Conjugated and Non-conjugated Polymers Containing Two-Electron Redox Dihydrophenazines for Lithium-Organic Batteries

Organic p-type cathode materials have recently attracted increasing attention due to their higher redox potentials and rate capabilities in comparison to n-type cathodes. However, most of the p-type cathodes based on one-electron redox still suffer from limited stability and low specific capacity (<150 mAh g⁻¹). Herein, two polymers, conjugated poly(diethyldihydrophenazine vinylene) ( CPP ) and non-conjugated poly(diethyldihydrophenazine ethylidene) ( NCPP ) containing two-electron redox dihydrophenazine, have been developed as p-type cathode materials. It is experimentally and theoretically found that the conjugated linkage among the redox centers in polymer CPP is more favorable for the effective charge delocalization on the conjugated polymer backbone and the sufficient oxidation in the higher potential region (3.3–4.2 V vs. Li/Li⁺). Consequently, the CPP cathode displays a higher reversible specific capacity of 184 mAh g⁻¹ with excellent cycling stability.     

Substituent effect on supercapacitive performances of conducting polymer‐based redox electrodes: Poly(3′,4′‐bis(alkyloxy) 2,2′:5′,2″‐terthiophene) derivatives

This work reports the synthesis of novel poly(3′,4′‐bis(alkyloxy)terthiophene) derivatives (PTTOBu, PTTOHex, and PTTOOct) and their supercapacitor applications as redox‐active electrodes. The terthiophene‐based conducting polymers have been derivatized with different alkyl pendant groups (butyl‐, hexyl‐, and octyl‐) to explore the effect of alkyl chain length on the surface morphologies and pseudocapacitive properties. The electrochemical performance tests have revealed that the length of alkyl substituent created a remarkable impact over the surface morphologies and charge storage properties of polymer electrodes. PTTOBu, PTTOHex, and PTTOOct‐based electrodes have reached up to specific capacitances of 94.3, 227.3, and 443 F g⁻¹ at 2.5 mA cm⁻² constant current density, respectively, in a three‐electrode configuration. Besides, these redox‐active electrodes have delivered satisfactory energy densities of 13.5, 29.3, and 60.7 W h kg⁻¹ and power densities of 0.98, 1, and 1.1 kW kg⁻¹ with good capacitance retentions after 10,000 charge/discharge cycles in symmetric solid‐state micro‐supercapacitor devices. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 480–495     

Rechargeable Aluminium–Sulfur Battery with Improved Electrochemical Performance by Cobalt-Containing Electrocatalyst

The rechargeable aluminium–sulfur (Al–S) battery is regarded as a potential alternative beyond lithium-ion battery system owing to its safety, promising energy density, and the high earth abundance of the constituent electrode materials, however, sluggish kinetic response and short life-span are the major issues that limit the battery development towards applications. In this article, we report Co^II,III as an electrochemical catalyst in the sulfur cathode that renders a reduced discharge–charge voltage hysteresis and improved capacity retention and rate capability for Al–S batteries. The structural and electrochemical analysis suggest that the catalytic effect of Co^II,III is closely associated with the formation of cobalt sulfides and the changes in the valence states of the Co^II,III during the electrochemical reactions of the sulfur species, which lead to improved reaction kinetics and sulfur utilization in the cathode. The Al–S battery, assembled with the cathode consisting of Co^II,III decorated carbon matrix, demonstrates a considerably reduced voltage hysteresis of 0.8 V, a reversible specific capacity of ≈500 mAh g⁻¹ at 1 A g⁻¹ after 200 discharge–charge cycles and of ≈300 mAh g⁻¹ at 3 A g⁻¹.     

Anion Storage Chemistry of Organic Cathodes for High-Energy and High-Power Density Divalent Metal Batteries

Multivalent batteries show promising prospects for next-generation sustainable energy storage applications. Herein, we report a polytriphenylamine (PTPAn) composite cathode capable of highly reversible storage of tetrakis(hexafluoroisopropyloxy) borate [B(hfip)₄] anions in both Magnesium (Mg) and calcium (Ca) battery systems. Spectroscopic and computational studies reveal the redox reaction mechanism of the PTPAn cathode material. The Mg and Ca cells exhibit a cell voltage >3 V, a high-power density of ∼∼3000 W kg⁻¹ and a high-energy density of ∼∼300 Wh kg⁻¹, respectively. Moreover, the combination of the PTPAn cathode with a calcium-tin (Ca−Sn) alloy anode could enable a long battery-life of 3000 cycles with a capacity retention of 60 %. The anion storage chemistry associated with dual-ion electrochemical concept demonstrates a new feasible pathway towards high-performance divalent ion batteries.     

Catalytically Active CoSe2 Supported on Nitrogen-Doped Three Dimensional Porous Carbon as a Cathode for Highly Stable Lithium-Sulfur Battery

Lithium-sulfur batteries are promising secondary energy storage devices that are mainly limited by its unsatisfactory cyclability owing to inefficient reversible conversion of sulfur and lithium sulfide on the cathode during the discharge/charging process. In this study, nitrogen-doped three-dimensional porous carbon material loaded with CoSe₂ nanoparticles (CoSe₂-PNC) is developed as a cathode for lithium-sulfur battery. A combination of CoSe₂ and nitrogen-doped porous carbon can efficiently improve the cathode activity and its conductivity, resulting in enhanced redox kinetics of the charge/discharge process. The obtained electrode exhibits a high discharge specific capacity of 1139.6 mAh g⁻¹ at a current density of 0.2 C. After 100 cycles, its capacity remained at 865.7 mAh g⁻¹ thus corresponding to a capacity retention of 75.97 %. In a long-term cycling test, discharge specific capacity of 546.7 mAh g⁻¹ was observed after 300 cycles performed at a current density of 1 C.     

A novel conjugated porous polymer based on triazine and imide as cathodes for sodium storage

Organic electrode materials have attracted more and more attention for sodium-ion batteries (SIBs) that are regarded as one of the most promising alternatives of lithium-ion batteries, because they can endure the storage of large sodium ions (with a larger radius than that of lithium ions) without obvious volume change. Herein, we report a novel conjugated porous polymer (TPIP) based on triazine and imide as cathodes material for SIBs. TPIP has abundant redox-active sites, good thermal stability (400°C) and large specific surface area (306 m² g⁻¹). As a result, TPIP electrode delivered a specific capacity of 120 mAh g⁻¹ after 50 cycles at a current density of 0.1 A g⁻¹ and 85 mAh g⁻¹ after 150 cycles at a current density of 1.0 A g⁻¹. Ex-situ X-ray photoelectron spectra and Fourier transform infrared spectra showed that the TPIP electrodes reversibly stored three sodium ions per unit through the triazine rings and half of the carbonyl groups. These results deepen our understanding of charge storage mechanisms of polymers with triazine and imide units and will provide guidance for the future design of electrode materials for high-performance SIBs.     

Molecular Tailoring of p–type Organics for Zinc Batteries with High Energy Density

P-type organic electrode materials are known for their high redox voltages and fast kinetics. However, single-electron p-type organic materials generally exhibit low capacity despite high operating voltage and stability, while some multi-electron p-type organic materials have high theoretical capacity but low stability. To address this challenge, we explore the possibility of combining single-electron and multi-electron units to create high-capacity and stable p-type organic electrodes. We demonstrate the design of a new molecule, 4,4′-(10H-phenothiazine-3,7-diyl) bis (N,N-diphenylaniline) (PTZAN), which is created by coupling the triphenylamine molecule and the phenothiazine molecule. The resulting PTZAN||Zn battery shows excellent stability (2000 cycles), high voltage (1.3 V), high capacity (145 mAh g⁻¹), and energy density of 187.2 Wh kg⁻¹. Theoretical calculations and in/ex situ analysis reveal that the charge storage of the PTZAN electrode is mainly driven by the redox of phenothiazine heterocycles and triphenylamine unit, accompanied by the combination/release of anions and Zn²⁺.     

Nitrogen-Linked Hexaazatrinaphthylene Polymer as Cathode Material in Lithium-Ion Battery

Nitrogen-linked hexaazatrinaphthylene polymer ( N²-HATN ) as organic cathode material with low HOMO–LOMO gap was synthesized and was observed to possess reversible high capacity and unexpected long-term cycling stability. The pre-treated N²-HATN and pRGO combination demonstrated good structure compatibility and the resultant cathode exhibited a constant increment of capacity during the redox cycles. The initial capacity at 0.05 A g⁻¹ was 406 mA h⁻¹ g⁻¹, and increased to 630 mA h⁻¹ g⁻¹ after 70 cycles. At 0.5 A g⁻¹ discharging rate, the capacity increased from an initial value of 186 mA h⁻¹ g⁻¹ to 588 mA h⁻¹ g⁻¹ after 1600 cycles. The pseudocapacitance-type behavior is postulated to be attributed to the structure compatibility between the active material and pRGO.     

All-Solid-State Rechargeable Air Batteries Using Dihydroxybenzoquinone and Its Polymer as the Negative Electrode

A proof-of-concept study was conducted on an all-solid-state rechargeable air battery (SSAB) using redox-active 2,5-dihydroxy-1,4-benzoquinone (DHBQ) and its polymer (PDBM) and a proton-conductive polymer (Nafion). DHBQ functioned well in the redox reaction with the solid Nafion ionomer at 0.47 and 0.57 V vs. RHE, similar to that in acid aqueous solution. The resulting air battery exhibited an open circuit voltage of 0.80 V and a discharge capacity of 29.7 mAh g_DHBQ⁻¹ at a constant current density (1 mA cm⁻²). With PDBM, the discharge capacity was much higher, 176.1 mAh g_PDBM⁻¹, because of the improved utilization of the redox-active moieties. In the rate characteristics of the SSAB-PDBM, the coulombic efficiency was 84 % at 4 C, which decreased to 66 % at 101 C. In a charge/discharge cycle test, the capacity remaining after 30 cycles was 44 %, which was able to be significantly improved, to 78 %, by tuning the Nafion composition in the negative electrode.     

Nickel tetrathiooxalate as a cathode material for potassium batteries

We report a nickel tetrathiooxalate (NiTTO) coordination polymer as a cathode material for potassium batteries. In a potential range of 1.3–3.6 V vs. K⁺/K, the specific capacity of the material is 209 mA h g^?1 at a current density of 0.1 A g^?1, which roughly corresponds to the two-electron reduction of polymer repeating units. The charge–discharge mechanisms of NiTTO in potassium cells were examined using operando Raman spectroscopy.     

Regulating Cation Interactions for Zero-Strain and High-Voltage P2-type Na2/3Li1/6Co1/6Mn2/3O2 Layered Oxide Cathodes of Sodium-Ion Batteries

Deep sodium extraction/insertion of sodium cathodes usually causes undesired Jahn–Teller distortion and phase transition, both of which will reduce structural stability and lead to poor long-cycle reliability. Here we report a zero-strain P2- Na_2/3Li_1/6Co_1/6Mn_2/3O₂ cathode, in which the lithium/cobalt substitution contributes to reinforcing the host structure by reducing the Mn³⁺/Mn⁴⁺ redox, mitigating the Jahn–Teller distortion, and minimizing the lattice change. 94.5 % of Na⁺ in the unit structure can be reversibly cycled with a charge cut-off voltage of 4.5 V (vs. Na⁺/Na). Impressively, a solid-solution reaction without phase transitions is realized upon deep sodium (de)intercalation, which poses a minimal volume deviation of 0.53 %. It attains a high discharge capacity of 178 mAh g⁻¹, a high energy density of 534 Wh kg⁻¹, and excellent capacity retention of 95.8 % at 1 C after 250 cycles.     

A Redox-Active 2D Metal–Organic Framework for Efficient Lithium Storage with Extraordinary High Capacity

Metal–organic framework cathodes usually exhibit low capacity and poor electrochemical performance for Li-ion storage owing to intrinsic low conductivity and inferior redox activity. Now a redox-active 2D copper–benzoquinoid (Cu-THQ) MOF has been synthesized by a simple solvothermal method. The abundant porosity and intrinsic redox character endow the 2D Cu-THQ MOF with promising electrochemical activity. Superior performance is achieved as a Li-ion battery cathode with a high reversible capacity (387 mA h g⁻¹), large specific energy density (775 Wh kg⁻¹), and good cycling stability. The reaction mechanism is unveiled by comprehensive spectroscopic techniques: a three-electron redox reaction per coordination unit and one-electron redox reaction per copper ion mechanism is demonstrated. This elucidatory understanding sheds new light on future rational design of high-performance MOF-based cathode materials for efficient energy storage and conversion.     

A Metal–Organic Compound as Cathode Material with Superhigh Capacity Achieved by Reversible Cationic and Anionic Redox Chemistry for High‐Energy Sodium‐Ion Batteries

Although sodium‐ion batteries (SIBs) are considered as alternatives to lithium‐ion batteries (LIBs), the electrochemical performances, in particular the energy density, are much lower than LIBs. A metal–organic compound, cuprous 7,7,8,8‐tetracyanoquinodimethane (CuTCNQ), is presented as a new kind of cathode material for SIBs. It consists of both cationic (Cu^II↔Cu^I) and anionic (TCNQ⁰↔TCNQ⁻↔ TCNQ²⁻) reversible redox reactions, delivering a discharge capacity as high as 255 mAh g⁻¹ at a current density of 20 mA g⁻¹. The synergistic effect of both redox‐active metal cations and organic anions brings an electrochemical transfer of multiple electrons. The transformation of cupric ions to cuprous ions occurs at near 3.80 V vs. Na⁺/Na, while the full reduction of TCNQ⁰ to TCNQ⁻ happens at 3.00–3.30 V. The remarkably high voltage is attributed to the strong inductive effect of the four cyano groups.     

Unravelling the Complex LiOH-Based Cathode Chemistry in Lithium–Oxygen Batteries**

The LiOH-based cathode chemistry has demonstrated potential for high-energy Li−O₂ batteries. However, the understanding of such complex chemistry remains incomplete. Herein, we use the combined experimental methods with ab initio calculations to study LiOH chemistry. We provide a unified reaction mechanism for LiOH formation during discharge via net 4 e⁻ oxygen reduction, in which Li₂O₂ acts as intermediate in low water-content electrolyte but LiHO₂ as intermediate in high water-content electrolyte. Besides, LiOH decomposes via 1 e⁻ oxidation during charge, generating surface-reactive hydroxyl species that degrade organic electrolytes and generate protons. These protons lead to early removal of LiOH, followed by a new high-potential charge plateau (1 e⁻ water oxidation). At following cycles, these accumulated protons lead to a new high-potential discharge plateau, corresponding to water formation. Our findings shed light on understanding of 4 e⁻ cathode chemistries in metal–air batteries.     

C-LiFePO4/聚三苯胺复合锂离子电池正极材料的制备与性能

通过低温溶剂热法和高温热处理技术合成了橄榄石结构的LiFePO₄/carbon (C-LiFePO₄)纳米材料. 在此基础上,通过溶液共混法制备了一种新型的聚三苯胺(PTPAn)修饰包覆的C-LiFePO₄复合锂离子电池正极材料(C-LiFePO₄/PTPAn). 利用X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、电化学阻抗谱(EIS)以及恒电流充放电等测试方法,考察PTPAn 包覆量对C-LiFePO₄/PTPAn 复合正极材料性能的影响. 结果表明：通过溶液共混法PTPAn能够致密地包覆在C-LiFePO₄表面,形成一个有效的电子/离子传输通道从而有效提高CLiFePO₄基复合材料的电化学活性. 所有样品中C-LiFePO₄/10% (w) PTPAn作为正极材料呈现出最佳的电化学性能,在0.1C倍率恒流充放电下材料首次放电比容量为154.5 mAh·g^-1,在10C高倍率恒流充放电下材料的放电比容量达到114.2 mAh·g^-1. 当C-LiFePO₄/PTPAn 复合材料表面包覆的PTPAn 含量进一步增加,复合材料的电化学性能出现下降的趋势. 电化学阻抗测试表明PTPAn包覆层明显减小了C-LiFePO₄电极的电荷转移电阻.     

Synthesis and electrochemical properties of polypyrrole-coated poly(2,5-dimercapto-1,3,4-thiadiazole)

A new composite cathode active material, conductive polypyrrole (PPy)-coated poly(2,5-dimercapto-1,3,4-thiadiazole) (PDMcT) was prepared as a thin film via the surfactant template (TFST) technique. The formation of the uniform and well-connected film on the surface of PDMcT particles was confirmed by Fourier transform infrared spectra (FT-IR) and transmission electron micrographs (TEM). By cyclic voltammetry and galvanostatic charge–discharge tests, the coated composite showed a better electrochemical performance than PDMcT, such as enhanced redox processes and improved coulumbic efficiency, etc. The electrical conductivity of the material reached to 10⁻³ S cm⁻¹ and an initial discharge capacity of 250 mAhg⁻¹ was obtained. Moreover, it showed a slower fading of discharge capacity than PDMcT when used as cathode material in secondary lithium batteries with liquid electrolyte solution.     

Direct Solar‐to‐Electrochemical Energy Storage in a Functionalized Covalent Organic Framework

A covalent organic framework integrating naphthalenediimide and triphenylamine units (NT‐COF) is presented. Two‐dimensional porous nanosheets are packed with a high specific surface area of 1276 m² g^?1. Photo/electrochemical measurements reveal the ultrahigh efficient intramolecular charge transfer from the TPA to the NDI and the highly reversible electrochemical reaction in NT‐COF. There is a synergetic effect in NT‐COF between the reversible electrochemical reaction and intramolecular charge transfer with enhanced solar energy efficiency and an accelerated electrochemical reaction. This synergetic mechanism provides the key basis for direct solar‐to‐electrochemical energy conversion/storage. With the NT‐COF as the cathode materials, a solar Li‐ion battery is realized with decreased charge voltage (by 0.5 V), increased discharge voltage (by 0.5 V), and extra 38.7 % battery efficiency.     

A High-Energy NASICON-Type Na3.2MnTi0.8V0.2(PO4)3 Cathode Material with Reversible 3.2-Electron Redox Reaction for Sodium-Ion Batteries

Na superionic conductor (NASICON) structured cathode materials with robust structural stability and large Na⁺ diffusion channels have aroused great interest in sodium-ion batteries (SIBs). However, most of NASICON-type cathode materials exhibit redox reaction of no more than three electrons per formula, which strictly limits capacity and energy density. Herein, a series of NASICON-type Na_3+xMnTi_1−xV_x(PO₄)₃ cathode materials are designed, which demonstrate not only a multi-electron reaction but also high voltage platform. With five redox couples from V^5+/4+ (≈4.1 V), Mn^4+/3+ (≈4.0 V), Mn^3+/2+ (≈3.6 V), V^4+/3+ (≈3.4 V), and Ti^4+/3+ (≈2.1 V), the optimized material, Na_3.2MnTi_0.8V_0.2(PO₄)₃, realizes a reversible 3.2-electron redox reaction, enabling a high discharge capacity (172.5 mAh g⁻¹) and an ultrahigh energy density (527.2 Wh kg⁻¹). This work sheds light on the rational construction of NASICON-type cathode materials with multi-electron redox reaction for high-energy SIBs.     

A Metal–Organic Compound as Cathode Material with Superhigh Capacity Achieved by Reversible Cationic and Anionic Redox Chemistry for High-Energy Sodium-Ion Batteries

Although sodium-ion batteries (SIBs) are considered as alternatives to lithium-ion batteries (LIBs), the electrochemical performances, in particular the energy density, are much lower than LIBs. A metal–organic compound, cuprous 7,7,8,8-tetracyanoquinodimethane (CuTCNQ), is presented as a new kind of cathode material for SIBs. It consists of both cationic (Cu^II↔Cu^I) and anionic (TCNQ⁰↔TCNQ⁻↔ TCNQ²⁻) reversible redox reactions, delivering a discharge capacity as high as 255 mAh g⁻¹ at a current density of 20 mA g⁻¹. The synergistic effect of both redox-active metal cations and organic anions brings an electrochemical transfer of multiple electrons. The transformation of cupric ions to cuprous ions occurs at near 3.80 V vs. Na⁺/Na, while the full reduction of TCNQ⁰ to TCNQ⁻ happens at 3.00–3.30 V. The remarkably high voltage is attributed to the strong inductive effect of the four cyano groups.     

电压敏感性聚三苯胺修饰隔膜用于锂硫电池过充保护

本文以三苯胺为原料,通过化学氧化法制备了具有电压敏感性的聚三苯胺(PTPAn)并将其成功应用到锂硫电池隔膜上。电导率测试结果表明,PTPAn/聚丙烯(PP)隔膜的离子电导率达1.56 mS·cm^-1;循环伏安(CV)测试结果表明,PTPAn/PP隔膜在3.5–4.2 V内具有氧化还原峰。在0.1C倍率下,采用PTPAn/PP隔膜和空白PP隔膜的锂硫电池在经200周循环后,放电比容量分别为424.8和407.2 mAh·g^-1,库伦效率分别为99.38%和98.59%,倍率测试表明(0.1C、0.2C、0.5C、1C),采用PTPAn/PP隔膜的锂硫电池在不同倍率下放电比容量均高于采用空白PP隔膜的锂硫电池。与此同时,对采用PTPAn/PP隔膜的锂硫电池进行过充实验,在第4周过充时,充电比容量为843.1 mAh·g^-1,放电比容量为839.8 mAh·g^-1;第10周过充时,充电比容量为690.2 mAh·g^-1,放电比容量为669.2 mAh·g^-1。第16周过充时,电池的充电比容量为538.7 mAh·g^-1,放电比容量为512.9 mAh·g^-1。倍率过充测试表明,经过不同倍率过充实验后,采用PTPAn/PP隔膜的锂硫电池仍能正常工作,在1C倍率下过充,电池电压稳定保持在3.9 V,充电比容量为349.8 mAh·g^-1,放电比容量为328.7 mAh·g^-1。