy combining reversible addition fragmentation transfer (RAFT) polymerization and click chemistry to synthesize well‐defined, reactive copolymers of N‐(2‐hydroxypropyl)methacrylamide (HPMA) for drug delivery applications. A novel azide containing monomer N‐(3‐azidopropyl)methacrylamide (AzMA) was synthesized and copolymerized with HPMA using RAFT polymerization to provide p(HPMA‐co‐AzMA) copolymers with high control of molecular weight (～10–54 kDa) and polydispersity (≤1.06). The utility of the side‐chain azide functionality by Cu(I)‐catalyzed azide‐alkyne cycloaddition (CuAAC) was demonstrated by efficient conjugation (up to 92%) of phosphocholine, a near infrared dye, and poly(ethylene glycol) (PEG) with different substitution degrees, either alone or in combination. This study introduces a novel and versatile method to synthesize well‐defined click‐reactive HPMA copolymers for preparing a panel of bioconjugates with different functionalities needed to systemically evaluate and tune the biological performance of polymer‐based drug delivery. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5091–5099     

Synthesis of azide end‐functionalized isotactic polypropylene building block and renewed modular synthesis of diblock copolymers of isotactic polypropylene and poly(ε‐caprolactone)

This article details a synthesis of azide end‐functionalized isotactic polypropylene (i‐PP), a unique polymeric building block that can engage in Huisgen's 1,3‐dipolar cycloaddition of azide and alkyne (click reaction) to construct well‐defined i‐PP‐based polymer architecture. Controlled, consecutive chain transfer reaction to 1,2‐bis(4‐vinylphenyl)ethane and hydrogen in metallocene‐mediated propylene polymerization catalyzed by rac‐Me₂Si(2‐Me‐4‐Ph‐Ind)₂ZrCl₂/MAO resulted in styryl‐terminated i‐PP (i‐PP‐t‐St) of controlled molecular weight. Following a regioselective hydrochlorination reaction, the terminal styryl groups were quantatively transformed to 1‐chloroethylbenzene groups, which was further reacted with NaN₃ to give i‐PP terminated with an azide group (i‐PP‐t‐N₃). Structural monitoring of the polymers through the whole transformation process using ¹H NMR and FTIR as well as GPC and DSC reveals a clean and clear formation of i‐PP‐t‐N₃ (M_n in between 10,000 and 40,000 g/mol). This clickable i‐PP building block was applied to a renewed, modular synthesis of amphiphilic i‐PP‐b‐PCL (poly(ε‐caprolactone)) diblock copolymers. Composition‐diversified, structure‐well defined diblock copolymers were obtained in high yields, confirming both the high end group selectivity as well as high reactivity of azide the clickable moiety in the i‐PP building block and the effectiveness of azide‐alkyne click reaction in constructing new i‐PP architecture. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

One‐pot preparation of ABA‐type block‐graft copolymers via a combination of “click” chemistry with atom transfer nitroxide radical coupling reaction

A new strategy for the one‐pot preparation of ABA‐type block‐graft copolymers via a combination of Cu‐catalyzed azide‐alkyne cycloaddition (CuAAC) “click” chemistry with atom transfer nitroxide radical coupling (ATNRC) reaction was reported. First, sequential ring‐opening polymerization of 4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl (GTEMPO) and 1‐ethoxyethyl glycidyl ether provided a backbone with pendant TEMPO and ethoxyethyl‐protected hydroxyl groups, the hydroxyl groups could be recovered by hydrolysis and then esterified with 2‐bromoisobutyryl bromide, the bromide groups were converted into azide groups via treatment with NaN₃. Subsequently, bromine‐containing poly(tert‐butyl acrylate) (PtBA‐Br) was synthesized by atom transfer radical polymerization. Alkyne‐containing polystyrene (PS‐alkyne) was prepared by capping polystyryl‐lithium with ethylene oxide and subsequent modification by propargyl bromide. Finally, the CuAAC and ATNRC reaction proceeded simultaneously between backbone and PtBA‐Br, PS‐alkyne. The effects of catalyst systems on one‐pot reaction were discussed. The block‐graft copolymers and intermediates were characterized by size‐exclusion chromatography, ¹H NMR, and FT‐IR in detail. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of polymer linked copper(I) bis(N‐heterocyclic carbene) mechanocatalysts

In this paper, the synthesis and characterization of a series of latent polymeric bis(N‐heterocyclic carbene) (NHC) copper(I) complexes is reported, which can be activated for the copper(I)‐catalyzed azide/alkyne cycloaddition (CuAAC) via ultrasound. To prove the influence of chain length and nature of the polymer towards the activation, poly(isobutylene) (PIB), poly(styrene) (PS) and poly(tetrahydrofuran) (PTHF) are synthesized via living polymerization techniques (LCCP, ATRP, CROP) obtaining different chain lengths (from 2500 to 9000 g/mol), followed by quaternization with N‐methylimidazole, generating the corresponding N‐methylimidazolium‐telechelic polymers. The deprotonation of these macroligands via strong bases like sodium tert‐butoxide (NaO^tBu) or potassium hexamethyldisilazide (KHMDS) yields the free N‐heterocyclic carbenes (NHCs), which are used to coordinate to tetrakis(acetonitrile)copper(I) hexafluorophosphate, forming the final polymer‐based mono‐ and bis(N‐methylimidazole‐2‐ylidene) copper(I)X complexes. The structural proof of these complexes is accomplished via ¹H‐NMR spectroscopy, MALDI‐TOF‐MS and GPC‐techniques. The activation of the copper(I) biscarbene catalysts by ultrasound is studied by GPC, revealing the cleavage of one shielding NHC‐ligand. The initial catalytic latency and the via ultrasound introduced catalytic activation is successfully demonstrated monitoring a CuAAC “click” reaction of benzyl azide and phenylacetylene by in situ ¹H‐NMR spectroscopy introducing thus “click” conversions up to 97%. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3893–3907     

Isothermal crystallization behavior of PP and PP-g-GMA copolymer at high undercooling

The study involves synthesis of polypropylene grafted with glycidyl methacrylate (PP-g-GMA) using three different initiators, benzoyl peroxide, dicumyl peroxide and tertiary butyl cumyl peroxide (TBSP). Among the peroxides used, dicumyl peroxide resulted in considerable reduction of molecular weight of the resulting graft copolymer. The melting/crystallization behavior and isothermal crystallization kinetics of PP homopolymer and PP-g-GMA copolymers were studied with differential scanning calorimetry (DSC) at high undercooling (44–60°C). The results showed that the degree of crystallinity and overall crystallization rate of copolymers is greater than that of virgin PP. Among the three initiators used, TBCP exhibited lowest half crystallization time. The isothermal crystallization kinetics of the PP and copolymers was described with the Avrami equation and Sestak-Berggren (SB) equation. The Avrami exponent n of the PP and copolymers were found to be in the range 1.03 to 1.41 at high undercooling conditions employed in this study. The agreement between the values of n calculated from SB kinetics and Avrami equation is satisfactory with few exceptions. The crystallization rate of PP-g-GMA copolymer was found to be more sensitive to temperature. The isothermally crystallized samples showed a single melting peak for PP while a double peak at lower temperature was recorded for PP-g-GMA copolymer samples. The equilibrium melting point was deduced according to Hoffman-Weeks theory. The decrease of recorded for the PP modified with GMA suggests that the thermodynamic stability of the PP crystals is influenced by the chemical interactions.     

Quantification of ATRP initiator density on polymer latex particles by fluorescence labeling technique using copper‐catalyzed azide‐alkyne cycloaddition

We developed a novel fluorescence labeling technique for quantification of surface densities of atom transfer radical polymerization (ATRP) initiators on polymer particles. The cationic P(St‐CPEM‐C₄DMAEMA) and anionic P(St‐CPEM) polymer latex particles carrying ATRP‐initiating chlorine groups were prepared by emulsifier‐free emulsion polymerization of styrene (St), 2‐(2‐chloropropionyloxy)ethyl methacrylate (CPEM), and N‐n‐butyl‐N,N‐dimethyl‐N‐(2‐methacryloyloxy)ethylammonium bromide (C₄DMAEMA). ATRP initiators on the surface of polymer particles were converted into azide groups by sodium azide, followed by fluorescent labeling with 5‐(N,N‐dimethylamino)‐N′‐(prop‐2‐yn‐1‐yl)naphthalene‐1‐sulfonamide (Dansyl‐alkyne) by copper‐catalyzed azide‐alkyne cycloaddition (CuAAC). The reaction time required for both azidation of ATRP‐initiating groups and successive fluorescence labeling of azide groups with Dansyl‐alkyne by CuAAC were investigated in detail by FTIR and fluorescence spectral measurement, respectively. The ATRP initiator densities on the cationic P(St‐CPEM‐C₄DMAEMA) and anionic P(St‐CPEM) particle surfaces were estimated to be 0.21 and 0.15 molecules nm^?2, respectively, which gave close agreement with values previously determined by a conductometric titration method. The fluorescence labeling through click chemistry proposed herein is a versatile technique to quantify the surface ATRP initiator density both on anionic and cationic polymer particles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4042–4051     

Thermal stability of ester linkage in the presence of 1,2,3‐Triazole moiety generated by click reaction

The copper(I)‐catalyzed alkyne‐azide cycloaddition (CuAAC), so‐called “click” reaction, is one of most useful synthetic strategies to connect two polymer chains. 1,2,3‐Triazole ring (TA) produced by the click reaction has good thermal and chemical stability. However, we observed that block copolymers synthesized by the click reaction showed thermal degradation to give homopolymers when they are thermally annealed at high temperature, which is required for obtaining equilibrium microdomain structure. To investigate the origin of thermal instability of block copolymers, we synthesized model polystyrenes (PSs) using systematically designed bi‐functional atom transfer radical polymerization (ATRP) initiators containing TA. PS including both ester and TA groups showed thermal decomposition at relatively low temperature (e.g., 140 °C). MALDI‐TOF analysis clearly demonstrated that the cleavage site is the ester group adjacent to TA. We also found that the bromine group located at the polymer chain end plays an important role in pyrolysis of ester groups at low temperature. The pyrolysis occurs by syn‐elimination of the ester group. This result implies that the phase behavior of block copolymer synthesized by click reaction should be carefully investigated when high temperature thermal annealing is required. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 427–436