Molecular organization in binary mixtures of derivatives of naphthalenebicarboxylic acid and naphthoylenebenzimidazole with a liquid crystal in two-dimensional layers

Langmuir films of some dichroic dyes, namely derivatives of naphthalenebicarboxylic acid and derivatives of naphthoylenebenzimidazole, as well as of their mixtures with the liquid crystals 4-octyl-4'-cyanobiphenyl (8CB) and 4-pentyl-4'-cyano-p-terphenyl (5CT) were prepared. Surface pressure/mean molecular area isotherms were recorded from which some information about the alignment of molecules in a monomolecular layer at an air-water interface could be deduced. It was found that the properties of the monolayer are highly sensitive to the molecular structure of the side groups substituted on the main skeleton of the dye molecule, and to the mixture composition. Moreover, information about the miscibility or the phase separation of the two components in Langmuir films formed from dye/liquid crystal mixtures was obtained by using the excess area criterion and surface pressure rules.     

Spectroscopic studies of Langmuir-Blodgett films of 3,4,9,10-tetra(heptyloxycarbonyl)perylene and its mixtures with a liquid crystal

Langmuir (L) and Langmuir-Blodgett (LB) films of 3,4,9,10-tetra(heptyloxycarbonyl)perylene and its binary mixtures with 4-octyl-4'-cyanobiphenyl (8CB) and 4-pentyl-4'-cyano-p-terphenyl (5CT) have been studied. On the basis of the surface pressure-mean molecular area isotherms of L films, the alignment of the molecules on the air-water interface has been estimated. The L films were transferred onto quartz plates at surface pressures below the collapse point. The absorption and fluorescence spectra of LB films, obtained using unpolarized and linearly polarized light, were recorded. The results obtained have led to conclusions on the arrangement of the dye and liquid crystal molecules on the air-solid substrate interface. The fluorescence spectra revealed the formation of excited dimers in LB films.     

Molecular organization in binary mixtures of derivatives of naphthalenebicarboxylic acid and naphthoylenebenzimidazole with a liquid crystal in two-dimensional layers II. Langmuir-Blodgett films

Langmuir-Blodgett (LB) films of some dichroic dyes, namely derivatives of naphthalenebicarboxylic acid and derivatives of naphthoylenebenzimidazole, and of their mixtures with mesogens: 4-octyl-4'-cyanobiphenyl or 4-pentyl-4'-cyano-p-terphenyl were prepared. Absorption and fluorescence studies using unpolarized and linearly polarized light were carried out. Both absorption and fluorescence spectra indicated the formation of aggregates of dye molecules in monomolecular layers. Moreover, it was found that dye molecules are more tilted to the quartz surface in LB films than to the plane of the air-water interface in Langmuir films.     

Supramolecular architecture in Langmuir and Langmuir-Blodgett films incorporating a chiral azobenzene

This article describes the synthesis and fabrication of Langmuir and Langmuir-Blodgett (LB) films incorporating a chiral azobenzene derivative, namely, ( S)-4- sec-butyloxy-4'-[5'-(methyloxycarbonyl)pentyl-1'-oxy]azobenzene, abbreviated as AZO-C4(S). Appropriate conditions for the fabrication of monolayers of AZO-C4(S) at the air-water interface have been established, and the resulting Langmuir films have been characterized by a combination of surface pressure and surface potential versus area per molecule isotherms, Brewster angle microscopy, and UV-vis reflection spectroscopy. The results indicate the formation of an ordered trilayer at the air-water interface with UV-vis reflection spectroscopy showing a new supramolecular architecture for multilayered films as well as the formation of J aggregates. Films were transferred onto solid substrates, with AFM revealing well-ordered multilayered films without 3D defects. Infrared and UV-vis absorption spectroscopy indicate that the supramolecular architecture may be favored by the formation of H bonds between acid groups in neighboring layers and pi-pi intermolecular interactions. Circular dichroism spectra reveal chiro-optical activity in multilayered LB films.     

Molecular organization in binary mixtures of derivatives of naphthalenebicarboxylic acid and naphthoylenebenzimidazole with a liquid crystal in two-dimensional layers

Langmuir films of some dichroic dyes, namely derivatives of naphthalenebicarboxylic acid and derivatives of naphthoylenebenzimidazole, as well as of their mixtures with the liquid crystals 4-octyl-4′-cyanobiphenyl (8CB) and 4-pentyl-4″-cyano-p-terphenyl (5CT) were prepared. Surface pressure/mean molecular area isotherms were recorded from which some information about the alignment of molecules in a monomolecular layer at an air–water interface could be deduced. It was found that the properties of the monolayer are highly sensitive to the molecular structure of the side groups substituted on the main skeleton of the dye molecule, and to the mixture composition. Moreover, information about the miscibility or the phase separation of the two components in Langmuir films formed from dye/liquid crystal mixtures was obtained by using the excess area criterion and surface pressure rules.     

Alignment of liquid crystal and dichroic dye molecules in mixed Langmuir and Langmuir-Blodgett films

A study of dichroic dye-liquid crystal mixtures (guest-host systems) in monolayers formed at a gas-liquid interface (Langmuir films) and at a solid surface (Langmuir-Blodgett films) has been made. As a host 4- n -octyl-4'-cyanobiphenyl (8CB) or 4- n -pentyl-4"-cyano- p -terphenyl (5CT) were chosen, while three dichroic azo dyes with various molecular structures were used as guest species. The dyes were added to the liquid crystal matrices at a concentration corresponding to the whole range of molar fractions and the surface pressure-mean molecular area isotherms for Langmuir films were recorded. On the basis of the isotherms, conclusions about the molecular organization and the miscibility of the components in the ultrathin films were drawn. The Langmuir films were transferred onto the quartz plates at surface pressures below the collapse point. The polarized absorption spectra of the Langmuir-Blodgett films were recorded and information about the alignment and intermolecular interactions in the mixtures of the non-amphiphilic dichroic dyes and the liquid crystals with strongly polar terminal groups were obtained.     

Alignment of liquid crystal and dichroic dye molecules in mixed Langmuir and Langmuir-Blodgett films

A study of dichroic dye-liquid crystal mixtures (guest-host systems) in monolayers formed at a gas-liquid interface (Langmuir films) and at a solid surface (Langmuir-Blodgett films) has been made. As a host 4- n -octyl-4′-cyanobiphenyl (8CB) or 4- n -pentyl-4″-cyano- p -terphenyl (5CT) were chosen, while three dichroic azo dyes with various molecular structures were used as guest species. The dyes were added to the liquid crystal matrices at a concentration corresponding to the whole range of molar fractions and the surface pressure-mean molecular area isotherms for Langmuir films were recorded. On the basis of the isotherms, conclusions about the molecular organization and the miscibility of the components in the ultrathin films were drawn. The Langmuir films were transferred onto the quartz plates at surface pressures below the collapse point. The polarized absorption spectra of the Langmuir-Blodgett films were recorded and information about the alignment and intermolecular interactions in the mixtures of the non-amphiphilic dichroic dyes and the liquid crystals with strongly polar terminal groups were obtained.     

Air-water interfacial behavior of linear-dendritic block copolymers containing PEG and azobenzene chromophores

Fabrication of Langmuir films at the air-water interface of four linear-dendritic block copolymers (LDBCs) is described. The LDBCs are composed of a linear hydrophilic chain of poly(ethylene glycol) (PEG) and the first four generations of hydrophobic aliphatic polyester dendrons functionalized at the periphery with cyanoazobenzene chromophores. Langmuir films of the LDBCs, coded as PEG-AZOn (n indicates the number of cyanoazobenzene units at the periphery of the dendritic block), have been characterized by a combination of surface pressure versus area per molecule isotherms, UV-vis reflection spectroscopy and Brewster angle microscopy. The observed PEG-AZOn Langmuir film behavior depends strongly on the hydrophilic/hydrophobic ratio. A typical transition, related to PEG chains desorption from the air-water interface into the water subphase is observed for all the LDBCs, except for PEG-AZO16. In addition, PEG-AZO2 and PEG-AZO4 show a second transition whose nature has been studied in detail. Azobenzene chromophore interactions have been shown to be relevant in the organization of PEG-AZOn (n=4, 8 and 16) Langmuir films. Moreover, for PEG-AZO16 the orientation of the azobenzene units has been determined, revealing the formation of a well organized structure of azobenzene moieties at the air-water interface.     

Pure and mixed films of a nitrostilbene derivative at the air-water interface, Langmuir-Blodgett multilayer fabrication, and optical characterization

This paper reports the preparation and characterization of pure Langmuir and Langmuir-Blodgett (LB) films of a stilbene derivative containing two alkyl chains, namely 4-dioctadecylamino-4'-nitrostilbene. Mixed films incorporating docosanoic acid and the stilbene derivative are also studied. Brewster angle microscopy (BAM) analysis has revealed the existence of randomly oriented three-dimensional (3D) aggregates, spontaneously formed immediately after the spreading process of the stilbene derivative onto the water surface. These 3D aggregates coexist with a Langmuir film that shows the typical gas, liquid, and solid-like phases in the surface pressure and surface potential vs area per molecule isotherms, indicative of an average preferential orientation of the stilbene compound at the air-water interface, and a gradual molecular arrangement into a defined structure upon compression. A blue shift of 55 nm of the reflection spectrum of the Langmuir film with respect to the spectrum of a chloroform solution of the nitrostilbene indicates that two-dimensional (2D) H-aggregates are formed at the air-water interface. The monolayers are transferred undisturbed onto solid substrates with atomic force microscopy (AFM) revealing that the one layer LB films are constituted by a monolayer of the stilbene derivative together with some 3D aggregates. When the nitrostilbene compound is blended with docosanoic acid, the 3D aggregation is avoided in the Langmuir and Langmuir-Blodgett films, but does not limit the formation of 2D H-aggregates, desirable for second-order nonlinear optical response in the blue domain. The AFM images of the mixed LB films show that they are formed by a docosanoic acid monolayer and, on the top of it, a bilayer of the stilbene derivative.     

Preparation of ordered films containing a phenylene ethynylene oligomer by the Langmuir-Blodgett technique

This paper reports the fabrication and characterization of Langmuir and Langmuir-Blodgett (LB) films incorporating an oligo(phenylene-ethynylene) (OPE) derivative, namely, 4-[4-(4-hexyloxyphenylethynyl)-phenylethynyl]-benzoic acid (HBPEB). Conditions appropriate for deposition of monolayers of HBPEB at the air-water interface have been established and the resulting Langmuir films characterized by a combination of surface pressure and surface potential versus area per molecule isotherms, Brewster angle microscopy, and ultraviolet reflection spectroscopy. The Langmuir films are readily transferred onto solid substrates, and one-layer LB films transferred at several surface pressures onto mica substrates have been analyzed by means of atomic force microscopy, from which it can be concluded that 14 mN/m is an optimum surface pressure of transference, giving well-ordered homogeneous films without three-dimensional defects and a low surface roughness. The optical and emissive properties of the LB films have been determined with significant blue-shifted absorption spectra indicating formation of two-dimensional H aggregates and a Stokes shift illustrating the effects of the solid-like environment on the molecular chromophore.     

Structural properties and Raman spectroscopy of lipid Langmuir monolayers at the air-water interface

Spectra of octadecylamine (ODA) Langmuir monolayers and egg phosphatidylcholine (PC)/ODA-mixed monolayers at the air-water interface have been acquired. The organization of the monolayers has been characterized by surface pressure-area isotherms. Application of polarized optical microscopy provides further insight in the domain structures and interactions of the film components. Surface-enhanced Raman scattering (SERS) data indicate that enhancement in Raman spectra can be obtained by strong interaction between headgroups of the surfactants and silver particles in subphase. By mixing ODA with phospholipid molecules and spreading the mixture at the air-water interface, we acquired vibrational information of phospholipid molecules with surfactant-aided SERS effect.     

Adsorption kinetics of a fluorescent dye in a long chain fatty acid matrix

This work reports the adsorption kinetics of a highly fluorescent laser dye rhodamine B (RhB) in a preformed stearic acid (SA) Langmuir monolayer. The reaction kinetics was studied by surface pressure-time (π-t) curve at constant area and in situ fluorescence imaging microscopy (FIM). Increase in surface pressure (at constant area) with time as well as increase in surface coverage of monolayer film at air-water interface provide direct evidence for the interaction. ATR-FTIR spectra also supported the interaction and consequent complexation in the complex films. UV-vis absorption and Fluorescence spectra of the complex Langmuir-Blodgett (LB) films confirm the presence of RhB molecules in the complex films transferred onto solid substrates. The outcome of this work clearly shows successful incorporation of RhB molecules into SA matrix without changing the photophysical characteristics of the dye, thus making the dye material as LB compatible.     

Photo-induced structural changes of azobenzene Langmuir-Blodgett films

Structural changes of the Langmuir-Blodgett (LB) films of azobenzene accompanied by photoisomerization are described. First, photoisomerization is explained in terms of 'free volume'. In the polyion complex monolayers of amphiphiles having two azobenzene units at the air-water interface, the area per molecule depends on the polycation species. The fraction of cis-azobenzene in the LB films at the photostationary state under the illumination with UV light increased with increasing area per molecule, which is consistent with the concept of free volume. Second, a counter example of the concept of free volume is presented. Three-dimensional cone-shaped structures developed with trans-to-cis photoisomerization in the polyion complex LB film of a water-soluble amphiphilic azobenzene. These structures appeared and disappeared reversibly by alternate illumination with UV and visible light. The results indicate that the two-dimensional LB film structure exerts significant modification by photoisomerization. This is against the concept of free volume because this concept does not consider the possibility that the two-dimensional LB film structures may change into three-dimensional ones. Finally, photo-induced J-aggregate formation of non-photochromic and photochromic dyes is described. Two cyanine dyes were each mixed with an amphiphilic azobenzene in the LB films. These cyanine dyes are known to form J-aggregates in single-component LB films. In the mixed LB films, the J-aggregate formation was suppressed to some extent. The alternate illumination of the films with UV and visible light caused the photoisomerization of azobenzene in the mixed LB films, which triggered the J-aggregate formation of the cyanine dyes. The J-aggregate formation was accompanied by the development of three-dimensional cone-shaped structures from the film surface. When an amphiphilic merocyanine was mixed with the azobenzene in the LB films, J-aggregate formation was also induced by the alternate illumination with UV and visible light. This J-aggregate formation was also accompanied by a large morphological change: circular domains changed into fractal-like ones. The J-aggregate formation of the dyes and the concomitant morphological change were irreversible. In these cases, the photoisomerization of azobenzene served as a trigger to induce self-organization of the dye molecules.     

On the stability of Langmuir films of pyramidic mesogens

Pyramidic mesogens forming thermotropic liquid crystal bulk phases were spread in an air-water interface. Pressure surface measurements and polarizing microscopy on the Langmuir films were used to characterize the various states of these pyramidic-like molecules. For two compounds bearing short lateral aliphatic chains, the surface pressure isotherms exhibit a large plateau region corresponding to a metastable monolayer in which the molecules may adopt an 'edge-on' arrangement. The coexistence of multilayered, anisotropic, slowly growing domains with the monolayer in the plateau region has been observed at long time scale. The film area relaxation kinetics at constant surface pressure show the existence of two nucleation mechanisms for the formation of these domains.     

Synthesis and supramolecular self-assembly study of a novel porphyrin molecule in Langmuir and Langmuir-Blodgett films

The self-assembly and supramolecular engineering of porphyrins into ordered arrays have recently attracted much interest because of their promising application potential in molecular and electronic devices, spintronics, energy harvesting and storage, catalysis, and sensor development. We herein report the synthesis and supramolecular self-assembly study of a novel porphyrin molecule, 2Por-TAZ, in Langmuir and Langmuir-Blodgett films. The 2Por-TAZ molecule contains two porphyrin macrocycles attached to a triaminotriazine headgroup. Triaminotriazines are known to form a highly ordered linear supramolecular self-assembly through complementary hydrogen bonding with barbituric acid molecules at the air-water interface. Surface pressure-area isotherm measurements and polarized UV-vis absorption spectroscopic studies indicate that the 2Por-TAZ molecules adopted an edge-on orientation at the air-water interface. Polarized UV-vis absorption study also revealed that the 2Por-TAZ molecules formed linear supramolecular networks on pure water and barbituric acid subphase with porphyrin flat planes facing toward the compression direction. The binding of barbituric acid with 2Por-TAZ molecules was observed from the expansion of the Langmuir monolayer film. Compared to the transferred LB film from pure water subphase, both the UV-vis absorbance and fluorescence emission intensity of the LB film transferred from barbituric acid subphase increased significantly.     

聚苯乙烯-聚(4-乙烯基吡啶)嵌段共聚物LB膜结构形态的研究

采用氯仿作为铺展溶剂,将嵌段共聚物聚苯乙烯-聚(4-乙烯基吡啶)(PS-b-P4VP)稀溶液铺展于空气与水界面上,利用Langmuir-Blodgett(LB)膜技术转移至固体基底.研究了不同的嵌段比、表面压和小分子1-芘丁酸(PBA)的加入对嵌段共聚物气液界面聚集组装的影响.研究发现随着亲水段(P4VP)的增加,聚集组装结构由纳米片状、带状转变成纳米条状、纳米点状结构.表面压对纯PS-b-P4VP聚集组装产生影响,表面压增大,组装体排列紧密;随着表面压的继续增大,单层聚集结构遭到破坏,发生堆叠.加入PBA小分子后,PBA与PS-b-P4VP形成氢键,形态发生明显变化,原来的片状结构转变为条状或点状结构.     

Molecular organization in two-dimensional films of liquid crystalline mixtures III. Langmuir films of binary mixtures of liquid crystal materials with terminal CN o r NCS group

Langmuir films of binary mixtures of the following liquid crystal materials: 4-octyl-4'-cyano'biphenyl (8CB) or 4-pentyl-4"-cyano-p-terphenyl (5CT) with 4-(trans-4'-octylcyclohexyl)isothiocyanatobenzene (8CHBT), trans-4-octyl(4'-cyanophenyl)cyclohexane (8PCH) or 4-octyl4'-isothiocyanatobiphenyl (8BT) were investigated. Surface pressure-mean molecular area isotherms were recorded at various mixture compositions. It was found that only liquid crystal materials for which the molecules have a terminal -CN group are able to form a stable monolayer at the air-water interface. Moreover, information about the miscibility or the phase separation of the two components in the mixures was obtained by using the excess area criterion and surface phase rules.     

On the stability of Langmuir films of pyramidic mesogens

Abstract

Pyramidic mesogens forming thermotropic liquid crystal bulk phases were spread in an air-water interface. Pressure surface measurements and polarizing microscopy on the Langmuir films were used to characterize the various states of these pyramidic-like molecules. For two compounds bearing short lateral aliphatic chains, the surface pressure isotherms exhibit a large plateau region corresponding to a metastable monolayer in which the molecules may adopt an ‘edge-on’ arrangement. The coexistence of multilayered, anisotropic, slowly growing domains with the monolayer in the plateau region has been observed at long time scale. The film area relaxation kinetics at constant surface pressure show the existence of two nucleation mechanisms for the formation of these domains.     

Unexpected bilayer formation in Langmuir films of nucleolipids

Langmuir monolayers have been extensively investigated by various experimental techniques. These studies allowed an in-depth understanding of the molecular conformation in the layer, phase transitions, and the structure of the multilayer. As the monolayer is compressed and the surface pressure is increased beyond a critical value, usually occurring in the minimal closely packed molecular area, the monolayer fractures and/or folds, forming multilayers in a process referred to as collapse. Various mechanisms for monolayer collapse and the resulting reorganization of the film have been proposed, and only a few studies have demonstrated the formation of a bilayer after collapse and with the use of a Ca(2+) solution. In this work, Langmuir isotherms coupled with imaging ellipsometry and polarization modulation infrared reflection absorption spectroscopy were recorded to investigate the air-water interface properties of Langmuir films of anionic nucleolipids. We report for these new molecules the formation of a quasi-hexagonal packing of bilayer domains at a low compression rate, a singular behavior for lipids at the air-water interface that has not yet been documented.     

Interaction between organophosphorous hydrolase and paraoxon studied by surface chemistry in situ at air-water interface

Subphase conditions have been optimized to obtain stable organophosphorous hydrolase (OPH-EC 3.1.8.1) as Langmuir films. The Langmuir film was characterized by surface pressure and surface potential-area isotherms and UV-Vis spectroscopy in situ. The interaction of an organophosphorous compound, namely Paraoxon, with the OPH film was investigated for various surface pressures. The stability of the monolayer and the evidence of the enzyme activity at air-water interface support the use of enzyme LB films as biosensor.