Total Synthesis of Dictyodendrins by the Gold-Catalyzed Cascade Cyclization of Conjugated Diynes with Pyrroles

In total and formal syntheses of dictyodendrins B, C, E, and F, the key step involved the direct construction of the pyrrolo[2,3-c]carbazole core by the gold-catalyzed annulation of a conjugated diyne with a pyrrole to form three bonds and two aromatic rings. The subsequent introduction of substituents at the C1 (Suzuki–Miyaura coupling), C2 (addition to an aldehyde), N3 (alkylation), and C5 positions (Ullman coupling) provided divergent access to dictyodendrins.     

Total Synthesis of Dictyodendrins A–F by the Gold-Catalyzed Cascade Cyclization of Conjugated Diyne with Pyrrole

The total synthesis of dictyodendrins A–F was achieved by using the gold(I)-catalyzed annulation of a conjugated diyne with N-Boc-pyrrole for direct construction of the pyrrolo[2,3-c]carbazole scaffold. Late-stage functionalization of the resulting pyrrolo[2,3-c]carbazole to introduce various substituents provided divergent access to dictyodendrins. Some dictyodendrin analogues exhibited inhibitory activities toward CDK2/CycA2 and GSK3.     

Synthesis of Dihydroindolo[2,3‐c]carbazole as Potential Telomerase Inhibitor

The dictyodendrins A–E were the first marine natural products that show inhibition of telomerase. A versatile and convergent route was described for the synthesis of derivatives of these pyrrolo[2,3‐c]carbazole alkaloids as potential inhibitors of telomerase, by cyclotrimerization [2 + 2 + 2] of ruthenium‐catalyzed diynamides diarylacetylenes.     

Coupling selectivity in the radical‐controlled oxidative polymerization of 4‐phenoxyphenol catalyzed by (1,4,7‐triisopropyl‐1,4,7‐triazacyclononane)copper(II) complex

Various effects on the coupling selectivity of the oxidative polymerization of 4‐phenoxyphenol catalyzed by (1,4,7‐triisopropyl‐1,4,7‐triazacyclononane)copper(II) halogeno complex [Cu(tacn)X₂] are described. With respect to the amount of the catalyst and the nature of the halide ion (X) of Cu(tacn)X₂, the coupling selectivity hardly changed. The Cu(tacn) catalyst possessed a turnover number greater than 1860. As the temperature of the reaction and the polarity of the reaction solvent were elevated, the C O coupling at the o‐position increased, but the C C coupling was not involved. For the polymerization in toluene at 80 °C, poly(1,4‐phenylene oxide), obtained as a methanol‐insoluble part, showed the highest number‐average molecular weight of 4000 with a melting point (T_m) of 195 °C. Only a slight change in the coupling selectivity was observed in the presence or absence of hindered amines as the base. Surprisingly, however, the C O selectivity decreased from 100 to 24% with less hindered amines, indicating that the selectivity drastically changed from a preference for C O coupling to a preference for C C coupling. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4792–4804, 2000     

Gas‐phase functionalized carbon‐carbon coupling reactions catalyzed by Ni (II) complexes

Gas‐phase C―C coupling reactions mediated by Ni (II) complexes were studied using a linear quadrupole ion trap mass spectrometer. Ternary nickel cationic carboxylate complexes, [(phen)Ni (OOCR¹)]⁺ (where phen = 1,10‐phenanthroline), were formed by electrospray ionization. Upon collision‐induced dissociation (CID), they extrude CO₂ forming the organometallic cation [(phen)Ni(R¹)]⁺, which undergoes gas‐phase ion‐molecule reactions (IMR) with acetate esters CH₃COOR² to yield the acetate complex [(phen)Ni (OOCCH₃)]⁺ and a C―C coupling product R¹‐R². These Ni(II)/phenanthroline‐mediated coupling reactions can be performed with a variety of carbon substituents R¹ and R² (sp³, sp², or aromatic), some of them functionalized. Reaction rates do not seem to be strongly dependent on the nature of the substituents, as sp³‐sp³ or sp²‐sp² coupling reactions proceed rapidly. Experimental results are supported by density functional theory calculations, which provide insights into the energetics associated with the C―C bond coupling step.     

Non‐empirical calculations of NMR indirect carbon–carbon coupling constants. Part 4: Bicycloalkanes

A systematic study of the one‐bond and long‐range J(C,C), J(C,H) and J(H,H) in the series of nine bicycloalkanes was performed at the SOPPA level with special emphasis on the coupling transmission mechanisms at bridgeheads. Many unknown couplings were predicted with high reliability. Further refinement of SOPPA computational scheme adjusted for better performance was carried out using bicyclo[1.1.1]pentane as a benchmark to investigate the influence of geometry, basis set and electronic correlation. The calculations performed demonstrated that classical ab initio SOPPA applied with the locally dense Dunning's sets augmented with inner core s‐functions used for coupled carbons and Sauer's sets augmented with tight s‐functions used for coupled hydrogens performs perfectly well in reproducing experimental values of different types of coupling constants (the estimated reliability is ca 1–2 Hz) in relatively large organic molecules of up to 11 carbon atoms. Additive coupling increments were derived for J(C,C), J(C,H) and J(H,H) based on the calculated values of coupling constants within SOPPA in the model bicycloalkanes, in reasonably good agreement with the known values obtained earlier on pure empirical grounds. Most of the bridgehead couplings in all but one bicycloalkane appeared to be essentially additive within ca 2–3 Hz while bicyclo[1.1.1]pentane demonstrated dramatic non‐additivity of ?14.5 Hz for J(C,C), +16.6 Hz for J(H,H) and ?5.5 Hz for J(C,H), in line with previous findings. Non‐additivity effects in the latter compound established at the SOPPA level should be attributed to the through‐space non‐bonded interactions at bridgeheads due to the essential overlapping of the bridgehead rear lobes which provides an additional and effective non‐bonding coupling path for the bridgehead carbons and their protons in the bicyclopentane framework. Copyright © 2003 John Wiley & Sons, Ltd.     

1,2‐, 1,7‐ and 1,12‐Dicarba‐closo‐dodecaborane(12) Derivatives Revisited by 13C NMR Spectroscopy and DFT Calculations. First Observation of Isotope‐Induced Chemical Shifts 1Δ10/11B(13C), and the Signs and Magnitudes of Coupling Constants 1J(13C,13C) and 1J(13C,11B)

The origin of broadening of ¹³C(carborane) NMR signals of 1,2‐, 1,7‐ and 1,12‐dicarba‐closo‐dodecaboranes(12) and several diphenylsilyl derivatives has been examined in detail and could be traced only partially to unresolved ¹³C–¹¹B spin‐spin coupling. Other contributions to the line widths arise from ¹³C–¹H dipole‐dipole interactions and, in particular, from isotope‐induced chemical shifts ¹Δ^10/11B(¹³C), observed here for carboranes for the first time. In the case of 1‐diphenylsilyl‐1,2‐dicarba‐closo‐dodecaborane(12), the coupling constant ¹J(¹³C,¹³C) = 9.3 Hz was measured in natural abundance of ¹³C. The small value of this coupling constant and its negative sign is predicted by calculations based on optimised structures [B3LYP/6‐311+G(d,p) level of theory] of the parent carboranes and 1‐silyl‐1,2‐dicarba‐closo‐dodecaborane(12) as a model compound [calcd. ¹J(¹³C,¹³C) = –10.5 Hz]. Calculated coupling constants ¹J(¹³C,¹¹B) are small (<7 Hz), in contrast to published assumptions, and of either sign, whereas ¹J(¹¹B,¹¹B) are all positive and range up to 15 Hz.     

Full four‐component relativistic calculations of the one‐bond 77Se–13C spin‐spin coupling constants in the series of selenium heterocycles and their parent open‐chain selenides

Four‐component relativistic calculations of ⁷⁷Se–¹³C spin–spin coupling constants have been performed in the series of selenium heterocycles and their parent open‐chain selenides. It has been found that relativistic effects play an essential role in the selenium–carbon coupling mechanism and could result in a contribution of as much as 15–25% of the total values of the one‐bond selenium–carbon spin‐spin coupling constants. In the overall contribution of the relativistic effects to the total values of ¹J(Se,C), the scalar relativistic corrections (negative in sign) by far dominate over the spin‐orbit ones (positive in sign), the latter being of less than 5%, as compared to the former (ca 20%). A combination of nonrelativistic second‐order polarization propagator approach (CC2) with the four‐component relativistic density functional theory scheme is recommended as a versatile tool for the calculation of ¹J(Se,C). Solvent effects in the values of ¹J(Se,C) calculated within the polarizable continuum model for the solvents with different dielectric constants (ε 2.2–78.4) are next to negligible decreasing negative ¹J(Se,C) in absolute value by only about 1 Hz. The use of the locally dense basis set approach applied herewith for the calculation of ⁷⁷Se–¹³C spin‐spin coupling constants is fully justified resulting in a dramatic decrease in computational cost with only 0.1–0.2‐Hz loss of accuracy. Copyright © 2014 John Wiley & Sons, Ltd.     

C?C Cross‐Coupling Reactions of O6‐Alkyl‐2‐Haloinosine Derivatives and a One‐Pot Cross‐Coupling/O6‐Deprotection Procedure

Reaction conditions for the C? C cross‐coupling of O⁶‐alkyl‐2‐bromo‐ and 2‐chloroinosine derivatives with aryl‐, hetaryl‐, and alkylboronic acids were studied. Optimization experiments with silyl‐protected 2‐bromo‐O⁶‐methylinosine led to the identification of [PdCl₂(dcpf)]/K₃PO₄ in 1,4‐dioxane as the best conditions for these reactions (dcpf=1,1′‐bis(dicyclohexylphosphino)ferrocene). Attempted O⁶‐demethylation, as well as the replacement of the C‐6 methoxy group by amines, was unsuccessful, which led to the consideration of Pd‐cleavable groups such that C? C cross‐coupling and O⁶‐deprotection could be accomplished in a single step. Thus, inosine 2‐chloro‐O⁶‐allylinosine was chosen as the substrate and, after re‐evaluation of the cross‐coupling conditions with 2‐chloro‐O⁶‐methylinosine as a model substrate, one‐step C? C cross‐coupling/deprotection reactions were performed with the O⁶‐allyl analogue. These reactions are the first such examples of a one‐pot procedure for the modification and deprotection of purine nucleosides under C? C cross‐coupling conditions.     

Room‐temperature Suzuki–Miyaura cross‐coupling reaction with α‐diimine Pd(II) catalysts

An α‐diimine Pd(II) complex containing chiral sec‐phenethyl groups, {bis[N,N′‐(4‐methyl‐2‐sec‐phenethylphenyl)imino]‐2,3‐butadiene}dichloropalladium (rac‐ C1 ), was synthesized and characterized. rac‐ C1 was applied as an efficient catalyst for the Suzuki–Miyaura cross‐coupling reaction between various aniline halides and arylboronic acid in PEG‐400–H₂O at room temperature. Among a series of aniline halides, rac‐ C1 did not catalyze the cross‐coupling of aniline chlorides and fluorides but efficiently catalyzed the cross‐coupling of aniline bromides and iodides with phenylboronic acid. The catalytic activity reduced slightly with increasing steric hindrance of the aniline bromides. The complexes {bis[N,N′‐(4‐fluoro‐2,6‐diphenylphenyl)imino]‐2,3‐butadiene}dichloropalladium and {bis[N,N′‐(4‐fluoro‐2,6‐diphenylphenyl)imino]acenaphthene}dichloropalladium were also found to be efficient catalysts for the reaction. Copyright © 2015 John Wiley & Sons, Ltd.     

One‐Pot Tandem Photoredox and Cross‐Coupling Catalysis with a Single Palladium Carbodicarbene Complex

The combination of conventional transition‐metal‐catalyzed coupling (2 e^? process) and photoredox catalysis (1 e^? process) has emerged as a powerful approach to catalyze difficult cross‐coupling reactions under mild reaction conditions. Reported is a palladium carbodicarbene (CDC) complex that mediates both a Suzuki–Miyaura coupling and photoredox catalysis for C?N bond formation upon visible‐light irradiation. These two catalytic pathways can be combined to promote both conventional transition‐metal‐catalyzed coupling and photoredox catalysis to mediate C?H arylation under ambient conditions with a single catalyst in an efficient one‐pot process.     

Modular Synthesis of Phenanthro[9,10‐c]thiophenes by a Sequence of CH Activation,Suzuki Cross‐Coupling and Photocyclization Reactions

A total number of 15 different 3,4‐diarylthiophenes were synthesized, which bear a chlorine atom in ortho‐position of one of the aryl substituents. One aryl group was introduced by an oxidative cross‐coupling reaction, involving a C?H activation at C4(3) of the thiophene core. The other aryl group was in most cases introduced by a Suzuki cross‐coupling reaction, which succeeded the oxidative cross‐coupling step. Photocyclization reactions of the 3,4‐diarylthiophenes were performed in a solvent mixture of benzene and acetonitrile (50:50 v/v) at λ=254 nm and proceeded to the title compounds in yields of 60–82 %. The selectivity of the photocyclization was determined at the ortho‐chloro‐substituted aryl ring by the position of the chlorine substituent. At the other ring, a single regioisomer was observed for phenyl and para‐substituted phenyl groups. For 2‐naphthyl and ortho‐substituted phenyl rings a clear preference was observed in favor of a major regioisomer, while meta‐substitution in the phenyl ring led to a about 1:1 mixture of 5‐ and 7‐substituted phenanthro[9,10‐c]thiophenes. Mechanistically, the photocyclization is likely to occur as a photochemically allowed, conrotatory [(4n+2)π] process accompanied by elimination of HCl. It was shown for two phenanthro[9,10‐c]thiophene products that they can be readily brominated in positions C1 and C3 (74–77 %), which in turn allows for further functionalization at these positions, for example, in the course of halogen–metal exchange and polymerization reactions.     

Difluorobenzenes revisited: an experimental and theoretical study of spin–spin coupling constants for 1,2‐, 1,3‐, and 1,4‐difluorobenzene

The experimental spin–spin coupling constants (SSCCs) for 1,3‐ and 1,4‐difluorobenzene have been determined anew, and found to be consistent with previously determined values. SSCCs for 1,2‐, 1,3‐, and 1,4‐difluorobenzene have been analyzed by comparing them with the coupling constants computed using the second‐order polarization propagator approximation (SOPPA) and the equation‐of‐motion coupled cluster singles and doubles method (EOM‐CCSD). Eighty experimental values have been analyzed using SOPPA calculations, and a subset of 40 values using both SOPPA and EOM‐CCSD approaches. One‐bond coupling constants ¹J(C? C) and ¹J(C? F) are better described by EOM‐CCSD, whereas one‐bond ¹J(C? H) values are better described by SOPPA. An empirical equation is presented which allows for the prediction of unknown coupling constants from computed SOPPA values. A similar approach may prove useful for predicting coupling constants in larger systems. Copyright © 2009 John Wiley & Sons, Ltd.     

Iron‐Catalyzed Oxidative C−C and N−N Coupling of Diarylamines and Synthesis of Spiroacridines

We describe iron‐catalyzed intermolecular oxidative coupling reactions of diarylamines to form substituted 2,2′‐bis(arylamino)biaryl compounds, tetraarylhydrazines, and 5,6‐dihydrobenzo[c ]cinnolines with the same hexadecafluorinated iron–phthalocyanine catalyst. The mild formation of C−C or N−N bonds was controlled by the use of acidic or basic additives. In contrast to most iron‐catalyzed dehydrogenative coupling reactions, ambient air could be used as the sole oxidant. Moreover, iron(III) chloride hexahydrate promoted a one‐pot coupling and subsequent intramolecular dearomative coupling to give 10H ‐spiro[acridine‐9,1′‐cyclohexa‐2′,5′‐dien‐4′‐ones].     

Configurational assignment in alkyl‐branched sugars via the geminal C,H coupling constants

The measurement of the magnitude and sign of ²J(C,H) couplings offers a reliable way to determine the absolute configuration at a carbon center in a fixed cyclic system. A decrease of the dihedral angle ? in the O—C_A—C_B—H fragment always leads to a change of the ²J(C_A,H_B) coupling to more negative values, independent of the type and position of substituents at the two carbon centers. The orientations of the two substituents at C‐3 of the epimeric pair 1 and 2 were determined unambiguously through the measurement of the geminal coupling constants between C‐3 and the hydrogen atoms at C‐2 and C‐4. In particular, ²J(C‐3,H‐2ax) with ?1.5 Hz, ? = 174° in 1 and ?6.6 Hz, ? = 47° in 2 , and ²J(C‐3,H‐4) with +1.5 Hz, ? = 175° in 1 and ?4.7 Hz, ? = 49° in 2 showed the greatest differences between the two epimers. Both couplings therefore allow the determination of the absolute configuration at C‐3. It should be noted, however, that the size of the coupling constants can be different for dihedral angles of nearly identical size, when there are different numbers of electronegative substituents on the two coupling pathways, i.e. no O‐substituent at C‐2, but one axial O‐substituent at C‐4. It becomes clear that it is not sufficient to measure the magnitude of ²J coupling constants only, but that the sign of the geminal coupling is needed to identify the absolute configuration at a chiral center. The coupling of C‐3 with H‐2eq is not useful for the determination of the configuration at C‐3, as the similarity of the dihedral angles ? (O—C‐3—C‐2—H‐2eq) (57° in 1 and 70° in 2 ) leads to identical coupling constants (?6.1 Hz) for both epimers. Copyright © 2003 John Wiley & Sons, Ltd.     

N‐Heterocyclic carbene/phosphite synergistically assisted Pd/C‐catalyzed Suzuki coupling of aryl chlorides

An N‐heterocyclic carbene and phosphite synergistically enhanced Pd/C catalyst system has been developed for Suzuki coupling of aryl chlorides and aryl boronic acids from commercially available Pd/C with sterically demanding N,N′‐bis(2,6‐diisopropylphenyl)imidazolylidene and trimethylphosphite. A remarkable increase in catalytic activity of Pd/C was observed when used along with 1 equiv. N,N′‐bis(2,6‐diisopropylphenyl)imidazolium chloride and 2 equiv. phosphite with respect to palladium in appropriate solvents that were found to play a crucial role in Pd/C‐NHC‐P(OR)₃‐catalyzed Suzuki coupling. A dramatic ortho‐substitution effect of carbonyl and nitrile groups in aryl chlorides was observed and explained by a modified quasi‐heterogeneous catalysis mechanism. The Pd/C catalyst could be easily recovered from reaction mixtures by simple filtration and only low palladium contamination was detected in the biparyl products. A practical process for the synthesis of 4‐biphenylcarbonitrile has therefore been developed using the N‐heterocyclic carbene/phosphite‐assisted Pd/C‐catalyzed Suzuki coupling. Copyright © 2013 John Wiley & Sons, Ltd.     

The Total Synthesis and Biological Assessment of trans‐Epothilone A

The total synthesis of (12S,13S)‐trans‐epothilone A ( 1a ) was achieved based on two different convergent strategies. In a first‐generation approach, construction of the C(11) C(12) bond by Pd⁰‐catalyzed Negishi‐type coupling between the C(12)‐to‐C(15) trans‐vinyl iodide 5 and the C(7)‐to‐C(11) alkyl iodide 4 preceded the (nonselective) formation of the C(6) C(7) bond by aldol reaction between the C(7)‐to‐C(15) aldehyde 25 and the dianion derived from the C(1)‐to‐C(6) acid 3 . The lack of selectivity in the aldol step was addressed in a second‐generation approach, which involved construction of the C(6) C(7) bond in a highly diastereoselective fashion through reaction between the acetonide‐protected C(1)‐to‐C(6) diol 31 (‘Schinzer's ketone') and the C(7)‐to‐C(11) aldehyde 30 . As part of this strategy, the C(11) C(12) bond was established subsequent to the critical aldol step and was based on B‐alkyl Suzuki coupling between the C(1)‐to‐C(11) fragment 40 and C(12)‐to‐C(15) trans‐vinyl iodide 5 . Both approaches converged at the stage of the 3‐O, 7‐O‐bis‐TBS‐protected seco acid 27 , which was converted to trans‐deoxyepothilone A ( 2 ) via Yamaguchi macrolactonization and subsequent deprotection. Stereoselective epoxidation of the trans C(12) C(13) bond could be achieved by epoxidation with Oxone ^® in the presence of the catalyst 1,2 : 4,5‐di‐O‐isopropylidene‐L ‐erythro‐2,3‐hexodiuro‐2,6‐pyranose ( 42a ), which provided a 8 : 1 mixture of 1a and its (12R,13R)‐epoxide isomer 1b in 27% yield (54% based on recovered starting material). The absolute configuration of 1a was established by X‐ray crystallography. Compound 1a is at least equipotent with natural epothilone A in its ability to induce tubulin polymerization and to inhibit the growth of human cancer cell lines in vitro. In contrast, the biological activity of 1b is at least two orders of magnitude lower than that of epothilone A or 1a .     

Preparation of H‐shaped ABCAB terpolymers by atom transfer radical coupling

H‐shaped ABCAB terpolymers composed of polystyrene (PS) (A), poly(ethylene oxide) (PEO) (B), and poly(tert‐butyl acrylate) (PtBA) (C) were prepared by atom transfer radical coupling reaction using ABC star terpolymers as precursors, CuBr and N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as catalysts, and nanosize copper as the reducing agent. The synthesis of 3‐miktoarm star terpolymer PS‐PEO‐(PtBA‐Br) involved following steps: (1) the preparation of PS with an active and an ethoxyethyl‐ptotected hydroxyl group at the same end; (2) the preparation of diblock copolymer PS‐b‐PEO with ethoxyethyl‐protected group at the junction point through the ring‐opening polymerization (ROP) of EO; (3) after de‐protection of ethoxyethyl group and further modification of hydroxyl group, tBA was polymerized by atom transfer radical polymerization using PS‐b‐PEO with 2‐bromoisobutyryl functional group as macroinitiator. The H‐shaped terpolymer could be successfully formed by atom transfer radical coupling reaction in the presence of small quantity of styrene, CuBr/PMDETA, and Cu at 90 °C. The copolymers were characterized by SEC, ¹H NMR, and FTIR in detail. The optimized coupling temperature is 90 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 59–68, 2009     

Synthesis of α‐(Fluorophenyl)pyridine by Palladium‐Catalyzed Cross‐Coupling Reaction

A series of α‐(fluoro‐substituted phenyl)pyridines have been synthesized by means of a palladium‐catalyzed cross‐coupling reaction between fluoro‐substituted phenylboronic acid and 2‐bromopyridine or its derivatives. The reactivities of the phenylboronic acids containing di‐ and tri‐fluoro substituents with α‐pyridyl bromide were investigated in different catalyst systems. Unsuccessful results were observed in the Pd/C and PPh₃ catalyst system due to phenylboronic acid containing electron‐withdrawing F atom(s). For the catalyst system of Pd(OAc)₂/PPh₃, the reactions gave moderate yields of 55% –80%, meanwhile, affording 10% –20% of dimerisation (self‐coupling) by‐products, but trace products were obtained in coupling with 2,4‐difluorophenylboronic acids because of steric hinderance. Pd(PPh₃)₄ was more reactive for boronic acids with sterically hindering F atom(s), and the coupling reactions gave good yields of 90% and 91% without any self‐coupling by‐product.     

Oligonucleosides with a Nucleobase‐Including Backbone,Part 1, Concept,Force‐Field Calculations,and Synthesis of Uridine‐Derived Monomers and Dimers

A new type of oligonucleosides has been devised to investigate the potential of oligonucleosides with a nucleobase‐including backbone to form homo‐ and/or heteroduplexes (cf. Fig. 2). It is characterised by ethynyl‐linkages between C(5′) and C(6) of uridine, and between C(5′) and C(8) of adenosine. Force‐field calculations and Maruzen model studies suggest that such oligonucleosides form autonomous pairing systems and hybridize with RNA. We describe the syntheses of uridine‐derived monomers, suitable for the construction of oligomers, and of a dimer. Treatment of uridine‐5′‐carbaldehyde ( 2 ) with triethylsilyl acetylide gave the diastereoisomeric propargylic alcohols 6 and 7 (1 : 2, 80%; Scheme 1). Their configuration at C(5′) was determined on the basis of NOE experiments and X‐ray crystal‐structure analysis. Iodination at C(6) of the (R)‐configured alcohol 7 by treatment with lithium diisopropylamide (LDA) and N‐iodosuccinimide (NIS) gave the iodide 17 (62%), which was silylated at O−C(5′) to yield 18 (89%; Scheme 2). C‐Desilylation of 7 with NaOH in MeOH/H₂O led to the alkyne 10 (98%); O‐silylation of 10 at O−C(5′) gave 16 (84%). Cross‐coupling of 18 and 16 yielded 63% of the dimer 19 , which was C‐desilylated to 20 in 63% yield. Cross‐coupling of 10 and the 6‐iodouridine 13 (70%), followed by treatment of the resulting dimer 14 with HF and HCl in MeCN/H₂O, gave the deprotected dimer 15 (73%).