Solid‐State Electrochemistry and Electrochemiluminescence of Porous Thin Film of [(2,2′‐Bipyridyl)(4‐(2‐pyrrol‐1‐ylethyl)‐4′‐methyl‐2,2′‐bipyridyl)2]ruthenium(II) Monomer Precipitation

A novel fluorescent porous thin film based on the precipitation of the [(2,2′‐bipyridyl)(4‐(2‐pyrrol‐1‐ylethyl)‐4′‐methyl‐2,2′‐bipyridyl)₂]ruthenium(II) (BF₄)₂ complex (pyr‐Ru) was fabricated by easily spreading 2 µL of pyr‐Ru (1 mM in acetonitrile solution) onto the surface of a platinum electrode and drying it in ambient conditions. The morphology of the resulting pyr‐Ru thin film was characterized by scanning electron microscopy (SEM) and fluorescence microscopy. The coating exhibits fluorescent properties of the ruthenium complex and a porous structure with pore diameters of micrometers. The solid‐state electrochemistry and electrochemiluminescence behaviors of the porous pyr‐Ru thin film were investigated in aqueous solution by cyclic voltammetry and step potential.     

Template‐Free Synthesis and Mechanistic Study of Porous Three‐Dimensional Hierarchical Uranium‐Containing and Uranium Oxide Microspheres

A novel type of uranium‐containing microspheres with an urchin‐like hierarchical nano/microstructure has been successfully synthesized by a facile template‐free hydrothermal method with uranyl nitrate hexahydrate, urea, and glycerol as the uranium source, precipitating agent, and shape‐controlling agent, respectively. The as‐synthesized microspheres were usually a few micrometers in size and porous inside, and their shells were composed of nanoscale rod‐shaped crystals. The growth mechanism of the hydrothermal reaction was studied, revealing that temperature, ratios of reactants, solution pH, and reaction time were all critical for the growth. The mechanism study also revealed that an intermediate compound of 3 UO₃?NH₃?5 H₂O was first formed and then gradually converted into the final hydrothermal product. These uranium‐containing microspheres were excellent precursors to synthesize porous uranium oxide microspheres. With a suitable calcination temperature, very uniform microspheres of uranium oxides (UO_2+x, U₃O₈, and UO₃) were successfully synthesized.     

Syntheses of 3‐arm and 4‐arm star‐branched polystyrene Ru(II) complexes by the click‐to‐chelate approach

Metal template synthesis is a useful methodology to make sophisticated macromolecular architectures because of the variety of metal ion coordination. To use metal template methodology, chelating functionalities should be introduced to macromolecules before complexation. In this article, we demonstrate the click‐to‐chelate approach to install chelating functionality to polystyrene (PS) and complexation with Ru(II) ions to form 3‐arm and 4‐arm star‐branched PS Ru(II) complexes. Azide‐terminated PS (PS‐N₃) was readily prepared by atom transfer radical polymerization using 1‐bromoethylbenzene as an initiator followed by substitution of bromine by an azide group. The Cu(I)‐catalyzed 1,3‐dipolar cycloaddition of PS‐N₃ with 2‐ethynylpyridine or 2,6‐diethynylpyridine affords 2‐(1H‐1,2,3‐triazol‐4‐yl)pyridine (PS‐tapy) or 2,6‐bis(1H‐1,2,3‐triazol‐4‐yl)pyridine (PS‐bitapy) ligands bearing one or two PS chains at the first‐position of the triazole rings. Ru(II) complexes of PS‐tapy and PS‐bitapy were prepared by conventional procedure. The number‐averaged molecular weights (M_ns) of these complexes were determined to be 6740 and 10,400, respectively, by size exclusion chromatography using PS standards. These M_n values indicated the formation of 3‐arm and 4‐arm star‐branched PS Ru(II) complexes [Ru(PS‐tapy)₃](PF₆)₂ and [Ru(PS‐bitapy)₂](PF₆)₂ on the basis of the M_n values of PS‐tapy (2090) and PS‐bitapy (4970). The structures of these complexes were also confirmed by UV–vis spectroscopy and X‐ray crystallography of the Ru(II) complexes [Ru(Bn‐tapy)₃](PF₆)₂ and [Ru(Bn‐bitapy)₂](PF₆)₂, which bear a benzyl group instead of a PS chain. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

2,3‐Di(2‐pyridyl)‐5‐phenylpyrazine: A NN‐CNN‐Type Bridging Ligand for Dinuclear Transition‐Metal Complexes

A new bridging ligand, 2,3‐di(2‐pyridyl)‐5‐phenylpyrazine (dpppzH), has been synthesized. This ligand was designed so that it could bind two metals through a NN‐CNN‐type coordination mode. The reaction of dpppzH with cis‐[(bpy)₂RuCl₂] (bpy=2,2′‐bipyridine) affords monoruthenium complex [(bpy)₂Ru(dpppzH)]²⁺ ( 12+ ) in 64 % yield, in which dpppzH behaves as a NN bidentate ligand. The asymmetric biruthenium complex [(bpy)₂Ru(dpppz)Ru(Mebip)]³⁺ ( 23+ ) was prepared from complex 12+ and [(Mebip)RuCl₃] (Mebip=bis(N‐methylbenzimidazolyl)pyridine), in which one hydrogen atom on the phenyl ring of dpppzH is lost and the bridging ligand binds to the second ruthenium atom in a CNN tridentate fashion. In addition, the RuPt heterobimetallic complex [(bpy)₂Ru(dpppz)Pt(C?CPh)]²⁺ ( 42+ ) has been prepared from complex 12+ , in which the bridging ligand binds to the platinum atom through a CNN binding mode. The electronic properties of these complexes have been probed by using electrochemical and spectroscopic techniques and studied by theoretical calculations. Complex 12+ is emissive at room temperature, with an emission λ_max=695 nm. No emission was detected for complex 23+ at room temperature in MeCN, whereas complex 42+ displayed an emission at about 750 nm. The emission properties of these complexes are compared to those of previously reported Ru and RuPt bimetallic complexes with a related ligand, 2,3‐di(2‐pyridyl)‐5,6‐diphenylpyrazine.     

Efficient Noble‐Metal‐Free γ‐Fe2O3@NiO Core–Shell Nanostructured Photocatalysts for Water Oxidation

Flowerlike noble‐metal‐free γ‐Fe₂O₃@NiO core–shell hierarchical nanostructures have been fabricated and examined as a catalyst in the photocatalytic oxidation of water with [Ru(bpy)₃](ClO₄)₂ as a photosensitizer and Na₂S₂O₈ as a sacrificial electron acceptor. An apparent TOF of 0.29 μmols^?1 m^?2 and oxygen yield of 51 % were obtained with γ‐Fe₂O₃@NiO. The γ‐Fe₂O₃@NiO core–shell hierarchical nanostructures could be easily separated from the reaction solution whilst maintaining excellent water‐oxidation activity in the fourth and fifth runs. The surface conditions of γ‐Fe₂O₃@NiO also remained unchanged after the photocatalytic reaction, as confirmed by X‐ray photoelectron spectroscopy (XPS).     

Core Cross‐Linked Micelle‐Based Nanoreactors for Efficient Photocatalysis

Stable nanoscale cross‐linked polymer micelles containing Ru complexes (Ru‐CMs) were prepared from monomethoxy[poly(ethylene glycol)]‐block‐poly(L ‐lysine) (MPEG‐PLys) and [(bpy)₂Ru(fmbpy)](PF₆)₂ (bpy=bipyridine, fmbpy=5‐formy‐5′‐methyl‐2,2′‐bipyridine). To stabilize the micelles, bifunctional glutaraldehyde was used as a cross‐linker to react with the free amino groups of the PLys block. After that, the Ru‐CMs showed very good stability in common solvents. The Ru‐CMs showed photocatalytic activity and selectivity in the oxidation of sulfides that were as high as those of the well‐known [Ru(bpy)₃(PF₆)₂] complex, because the micelles were swollen in the methanol–sulfide mixture. Moreover, because of the nanoscale size of the particles and their high stability, the Ru‐CM photocatalysts can be readily recovered by ultrafiltration and reused without loss of photocatalytic activity. This work highlights the potential of using cross‐linked micelles as a platform for developing highly efficient heterogeneous photocatalysts for a number of important organic transformations.     

Polymer Structure‐Guided Self‐Assisted Preparation of Poly(ester‐thioether)‐Based Hollow Porous Microspheres and Hierarchically Interconnected Microcages for Drug Release

Porous polymer microspheres (PPMs) have been widely applied in various biomedical fields. Herein, the self‐assisted preparation of poly(ester‐thioether)‐based porous microspheres and hierarchical microcages, whose pore sizes can be controlled by varying the polymer structures, is reported. Poly(ester‐thioether)s with alkyl side chains (carbon atom numbers were 2, 4, and 8) can generate hollow porous microspheres; the longer alkyl chain length, the larger pore size of microspheres. The allyl‐modified poly(ester‐thioether) (PHBDT‐g‐C₃) can form highly open, hierarchically interconnected microcages. A formation mechanism of these PPMs is proposed; the hydrophobic side chains‐mediated stabilization of oil droplets dictate the droplet aggregation and following solvent evaporation, which is the key to the formation of PPMs. The hierarchically interconnected microcages of PHBDT‐g‐C₃ are due to the partially crosslinking of polymers. Pore sizes of PPMs can be further tuned by a simple mixing strategy of poly(ester‐thioether)s with different pore‐forming abilities. The potential application of these PPMs as H₂O₂‐responsive vehicles for delivery of hydrophobic (Nile Red) and hydrophilic (doxorubicin hydrochloride) cargos is also investigated. The microspheres with larger pore sizes show faster in vitro drug release. The poly(ester‐thioether)‐based polymer microspheres can open a new avenue for the design of PPMs and provide a H₂O₂‐responsive drug delivery platform.     

Phase‐ and Size‐Controllable Synthesis of Hexagonal Upconversion Rare‐Earth Fluoride Nanocrystals through an Oleic Acid/Ionic Liquid Two‐Phase System

Herein, we introduce a facile, user‐ and environmentally friendly (n‐octanol‐induced) oleic acid (OA)/ionic liquid (IL) two‐phase system for the phase‐ and size‐controllable synthesis of water‐soluble hexagonal rare earth (RE=La, Gd, and Y) fluoride nanocrystals with uniform morphologies (mainly spheres and elongated particles) and small sizes (<50 nm). The unique role of the IL 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BmimPF₆) and n‐octanol in modulating the phase structure and particle size are discussed in detail. More importantly, the mechanism of the (n‐octanol‐induced) OA/IL two‐phase system, the formation of the RE fluoride nanocrystals, and the distinctive size‐ and morphology‐controlling capacity of the system are presented. BmimPF₆ is versatile in term of crystal‐phase manipulation, size and shape maintenance, and providing water solubility in a one‐step reaction. The luminescent properties of Er³⁺‐, Ho³⁺‐, and Tm³⁺‐doped LaF₃, NaGdF₄, and NaYF₄ nanocrystals were also studied. It is worth noting that the as‐prepared products can be directly dispersed in water due to the hydrophilic property of Bmim⁺ (cationic part of the IL) as a capping agent. This advantageous feature has made the IL‐capped products favorable in facile surface modifications, such as the classic Stober method. Finally, the cytotoxicity evaluation of NaYF₄:Yb,Er nanocrystals before and after silica coating was conducted for further biological applications.     

Visible‐Light‐Driven,Tunable, Photoelectrochemical Performance of a Series of Metal‐Chelate,Dye‐Organized,Crystalline, CdS Nanoclusters

CdS nanoclusters of four different sizes were integrated with ruthenium‐complex dyes. The cluster–dye crystalline composites, [Cd₄(SPh)₁₀][Ru(bpy)₃], [Cd₈S(SPh)₁₆][Ru(bpy)₃], [Cd₈S(SPh)₁₃?Cl?(CH₃OCS₂)₂][Ru(phen)₃], [Cd₁₇S₄(SPh)₂₈][Ru(bpy)₃], and [Cd₃₂S₁₄(SPh)₄₀][Ru(phen)₃]₂ (phen=1,10‐phenanthroline and bpy=bipyridine), show intense absorption in the visible‐light region. They also exhibit size‐dependent photocurrent responses under the illumination of visible light. The photocurrent increases with increased cluster size. The dyes also have significant influence on the photocurrent generation of the composite.     

Two‐Photon Chemistry in Ruthenium 2,2′‐Bipyridyl‐Functionalized Single‐Wall Carbon Nanotubes

Ruthenium polypyridyl complexes are widely used as light harvesters in dye‐sensitized solar cells. Since one of the potential applications of single‐wall carbon nanotubes (SWCNTs) and their derived materials is their use as active components in organic and hybrid solar cells, the study of the photochemistry of SWCNTs with tethered ruthenium polypyridyl complexes is important. A water‐soluble ruthenium tris(bipyridyl) complex linked through peptidic bonds to SWCNTs (Ru‐SWCNTs) was prepared by radical addition of thiol‐terminated SWCNT to a terminal C?C double bond of a bipyridyl ligand of the ruthenium tris(bipyridyl) complex. The resulting macromolecular Ru‐SWCNT (≈500 nm, 15.6 % ruthenium complex content) was water‐soluble and was characterized by using TEM, thermogravimetric analysis, chemical analysis, and optical spectroscopy. The emission of Ru‐SWCNT is 1.6 times weaker than that of a mixture of [Ru(bpy)₃]²⁺ and SWCNT of similar concentration. Time‐resolved absorption optical spectroscopy allows the detection of the [Ru(bpy)₃]²⁺‐excited triplet and [Ru(bpy)₃]⁺. The laser flash studies reveal that Ru‐SWCNT exhibits an unprecedented two‐photon process that is enabled by the semiconducting properties of the SWCNT. Thus, the effect of the excitation wavelength and laser power on the transient spectra indicate that upon excitation of two [Ru(bpy)₃]²⁺ complexes of Ru‐SWCNT, a disproportionation process occurs leading to delayed formation of [Ru(bpy)₃]⁺ and the performance of the SWCNT as a semiconductor. This two‐photon delayed [Ru(bpy)₃]⁺ generation is not observed in the photolysis of [Ru(bpy)₃]³⁺; SWCNT acts as an electron wire or electron relay in the disproportionation of two [Ru(bpy)₃]²⁺ triplets in a process that illustrates that the SWCNT plays a key role in the process. We propose a mechanism for this two‐photon disproportionation compatible with i) the need for high laser flux, ii) the long lifetime of the [Ru(bpy)₃]²⁺ triplets, iii) the semiconducting properties of the SWNT, and iv) the energy of the HOMO/LUMO levels involved.     

Topotactic Synthesis of Phosphabenzene‐Functionalized Porous Organic Polymers: Efficient Ligands in CO2 Conversion

Progress toward the preparation of porous organic polymers (POPs) with task‐specific functionalities has been exceedingly slow—especially where polymers containing low‐oxidation phosphorus in the structure are concerned. A two‐step topotactic pathway for the preparation of phosphabenzene‐based POPs (Phos‐POPs) under metal‐free conditions is reported, without the use of unstable phosphorus‐based monomers. The synthetic route allows additional functionalities to be introduced into the porous polymer framework with ease. As an example, partially fluorinated Phos‐POPs (F‐Phos‐POPs) were obtained with a surface area of up to 591 m² g^?1. After coordination with Ru species, a Ru/F‐Phos‐POPs catalyst exhibited high catalytic efficiency in the formylation of amines (turnover frequency up to 204 h^?1) using a CO₂/H₂ mixture, in comparison with the non‐fluorinated analogue (43 h^?1) and a Au/TiO₂ heterogeneous catalysts reported previously (<44 h^?1). This work describes a practical method for synthesis of porous organic phosphorus‐based polymers with applications in transition‐metal‐based heterogeneous catalysis.     

Microwave Irradiation for the Facile Synthesis of Transition‐Metal Nanoparticles (NPs) in Ionic Liquids (ILs) from Metal–Carbonyl Precursors and Ru‐, Rh‐, and Ir‐NP/IL Dispersions as Biphasic Liquid–Liquid Hydrogenation Nanocatalysts for Cyclohexene

Stable chromium, molybdenum, tungsten, manganese, rhenium, ruthenium, osmium, cobalt, rhodium, and iridium metal nanoparticles (M‐NPs) have been reproducibly obtained by facile, rapid (3 min), and energy‐saving 10 W microwave irradiation (MWI) under an argon atmosphere from their metal–carbonyl precursors [M_x(CO)_y] in the ionic liquid (IL) 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([BMIm][BF₄]). This MWI synthesis is compared to UV‐photolytic (1000 W, 15 min) or conventional thermal decomposition (180–250 °C, 6–12 h) of [M_x(CO)_y] in ILs. The MWI‐obtained nanoparticles have a very small (<5 nm) and uniform size and are prepared without any additional stabilizers or capping molecules as long‐term stable M‐NP/IL dispersions (characterization by transmission electron microscopy (TEM), transmission electron diffraction (TED), and dynamic light scattering (DLS)). The ruthenium, rhodium, or iridium nanoparticle/IL dispersions are highly active and easily recyclable catalysts for the biphasic liquid–liquid hydrogenation of cyclohexene to cyclohexane with activities of up to 522 (mol product) (mol Ru)^?1 h^?1 and 884 (mol product) (mol Rh)^?1 h^?1 and give almost quantitative conversion within 2 h at 10 bar H₂ and 90 °C. Catalyst poisoning experiments with CS₂ (0.05 equiv per Ru) suggest a heterogeneous surface catalysis of Ru‐NPs.     

Block copolymer nanoparticles of controlled sizes via ring‐opening metathesis polymerization

This article describes the formation and characterization of self‐assembled nanoparticles of controlled sizes based on amphiphilic block copolymers synthesized by ring‐opening metathesis polymerization. We synthesized a novel hydrophobic derivative of norbornene; this monomer could be polymerized using Grubbs' catalyst [Cl₂Ru(CHPh)(PCy₃)₂] forming polymers of controlled molecular weight. We synthesized amphiphilic block copolymers of controlled composition and showed that they assemble into nanoparticles of controlled size. The nanoparticles were characterized using dynamic light scattering and transmission electron microscopy. Tuning the composition of the block copolymer enables the tuning of the diameters of the nanoparticles in the 30‐ to 80‐nm range. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3352–3359, 2004     

Biomass‐derived Nitrogen and Phosphorus Co‐doped Hierarchical Micro/mesoporous Carbon Materials for High‐performance Non‐enzymatic H2O2 Sensing

Nitrogen and phosphorus co‐doped hierarchical micro/mesoporous carbon (N,P‐MMC) was prepared by simple thermal treatment of freeze‐dried okra in the absence of any other additives. The 0.96 wt % of N and 1.47 wt % of P were simultaneously introduced into the graphitic framework of N,P‐MMC, which also possesses hierarchical porous structure with mesopores centered at 3.6 nm and micropores centered at 0.79 nm. Most importantly, N,P‐MMC carbon exhibits excellent catalytic activity for electrocatalytic reduction of H₂O₂, resulting in a new strategy to construct non‐enzymatic H₂O₂ sensor. The N,P‐MMC‐based H₂O₂ sensor displays two linear detection range about 0.1 mM–10 mM (R²=0.9993) and 20 mM–200 mM (R²=0.9989), respectively. The detection limit is estimated to be 6.8 μM at a signal‐to‐noise ratio of 3. These findings provide insights into synthesizing functional heteroatoms doped porous carbon materials for biosensing applications.     

Stable poly (ionic liquids) with unique cross‐linked mesoporous‐macroporous structure as efficient catalyst for alkylation of o‐xylene and styrene

In this work, using divinylbenzene (D), 1‐vinylimidazole (V) and 1‐vinyl‐3‐butylimidazolium bromide ([VBIM][Br]) as monomers, the binary‐monomer poly (ionic liquids) (PILs) and ternary‐monomer PILs were successfully synthesized, via hydrothermal polymerization and anion exchange, sequentially. Compared with each other, the ternary polymeric acidic IL catalyst has a clear spongy porous structure, while having a more stable macroporous structure, a larger specific surface area, more acidic groups and more active sites. Catalytic performance of catalyst was investigated through the alkylation of o‐xylene and styrene. The effect of the amount of IL added and the length of the cation chain on the ternary polymerization of acidic IL was systematically investigated. Under optimal reaction conditions (molar ratio of monomers was D:V:[VBIM][Br] = 2:1:1, the most suitable cation chain length was C₄), the synthesized MPD‐[C₄V]‐[VBIM][SO₃CF₃] has a larger specific surface area (89.47 m²/g), large pore volume (0.29 cm³/g), and abundant mesopores and macropores, which help to improve the contact between the active site and reactants. Moreover, the catalyst could maintain a relatively high conversion of styrene (99.0%), 1,2‐diphenylethane yield (98.7%) and high thermostability under reaction and be easily be divided from the solution, which is critical for heterogeneous solid catalysts.     

Methylammonium‐Mediated Evolution of Mixed‐Organic‐Cation Perovskite Thin Films: A Dynamic Composition‐Tuning Process

Methylammonium‐mediated phase‐evolution behavior of FA_1−xMA_xPbI₃ mixed‐organic‐cation perovskite (MOCP) is studied. It is found that by simply enriching the MOCP precursor solutions with excess methylammonium cations, the MOCPs form via a dynamic composition‐tuning process that is key to obtaining MOCP thin films with superior properties. This simple chemical approach addresses several key challenges, such as control over phase purity, uniformity, grain size, composition, etc., associated with the solution‐growth of MOCP thin films with targeted compositions.     

Sensitive Phenol Detection Using Tyrosinase‐Based Phenol Oxidation Combined with Redox Cycling of Catechol

This paper reports sensitive phenol detection using (i) tyrosinase (Tyr)‐based oxidation of phenol to catechol, combined with (ii) electrochemical‐chemical‐chemical (ECC) redox cycling involving Ru(NH₃)₆³⁺, catechol, and tris(2‐carboxyethyl)phosphine (TCEP). Phenol is converted into catechol by Tyr in the presence of dissolved O₂. Catechol then reacts with Ru(NH₃)₆³⁺, generating o‐benzoquinone and Ru(NH₃)₆²⁺. o‐Benzoquinone is reduced back to catechol by TCEP, and Ru(NH₃)₆²⁺ is accumulated over the course of the incubation. When Ru(NH₃)₆²⁺ is electrochemically oxidized to Ru(NH₃)₆³⁺, ECC redox cycling occurs. For simple phenol detection, bare ITO electrodes are used without modifying the electrodes with Tyr. The detection limit for phenol in tap water using Tyr‐based oxidation combined with ECC redox cycling is ca. 10^?9 M, while that using only Tyr‐based oxidation is ca. 10^?7 M.     

Self‐Organization of Honeycomb‐like Porous TiO2 Films by means of the Breath‐Figure Method for Surface Modification of Titanium Implants

This study describes a facile breath‐figure method for the preparation of honeycomb‐like porous TiO₂ films with an organometallic small‐molecule precursor. Multiple characterization techniques have been used to investigate the porous films and a mechanism for the formation process of porous TiO₂ films through the breath‐figure method is proposed. The pore size of the TiO₂ films could be modulated by varying the experimental parameters, such as the concentration of titanium n‐butoxide (TBT) solution, the content of cosolvent, and the air flow rate. In vitro cell‐culture experiments indicate that NIH 3T3 fibroblast cells seeded on the honeycomb‐like porous TiO₂ films show good adhesion, spreading, and proliferation behaviors, which suggests that honeycomb‐like porous TiO₂ films are an attractive biomaterial for surface modification of titanium and its alloys implants in tissue engineering to enhance their biocompatibility and bioactivity.     

The novel chain‐like anion ∞1[NaMo8O26(mim)2]3− in (Hmim)3[NaMo8O26(mim)2] (mim is 1‐methylimidazole)

Tris(1‐methylimidazolium) bis(1‐methylimidazole)hexacosaoxidooctamolybdatesodium, (C₄H₇N₂)₃[NaMo₈O₂₆(C₄H₆N₂)₂], prepared from an aqueous solution containing Na₂MoO₄ and 1‐methylimidazole, contains the novel chain‐like anion _∞¹[NaMo₈O₂₆(mim)₂]^{3 −} (mim is 1‐methylimidazole). The [Mo₈O₂₆(mim)₂]⁴⁻ building unit, which lies across a center of inversion, is comprised of eight edge‐sharing MoO₆ and MoO₅(N_mim) octahedra. These molybdate units are interlinked by sodium, itself exhibiting a sixfold coordination with O atoms.     

A Novel Three‐Electrode System Fabricated on Polymethyl Methacrylate for On‐Chip Electrochemical Detection

A new strategy of three‐electrode system fabrication in polymer‐based microfluidic systems is described here. Standard lithography, hot embossing and UV‐assisted thermal bonding were employed for fabrication and assembly of the microfluidic chip. For the electrode design the gold working (WE) and counter electrodes (CE) are placed inside a main channel through which the sample solution passes. A silver reference electrode (RE) is embedded in a small side channel containing KCl solution that is continuously pushed into the main channel. In the present work, the overall electrochemical set up and its microfabrication is described. Conditions including silver ion concentration, cyclic voltammetry (CV) settings, and the flow rate of KCl solution in the RE channel were optimized. The electrochemical performance of the three‐electrode system was evaluated by CV and also by amperometric oxidation of ferro hexacyanide ([Fe(CN)₆]^4?) and ruthenium bipyridyl ([Ru(bipy)₃]²⁺) at 400 mV and 1200 mV, respectively. CV analysis using ferri/ferro hexacyanide showed a stable, quasi‐reversible redox reaction at the electrodes with 96 mV peak separation and an anodic/cathodic peak ratio of 1. Amperometric analysis of the electrochemical species resulted in linear correlation between analyte concentration and current response in the range of 0.5–15 µM for [Fe(CN)₆]^4?, and 0–1000 µM for [Ru(bipy)₃]²⁺. Upon the given experimental conditions, the limit of detection was found to be 3.15 µM and 24.83 µM for [Fe(CN)₆]^4? and [Ru(bipy)₃]²⁺, respectively. As a fully integrated three‐electrode system that is fabricated on polymer substrates, it has great applications in microfluidic‐based systems requiring stable electrochemical detection.