Flow-through solid-phase energy transfer-room temperature phosphorescence for orthophosphate determinations at trace levels

The development of a flow-through solid-phase room temperature phosphorescence (RTP) method for the sensitive determination of orthophosphate in aqueous samples, based on the energy transfer from a phosphor molecule (acting as a donor) to an orthophosphate dye-indicator (acting as an acceptor) is described.The proposed method, to our knowledge the first RTP optosensor for orthophosphate developed so far, is based on the injection in a flow system of 1 ml sample treated to form phosphomolybdenum blue from the orthophosphate. After injection, the phosphomolybdenum blue is on-line co-immobilised onto a polymeric resin containing adsorbed erythrosine B. This selected donor molecule exhibits strong RTP in a de-oxygenated aqueous media when retained on the surface of polymeric resin beads. Absorption spectra of the phosphomolybdenum blue possess a desirable spectral overlap with the emission spectra of the RTP donor and a non-radiative energy transfer occurs from the phosphor molecule to the acceptor dye. An increase in the concentration of orthophosphate of the solution causes an absorption increase of the acceptor (phosphomolybdenum blue) and, therefore, an increase in the energy transfer, which brings about a decrease of the RTP emission. After measurement, the active sensing phase can be regenerated by passing 2 ml of 2 M sodium hydroxide plus 2 ml of methanol. After the injection of 1 ml of 2×10⁻⁶ M erythrosine B the system is prepared again for a new sample injection.Potential interferences by ions present in natural waters, which could affect the optosensor response, and analytical performance characteristics of the RTP method are discussed in detail. An orthophosphate detection limit of 0.5 ng ml⁻¹ (for 1 ml sample injection volume) was achieved. Finally, the selected RTP flow-through optical sensor has been successfully tested for the determination of orthophosphate in different water samples at a very few ng ml⁻¹ levels.     

An application of silaned glass beads to the preconcentration and spectrophotometric determination of traces of phosphorus with molybdate

Silaned glass beads are applied to the preconcentration and spectrophotometric determination of phosphorus as the phosphomolybdenum blue complex. Traces of phosphorus in water are collected as a phosphomolybdenum blue complex on a column of the beads. The phosphomolybdenum blue is eluted with N,N-dimethylformamide and the absorbance of the eluate continuously monitored at 700 nm. The height of the very sharp peak obtained is proportional to the amount of phosphorus present and 0.1-0.5 mug of phosphorus in a 10-ml sample can be determined reproducibly. Interference from arsenate is eliminated by addition of a reducing agent. High concentrations of silica cause a small positive error. This method is applicable to the analysis of river water and sea-water samples.     

Spectrophotometric determination of nitrite and nitrate using phosphomolybdenum blue complex

A method for spectrophotometric determination of nitrite and nitrate is described. This method is based on the reduction of phosphomolybdic acid to phosphomolybdenum blue complex by sodium sulfide. The obtained phosphomolybdenum blue complex is oxidized by the addition of nitrite and this causes a reduction in intensity of the blue color. The absolute decrease in the absorbance of the blue color or the rate of its decrease is found to be directly proportional to the amount of nitrite added. The absorbance of the phosphomolybdenum blue complex is monitored spectrophotometrically at 814 nm and related to the concentration of nitrite present. The effect of different factors such as acidity, stability of the complex, time, temperature, phosphate concentration, molybdenum concentration, sodium sulfide concentration and the tolerance amount of other ions have been reported. Maximum absorbance is at 814 nm. The range of linearity using the conventional method is 0.5-2.0 ppm with molar absorptivity of 1.1 x 10(4) l mol(-1) cm(-1). and a relative standard deviation of 2.6% for five measurements. The range of linearity using the reaction rate method is 0.2-3.6 ppm with a relative standard deviation of 2.4% for five measurements. The method is applied for determination of nitrite and nitrate in water, meat products and vegetables.     

The nature of the salt error in the Sn(II)-reduced molybdenum blue reaction for determination of dissolved reactive phosphorus in saline waters

Sn(II) is a well-known reductant used in the formation of phosphomolybdenum blue for the determination of dissolved reactive phosphorus (DRP) in waters because it provides rapid and quantitative reduction. However, in saline waters, this method suffers from a salt error which causes a significant decrease in sensitivity. This phenomenon has never been adequately explained in the literature. The Murphy and Riley method, which uses Sb(III) and ascorbic acid for the reduction step, is preferred for DRP determination in saline waters because it is unaffected by salinity, but it exhibits a sensitivity approximately 30% lower than that when Sn(II) is used as the reductant without Cl⁻ interference. This study investigates the processes causing the salt error and possible ways of minimizing it, so that the benefits of Sn(II) reduction on the molybdenum blue reaction rate and sensitivity may be exploited in the determination of low levels of DRP in marine and estuarine waters. It has been established that the salt error is caused by the formation of Sn(IV) chloro-complexes which compete with the formation of Sn(IV)-substituted phosphomolybdenum blue, forcing the reaction to proceed via the much slower, less favourable process of direct reduction that occurs in methods using organic reductants such as ascorbic acid.     

Factorial design for multivariate optimization of preconcentration system for spectrophotometric phosphorus determination

The present paper proposes a preconcentration procedure for phosphorus determination by using ultraviolet-visible spectrophotometer. It is based on the formation of phosphomolybdate and its reduction to molybdenum blue. Phosphorus extraction as phosphomolybdenum blue complex was performed onto Amberlite XAD-4. The optimization step was carried out using two-level full factorial design. Three variables (resin amount, sample volume, flow rate) were regarded as factors in the optimization. The relative standard deviation was 2% at 0.08 μg mL⁻¹. The limit of detection was found to be 2.23 μg L⁻¹ (N = 15). The proposed solid-phase extraction procedure was applied to phosphorus in some fruit leaves, natural waters, and a standard reference material (SRM 1515 apple leaves).     

Structure Characterization and Dephosphorization Effect Analysis of Oyster Shell-silica Micropowder Waste Water Dephosphorization Materials

In this work,the effects of pH value of waste water and initial concentration of phosphorus on dephosphorization materials were investigated.The materials were prepared by shaping,sintering and hydrothermal reshaping oyster shell and silica micro-powder.Different concentrations of phosphorus-contained waste water were simulated with potassium dihydrogen phosphate solution,the effect of dephosphorization was tested with phosphomolybdenum blue spectrophotometer method,and the crystal phase and microstructure of materials were characterized by XRD and SEM methods.It was indicated that dephosphorization was completed in 6 h when the initial phosphorus concentration in waste water was lower than 15 mg/L,and the dephosphorization time prolonged as the increase of phosphorus concentration.It was observed that the pH value of waste water influenced dephosphorization significantly,and neutral subalkalic environment favored dephosphorization.When the pH value was 11,the efficiency of dephosphozation was the greatest.For waste water with an initial concentration of 20 mg/L,the dephosphozation rate is close to 100% in 8 h.     

规则星形高分子之间的相互作用势的自洽场研究

用自洽场理论方法计算了星形高分子之间的相互作用势, 并与标度理论的推测以及基于粒子的分子动力学模拟方法的结果进行了比较. 自洽场理论计算得到的星形高分子之间的二体相互作用势与标度理论推测的结果基本一致: 当两个星形高分子核心之间的距离小于其对应的等效软球的半径R时, 二体相互作用势U与星形高分子核心之间的距离d及官能度f之间的关系为U(d)∝-f 3/2 ln(d/R). 当星形高分子核心间距离较小, 相互作用势与星形高分子核心间距离的对数呈线性关系时, 三体相互作用为吸引作用, 但其强度约等于二体作用的10%. 因此, 以二体作用为基础的基于粒子的模拟方法是基本合理的.     

Preparation and evaluation of a molecularly imprinted sol–gel material as the solid‐phase extraction adsorbents for the specific recognition of cloxacilloic acid in cloxacillin

Highly selective molecularly imprinted polymers on the surface of silica gels were prepared by a sol–gel process and used as solid‐phase extraction adsorbents for the specific recognition, enrichment and detection of cloxacilloic acid in cloxacillin. The obtained polymers were characterized by scanning electron microscopy, FTIR spectroscopy, nitrogen adsorption and desorption, elemental analysis and thermogravimetric analysis. The imprinted polymers not only possessed high adsorption capacity (6.5 μg/mg), but also exhibited fast adsorption kinetics (they adsorb 80% of the maximum amount within 20 min) and excellent selectivity (the imprinted factor was 3.6). A method using the imprinted polymers as solid‐phase extraction adsorbents coupled with high‐performance liquid chromatography was established with good specificity, linearity (r = 0.9962), precision (ranging from 0.5 to 6.7%), accuracy (ranging from 93.9 to 97.7%) and extraction recoveries (ranging from 78.8 to 89.8%). The limits of detection and quantification were 0.07 and 0.25 mg/g, respectively. This work could provide a promising method in the enrichment, extraction and detection of allergenic impurities in the manufacture, storage and application of cloxacillin.     

微波消解-磷钼蓝分光光度法测定城市污泥中总磷浓度

建立了微波消解-磷钼蓝分光光度法测定城市污泥中总磷的方法。在微波环境中硝酸-过氧化氢能够将城市污泥中无机磷盐和含磷有机物消解为正磷酸盐,在弱酸性条件下,正磷酸盐在铋盐的催化条件下与钼酸铵-抗坏血酸生成磷钼蓝,于分光光度计波长690nm处进行测定总磷浓度。方法的相对标准偏差0.63%～0.95%,加标回收率为101%～102%,能够满足对城市污泥中总磷浓度的测定要求。     

Synthesis of π‐conjugated network polymers based on fluoroarene and fluorescent units via direct arylation polycondensation and their porosity and fluorescent properties

In this study, we report the synthesis of π‐conjugated network polymers including unique fluorescent units via palladium‐catalyzed direct (C? H) arylation polycondensation of 1,2,4,5‐tetrafluorobenzene with tetrabromoarenes. The obtained polymers, including tetraphenylethene (TPE) or pyrene (PYR) units, had microporous structures with the specific Brunauer–Emmett–Teller (BET) surface areas at 508 and 824 m² g^?1, respectively. These polymers possessed narrow pore distributions (<15 nm). These analyses supported that π‐conjugated microporous polymers (CMPs) were synthesized by the direct arylation. Similar to the result of BET surface areas, carbon capture capacity of CMP based on PYR unit was higher than that of CMP based on TPE unit. Because the nitrogen capture capacity of these CMPs was low (≈ 0), selectivity of carbon dioxide adsorption was very high. TPE is a typical aggregation‐induced emission unit but PYR is an aggregation‐caused quenching (ACQ) molecule. The incorporation of TPE unit into the microporous polymer gave green‐colored fluorescence (Φ = 0.12). The polymer including PYR units also showed the green‐colored fluorescence (Φ = 0.05) even though the ACQ property. These synthesized CMPs exhibited characteristic solvatofluorochromism. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3862–3867     

Application of organic solvent-soluble membrane filters in the preconcentration and determination of trace elements: spectrophotometric determination of phosphorus as phosphomolybdenum blue

A simple and rapid preconcentration technique, based on collecting trace elements on a membrane filter and dissolving the membrane filter in an organic solvent, has been applied to the spectrophotometric determination of phosphorus in water. Phosphorus, 0.5-7 mug in 50-500 ml of water sample, is collected as phosphomolybdenum blue on a nitrocellulose or acetylcellulose membrane in the presence of n-dodecyltrimethylammonium bromide, the membrane is dissolved in 5 ml of dimethyl-sulphoxide (DMSO), and the absorbance of the DMSO solution is measured at 710 nm against a reagent blank. Moderate concentrations of silicate, anionic and non-ionic surfactants and high concentrations of sodium chloride do not interfere. Interference from arsenate can be eliminated by reducing the arsenate to arsenite. Condensed and organic phosphates can be determined if they are first converted into orthophosphoric acid by digestion with persulphate. The limit of determination is 0.002 mug of phosphorus in 100 ml of sample.     

Synthesis and characterization of soluble conjugated polymers having pyrene moiety in the main chain

Three new alternating conjugated polymers consisting of pyrene and 3‐dodecylthiophene ( PPyMT ), 4,4′‐didodecyl‐2,2′‐bithiophene ( PPyBT ), or 9,9‐didodecylfluorene ( PPyFlu ) moieties have been prepared using Suzuki coupling reaction or Sugimoto approaches. The polymers were readily soluble in common organic solvents and exhibited good thermal stability in nitrogen and air atmospheres. The structures and optical properties of the polymers were characterized by NMR, FTIR, XRD, UV–vis, and fluorescence spectroscopy. PPyMT and PPYBT showed blue‐light emission in solution, whereas PPyFlu performed blue‐light emitting in film state. The polymers exhibited an intermolecular aggregation and structural ordering due to pyrene–pyrene π–π stacking interaction. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Phosphomolybdic acid as a reagent for the spectrophotometric determination of certain phenothiazine derivatives of pharmaceutical products

Phosphomolybdic acid is used as reagent for colorimetric determination of phenothiazine derivatives in various pharmaceutical products. The reagent oxidizes the derivative to a cationic free radical, with which it then forms a coloured salt. The method is simple and rapid. A preliminary extraction is necessary if certain reductants (sulphite or ascorbic acid) are present as stabilizers of the pharmaceuticals, as otherwise they reduce the reagent to phosphomolybdenum blue.     

Preparation and evaluation of temperature and magnetic dual‐responsive molecularly imprinted polymers for the specific enrichment of formononetin

Thermo‐responsive magnetic molecularly imprinted polymers were prepared by simple surface molecular imprinting polymerization for the selective adsorption and enrichment of formononetin from Trifolium pretense by temperature regulation. Using formononetin as a template, N‐isopropylacrylamide as the thermo‐responsive functional monomer, and methacrylic acid as an assisting functional monomer, the polymers were synthesized on the surface of the magnetic substrate. The results show that imprinted polymers attained controlled adsorption of formononetin in response to the temperature change, with large adsorption capacity (16.43 mg/g), fast kinetics (60 min) and good selectivity at 35°C compared with that at 25 and 45°C. The selectivity experiment indicated that the materials had excellent recognition ability for formononetin and the selectivity factors were between 1.32 and 2.98 towards genistein and daidzein. The excellent linearity was attained in the range of 5–100 μg/mL, with low detection limits and low quantitation limits of 0.017 and 0.063 μg/mL, respectively. Furthermore, the thermo‐responsive magnetic molecularly imprinted polymers were successfully utilized for enriching and purifying formononetin from Trifolium pretense. The analytical results indicate that the imprinted polymers are promising materials for selective identification and enrichment of formononetin in complicated herbal medicines by simple temperature‐responsive regulation.     

Modified poly(phenylene oxide) membranes for the separation of carbon dioxide from methane

Two types of poly(phenylene oxide) (PPO) membranes were prepared: one by chemical modification through sulfonation using chlorosulfonic acid and another by physical incorporation with a heteropolyacid (HPA), viz., phosphotungstic acid. These membranes were tested for the separation of CO₂/CH₄ mixtures. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction techniques were used to confirm the modified structure of PPO as well as to understand its interactions with gaseous molecules. Scanning electron microscopy (SEM) was used to investigate the membrane morphology. Thermal stability of the modified polymers was assessed by differential scanning calorimetry (DSC), while the tensile strength was measured to evaluate their mechanical stability. Both chemical and physical modifications did not adversely affect the thermally and mechanical stabilities. Experiments with pure CO₂ and CH₄ gases showed that CO₂ selectivity (27.2) for SPPO increased by a factor of 2.2, while the PPO–HPA membrane exhibited 1.7 times increase in selectivity with a reasonable permeability of 28.2 Barrer. An increase in flux was observed for the binary CO₂/CH₄ mixture permeation with an increasing feed concentration (5–40 mol%) of CO₂. An enhancement in feed pressure from 5 to 40 kg/cm² resulted in reduced CO₂ permeability and selectivity due to the competitive sorption of methane. Both the modified PPO membranes were found to be promising for enrichment of methane despite exhibiting lower permeability values than the pristine PPO membrane.     

Sul-containing fluorinated polyimides for optical waveguide device

Novel sul-containing fluorinated polyimides have been synthesized by the reaction of 2,2′-bis-(trifluoromethyl)-4,4′-diaminodiphenyl sulfide (TFDAS) with 1,4-bis-(3,4-dicarboxyphenoxy)benzene dianhydride (HQDPA), 2,2′-bis-(3,4-dicarboxyphenyl)hexafluoropropane dianhydride (6FDA), 4,4′-oxydiphthalicanhydride (ODPA) or 3,4,3′,4′-biphenyl-tetracarboxylic acid dianhydride (s-BPDA). The fluorinated polyimides, prepared by a one-step polycondensation procedure, have good solubility in many solvents, such as N-methyl-2-pyrrolidinone (NMP), dimethylacetamide (DMAc), dimethyl sulfoxide (DMSO), cyclohexanone, tetrahydrofuran (THF) and m-cresol. The molecular weights (M_n's) and polydispersities (M_n/M_w's) of polyimides were in the range of 1.24 × 10⁵ to 3.21 × 10⁵ and 1.59–2.20, respectively. The polymers exhibit excellent thermal stabilities, with glass-transition temperatures (T_g) at 221–275 °C and the 5% weight-loss temperature are above 531 °C. After crosslinking, these polymers show higher thermal stability. The films of polymers have high optical transparency. The novel sul-containing fluorinated polyimides also have low absorption at both 1310 and 1550 nm wavelength windows. Rib-type optical waveguide device was fabricated using the fluorinated polyimides and the near-field mode pattern of the waveguide was demonstrated.     

Polyfluorenes containing tetraphenylthiophene segments: Synthesis,photophysics, and electroluminescence

2,5‐Bis(4‐bromophenyl)‐3,4‐diphenylthiophene was synthesized from benzyl chloride and sulfur and through the subsequent bromination of the intermediate 2,3,4,5‐tetraphenylthiophene. It was condensed with 2,7‐dibromo‐9,9‐dihexylfluorene via a nickel‐mediated Yamamoto coupling reaction to afford a new series of statistical copolymers with various compositions. In addition, poly(9,9‐dihexylfluorene) (PF) was synthesized under the same conditions for comparison. All the polymers were soluble in common organic solvents such as tetrahydrofuran (THF), chloroform, and dichloromethane. Their glass‐transition temperatures increased with an increase in the tetraphenylthiophene (TPT) content in the polymers, and they were 63–149 °C. The solutions of the polymers in THF emitted intense blue light with a photoluminescence maximum at 418–440 nm and quantum yields of 0.32–0.62. Thin films of the polymers with TPT fractions lower than 20 mol % emitted blue‐green light with two well‐resolved peaks at 445 and 520 nm and an optical band gap of about 2.85 eV. A thin film of the polymer with aTPT fraction of 50 mol % emitted pure blue light with a maximum at 419 nm and an optical band gap of 3.28 eV. An enhancement of the light‐emitting‐diode brightness by a factor of ～8 with respect to that of PF was achieved in apolymer containing 5 mol % TPT. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4015–4026, 2006     

新型磁性限进分子印迹复合材料的制备及富集性能

采用浸渍热解法制备磁性凹凸棒土(MATP), 以磺胺二甲氧嘧啶(SDM)为模板分子, 4-乙烯基吡啶(4-VP)为功能单体, 采用反相原子转移自由基聚合(RATRP)法在MATP表面包覆印迹聚合物薄膜, 得到磁性分子印迹聚合物(MATP-MIPs), 最后在MATP-MIPs表面接枝亲水性单体甲基丙烯酸羟乙酯(HEMA), 得到新型磁性限进分子印迹复合材料(MATP-RAM-MIPs). 采用傅里叶变换红外光谱(FTIR)仪、 扫描电子显微镜(SEM)、 热重分析(TGA)仪、 振动样品磁强计(VSM)和X射线衍射(XRD)仪对材料进行了表征. 通过静态水接触角和考马斯亮蓝G-250方法证明材料外表面具有良好的亲水性和排阻蛋白的特性; 采用静态和选择性吸附实验证实MATP-RAM-MIPs对SDM具有良好的吸附选择性和较高的吸附容量. 将该材料直接用于牛血清中磺胺类药物的富集分离, 加标回收率为86.2%~100.6%, 相对标准偏差为2.1%~4.2%, 可见该材料在复杂样品前处理中具有良好的实际应用价值.     

可交联聚甲基丙烯酸甲酯的合成、表征及在阵列式波导光栅中的应用

合成了含环氧基团的可交联的甲基丙烯酸甲酯和甲基丙烯酸环氧丙酯的共聚物[Poly(MMA-co-GMA)],通过FTIR,NMR,GPC,DSC和AFM等技术对其进行了表征. 结果表明,所合成的聚合物材料具有较好的成膜性; 通过热固化使引入的环氧基团开环交联,该聚合物的玻璃化转变温度(Tg)比固化前提高了24 K,同时有效地降低了聚合物的双折射率. 用Poly(MMA-co-GMA)作为包层材料,双酚A型环氧化合物作为高折射率材料, 将其引入到包层材料中形成芯层材料的折射率在波长1.55 μm处可调,其范围是1.483~1.588. 采用旋涂、 铝掩膜和氧反应离子刻蚀的方法(RIE)制得了阵列式光波导. 测试结果表明,制作的波导在1.55 μm处实现了光的单模传输,光损小于3.0 dB/cm.      

Escherichia coli: Dominance of Red Light over Other Visible Light Sources in Establishing Viable but Nonculturable State

In this study, the effect of UV-A and different wavelengths of visible light irradiations combined with or without a photosensitizer (methylene blue, MB) on the establishment of viable but nonculturable (VBNC) state in Escherichia coli was investigated. Survival of the E. coli was investigated by measuring plate counts, respiring cell count (RCC), direct viable count (DVC) and total counts over a period of up to 72 h. The inhibition rates of various light sources in the presence or absence of MB on E. coli in seawater were ranked in the order UV-A>red light>white light>blue light>green light (from greatest to least activation). E. coli survived for 10.2, 19.0, 21.3 and 24.04 h under exposure to red, white, blue and green light and for 6.8 h under exposure to UV-A in the presence of MB according to t ₉₉ . Although the VC declined to undetectable levels in a relatively short time, the RCC showed that some cells were still capable of respiration and, therefore, are assumed to have entered the VBNC phase. This is the first time that red light has been shown to have a stronger effect on E. coli survival and VBNC than white, green and blue light in seawater environment.