Binding of chitosan to phospholipid vesicles studied with isothermal titration calorimetry

We thermodynamically characterize the interaction of chitosan with small liposomes and the binding and organization of the polysaccharide on the membrane of the vesicles. By means of isothermal titration calorimetry (ITC), we obtain the enthalpy variations arising from binding of the positively ionized chitosan to neutral and negatively charged liposomes. The strong electrostatic interaction of the polysaccharide with the negative charges at the membrane gives rise to highly exothermic signal until charge compensation is reached. The equilibrium constant, the interaction stoichiometry, and the molar enthalpy of binding chitosan monomers to phospholipids from the external leaflet of the vesicle membrane are obtained from the isotherm curve fitting assuming independent binding sites. The strong exothermic signal indicates that the electrostatically driven binding of chitosan to the membrane is energetically favored, leading to further stabilization of the vesicle suspension. The higher the net negative charge of the vesicles, the more pronounced the adsorption of chitosan is, leading to weaker chain organization of the adsorbed chitosan at the membrane. At the point of charge saturation, vesicle aggregation takes place and we show that this behavior does not always lead to charge reversal at the membrane. Models for the binding behavior and structural organization of chitosan are proposed based on the experimental results from ITC, ζ-potential, and dynamic light scattering.     

Influence of microenvironment and liposomal formulation on secondary structure and bilayer interaction of lysozyme

The conformation of peptide and protein drugs in various microenvironments and the interaction with drug carriers such as liposomes are of considerable interest. In this study the influence of microenvironments such as pH, salt concentration, and surface charge on the secondary structure of a model protein, lysozyme, either in solution or entrapped in liposomes with various molar ratios of phosphatidylcholine (PC):cholesterol (Chol) was investigated. It was found that entrapment efficiency was more pronounced in negatively charged liposomes than in non-charged liposomes, which was independent of Chol content and pH of hydration medium. The occurrence of aggregation, decrease in zeta potential, and alteration of ³¹P NMR chemical shift of negatively charged lysozyme liposomes compared to blank liposomes suggested that the electrostatic interaction plays a major role in protein–lipid binding. Addition of sodium chloride could impair the neutralizing ability of positively charged lysozyme on negatively charged membrane via chloride counterion binding. Neither lysozyme in various buffer solutions with sodium chloride nor that entrapped in liposomes showed any significant change in their secondary structures. However, significant decrease in α-helical content of lysozyme in non-charged liposomes at higher pH and salt concentrations was discovered.     

The Effect of Surface Charge on Adsorption of a Cationic Polyelectrolyte

The regularities of adsorption of a cationic polyelectrolyte, poly(diallyldimethylammonium chloride), on the surface of fused quartz are studied at different values of solution pH by capillary electrokinetics. It is shown that the polyelectrolyte adsorption on a negatively charged surface depends on the value of the surface charge and increases with its growth. At a low charge value (pH 3.8), the polyelectrolyte adsorption increases the quartz surface charge. The driving forces of the adsorption are both electrostatic interaction and forces of nonelectrostatic nature, probably hydrophobic interactions and a change in entropy due to the displacement of counterions from a double layer. The adsorption of poly(diallyldimethylammonium chloride) on quartz from alkaline and neutral solutions is irreversible, which indicates the key role of the electrostatic interaction. At low values of the surface charge, the nonelectrostatic interactions play the main role, thereby resulting in polyelectrolyte desorption.     

Adsorption of bovine serum albumin on template-polymerized chitosan/poly(methacrylic acid) complexes

Particulate systems composed of polyelectrolyte complexes (PEC) based on chitosan and poly(methacrylic acid) were obtained via template polymerization. The resultant particles were characterized as having regions with different charge densities: chitosan predominating in the core and poly(methacrylic acid) at the surface, the particles being negatively charged, as a consequence. Albumin was adsorbed on these particles (after cross-linking with glutardialdehyde), and pH was controlled to obtain two conditions: (i) adsorption of positively charged albumin and (ii) adsorption of albumin at its isoelectric point. Adsorption isotherms and zeta-potential measurements showed that albumin adsorption was controlled by hydrogen bonding/van der Waals interactions and that brush-like structures may enhance the adsorption of albumin on these particles. It was also found that shearing can induce desorption of albumin from the PEC surface, depending on the continuous phase albumin concentration.     

SOME RELATIONSHIPS BETWEEN ULTRAVIOLET LIGHT AND HEME-PROTEIN-INDUCED PEROXIDATIVE LIPID BREAKDOWN IN LIPOSOMES, AS REFLECTED BY FLUORESCENCE CHANGES: THE EFFECT OF NEGATIVE SURFACE CHARGE

Abstract— The water soluble, photolabile nitrene precursor,azidonaphthalene–2,7-disulfonic acid (ANDS) was encapsulated in small unilamellar, isoelectric (egg PC) or negatively charged (egg PC + dihexadecylphosphate) liposomes. The individual and combined effects of heme-proteins and UV irradiation on the fluorescence of these vesicles under aerobic conditions were studied. Consistent with the catalytic action of heme-proteins on lipid peroxidation and peroxide decomposition, addition of cytochrome c (positively charged) or catalase (negatively charged) to the vesicles elicited immediate formation of a fluorescence band at 470 nm, characteristic of Schiff bases that form from aldehyde byproducts of decomposing hydroperoxides. Ultraviolet irradiation of liposomes for 5 min caused no significant changes in the fluorescence spectrum, in spite of the radiolysis of ANDS inside the vesicles with consequent formation of nitrene radicals. When isoelectric vesicles were irradiated with UV light in the presence of cytochrome c or catalase, Schiff base formation was further increased by2–3 fold, which effect was not observed in the absence of internal ANDS, or in the presence of negative surface charge on the vesicles. These findings suggest that (a) UV irradiation, by itself, cannot trigger lipid decomposition even when it is assisted by photoproduced nitrene radicals, (b) there is a ternary synergism between UV light, heme-proteins and nitrene radicals in promoting peroxidative lipid breakdown, and (c) negative surface charge inhibits the above synergism, which effect is unlikely to be due to electrostatic interaction between the vesicles and the protein or the ANDS.     

The effect of humic acid adsorption on pH-dependent surface charging and aggregation of magnetite nanoparticles

The pH-dependent adsorption of humic acid (HA) on magnetite and its effect on the surface charging and the aggregation of oxide particles were investigated. HA was extracted from brown coal. Synthetic magnetite was prepared by alkaline hydrolysis of iron(II) and iron(III) salts. The pH-dependent particle charge and aggregation, and coagulation kinetics at pH approximately 4 were measured by laser Doppler electrophoresis and dynamic light scattering. The charge of pure magnetite reverses from positive to negative at pH approximately 8, which may consider as isoelectric point (IEP). Near this pH, large aggregates form, while stable sols exist further from it. In the presence of increasing HA loading, the IEP shifts to lower pH, then at higher loading, magnetite becomes negatively charged even at low pHs, which indicate the neutralization and gradual recharging positive charges on surface. In acidic region, the trace HA amounts are adsorbed on magnetite surface as oppositely charged patches, systems become highly unstable due to heterocoagulation. Above the adsorption saturation, however, the nanoparticles are stabilized in a way of combined steric and electrostatic effects. The HA coated magnetite particles form stable colloidal dispersion, particle aggregation does not occur in a wide range of pH and salt tolerance is enhanced.     

Arrays of lipid bilayers and liposomes on patterned polyelectrolyte templates

This paper presents novel methods to produce arrays of lipid bilayers and liposomes on patterned polyelectrolyte multilayers. We created the arrays by exposing patterns of poly(dimethyldiallylammonium chloride) (PDAC), polyethylene glycol (m-dPEG) acid, and poly(allylamine hydrochloride) (PAH) on polyelectrolyte multilayers (PEMs) to liposomes of various compositions. The resulting interfaces were characterized by total internal reflection fluorescence microscopy (TIRFM), fluorescence recovery after pattern photobleaching (FRAPP), quartz crystal microbalance (QCM), and fluorescence microscopy. Liposomes composed of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and 1,2-dioleoyl-sn-glycero-3-phosphate (monosodium salt) (DOPA) were found to preferentially adsorb on PDAC and PAH surfaces. On the other hand, liposome adsorption on sulfonated poly(styrene) (SPS) surfaces was minimal, due to electrostatic repulsion between the negatively charged liposomes and the SPS-coated surface. Surfaces coated with m-dPEG acid were also found to resist liposome adsorption. We exploited these results to create arrays of lipid bilayers by exposing PDAC, PAH and m-dPEG patterned substrates to DOPA/DOPC vesicles of various compositions. The patterned substrates were created by stamping PDAC (or PAH) on SPS-topped multilayers, and m-dPEG acid on PDAC-topped multilayers, respectively. This technique can be used to produce functional biomimetic interfaces for potential applications in biosensors and biocatalysis, for creating arrays that could be used for high-throughput screening of compounds that interact with cell membranes, and for probing, and possibly controlling, interactions between living cells and synthetic membranes.     

Adsorption of the protein bovine serum albumin in a planar poly(acrylic acid) brush layer as measured by optical reflectometry

The adsorption of bovine serum albumin (BSA) in a planar poly(acrylic acid) (PAA) brush layer has been studied by fixed-angle optical reflectometry. The influence of polymer length, grafting density, and salt concentration is studied as a function of pH. The results are compared with predictions of an analytical polyelectrolyte brush model, which incorporates charge regulation and excluded volume interactions. A maximum in adsorption is found near the point of zero charge (pzc) of the protein. At the maximum, BSA accumulates in a PAA brush to at least 30 vol %. Substantial adsorption continues above the pzc, that is, in the pH range where a net negatively charged protein adsorbs into a negatively charged brush layer, up to a critical pH value. This critical pH value decreases with increasing ionic strength. The adsorbed amount increases strongly with both increasing PAA chain length and increasing grafting density. Experimental data compare well with the analytical model without having to include a nonhomogeneous charge distribution on the protein surface. Instead, charge regulation, which implies that the protein adjusts its charge due to the negative electrostatic potential in the brush, plays an important role in the interpretation of the adsorbed amounts. Together with nonelectrostatic interactions, it explains the significant protein adsorption above the pzc.     

Adsorption of poly(vinyl formamide-co-vinyl amine) onto silica particle surfaces and stability of the formed hybrid materials

In order to produce silica/polyelectrolyte hybrid materials the adsorption of the polyelectrolyte poly(vinyl formamide-co-vinyl amine), P(VFA-co-VAm) was investigated. The adsorption of the P(VFA-co-VAm) from an aqueous solution onto silica surface is strongly influenced by the pH value and ionic strength of the aqueous solution, as well as the concentration of polyelectrolyte. The adsorption of the positively charged P(VFA-co-VAm) molecules on the negatively charged silica particles offers a way to control the surface charge properties of the formed hybrid material. Changes in surface charges during the polyelectrolyte adsorption were studied by potentiometric titration and electrokinetic measurements. X-ray photoelectron spectroscopy (XPS) was employed to obtain information about the amount of the adsorbed polyelectrolyte and its chemical structure. The stability of the adsorbed P(VFA-co-VAm) was investigated by extraction experiments and streaming potential measurements. It was shown, that polyelectrolyte layer is instable in an acidic environment. At a low pH value a high number of amino groups are protonated that increases the solubility of the polyelectrolyte chains. The solvatation process is able to overcompensate the attractive electrostatic forces fixing the polyelectrolyte molecules on the substrate material surface. Hence, the polyelectrolyte layer partially undergoes dissolving process.     

Interfacial and rheological properties of humic acid/hematite suspensions

This work deals with the effect of humic acid (HA) adsorption on the interfacial properties, the stability, and the rheology of aqueous iron oxide (hematite) suspensions. It is first of all demonstrated that HA effectively adsorbs onto hematite, mainly at acid pH. Since the charge of the HA chains is negative, it will be electrostatically attracted to the hematite surface below the point of zero charge of the particles, when they are positively charged. Electrophoresis measurements of hematite suspensions as a function of pH in the presence and absence of HA clearly demonstrate the adsorption of negatively charged entities on the oxide. Since the HA-covered particles can be thought of as "soft" colloids, Ohshima's theory was used to gain information on the surface potential and the charge density of the HA layer (H. Ohshima, in: A.V. Delgado (Ed.), Interfacial Electrokinetics and Electrophoresis, Dekker, New York, 2002, p. 123). A different procedure was also used to ascertain the degree of modification experienced by the hematite surface when placed in contact with HA solutions. The contact angles of selected liquids on pretreated hematite layers lead to the conclusion that the humic acid molecules impart to the particles a significant electron-donor character, in turn increasing their hydrophilicity. All this amount of information is used in the work for the interpretation of the rheological properties of hematite suspensions; the results are consistent with a stabilizing effect of HA adsorption on the suspensions, mainly as a consequence of the increased electrostatic repulsion between particles.     

The adsorption of polyampholytes on negatively and positively charged polystyrene latex

The adsorption of two polyampholytes (a random copolymer of -glutamic acid and -lysine, and a well-defined tetramer of -lysyl- -glutamyl-glycine) onto positively and negatively charged latex was studied as a function of the pH and the ionic strength. The adsorbed amount proved to be almost independent of the salt concentration. The pH dependence was found to follow the same trends on negatively charged and positively charged latex. At low pH, where the polyampholytes are positively charged, a high adsorbed amount was found irrespective of the sign of the surface charge. At high pH, where the macromolecules are negatively charged, no adsorption was measured, not even with the positive latex. This is probably due to the very good solubility of the polyampholytes at this pH. Electrophoretic mobility measurements revealed that already at very low concentrations of polyampholyte charge reversal of the particles occurred.     

Effect of the electrostatic charge on the mechanism inducing liposome solubilization: a kinetic study by synchrotron radiation SAXS

The anionic surfactant sodium dodecyl sulfate (SDS) was used to induce the initial steps of the solubilization of liposomes. The structural transformations as well as the kinetics associated with this initial period were studied by means of time-resolved small-angle X-ray scattering (SAXS) using a synchrotron radiation source. Neutral and electrically charged (anionic and cationic) liposomes were used to investigate the effect of the electrostatic charges on the kinetics of these initial steps. The mechanism that induces the solubilization process consisted of adsorption of surfactant on the bilayers and desorption of mixed micelles from the liposomes surface to the aqueous medium. In all cases the time needed for desorption of the first mixed micelles was shorter than that for complete adsorption of the surfactant on the liposomes surface. The present work demonstrates that adsorption of the SDS molecules on negatively charged liposomes was slower and release of mixed micelles from the surface of these liposomes was faster than for neutral liposomes. In contrast, in the case of positively charged liposomes, the adsorption and release processes were, respectively, faster and slower than those for neutral vesicles.     

Poisson-Boltzmann theory of the charge-induced adsorption of semi-flexible polyelectrolytes

A model is suggested for the structure of an adsorbed layer of a highly charged semi-flexible polyelectrolyte on a weakly charged surface of opposite charge sign. The adsorbed phase is thin, owing to the effective reversal of the charge sign of the surface upon adsorption, and ordered, owing to the high surface density of polyelectrolyte strands caused by the generally strong binding between polyelectrolyte and surface. The Poisson-Boltzmann equation for the electrostatic interaction between the array of adsorbed polyelectrolytes and the charged surface is solved for a cylindrical geometry, both numerically, using a finite element method, and analytically within the weak curvature limit under the assumption of excess monovalent salt. For small separations, repulsive surface polarization and counterion osmotic pressure effects dominate over the electrostatic attraction and the resulting electrostatic interaction curve shows a minimum at nonzero separations on the Angstrom scale. The equilibrium density of the adsorbed phase is obtained by minimizing the total free energy under the condition of equality of chemical potential and osmotic pressure of the polyelectrolyte in solution and in the adsorbed phase. For a wide range of ionic conditions and charge densities of the charged surface, the interstrand separation as predicted by the Poisson-Boltzmann model and the analytical theory closely agree. For low to moderate charge densities of the adsorbing surface, the interstrand spacing decreases as a function of the charge density of the charged surface. Above about 0.1 M excess monovalent salt, it is only weakly dependent on the ionic strength. At high charge densities of the adsorbing surface, the interstrand spacing increases with increasing ionic strength, in line with the experiments by Fang and Yang [J. Phys. Chem. B 101, 441 (1997)].     

Reversible switching of protein uptake and release at polyelectrolyte multilayers detected by ATR-FTIR spectroscopy

The reversible switching of uptake and release of the proteins lysozyme (LYZ, IEP = 11.1) and human serum albumin (HSA, IEP = 4.8) at the surface attached polyelectrolyte multilayer (PEM) consisting of poly(ethylene-imine) (PEI) and poly(acrylic acid) (PAC) is shown. Protein adsorption could be switched by pH setting due to electrostatic interaction. Adsorption of positively charged LYZ at PEM-6 took place at pH = 7.3, where the outermost PAC layer was negatively charged. Complete desorption was obtained at pH = 4, where the outermost PAC layer was neutral. Additionally the charge state of the last adsorbed PAC layer in dependence of the pH of the medium could be determined in the ATR-FTIR difference spectra by the ν(COO⁻) and ν(C=O) band due to carboxylate and carboxylic acid groups. Adsorption of negatively charged HSA at PEM-7 was achieved at pH = 7.3, where the outermost PEI layer was positively charged. Part desorption was obtained at pH = 10, where the outermost PEI layer was neutral. PEM of PEI/PAC may be used for the development of bioactive and bionert materials and protein sensors.     

Effect of adsorption of bovine serum albumin on liposomal membrane characteristics

The effect of adsorption of bovine serum albumin (BSA) on the membrane characteristics of liposomes at pH 7.4 was examined in terms of zeta potential, micropolarity, microfluidity and permeability of liposomal bilayer membranes, where negatively charged L-alpha-dipalmitoylphosphatidylglycerol (DPPG)/L-alpha-dipalmitoylphosphatidylcholine (DPPC), negatively charged dicetylphosphate (DCP)/DPPC and positively charged stearylamine (SA)/DPPC mixed liposomes were used. BSA with negative charges adsorbed on negatively charged DPPG/DPPC mixed liposomes but did not adsorb on negatively charged DCP/DPPC and positively charged SA/DPPC mixed liposomes. Furthermore, the adsorption amount of BSA on the mixed DPPG/DPPC liposomes increased with increasing the mole fraction of DPPG in spite of a possible electrostatic repulsion between BSA and DPPG. Thus, the adsorption of BSA on liposomes was likely to be related to the hydrophobic interaction between BSA and liposomes. The microfluidity of liposomal bilayer membranes near the bilayer center decreased by the adsorption of BSA, while the permeability of liposomal bilayer membranes increased by the adsorption of BSA on liposomes. These results are considered to be due to that the adsorption of BSA brings about a phase separation in liposomes and that a temporary gap is consequently formed in the liposomal bilayer membranes, thereby the permeability of liposomal bilayer membranes increases by the adsorption of BSA.     

Colloid Stabilization by an Oppositely Charged Polysaccharide: Mechanism of Interaction and Interface Studied with Synchrotron X-Rays

The liposome surface is modeled by a 2-D lipid monolayer made of behenic acid forming a negatively charged interface. The properties at the air/liquid interface were examined by pressure-area isotherms in a Langmuir trough introducing diluted chitosan solution in the subphase. X-ray reflectivity of the interface was measured in the same conditions in order to determine the layer thickness of the chitosan adsorbed on the behenic acid monolayer formed on water. Influence of pH of the subphase and molecular weight of adsorbed chitosan was investigated. All these results allow confirming that the charge and the stability of the lipid layer are controlled by the nature of the polyelectrolyte and the nature of the medium. In particular, the use of biocompatible charged polysaccharides is of interest for biomedical applications.     

表面等离子体子共振技术实时研究蛋白质在修饰表面的静电吸附行为

研究蛋白质在固相表面的静电吸附特性,进而控制蛋白质在修饰表面的静电吸附尤为重要,表面等离子体子共振可以检测金属表面吸附物质厚度和折射率的变化^[1]。这种技术已在研究生物分子相互作用^[2]和考察自组装单层的形成^[3]及蛋白质在固体表面吸附行为^[9-11]等方面得到广泛的应用。对蛋白质在固体表面吸附行为的研究多为考察不同的蛋白质在不同的修饰表面的吸附行为。然而,对蛋白质在修饰表面静电吸附的本质影响因素的研究却少有报道^[4]。本文使用表面等离子体子共振技术实时研究了蛋白质在甲羧基化葡聚糖修饰表面的静电吸附与溶液pH值及离子强度的依赖关系。     

Theory of polyelectrolyte adsorption onto surfaces patterned with charge and topography

Mean-field theory is used to derive criteria for the adsorption of a weakly charged polyelectrolyte molecule from salt solution onto surfaces patterned with charge and topography. For flat surfaces patterned with periodic arrays of charged patches, the adsorbed layer thickness predicted using mean-field theory and that found by Brownian dynamics simulations are in quantitative agreement in the strong-adsorption regime, which corresponds to sufficiently small kappa or sufficiently large |sigma(eff)q|, where kappa is the inverse Debye screening length, sigma(eff) is an effective surface charge density, and q is the charge on each segment of the polyelectrolyte. Qualitative agreement is obtained in the weak-adsorption regime, and for the case where surfaces are patterned with both charge and topography. For uniformly charged, sinusoidally corrugated surfaces, the theory predicts that the critical temperature required for adsorption can be greater than or less than the corresponding value for a flat surface depending on the relative values of kappa and the corrugation wave number. If the surface charge is also allowed to vary sinusoidally, then adsorption is predicted to occur only when the topography crests have a surface charge opposite to that of the polyelectrolyte. Surfaces patterned with rectangular indentations having charged bottoms which are separated by flat charged plateaus are investigated as well. Adsorption is predicted to occur even when the net surface charge is zero, provided that the plateaus have a charge opposite to that of the polyelectrolyte. If the charge on the plateaus and polyelectrolyte is the same, adsorption may still occur if electrostatic attraction from the indentation bottoms is sufficiently strong.     

Adsorption of branched-linear polyethyleneimine-ethylene oxide conjugate on hydrophilic silica investigated by ellipsometry and Monte Carlo simulations

The adsorption of and conformation adopted by a branched-linear polymer conjugate to the hydrophilic silica-aqueous solution interface have been studied by in situ null ellipsometry and Monte Carlo simulations. The conjugate is a highly branched polyethyleneimine structure with ethyleneoxide chains grafted to its primary and secondary amino groups. In situ null ellipsometry demonstrated that the polymer conjugate adsorbs to the silica surface from water and aqueous solution of 1 mM asymmetric divalent salt (calcium and magnesium chloride to emulate hard water) over a large pH range. The adsorbed amount is hardly affected by pH and large charge reversal on the negatively charged silica surface occurred at pH = 4.0, due to the adsorption of the cationic polyelectrolyte. The Monte Carlo simulations using an appropriate coarse-grained model of the polymer in solution predicted a core-shell structure with no sharp boundary between the ethyleneimine and ethyleneoxide moieties. The structure at the interface is similar to that in solution when the polymer degree of protonation is low or moderate while at high degree of protonation the strong electrostatic attraction between the ethyleneimine core and oppositely charged silica surface distorts the ethyleneoxide shell so that an "anemone"-like configuration is adopted. The adsorption of alkyl benzene sulfonic acid (LAS) to a preadsorbed polymer layer was also investigated by null ellipsometry. The adsorption data brought additional support for the existence of a strong polymer adsorption and showed the presence of a binding which was further enhanced by the decreased solvency of the surfactant in the salt solution and confirmed the surface charge reversal by the polymer adsorption at pH = 4.0.     

A theoretical investigation on the pH-induced switching of mixed polyelectrolyte brushes

A theoretical investigation on the pH-induced switching of mixed polyelectrolyte brushes was performed by using a molecular theory. The results indicate that the switching properties of mixed polyelectrolyte brushes are dependent on the pH values. At low pH, negatively charged chains adopt a compact conformation on the bottom of the brush while positively charged chains are highly stretched away from the surface. At high pH values, the inverse transformation takes place. The role of pH determining the polymer chains conformation and charge behavior of mixed polyelectrolyte brushes was analyzed. It is found that there exists a mechanism for reducing strong electrostatic repulsions： stretching of the chains. The H＋ and OH- units play a more important role as counterions of the charged polymers do. The collapse of the polyelectrolyte chains for different pH values could be attributed to the screening of the electrostatic interactions and the counterion-mediated attractive interaction along the chains.