Preparation of polyethylene block copolymers by a combination of postmetallocene catalysis of ethylene polymerization and atom transfer radical polymerization

The synthesis of block copolymers consisting of a polyethylene segment and either a poly(meth)acrylate or polystyrene segment was accomplished through the combination of postmetallocene-mediated ethylene polymerization and subsequent atom transfer radical polymerization. A vinyl-terminated polyethylene (number-average molecular weight = 1800, weight-average molecular weight/number-average molecular weight =1.70) was synthesized by the polymerization of ethylene with a phenoxyimine zirconium complex as a catalyst activated with methylalumoxane (MAO). This polyethylene was efficiently converted into an atom transfer radical polymerization macroinitiator by the addition of α-bromoisobutyric acid to the vinyl chain end, and the polyethylene macroinitiator was used for the atom transfer radical polymerization of n-butyl acrylate, methyl methacrylate, or styrene; this resulted in defined polyethylene-b-poly(n-butyl acrylate), polyethylene-b-poly(methyl methacrylate), and polyethylene-b-polystyrene block copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 496–504, 2004     

Grafting copolymerization of vinyl monomers on polyimide macroinitiators by the method of atom transfer radical polymerization

Graft copolymers with the main polyimide chain and side chains of poly(n-butyl acrylate), poly(tert-butyl acrylate), poly(methyl methacrylate), poly(tert-butyl methacrylate), polystyrene, and polystyrene-block-poly(methyl methacrylate) were synthesized by atom transfer radical polymerization on the multicenter polyimide macroinitiators in the presence of the halide complexes of univalent copper with nitrogen-containing ligands. Polymerization of metha-crylates is most efficiently developed on the polyimide macroinitiators. The obtained graft copolymers initiate the secondary polymerization (“post-polymerization”) of methyl methacrylate. The conditions of detachment of side chains of graft polymethacrylates that do not involve the ester groups of their monomeric units were found. The molecular mass characteristics of the graft copolymers and isolated polymers, being the detached side chains of the copolymers, were determined. The detached side chains of different chemical structures have low values of the polydispersity index. The procedure developed was used for the preparation of new graft polyimides with side chains of poly-4-nitro-4′-[N-methylacryloyloxyethyl-N′-ethyl]amino-azobenzene that cause the nonlinear optical properties and with the side chains of poly(N,N-dimethylaminoethyl methacrylate) that cause the thermosensitive properties of the copolymers.     

Design and synthesis of structurally well-defined functional polypropylenes via transition metal-mediated olefin polymerization chemistry

Functionalization of polyolefins is an industrially important yet scientifically challenging research subject. This paper summarizes our recent effort to access structurally well-defined functional polypropylenes via transition metal-mediated olefin polymerization. In one approach, polypropylenes containing side chain functional groups of controlled concentrations were obtained by Ziegler-Natta-catalyzed copolymerization of propylene in combination with either living anionic or controlled radical polymerization of polar monomers. The copolymerization of propylene with 1,4-divinylbenzene using an isospecific MgCl₂-supported TiCl₄ catalyst yielded polypropylenes containing pendant styrene moieties. Both metalation reaction with n-butyllithium and hydrochlorination reaction with dry hydrogen chloride selectively and quantitatively occurred at the pendant reactive sites, generating polymeric benzyllithium and 1-chloroethylbenzene species. These species initiated living anionic polymerization of styrene (S) and atom transfer radical polymerization (in the presence of CuCl and pentamethyldiethylenetriamine) of methyl methacrylate (MMA), respectively, resulting in functional polypropylene graft copolymers (PP-g-PS and PP-g-PMMA) with controllable graft lengths. In another approach, chain end-functionalized polypropylenes containing a terminal OH-group with controlled molecular weights were directly prepared by propylene polymerization with a metallocene catalyst through a selective aluminum chain transfer reaction. Both approaches proved to be desirable polyolefin functionalization routes in terms of efficiency and polymer structure controllability.     

New initiator system for the anionic polymerization of (meth)acrylates in toluene. IV. Random copolymerization of (meth)acrylates in toluene initiated by s-BuLi ligated by lithium silanolates

Copolymerization of binary mixtures of alkyl (meth)acrylates has been initiated in toluene by a mixed complex of lithium silanolate  (s-BuMe₂SiOLi) and s-BuLi (molar ratio > 21) formed in situ by reaction of s-BuLi with hexamethylcyclotrisiloxane (D₃). Fully acrylate and methacrylate copolymers, i.e., poly(methyl acrylate-co-n-butyl acrylate), poly(methyl methacrylate-co-ethyl methacrylate), poly(methyl methacrylate-co-n-butyl methacrylate), poly(methyl methacrylate-co-n-butyl methacrylate), poly(isobornyl methacrylate-co-n-butyl methacrylate), poly(isobornyl methacrylate-co-n-butyl methacrylate) of a rather narrow molecular weight distribution have been synthesized. However, copolymerization of alkyl acrylate and methyl methacrylate pairs has completely failed, leading to the selective formation of homopoly(acrylate). As result of the isotactic stereoregulation of the alkyl methacrylate polymerization by the s-BuLi/s-BuMe₂SiOLi initiator, highly isotactic random and block copolymers of (alkyl) methacrylates have been prepared and their thermal behavior analyzed. The structure of isotactic poly(ethyl methacrylate-co-methyl methacrylate) copolymers has been analyzed in more detail by Nuclear Magnetic Resonance (NMR). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2525–2535, 1999     

Synthesis and characterization of polypropylene-based block copolymers possessing polar segments via controlled radical polymerization

A new method to prepare the polypropylene (PP) macroinitiator for controlled radical polymerization was described. Bromination of terminally-unsaturated PP was carried out by using N-bromosuccinimide and 2,2′-azobis(isobutyronitrile) to give a brominated PP (PP-Br), that has allylic bromide moieties at or near the chain ends. Thus, the obtained PP-Br was successfully used as a macroinitiator for radical polymerization of styrene, methyl methacrylate, and n-butyl acrylate using a copper catalyst system. From ¹H NMR analysis, it was confirmed that the chain extension polymerization was certainly initiated from allylic bromide moieties with high efficiency, leading to the PP-based block copolymers linking the polar segment. From differential scanning calorimetry, it was observed that peak melting temperature of block copolymers was higher than that of PP-Br and the obtained PP-PS block copolymers with different compositions of each segment demonstrated the unique morphological features due to the microphase separation between both segments. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 812–823, 2009     

Heterogeneous grafting of polypropylene and physical properties of graft blends

Polypropylene powder, as formed by typical Ziegler catalysts, can conveniently be hydroperoxidized in aqueous slurry. A cationic surfactant and potassium persulfate are used to achieve wetting and initiate oxidation. It is proposed that specific reaction between the quaternary ammonium cations and persulfate anion generates a water-insoluble persulfate which decomposes to yield a hydrophobic radical species which initiates oxidation. Graft copolymers were prepared by using this polypropylene hydroperoxide, a redox catalyst, and either dimethylaminoethyl methacrylate or n-butyl acrylate. These graft copolymers, dispersed in polypropylene, form two-phase systems in the solid state. Under synthesis conditions which are believed to yield long side chains, the dispersed, more polar polymer was found in larger domains than observed with shorter side chains. Polypropylene spherulites were also distorted, although per cent crystallinity of the continuous polypropylene phase was hardly affected by the presence of graft. Mixtures of poly(propylene-g-butyl acrylate) and polypropylene are rather extensible and of low modulus. Low temperature tensile impact values are only slightly higher than for pure polypropylene. Addition of poly(butyl acrylate) to these blends increases both the low-speed modulud and high-speed tensile impact relative to the two component blends.     

SYNTHESIS OF POLYPROPYLENE-POLY(METH)ACRYLATE BLOCK COPOLYMERS USING METALLOCENE CATALYZED PROCESSES AND SUBSEQUENT ATOM TRANSFER RADICAL POLYMERIZATION

ABSTRACT

The synthesis of block copolymers containing low molar mass polypropylene and poly(meth)acrylates is reported. Vinyl-terminated polypropylene (M_n SEC=3,100; M_w/M_n=1.45) was used to prepare a macroinitiator for atom transfer radical polymerization (ATRP) via hydrosilation with 1-(2-bromoisobutyryloxy)propyl-tetramethyldisiloxane. Polar segments were then incorporated to polypropylene by chain extension using either methyl methacrylate, or n-butyl acrylate. While blocking efficiency was limited in this system, well-defined PP-b-PMMA (M_n=22,220; M_w/M_n=1.14) was obtained by extraction of unreacted polypropylene with diethyl ether.     

Synthesis of polar block grafted syndiotactic polystyrenes via a combination of iridium‐catalyzed activation of aromatic C?H bonds and atom transfer radical polymerization

A combination of iridium‐catalyzed C H activation/borylation and atom transfer radical polymerization (ATRP) was used to generate polar graft copolymers of syndiotactic polystyrene (sPS). The borylation at aromatic C H bonds of sPS and subsequent oxidation of boronate ester proceeded without negatively affecting the molecular weight properties and the tacticity of sPS. A macroinitiator suitable for ATRP could be synthesized by the esterification of 2‐bromo‐2‐methylpropionyl bromide and hydroxy‐functionalized sPS. The graft polymerizations of methyl methacrylate and tert‐butyl acrylate from the macroinitiator using ATRP afforded polar block grafted sPS materials, syndiotactic polystyrene‐graft‐poly(methyl methacrylate) (sPS‐g‐PMMA) and syndiotactic polystyrene‐graft‐poly(tert‐butyl acrylate) (sPS‐g‐PtBA). The latter was hydrolyzed to yield an amphiphilic graft copolymer, syndiotactic polystyrene‐graft‐poly(acrylic acid) (sPS‐g‐PAA). The structures of the copolymers were characterized by NMR and FTIR spectroscopies. Size exclusion chromatography and ¹H NMR spectroscopy were used to study any changes in the molecular weight properties from the parent polymer. A decrease in the hydrophobicity of the graft copolymers was confirmed by water contact angle measurements. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6655–6667, 2009     

Visible light-induced synthesis of polysulfone-based graft copolymers by a grafting from approach

The synthesis of polysulfone (PSU) graft copolymers by a two-step “grafting from” approach is described. First, a chlorofunctional PSU (PSU-Cl) is formed via chloromethylation of a commercial PSU. The formed polymers are used macroinitiator for the dimanganese decacarbonyl assisted free-radical polymerization of tert-butyl acrylate, methyl methacrylate, and styrene to give the desired graft copolymers. Moreover, amphiphilic graft copolymers are also formed via posthydrolyzation of poly(tert-butyl acrylate) containing graft copolymers. The intermediates at various stages and the ultimate graft copolymers are characterized by various analysis techniques. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 412–416     

Polyolefin graft copolymers via living polymerization techniques: Preparation of poly(n‐butyl acrylate)‐graft‐polyethylene through the combination of Pd‐mediated living olefin polymerization and atom transfer radical polymerization

Poly(n‐butyl acrylate)‐graft‐branched polyethylene was successfully prepared by the combination of two living polymerization techniques. First, a branched polyethylene macromonomer with a methacrylate‐functionalized end group was prepared by Pd‐mediated living olefin polymerization. The macromonomer was then copolymerized with n‐butyl acrylate by atom transfer radical polymerization. Gel permeation chromatography traces of the graft copolymers showed narrow molecular weight distributions indicative of a controlled reaction. At low macromonomer concentrations corresponding to low viscosities, the reactivity ratios of the macromonomer to n‐butyl acrylate were similar to those for methyl methacrylate to n‐butyl acrylate. However, the increased viscosity of the reaction solution resulting from increased macromonomer concentrations caused a lowering of the apparent reactivity ratio of the macromonomer to n‐butyl acrylate, indicating an incompatibility between nonpolar polyethylene segments and a polar poly(n‐butyl acrylate) backbone. The incompatibility was more pronounced in the solid state, exhibiting cylindrical nanoscale morphology as a result of microphase separation, as observed by atomic force microscopy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2736–2749, 2002     

Synthesis and characterization of amphiphilic heterograft copolymers with PAA and PS side chains via “Grafting from” approach

The amphiphilic heterograft copolymers poly(methyl methacrylate‐co‐2‐(2‐bromoisobutyryloxy)ethyl methacrylate)‐graft‐(poly(acrylic acid)/polystyrene) (P(MMA‐co‐BIEM)‐g‐(PAA/PS)) were synthesized successfully by the combination of single electron transfer‐living radical polymerization (SET‐LRP), single electron transfer‐nitroxide radical coupling (SET‐NRC), atom transfer radical polymerization (ATRP), and nitroxide‐mediated polymerization (NMP) via the “grafting from” approach. First, the linear polymer backbones poly(methyl methacrylate‐co‐2‐(2‐bromoisobutyryloxy)ethyl methacrylate) (P(MMA‐co‐BIEM)) were prepared by ATRP of methyl methacrylate (MMA) and 2‐hydroxyethyl methacrylate (HEMA) and subsequent esterification of the hydroxyl groups of the HEMA units with 2‐bromoisobutyryl bromide. Then the graft copolymers poly(methyl methacrylate‐co‐2‐(2‐bromoisobutyryloxy)ethyl methacrylate)‐graft‐poly(t‐butyl acrylate) (P(MMA‐co‐BIEM)‐g‐PtBA) were prepared by SET‐LRP of t‐butyl acrylate (tBA) at room temperature in the presence of 2,2,6,6‐tetramethylpiperidin‐1‐yloxyl (TEMPO), where the capping efficiency of TEMPO was so high that nearly every TEMPO trapped one polymer radicals formed by SET. Finally, the formed alkoxyamines via SET‐NRC in the main chain were used to initiate NMP of styrene and following selectively cleavage of t‐butyl esters of the PtBA side chains afforded the amphiphilic heterograft copolymers poly(methyl methacrylate‐co‐2‐(2‐bromoisobutyryloxy)ethyl methacrylate)‐graft‐(poly(t‐butyl acrylate)/polystyrene) (P(MMA‐co–BIEM)‐g‐(PtBA/PS)). The self‐assembly behaviors of the amphiphilic heterograft copolymers P(MMA‐co–BIEM)‐g‐(PAA/PS) in aqueous solution were investigated by AFM and DLS, and the results demonstrated that the morphologies of the formed micelles were dependent on the grafting density. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and morphology of polyethylene‐block‐poly(methyl methacrylate) through the combination of metallocene catalysis with living radical polymerization

Polyethylene‐block‐poly(methyl methacrylate) (PE‐b‐PMMA) was successfully synthesized through the combination of metallocene catalysis with living radical polymerization. Terminally hydroxylated polyethylene, prepared by ethylene/allyl alcohol copolymerization with a specific zirconium metallocene/methylaluminoxane/triethylaluminum catalyst system, was treated with 2‐bromoisobutyryl bromide to produce terminally esterified polyethylene (PE‐Br). With the resulting PE‐Br as an initiator for transition‐metal‐mediated living radical polymerization, methyl methacrylate polymerization was subsequently performed with CuBr or RuCl₂(PPh₃)₃ as a catalyst. Then, PE‐b‐PMMA block copolymers of different poly(methyl methacrylate) (PMMA) contents were prepared. Transmission electron microscopy of the obtained block copolymers revealed unique morphological features that depended on the content of the PMMA segment. The block copolymer possessing 75 wt % PMMA contained 50–100‐nm spherical polyethylene lamellae uniformly dispersed in the PMMA matrix. Moreover, the PE‐b‐PMMA block copolymers effectively compatibilized homopolyethylene and homo‐PMMA at a nanometer level. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3965–3973, 2003     

An efficient way to tune grafting density of well‐defined copolymers via an unusual Br‐containing acrylate monomer

A series of well‐defined amphiphilic graft copolymers, containing hydrophilic poly(acrylic acid) backbone and hydrophobic poly(butyl acrylate) side chains, were synthesized by sequential reversible addition fragmentation chain transfer (RAFT) polymerization and atom transfer radical polymerization (ATRP) without any postpolymerization functionality modification followed by selective acidic hydrolysis of poly(tert‐butyl acrylate) backbone. tert‐Butyl 2‐((2‐bromopropanoyloxy)methyl)‐acrylate was first homopolymerized or copolymerized with tert‐butyl acrylate by RAFT in a controlled way to give ATRP‐initiation‐group‐containing homopolymers and copolymers with narrow molecular weight distributions (M_w/M_n < 1.20) and their reactivity ratios were determined by Fineman‐Ross and Kelen‐Tudos methods, respectively. The density of ATRP initiation group can be regulated by the feed ratio of the comonomers. Next, ATRP of butyl acrylate was directly initiated by these macroinitiators to synthesize well‐defined poly(tert‐butyl acrylate)‐g‐poly(butyl acrylate) graft copolymers with controlled grafting densities via the grafting‐from strategy. PtBA‐based backbone was selectively hydrolyzed in acidic environment without affecting PBA side chains to provide poly(acrylic acid)‐g‐poly(butyl acrylate) amphiphilic graft copolymers. Fluorescence probe technique was used to determine the critical micelle concentrations in aqueous media and micellar morphologies are found to be spheres visualized by TEM. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2622–2630, 2010     

Synthesis of polypropylene graft copolymers by the combination of a polypropylene copolymer containing pendant vinylbenzene groups and atom transfer radical polymerization

This article discusses a facile and inexpensive reaction process for preparing polypropylene‐based graft copolymers containing an isotactic polypropylene (i‐PP) main chain and several functional polymer side chains. The chemistry involves an i‐PP polymer precursor containing several pendant vinylbenzene groups, which is prepared through the Ziegler–Natta copolymerization of propylene and 1,4‐divinylbenzene mediated by an isospecific MgCl₂‐supported TiCl₄ catalyst. The selective monoenchainment of 1,4‐divinylbenzene comonomers results in pendant vinylbenzene groups quantitatively transformed into benzyl halides by hydrochlorination. In the presence of CuCl/pentamethyldiethylenetriamine, the in situ formed, multifunctional, polymeric atom transfer radical polymerization initiators carry out graft‐from polymerization through controlled radical polymerization. Some i‐PP‐based graft copolymers, including poly(propylene‐g‐methyl methacrylate) and poly(propylene‐g‐styrene), have been prepared with controlled compositions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 429–437, 2005     

Morphology and thermomechanical properties of well-defined polyethylene-<Emphasis Type="Italic">graft</Emphasis>-poly(<Emphasis Type="Italic">n</Emphasis>-butyl acrylate) prepared by atom transfer radical polymerization

The morphology and thermomechanical properties of well-defined polyethylene-graft-poly(n-butyl acrylate) (PE-g-PBA) copolymers prepared via atom transfer radical polymerization were investigated. Differential scanning calorimetry (DSC), small angle X-ray scattering (SAXS), wide angle X-ray scattering (WAXS), dynamic mechanical measurement and large deformation tensile tests were performed on the graft copolymers and the results were compared with the behavior of the polyethylene macroinitiator. The existence of both crystalline polyethylene segments and amorphous poly(n-butyl acrylate) segments in the copolymers leads to microphase separation and unique thermomechanical behavior. Strong microphase separation was observed by DSC and X-ray diffraction studies. Correlation of morphology and thermomechanical properties was also studied using dynamic mechanical measurement and large deformation tensile tests.Dedicated to Prof. E. W. Fischer on the occasion of his 75th birthday     

Convenient synthesis of thermo‐responsive PtBA‐g‐PPEGMEMA well‐defined amphiphilic graft copolymer without polymeric functional group transformation

A series of well‐defined amphiphilic graft copolymers bearing hydrophobic poly(tert‐butyl acrylate) backbone and hydrophilic poly[poly(ethylene glycol) methyl ether methacrylate)] (PPEGMEMA) side chains were synthesized by sequential reversible addition fragmentation chain transfer (RAFT) polymerization and single‐electron‐transfer living radical polymerization (SET‐LRP) without any polymeric functional group transformation. A new Br‐containing acrylate monomer, tert‐butyl 2‐((2‐bromoisobutanoyloxy)methyl)acrylate (tBBIBMA), was first prepared, which can be homopolymerized by RAFT to give a well‐defined PtBBIBMA homopolymer with a narrow molecular weight distribution (M_w/M_n = 1.15). This homopolymer with pendant Br initiation group in every repeating unit initiated SET‐LRP of PEGMEMA at 45 °C using CuBr/dHbpy as catalytic system to afford well‐defined PtBBIBMA‐g‐PPEGMEMA graft copolymers via the grafting‐from strategy. The self‐assembly behavior of the obtained graft copolymers in aqueous media was investigated by fluorescence spectroscopy and TEM. These copolymers were found to be stimuli‐responsive to both temperature and ions. Finally, poly(acrylic acid)‐g‐PPEGMEMA double hydrophilic graft copolymers were obtained by selective acidic hydrolysis of hydrophobic PtBA backbone while PPEGMEMA side chains kept inert. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of poly(β‐pinene)‐g‐poly(meth)acrylate by the combination of living cationic polymerization and atom transfer radical polymerization

New graft copolymers of β‐pinene with methyl methacrylate (MMA) or butyl acrylate (BA) were synthesized by the combination of living cationic polymerization and atom transfer radical polymerization (ATRP). β‐Pinene polymers with predetermined molecular weights and narrow molecular weight distributions (MWDs) were prepared by living cationic polymerization with the 1‐phenylethyl chloride/TiCl₄/Ti(OiPr)₄/nBu₄NCl initiating system, and the resultant polymers were brominated quantitatively by N‐bromosuccinamide in the presence of azobisisobutyronitrile, yielding poly(β‐pinene) macroinitiators with different bromine contents (Br/β‐pinene unit molar ratio = 1.0 and 0.5 for macroinitiators a and b , respectively). The macroinitiators, in conjunction with CuBr and 2,2′‐bipyridine, were used to initiate ATRP of BA or MMA. With macroinitiator a or b , the bulk polymerization of BA induced a linear first‐order kinetic plot and gave graft copolymers with controlled molecular weights and MWDs; this indicated the living nature of these polymerizations. The bulk polymerization of MMA initiated with macroinitiator a was completed instantaneously and induced insoluble gel products. However, the controlled polymerization of MMA was achieved with macroinitiator b in toluene and resulted in the desired graft copolymers with controlled molecular weights and MWDs. The structures of the obtained graft copolymers of β‐pinene with (methyl)methacrylate were confirmed by ¹H NMR spectra. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1237–1242, 2003     

Thermoresponsive PPEGMEA‐g‐PPEGEEMA well‐defined double hydrophilic graft copolymer synthesized by successive SET‐LRP and ATRP

A series of well‐defined double hydrophilic graft copolymers containing poly[poly(ethylene glycol) methyl ether acrylate] (PPEGMEA) backbone and poly[poly(ethylene glycol) ethyl ether methacrylate] (PPEGEEMA) side chains were synthesized by the combination of single electron transfer‐living radical polymerization (SET‐LRP) and atom transfer radical polymerization (ATRP). The backbone was first prepared by SET‐LRP of poly(ethylene glycol) methyl ether acrylate macromonomer using CuBr/tris(2‐(dimethylamino)ethyl)amine as catalytic system. The obtained comb copolymer was treated with lithium diisopropylamide and 2‐bromoisobutyryl bromide to give PPEGMEA‐Br macroinitiator. Finally, PPEGMEA‐g‐PPEGEEMA graft copolymers were synthesized by ATRP of poly(ethylene glycol) ethyl ether methacrylate macromonomer using PPEGMEA‐Br macroinitiator via the grafting‐from route. The molecular weights of both the backbone and the side chains were controllable and the molecular weight distributions kept narrow (M_w/M_n ≤ 1.20). This kind of double hydrophilic copolymer was found to be stimuli‐responsive to both temperature and ion (0.3 M Cl^? and SO). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 647–655, 2010     

Graft copolymers of polyethylene by atom transfer radical polymerization

Poly(ethylene‐g‐styrene) and poly(ethylene‐g‐methyl methacrylate) graft copolymers were prepared by atom transfer radical polymerization (ATRP). Commercially available poly(ethylene‐co‐glycidyl methacrylate) was converted into ATRP macroinitiators by reaction with chloroacetic acid and 2‐bromoisobutyric acid, respectively, and the pendant‐functionalized polyolefins were used to initiate the ATRP of styrene and methyl methacrylate. In both cases, incorporation of the vinyl monomer into the graft copolymer increased with extent of the reaction. The controlled growth of the side chains was proved in the case of poly(ethylene‐g‐styrene) by the linear increase of molecular weight with conversion and low polydispersity (M_w /M_n < 1.4) of the cleaved polystyrene grafts. Both macroinitiators and graft copolymers were characterized by ¹H NMR and differential scanning calorimetry. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2440–2448, 2000     

Atom transfer radical polymerization of styrene and methyl methacrylate catalyzed by FeCl2/iminodiacetic acid

The atom transfer radical polymerization of styrene and methyl methacrylate with FeCl₂/iminodiacetic acid as the catalyst system in bulk was successfully implemented at 70 and 110 °C, respectively. The polymerization was controlled: the molecular weight of the resultant polymer was close to the calculated value, and the molecular weight distribution was relatively narrow (weight‐average molecular weight/number‐average molecular weight ∼ 1.5). Block copolymers of polystyrene‐b‐poly(methyl methacrylate) and poly(methyl methacrylate)‐b‐poly(methyl acrylate) were successfully synthesized, confirming the living nature of the polymerization. A small amount of water added to the reaction system increased the reaction rate and did not affect the living nature of the polymerization system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4308–4314, 2000