Stabilization of Liposomes by Polyelectrolytes: Mechanism of Interaction and Role of Experimental Conditions

ζ-potential measurements on LUVs allow to evidence the influence of pH, ionic salt concentration, and polyelectrolyte charge on the interaction between polyelectrolyte (chitosan and hyaluronan) and zwitterionic lipid membrane. First, chitosan adsorption is studied: adsorption is independent on the chitosan molecular weight and corresponds to a maximum degree of decoration of 40% in surface coverage. From the dependence with pH and independence with MW, it is concluded that electrostatic interactions are responsible of chitosan adsorption which occurs flat on the external surface of the liposomes. The vesicles become positively charged in the presence of around two repeat units of chitosan added per lipid accessible polar head in acid medium down to pH = 7.2. Direct optical microscopy observations of GUVs shows a stabilization of the composite liposomes under different external stresses (pH and salt shocks) which confirms the strong electrostatic interaction between the chitosan and the lipid membrane. It is also demonstrated that the liposomes are stabilized by chitosan adsorption in a very wide range of pH (2.0 < pH < 12.0). Then, hyaluronan (HA), a negatively charged polyelectrolyte, is added to vesicles; the vesicles turn rapidly negatively charged in presence of adsorbed HA Finally, we demonstrated that hyaluronan adsorbs on positively charged chitosan-decorated liposomes at pH < 7.0 leading to charge inversion in the liposome decorated by the chitosan-hyaluronan bilayer. Our results demonstrate the adsorption of positive and/or negative polyelectrolyte at the surface of lipidic vesicles as well as their role on vesicle stabilization and charge control.     

Interactions between antimicrobial polynorbornenes and phospholipid vesicles monitored by light scattering and microcalorimetry

Antimicrobial polynorbornenes composed of facially amphiphilic monomers have been previously reported to accurately emulate the antimicrobial activity of natural host-defense peptides (HDPs). The lethal mechanism of most HDPs involves binding to the membrane surface of bacteria leading to compromised phospholipid bilayers. In this paper, the interactions between biomimetic vesicle membranes and these cationic antimicrobial polynorbornenes are reported. Vesicle dye-leakage experiments were consistent with previous biological assays and corroborated a mode of action involving membrane disruption. Dynamic light scattering (DLS) showed that these antimicrobial polymers cause extensive aggregation of vesicles without complete bilayer disintegration as observed with surfactants that efficiently solubilize the membrane. Fluorescence microscopy on vesicles and bacterial cells also showed polymer-induced aggregation of both synthetic vesicles and bacterial cells. Isothermal titration calorimetry (ITC) afforded free energy of binding values (Delta G) and polymer to lipid binding ratios, plus revealed that the interaction is entropically favorable (Delta S>0, Delta H>0). It was observed that the strength of vesicle binding was similar between the active polymers while the binding stoichiometries were dramatically different.     

Interaction of peptidomimetics with bilayer membranes: biophysical characterization and cellular uptake

Enzymatically stable cell-penetrating α-peptide/β-peptoid peptidomimetics constitute promising drug delivery vehicles for the transport of therapeutic biomacromolecules across membrane barriers. The aim of the present study was to elucidate the mechanism of peptidomimetic-lipid bilayer interactions. A series of peptidomimetics consisting of alternating cationic and hydrophobic residues displaying variation in length and N-terminal end group were applied to fluid-phase, anionic lipid bilayers, and their interaction was investigated using isothermal titration calorimetry (ITC) and ellipsometry. Titration of lipid vesicles into solutions of peptidomimetics resulted in exothermic adsorption processes, and the interaction of all studied peptidomimetics with anionic lipid membranes was found to be enthalpy-driven. The enthalpy and Gibbs free energy (ΔG) proved more favorable with increasing chain length. However, not all charges contribute equally to the interaction, as evidenced by the charge-normalized ΔG being inversely correlated to the sequence length. Ellipsometry data suggested that the hydrophobic residues also played an important role in the interaction process. Furthermore, ΔG extracted from ellipsometry data showed good agreement with that obtained with ITC. To further elucidate their interaction with biological membranes, quantitative uptake and cellular distribution were studied in proliferating HeLa cells by flow cytometry and confocal microscopy. The cellular uptake of carboxyfluorescein-labeled peptidomimetics showed a similar ranking as that obtained from the adsorbed amount, and binding energy to model membranes demonstrated that the initial interaction with the membrane is of key importance for the cellular uptake.     

Microcalorimetric and zeta potential study on binding of drugs on liposomes

In this work, isothermal titration calorimetry (ITC) combined with zeta potential measurements was used to study the binding and partitioning of three β-blockers, alprenolol, labetalol and propranolol, and the local anaesthetic tetracaine into liposomes. The thermodynamic parameters of enthalpy, entropy, the Gibbs energy and the binding constant were determined using the one site model. Furthermore, the binding constants corrected for the electrostatic contribution were used to assess the partition coefficients for the drugs. Also, the effect of the concentration, ionic strength, temperature and membrane curvature on the interaction was included in the evaluation.     

Modulation of interaction of polycations with negative unilamellar lipid vesicles

Interactions of small unilamellar negative vesicles composed of diphosphatidylglycerol (cardiolipin, CL²⁻), 20 mol%, and phosphatidylcholine (egg yolk lecithin, EL), 80 mol%, with various cationic polymers (CP) derived from poly(4-vinylpyridine) (PVP) were studied in water and water–salt solutions by means of photon correlation spectroscopy, microelectrophoresis, conductometry, and fluorescence techniques. The linear charge density and hydrophilic lipophilic balance of CPs were varied by quaternization of PVP with various amounts of different alkyl bromides (ethyl-(2), heptyl-(7), dodecyl-(12), cetyl-(16)). Substantial differences were observed in the behavior of exhaustingly N-ethylated PVP (CP2) and PVP N-ethylated to 50 mol% (CP2(50)) or 30 mol% (CP2(30)). All of them adsorb to the CL²⁻/EL vesicle membrane, neutralizing the surface negative charge and causing aggregation of the vesicles. However, CP2, a polycation with a maximum linear charge density, strongly enhances transfer of the negative lipid ions from the inner to outer bilayer leaflet, while CP2(50) and CP2(30) do not. Adsorbed CP2 does not disturb integrity of the vesicle membrane and can be completely removed from the surface of aggregated vesicles by adding a simple salt (NaCl) or a negative linear polyelectrolyte (polyacrylic acid (PAA) sodium salt). Such removal is followed by release of the original vesicles. In contrast to that, adsorbed CP2(50) or CP2(30) produce some leak through the lipid bilayer and cannot be completely desorbed either by increasing ionic strength or adding an excess of PAA. The probable reason of these differences is discussed. PVP partially N-alkylated with dodecyl or cetyl bromides (3 mol%) and then completely N-ethylated (CP2,12 and CP2,16), also having a maximum linear charge density, adsorbs to the negative vesicle surface as a result of both electrostatic binding and hydrophobic interaction. Bulky hydrocarbon pendant groups incorporate into the inner bilayer compartment. Similarly to CP2(50) and CP2(30), CP2,12 and CP2,16 cannot be removed from the surface either by adding the simple salt, or an excess of PAA. However, in contrast to CP2(50) and CP2(30), the polycations with the bulky hydrocarbon pendant groups do not cause any leak through the vesicle membrane. Finally, we have succeeded to prepare the ternary vesicles also composed of 20 mol% of CL²⁻, but partially replacing EL for polyoxyethylene 20 cetyl ether (Brij 58) (up to 30 mol%). The CL²⁻/EL/Brij vesicle carries a hydrophilic corona formed by polyoxyethylene chains exposed into water, while hydrophobic cetyl radicals are incorporated in the lipid bilayer. The CL²⁻/EL/Brij vesicles adsorb all studied CPs similar to the binary CL²⁻/EL vesicles. This means that polyoxyethylene corona is permeable for polycationic species restricting neither electrostatic binding nor incorporation of bulky hydrocarbon groups of CP2,16 into the membrane. However, the corona effectively stabilizes the CP-vesicle complexes against aggregation when the membrane surface is neutralized.     

Kinetics and enthalpy measurements of interaction between beta-amyloid and liposomes by surface plasmon resonance and isothermal titration microcalorimetry

The objective of this research is to understand the interaction mechanism of β-amyloid (Aβ) with cell and were basically divided into two parts. The first part focused on the time-dependent structural changes of Aβ (1-40) by circular dichroism (CD) spectroscopy, thioflavin T (ThT) fluorescence assay, and atomic force microscopy (AFM). The second part emphasized the kinetics and enthalpy of interaction between Aβ (1-40) and liposome by surface plasmon resonance (SPR) and isothermal titration microcalorimetry (ITC). Results obtained from CD, ThT and AFM confirmed the formation of 1 μm fibril after single day incubation. The driving force of kinetic interaction between Aβ and liposomes was revealed by SPR to be electrostatics. Further studies indicated that fresh Aβ has high GM1 affinity. Besides, addition of cholesterol to the liposome could alter membrane fluidity and affect the interactions of fresh Aβ with liposomes especially in the amount of Aβ absorbed and preserving the structure of liposome after adsorbing. Hydrophobicity was found to be the driving force leading to the interaction between Aβ fibrils and liposomes. These reactions are endothermic as supported by ITC measurements. When the composition of liposomes is zwitterionic lipids, the interaction of Aβ with liposomes is predominantly hydrophobic force. In contrast, the driving force of interaction of charged lipids with Aβ is electrostatic.     

Spontaneous formation of core/shell bimetallic nanoparticles: a calorimetric study

We showed recently that low entropy core/shell structured nanoparticles form spontaneously from the physical mixture of a dispersion of Ag nanoparticles and that of another noble metal (Rh, Pd, or Pt) at room temperature. Here we use isothermal titration calorimetry (ITC) and show that the initial step of such a spontaneous process is strongly exothermic. When the alcohol dispersion of poly(N-vinyl-2-pyrrolidone) (PVP)-protected Rh nanoparticles (average diameter 2.3 nm) was titrated into the alcoholic dispersion of PVP-protected Ag nanoparticles, a strong exothermic enthalpy change, DeltaH, was observed: DeltaH = -908 kJ/mol for Ag(S) nanoparticle (average diameter 10.8 nm) and -963 kJ/mol for Ag(L) nanoparticles (average diameter 22.5 nm). The strength of interaction increases in the order of Rh/Ag > Pd/Ag > Pt/Ag. This strong exothermic interaction is considered as a driving force to from low entropy bimetallic nanoparticles by simple mixing of two kinds of monometallic nanoparticles. We show also that exothermic interactions occur between a pair of noble metal nanoparticles themselves by using ITC.     

Solubilization of negatively charged DPPC/DPPG liposomes by bile salts

The interactions of the bile salts sodium cholate (NaC) and sodium deoxycholate (NaDC) in 0.1 M NaCl (pH 7.4) with membranes composed of 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC), 1,2-dipalmitoyl-sn-glycero-3-phosphatidylglycerol (DPPG) and mixtures of DPPC and DPPG at molar ratios of 3:1 and 1:1 were studied by means of high-sensitivity isothermal titration calorimetry (ITC), dynamic light scattering (DLS), and differential scanning calorimetry (DSC). The partition coefficients and the transfer enthalpies for the incorporation of bile salt molecules into the phospholipid membranes were determined by ITC. The vesicle-to-micelle transition was investigated by ITC, DLS, and DSC. The phase boundaries for the saturation of the vesicles and their complete solubilization established by ITC were in general agreement with DLS data, but systematic differences could be seen due to the difference in detected physical quantities. Electrostatic repulsion effects between the negatively charged bile salt molecules and the negatively charged membrane surfaces are not limiting factors for the vesicle-to-micelle transition. The membrane packing constraints of the phospholipid molecules and the associated spontaneous curvature of the vesicles play the dominant role. DPPG vesicles are transformed by the bile salts into mixed micelles more easily or similarly compared to DPPC vesicles. The saturation of mixed DPPC/DPPG vesicles requires less bile salt, but to induce the solubilization of the liposomes, significantly higher amounts of bile salt are needed compared to the concentrations required for the solubilization of the pure phospholipid systems. The different solubilization behavior of DPPC/DPPG liposomes compared to the pure liposomes could be due to a specific "extraction" of DPPG into the mixed micelles in the coexistence region.     

Vesicle--biopolymer gels: networks of surfactant vesicles connected by associating biopolymers

The effect of adding an associating biopolymer to surfactant vesicles and micelles is studied using rheology and small-angle neutron scattering (SANS). The associating polymer is obtained by randomly tethering hydrophobic alkyl chains to the backbone of the polysaccharide, chitosan. Adding this polymer to surfactant vesicles results in a gel; that is, the sample transforms from a Newtonian liquid to an elastic solid having frequency-independent dynamic shear moduli. SANS shows that the vesicles remain intact within the gel. The results suggest a gel structure in which the vesicles are connected by polymer chains into a three-dimensional network. Vesicle-polymer binding is expected to occur via the insertion of polymer hydrophobes into the vesicle bilayer. Each vesicle thus acts as a multifunctional junction in the network structure. Significantly, gel formation does not occur with the native chitosan that has no hydrophobes. Moreover, adding the hydrophobically modified chitosan to a viscous sample containing wormlike micelles increases the viscosity further but does not give rise to a gel-like response. Thus, the formation of a robust gel network requires both the presence of hydrophobes on the polymer and vesicles in solution.     

A Titration Microcalorimetric Study of the Effects of Halide Counterions on Vesicle-Forming Aggregation in Aqueous Solution of Branched-Chain Alkylpyridinium Surfactants

Titration microcalorimetry is used to study the influences of iodide, bromide, and chloride counterions on the aggregation of vesicle-forming 1-methyl-4-(2-pentylheptyl)pyridinium halide surfactants. Formation of vesicles by these surfactants was characterised using transmission electron microscopy. When the counterion is changed at 303 K through the series iodide, bromide, to chloride, the critical vesicular concentration (cvc) increases and the enthalpy of vesicle formation changes from exo- to endothermic. With increase in temperature to 333 K, vesicle formation becomes strongly exothermic. Increasing the temperature leads to a decrease in enthalpy and entropy of vesicle formation for all three surfactants. However the standard Gibbs energy for vesicle formation is, perhaps surprisingly, largely unaffected by an increase in temperature, as a consequence of a compensating change in both standard entropy and standard enthalpy of vesicle formation. Interestingly, standard isobaric heat capacities of vesicle formation are negative, large in magnitude but not strikingly dependent on the counterion. We conclude that the driving force for vesicle formation can be understood in terms of overlap of the thermally labile hydrophobic hydration shells of the alkyl chains. Copyright 2000 Academic Press.     

An isothermal titration calorimetry study of phytate binding to lysozyme

Isothermal titration calorimetry (ITC) was used to detect phytate binding to the protein lysozyme. This binding interaction was driven by electrostatic interaction between the positively charged protein and negatively charged phytate. When two phytate molecules bind to the protein, the charge on the protein is neutralised and no further binding occurs. The stoichiometry of binding provided evidence of phytate–lysozyme complex formation that was temperature dependent, being most extensive at lower temperatures. The initial stage of phytate binding to lysozyme was less exothermic than later injections and had a stoichiometry of 0.5 at 313 K, which was interpreted as phytate crosslinking two lysozyme molecules with corresponding water displacement. ITC could make a valuable in vitro assay to understanding binding interactions and complex formation that normally occur in the stomach of monogastric animals and the relevance of drinking water temperature on the extent of phytate–protein interaction. Interpretation of ITC data in terms of cooperativity is also discussed.     

Structure of self-organized multilayer nanoparticles for drug delivery

The combined use of cryo-TEM, dynamic light scattering, and small-angle X-ray and neutron scattering techniques allows a detailed structural model of complex pharmaceutical preparations of soybean lecithin/chitosan nanoparticles used as drug vectors to be worked out. Charge-driven self-organization of the lipid(-)/polysaccharide(+) vesicles occurs during rapid injection, under mechanical stirring, of an ethanol solution of soybean lecithin into a chitosan aqueous solution. We conclude that beyond the charge inversion region of the phase diagram, i.e., entering the redissolution region, the initial stages of particle formation are likely to be affected by a re-entrant condensation effect at the nanoscale. This behavior resembles that at the mesoscale which is well-known for polyion/amphiphile systems. Close to the boundary of the charge inversion region, nanoparticle formation occurs under a maximum condensation condition at the nanoscale and the complexation-aggregation process is driven toward a maximum multilamellarity. Interestingly, the formulation that maximizes vesicle multilamellarity corresponds to that displaying the highest drug loading efficiency.     

Opposite trends in thermodynamic compatibility between copolyamide and chitosan in their binary blend

Gibbs energy, enthalpy, and entropy of mixing in binary blends of chitosan with ter‐copolyamide 6/66/610 at ambient conditions have been determined over the entire concentration range using thermodynamic cycle based on dissolution of individual polymers and their blends of different composition in a common solvent – formic acid. Experimental procedure included stepwise equilibrium vapor sorption of glacial formic acid on the cast films and isothermal microcalorimetry of dissolution of these films in liquid glacial formic acid at 25 °C. Formic acid appeared to be a very good solvent for individual polymers and their blends. Flory‐Huggins interaction parameter determined from sorption isotherms was negative and varied from ?2.56 to ?1.79 depending upon blend composition. The enthalpies of dissolution of individual polymers and their blends were strongly exothermic and varied from ?200 to ?40 Joule/g. Independent thermodynamic cycles for Gibbs free energy and enthalpy remarkably revealed similar trends in concentration dependence of different thermodynamic functions of mixing between chitosan and copolyamide. At high chitosan content, the binary blend is characterized by large and negative values of Gibbs free energy, enthalpy, and entropy of mixing that provide high polymer compatibility. On the contrary, at high copolyamide content the blends are incompatible and are characterized by positive values of enthalpy, entropy, and Gibbs free energy of mixing. Such complicated thermodynamic behavior is the result of the superposition of strong molecular interactions (H‐bonds) between polymers in the blend and isothermal fusion of copolyamide crystallites. Thermodynamic analysis correlates well with the data obtained by polarized microscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2603–2613, 2007     

Interaction of dicarboxylic metalloporphyrins with liposomes. The effect of pH on membrane binding revisited

The acid-base properties of Zn-hematoporphyrin IX (ZnHP) and Zn-mesoporphyrin IX (ZnMP) and the effect of pH on their binding to liposomes have been studied. The ionization constants for the two carboxylate groups of ZnHP were calculated by principal component analysis and are 5.7 +/- 0.1 and 6.9 +/- 0.05. The neutral species and the mono- and dianionic forms all bind to liposomes, but a strong pH effect on the binding constant was observed for both the investigated compounds. We also observed a decrease in the binding of the two anionic species when the membranes carried a negative charge. These results indicate that the porphyrins partition into the membrane with their carboxylic moieties near the lipid-water interface so that their deprotonation, leading to a charged molecule, does not prevent the insertion of the tetrapyrrole ring into the lipid environment of neutral liposomes.     

Length dependence of the coil <--> beta-sheet transition in a membrane environment

The most abundant structural element in protein aggregates is the beta-sheet. Designed peptides that fold into a beta-sheet structure upon binding to lipid membranes are useful models to elucidate the thermodynamic characteristics of the random coil <-->beta-structure transition. Here, we examine the effect of strand length on the random coil <--> beta-sheet transition of the (KIGAKI)n peptide with the total chain length varying between 7 and 30 amino acids. The beta-sheet content of the peptides in the presence and absence of membranes was measured with circular dichroism spectroscopy. The peptides were titrated with small unilamellar lipid vesicles, and the thermodynamic binding parameters were determined with isothermal titration calorimetry (ITC). Membrane binding includes at least two processes, namely (i) the transfer of the peptide from the aqueous phase to the lipid surface and (ii) the conformational change from a random coil conformation to a beta-sheet structure. CD spectroscopy and ITC analysis demonstrate that beta-sheet formation depends cooperatively on the peptide chain length with a distinct increase in beta-structure for n > 10-12. Binding to the lipid membrane is an entropy-driven process as the binding enthalpy is always endothermic. The contribution of the beta-sheet folding reaction to the overall process was determined with analogues of the KIGAKI repeat where two adjacent amino acids were replaced by their D-enantiomers. The folding reaction for peptides with n >or= 12 is characterized by a negative free folding energy of DeltaG(degree)beta approximately equal -0.15 kcal/mol per amino acid residue. The folding step proper is exothermic with DeltaH(degree)(beta) approximately equal -0.2 to -0.6 kcal/mol per residue and counteracted by a negative entropy term TDeltaS(degree)(beta) = -0.1 to -0.5 kcal/mol per residue, depending on the chain length (18 相似文献   

Entropic stabilization and equilibrium size of lipid vesicles

We have studied the phase behavior of zwitterionic phospholipid dioleoylphosphatidylcholine (DOPC) vesicles (membranes) and interpreted our results using scaling arguments in combination with molecular realistic self-consistent field (SCF) calculations. DOPC membranes acquire a partial negative charge per lipid molecule at intermediate NaBr concentrations. As a result of this, dilute DOPC solutions form stable unilamellar vesicles. Both at low and high salt concentrations phase separation into a lamellar and a vesicular phase is observed. The vesicle radius decreases as a power law with decreasing lipid concentration. This power-law concentration dependence indicates that the vesicle phase is entropically stabilized; the size of the DOPC vesicles result from a competition between the bending energy and translation and undulation entropy. This scaling behavior breaks down for very small vesicles. This appears to be consistent with SCF predictions that point to the fact that in this regime the mean bending modulus kc increases with curvature. The SCF theory predicts that, at low ionic strength, the membrane stability improves when there is more charge on the lipids. Upon a decrease of the ionic strength, lipids with a full negative charge form vesicles that grow exponentially in size because the mean bending modulus increases with decreasing ionic strength. At the same time the Gaussian bending modulus becomes increasingly negative such that the overall bending energy tends to zero. This indicates that small micelles become the dominant species. The SCF theory thus predicts a catastrophic break down of giant vesicles in favor of small micelles at sufficiently low ionic strength and high charge density on the lipids.     

Interaction between water-soluble peptidic CdSe/ZnS nanocrystals and membranes: formation of hybrid vesicles and condensed lamellar phases

Due to their tunable optical properties and their well-defined nanometric size, core/shell nanocrystals (quantum dots, QDs) are extensively used for the design of biomarkers as well as for the preparation of nanostructured hybrid materials. It is thus of great interest to understand their interaction with soft lipidic membranes. Here we present the synthesis of water-soluble peptide CdSe/ZnS QDs and their interaction with the fluid lipidic membrane of vesicles. The use of short peptides results in the formation of small QDs presenting both high fluorescence quantum yield and high colloidal stability as well as a mean hydrodynamical diameter of 10 nm. Their interaction with oppositely charged vesicles of various surface charge and size results in the formation of hybrid giant or large unilamellar vesicles covered with a densely packed layer of QDs without any vesicle rupture, as demonstrated by fluorescence resonance energy transfer experiments, zetametry, and optical microscopy. The adhesion of nanocrystals onto the vesicle membrane appears to be sterically limited and induces the reversion of the surface charge of the vesicles. Therefore, their interaction with small unilamellar vesicles induces the formation of a well-defined lamellar hybrid condensed phase in which the QDs are densely packed in the plane of the layers, as shown by freeze-fracture electron microscopy and small-angle X-ray scattering. In this structure, strong undulations of the bilayer maximize the electrostatic interaction between the QDs and the bilayers, as previously observed in the case of DNA polyelectrolytes interacting with small vesicles.     

p-sulfonatocalix[8]arene and chitosan based vesicle formation studies by spectroscopic and thermal methods

p-sulfonatocalix [8]arene and chitosan based supramolecular amphiphilic vesicles were formed by electrostatic interaction between anionic character of calixarene and cationic chitosan molecules. UV–visible, fluorescence, dynamic light scattering and thermogravimetric analysis were performed for the characterization of p-SCX8 with chitosan. Increase in absorption and enhancement of fluorescence emission intensity attributed to vesicle formation between both calixarene and chitosan in aqueous media. Results obtained from size distribution curve of dynamic light scattering experiment gives clear evidence for vesicle formation at pH 4.98. Positive zeta potential values obtained from dynamic light scattering experiment gives the evidence for vesicle formation. Thermogravimetric analysis gives quantitative results for purity and stability of the vesicles. From overall studies we can conclude that degree of deacetylation as well as pH 4.98 of the solutions and anionic nature of pSCX8 plays important role in electrostatic interaction of vesicle formation.     

Network formation of catanionic vesicles and oppositely charged polyelectrolytes. Effect of polymer charge density and hydrophobic modification

In nonequimolar solutions of a cationic and an anionic surfactant, vesicles bearing a net charge can be spontaneously formed and apparently exist as thermodynamically stable aggregates. These vesicles can associate strongly with polymers in solution by means of hydrophobic and/or electrostatic interactions. In the current work, we have investigated the rheological and microstructural properties of mixtures of cationic polyelectrolytes and net anionic sodium dodecyl sulfate/didodecyldimethylammonium bromide vesicles. The polyelectrolytes consist of two cationic cellulose derivatives with different charge densities; the lowest charge density polymer contains also hydrophobic grafts, with the number of charges equal to the number of grafts. For both systems, polymer-vesicle association leads to a major increase in viscosity and to gel-like behavior, but the viscosity effects are more pronounced for the less charged, hydrophobically modified polymer. Evaluation of the frequency dependence of the storage and loss moduli for the two systems shows further differences in behavior: while the more long-lived cross-links occur for the more highly charged hydrophilic polymer, the number of cross-links is higher for the hydrophobically modified polymer. Microstructure studies by cryogenic transmission electron microscopy indicate that the two polymers affect the vesicle stability in different ways. With the hydrophobically modified polymer, the aggregates remain largely in the form of globular vesicles and faceted vesicles (polygon-shaped vesicles with largely planar regions). For the hydrophilic polycation, on the other hand, the surfactant aggregate structure is more extensively modified: first, the vesicles change from a globular to a faceted shape; second, there is opening of the bilayers leading to holey vesicles and ultimately to considerable vesicle disruption leading to planar bilayer, disklike aggregates. The faceted shape is tentatively attributed to a crystallization of the surfactant film in the vesicles. It is inferred that a hydrophobically modified polyion with relatively low charge density can better stabilize vesicles due to formation of molecularly mixed aggregates, while a hydrophilic polyion with relatively high charge density associates so strongly to the surfactant films, due to strong electrostatic interactions, that the vesicles are more perturbed and even disrupted.     

Modulation of lysozyme charge influences interaction with phospholipid vesicles

Lysozyme is a globular protein which is known to bind to negatively charged phospholipid vesicles. In order to study the relationship between charge state of the protein and its interaction with negatively charged phospholipid membranes chemical modifications of the proteins were carried out. Succinylation and carbodiimide modification was used to shift the isoelectric point of lysozyme to lower and higher pH values, respectively. The binding of the modified lysozyme to phospholipid vesicles prepared from phosphatidic acid (PA) was determined using microelectrophoresis and ultracentrifugation. At acidic pH of the solution all lysozyme species reduced the surface charges of PA vesicles. Succinylated lysozyme (succ lysozyme) reduced the electrophoretic mobility (EPM) to nearly zero, whereas native lysozyme and carboxylated lysozyme (carbo lysozyme) changed the surface charge to positive values. At neutral pH, the reduction of surface charges was less for carbo lysozyme and unmodified lysozyme. Succ lysozyme did not change the EPM. Unmodified and carbo lysozyme decreased the magnitude of EPM, but the whole complex was still negatively charged. The bound fraction of all modified lysozyme to PA vesicles at high lysozyme/PA ratios was nearly constant at acidic pH. At low lysozyme/PA ratios the extent of bound lysozyme is changed in the order carbo>unmodified>succ lysozyme. Increasing the pH, the extent of bound lysozyme to PA large unilamellar vesicles (LUV) is reduced, at pH 9.0 only 35% of carbo lysozyme, 23% of unmodified lysozyme is bound, whereas succ lysozyme does not bind at pH 7.4 and 9.0. At low pH, addition of all lysozyme species resulted in a massive aggregation of PA liposomes, at neutral pH aggregation occurs at much higher lysozyme/PA ratios. Lysozyme binding to PA vesicles is accompanied by the penetration of lysozyme into the phospholipid membrane as measured by monolayer techniques. The penetration of lysozyme into the monolayer was modulated by pH and ionic strengths. The interaction of lysozyme with negatively charged vesicles leads to a decrease of the phospholipid vesicle surface hydration as measured by the shift of the maximum of the fluorescence signal of a headgroup labeled phospholipid. The binding of bis-ANS as an additional indicator for the change of surface hydrophobicity is increased at low pH after addition of lysozyme to the vesicles. More hydrophobic patches of the lysozyme-PA complex are exposed at low pH. At low pH the binding process of lysozyme to PA vesicles is followed by an extensive intermixing of phospholipids between the aggregated vesicles, accompanied by a massive leakage of the vesicle aqueous content. The extent of lysozyme interaction with PA LUV at neutral and acidic pH is in the order carbo lysozyme>lysozyme>succ lysozyme.