Synthesis and characterization of poly(vinylpyrrolidone-co-vinylphosphonic acid) copolymers

Radical copolymerizations of 1-vinyl-2-pyrrolidone (VP) with vinylphosphonic acid (VPA) at different feed ratios were investigated. The copolymers were characterized by ¹H-NMR, ¹³C-NMR and FT-IR. The copolymer composition was determined from the elemental analysis. Thermogravimetric analysis (TG) illustrates that the copolymers are stable up to 200 °C. Temperature dependence of the alternating current (AC) conductivities were investigated by means of impedance spectroscopy. The direct current (DC) conductivities of the samples are derived from the AC conductivity data.     

Controlled synthesis and functionalization of PEGylated methacrylates bearing cyclic carbonate pendant groups

Homopolymer bearing cyclic carbonate (CC) group, ABA type triblock copolymers, and (AC)B(AC) type terpolymers with statistical arrangement of A and C monomers bearing side chain CC groups are reported here. Difunctional poly(ethylene glycol) macroinitiators (PEGMIs) were prepared from PEG of three different molecular weights. PEGMIs were subsequently used for the preparation of polymers bearing CC pendant groups from cyclic carbonate methacrylate (CCMA) under atom transfer radical polymerization to yield polymers with low polydispersity index. Homopolymer and ABA type triblock copolymers were obtained by polymerizing CCMA monomer and (AC)B(AC) type statistical terpolymers were obtained when methyl methacrylate was included as a comonomer. No polymer was obtained when styrene was used as comonomer. The cyclic carbonate groups were subjected to ring‐opening reaction with monoamine to yield side chain hydroxyurethane polymers with increased solubility and diamines to yield crosslinked insoluble materials. Changes in wettability characteristics were studied by following the water contact angle of the polymers before and after ring‐opening reaction involving the cyclic carbonate pendant group. The polymers which composed of electrolyte in the form of PEG and coordinating species in the form of pendant cyclic carbonate groups showed conductivity in the range of 2–5 × 10^?6 Scm^?1 at 23 °C after doping with lithium bis(trifluoromethane)sulfonimide as characterized by impedance spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1622–1632, 2010     

Study of Multi-Site Nature of Supported Ziegler-Natta Catalysts in Ethylene-Hexene-1 Copolymerization

Summary: Heterogeneity of active centers (AC) of titanium-magnesium catalysts (TMC) and vanadium-magnesium catalyst (VMC) in ethylene-hexene-1 copolymerization has been studied on the base of data of polymer molecular weight distribution (MWD) deconvolution technique and copolymer fractionation onto narrow fractions. It was found that 3 and 4 Flory components (groups of active centers) are required to describe experimental MWD curves of copolymers produced over TMC with different Ti content. In the case of VMC MWD of homopolymer and copolymer are characterized by set of 5 Flory components (5 groups of AC). Different character of inter-relationship between MW and short chain branching (SCB) was found for ethylene-hexene-1 copolymers produced over different catalysts: heterogeneous type in the case of TMC and more uniform for copolymer prepared over VMC. The content of Ti affects on the slope of that profile in copolymers produced over TMC. The results indicated that TMC and VMC are different greatly on the heterogeneity of active centers to the formation of polymers with different molecular weights and to formation of copolymers with different inter-relationship between MW and short chain branching. TMC produces polymers with more narrow MWD but it contains highly heterogeneous centers regarding comonomer reactivity ratios. VMC produces polymers with broad and bimodal MWD but it contains more homogeneous centers regarding comonomer reactivity ratios.     

裂解色谱法分析苯乙烯-丙烯酰胺共聚物

本文报道了用裂解色谱法分析一种新型的苯乙烯-丙烯酰胺共聚物的研究结果。考察了裂解温度、共聚物组成同主要裂解产物之间的相关性。提出了用相关曲线对不同类型共聚物的组成进行定量测定和鉴别的方法。讨论了由于分子链结构的差别导致无规和嵌段共聚物的不同的裂解行为。     

Precise synthesis of thermo-responsive and water-soluble star-branched polymers and star block copolymers by living anionic polymerization

A series of thermo-responsive and water-soluble 4- and 8-arm star-branched poly(2-(2′-methoxyethoxy)ethyl methacrylate) (poly(1)) with well-defined structures were synthesized by living anionic polymerization of 1, followed by a linking reaction with a core compound substituted with either four or eight benzyl bromide moieties. Furthermore, two kinds of sequentially different 4-arm star block copolymers composed of poly(1)-block-poly ((2,2-dimethyl-1,3-dioxolan-4-yl)methyl methacrylate) (poly(4)) were also synthesized by the same linking reaction of the corresponding AB or BA diblock copolymer anion with a core compound substituted with four benzyl bromide moieties. Thus, both well-defined 4-arm (AB)₄ and (BA)₄ star-block copolymers, whose A and B are poly(1) and poly(4) segments, were successfully synthesized. These star-block copolymers were quantitatively converted to the corresponding 4-arm (AC)₄ and (CA)₄ star-block copolymers with the same compositions by hydrolytic acetal cleavage of the poly(4) segment to poly(2,3-dihydroxypropyl methacrylate) (C segment). Poly(1) segments have LCST values and, on the other hand, both water-insoluble poly(4)s and water-soluble poly(2,3-dihydroxypropyl methacrylate)s are non-thermo-responsive segments. The thermo-responsive behavior of the resulting 4- and 8-arm star-branched poly(1) as well as the 4-arm (AB)₄, (BA)₄, (AC)₄, and (CA)₄ star-branched block copolymers has been extensively studied in terms of molecular weight, arm number, composition, and block sequence. As expected, such variables were observed to affect their LCST values. Interestingly, the thermo-responsive behavior of the 4-arm (AC)₄ and (CA)₄ stars was different from that of the block copolymers used as arm segments.     

Advanced analytical methods for the structure elucidation of polystyrene-b-poly(n-butyl acrylate) block copolymers prepared by reverse iodine transfer polymerisation

Reverse iodine transfer polymerisation (RITP) is a living radical polymerisation technique that has shown to be feasible in synthesising segmented styrene-acrylate copolymers. Polymers synthesised via RITP are typically only described regarding their bulk properties using nuclear magnetic resonance spectroscopy and size exclusion chromatography. To fully understand the complex composition of the polymerisation products and the RITP reaction mechanism, however, it is necessary to use a combination of advanced analytical methods. In the present RITP procedure, polystyrene was synthesised first and then used as a macroinitiator to synthesise polystyrene-block-poly(n-butyl acrylate) (PS-b-PBA) block copolymers. For the first time, these PS-b-PBA block copolymers were analysed by a combination of SEC, in situ¹H NMR and HPLC. ¹H NMR was used to determine the copolymer composition and the end group functionality of the samples, while SEC and HPLC were used to confirm the formation of block copolymers. Detailed information on the living character of the RITP process was obtained.     

Separation and Characterization of Ethylene-Propylene Copolymers by High-Temperature Gradient HPLC Coupled to FTIR Spectroscopy

Summary: The chromatographic separation of ethylene-propylene (EP) copolymers with regard to chemical composition was accomplished by a new technique - high- temperature gradient HPLC. Using a mobile phase of ethylene glycol monobutylether (EGMBE) and 1,2,4–trichlorobenzene (TCB), and silica gel as the stationary phase, copolymers with different ethylene contents were separated according to their chemical compositions. Using a sample solvent of n-decanol and a column temperature of 140 °C, chromatographic conditions were established that correspond to separation in a precipitation-redissolution mechanism. With the aim to obtain further information on the separation process, the HPLC system was coupled to FTIR spectroscopy through a LC-Transform interface. The FTIR data confirmed that the copolymers were separated according to the ethylene content of the eluted samples.     

具生物活性的快速光交联生物可降解水凝胶的设计合成

采用开环聚合方法合成了一系列水溶性生物可降解的低聚(丙交酯-co-丙烯酸酯碳酸酯)-b-聚乙二醇-b-低聚(丙交酯-co-丙烯酸酯碳酸酯)(OLAC-PEG-OLAC)三嵌段共聚物,并通过光交联方法方便制备得到具生物活性的新型生物可降解水凝胶.流变测试表明水凝胶储存模量(170～10000 Pa)和凝胶时间(0.8～8min)均可通过调节丙烯酸酯碳酸酯(AC)单元数、聚合物浓度及光引发剂浓度等得到控制.降解实验表明水凝胶的降解速率可通过改变AC和丙交酯(LA)单元数进行调控.含巯基的生物活性分子如RGDC短肽可通过迈克尔加成反应直接链接到OLAC-PEG-OLAC上,由此可方便制备可注射性的具生物活性的生物可降解水凝胶.MG63成骨细胞实验表明RGDC短肽功能化的OLAC-PEG-OLAC水凝胶可很好地促进细胞黏附和生长.该快速光交联生物可降解水凝胶以其优异的凝胶、降解和生物功能化等性能可望为生物组织工程提供理想的三维活性多孔支架.     

Controlled synthesis of carboxylic acid end‐capped poly(heptadecafluorodecyl acrylate) and copolymers with 2‐hydroxyethyl acrylate

1H,1H,2H,2H‐Heptadecafluorodecyl acrylate (AC8) was polymerized by reversible addition–fragmentation chain transfer and copolymerized with 2‐hydroxyethyl acrylate with the formation of random and block copolymers, respectively. The kinetics of the (co)polymerization was monitored with ¹H NMR spectroscopy and showed that the homopolymerization and random copolymerization of AC8 were under control. As a result of this control and the use of S‐1‐dodecyl‐S‐(α,α′‐dimethyl‐α″‐acetic acid)trithiocarbonate as a chain‐transfer agent, the copolymer chains were end‐capped by an α‐carboxylic acid group. Moreover, the controlled polymerization of AC8 was confirmed by the successful synthesis of poly(1H,1H,2H,2H‐heptadecafluorodecyl acrylate)‐b‐poly(2‐hydroxyethyl acrylate) diblock copolymers, which were typically amphiphilic compounds. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1499–1506, 2007     

Solid acid clay mediated copolymerization of methyl acrylate and 1‐octene: 2D NMR substantiation of predominant alternating comonomer sequence

Montmorillionite K10 powder presence during radically initiated copolymerization of methyl acrylate (M) and 1‐octene (O) gave copolymers with higher incorporation of alkene unit. Highly viscous and transparent copolymers showed alternation irrespective of the copolymer composition. Increasing the amount of K10 powder increased the total percentage conversion, as well as 1‐octene incorporation. The monomodal curves obtained in gel permeation chromatography (GPC) substantiated that true copolymers were formed. The alternation in the copolymers was authenticated through Heteronuclear Multiple Quantum Correlation (HMQC) experiments in conjugation with Total Correlated Spectroscopy (TOCSY). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2156–2162, 2009     

Studies on the porous structure of di(methacryloyloxymethyl) naphthalene-divinylbenzene copolymers by inverse exclusion chromatography

Summary Using inverse exclusion chromatography the porous structure of the copolymers of di(methacryloyloxymethyl)naphthalenes and divinylbenzene was investigated.In order to determine the pore size distributions of the copolymers, toluene, alkylphenones, phthalates and polystyrene standards were used as the probes.The measurements proved that the existence of micropores depend on the method of copolymerization. The copolymers obtained by suspension and emulsion methods are more or less microporous, but the copolymer prepared by thermal polymerization in mass does not include micropores in its internal structure.     

Chromatographic characterization of amphiphilic di‐ and tri‐block copolymers of poly(ethylene oxide) and poly(ε‐caprolactone)

Amphiphilic di‐ and tri‐block copolymers based on poly(ethylene oxide) as a hydrophilic segment and poly(ε‐caprolactone) as a hydrophobic part are synthesized by the ring‐opening polymerization of ε‐caprolactone while using poly(ethylene glycol)s and methoxy poly(ethylene glycol)s of varying molar masses as macro‐initiators. The synthesized block copolymers are characterized with respect to their total relative molar mass and its distribution by size exclusion chromatography. Liquid chromatography at critical conditions of both blocks is established for the analysis of individual block lengths and tracking presence of unwanted homopolymers of both types in the block copolymer samples. New critical conditions of polycaprolactone on reversed phase column are reported using organic mobile phase. The established critical conditions of polycaprolactone extended the applicable molar mass range significantly compared to already reported critical conditions of polycaprolactone in aqueous mobile phase. Block copolymers are also analyzed at critical conditions of poly(ethylene glycol). Complete analysis of the di‐ and tri‐block copolymers at corresponding critical conditions provided a fair estimate of molar mass of non‐critical block besides information regarding presence of homopolymers of both types in the samples.     

三烯丙基异氰尿酸酯交联共聚物的研究(Ⅱ)——醇解物的制备、结构及其性能

将醋酸乙烯酯与三烯丙基异氰尿酸酯共聚物进行皂化制得含有羟基和羧基盐的共聚物以增强共聚物的亲水性,用作气相色谱固定相,考察了不同交联度对皂化反应的影响,测定了皂化后共聚物的孔结构参数及溶胀性能,并对该固定相的色谱性能进行评价。     

New Chromatographic and Hyphenated Techniques for Hydrophilic Copolymers

Most synthetic polymers are distributed in more than one parameter of molecular heterogeneity. For hydrophobic copolymers there are different chromatographic techniques available to analyse these distributions. As a result of the increasing interest in hydrophilic polymers and copolymers new chromatographic techniques are developed for the characterization of these polymers as well. However, very frequently these polymers contain highly polar or charged functional groups making them soluble only in aqueous mobile phases. There are several problems related to the use of aqueous mobile phases in polymer chromatography. Even the SEC analysis of such copolymers is not straightforward. As for HPLC in aqueous mobile phases, there are only a few applications in the literature so far. In addition to the fact that only a very limited number of stationary phases is available for aqueous HPLC of polymers, the interactions of polyelectrolytes in such chromatographic systems are not well understood. The present paper addresses the problems related to the application of SEC and HPLC in aqueous mobile phases. For graft copolymers with a polyethylene oxide backbone, e.g. PEG-g-polymethacrylic acid and PEG-g-polyvinyl alcohol, it will be shown that methods can be developed that give accurate molar mass and chemical composition information. Two-dimensional chromatography where aqueous HPLC and SEC are coupled on-line will be shown to be the most powerful analysis tool for the analysis of such copolymers. The hyphenation of the chromatographic separation techniques with spectroscopic detection techniques provides further insight into the molecular complexity of these copolymers.     

Synthesis and drug controlled release of block copolymers of poly(l-lactide) with poly(d,l-lactide) and related monomers

Four types of new biodegradable block copolymers AB, ABA, AC and AD, where A is poly(L-lactide) (PLLA), B is poly(D, L-lactide) (PDLLA), C is poly(p-dioxanone) (PDON) and D is poly(ϵ-caprolactone) (PCL) with different block lengths were synthesized and characterized by GPC, IR, ¹H-NMR and DSC. There are phase-separated and biodegradable block copolymers. Their in vitro biodegradation rates with the change of composition ratio were studied as well as the biodegradation rates of homopolymers with the series as PDON > PDLLA > PLLA in parallel with their crystallinities, i.e. from amorphous to semicrystalline. All these block copolymers were used as matrix to test their controlled release behavior of levo-norgestrel (LNG) in the form of microspheres through solvent evaporation preparation with thoroughly long-time washing to minimize the generally occurring bursting effect. As a result all of them showed almost constant rate of release even from the initial stage,     

Separation of copoly(styrene/acrylonitrile) samples according to composition under reversed phase conditions

Summary Copoly(styrene/acrylonitrile) samples (S/AN) have been repeatedly separated according to composition by gradient HPLC with alkane hydrocarbons as a starting eluent A and dichloromethane (DCM) or tetrahydrofuran (THF) as a solvent B. In these systems, retention increased with AN content of the copolymers. The chemical nature of the column packings used had almost no influence on the retention of S/AN samples. The present paper shows thatn-pentane andn-heptane, when used in a given volumetric gradient with DCM+20% methanol as a solvent B, lead to identical solution characteristics of S/AN on silica columns. A similar result was obtained on C18 columns withn-heptane or cyclohexane, whereas gradient elution with toluene as a starting eluent caused insufficient resolution. Reversed phase separation of S/AN copolymers could be achieved on polystyrene gel columns through gradients with methanol as a starting eluent and DCM or THF as a solvent B. In both systems, retention decreased with increasing AN content of the copolymers. The elution characteristics were almost linear in the range 0–20 wt% AN. This behaviour can be understood in the context of polymer solubility: in both systems, the solubility borderline of S/AN has a distinct maximum at about 25 wt% AN. Reversed phase separation was achieved at the lefthand slope of these curves where the dissolution of a sample with a higher AN content requires less DCM or THF solvent than the dissolution of copolymers which are poorer in AN. This idea predicts that samples with more than 25 wt% AN should elute later than S/AN whose composition is near to the solubility maximum. This indeed was found with a copolymer containing 36.2 wt% AN.     

Theory of chromatographic separation of linear and star-shaped binary block-copolymers

Equations for the distribution coefficient of heteroarm stars are derived by using a model of an ideal chain in a slit-like pore; these equations together with those previously reported for linear block-copolymers are applied to describe chromatography of such copolymers. According to the theory, the retention generally depends on molar mass, composition, and architecture (microstructure and topology) of copolymers, on pore size and on adsorption interaction of chain units A and B. Three special modes of chromatography are studied in detail. (i) If interactions for A and B are close to the critical point of adsorption (CPA), the retention practically does not depend on architecture, and high molar mass copolymers can be separated by composition. (ii) At SEC condition for B and strong adsorption for A, copolymers in principle can be separated by architecture; better separation is expected in wide pores. Retention of linear block-copolymers decreases with increasing of the number of blocks; for heteroarm stars the theory predicts retention decreasing as: AB > StarAAB > StarABB; StarAAAB > StarABBB > StarAABB; StarAAAAB > StarABBBB > StarAAABB > StarAABBB. (iii) At the CPA for B copolymers AB, BAB and heteroarm stars regardless molar mass of B, M(B), can be separated by M(A). The same is true for ABA and ABAB...A in narrow pores. While the retention of AB, BAB, Star AB...B and StarAAB...B is the same, copolymers AB, ABA and linear multiblock-copolymers can be separated, as well as symmetric and very asymmetric triblock-copolymers ABA.     

Water-soluble poly(n-vinylamides)as a basis for the synthesis of polymeric carriers of biologically active compounds

The method for preparation of copolymers of N-vinylpyrrolidone (VP) and N-vinylamine (VA) with high yield were developed; the method involves radical copolymerization of VP with N-vinylformamide(VFA) followed by the removal of formyl protecting group in the presence of inorganic acids. The optimal conditions for synthesis of copolymers with predefined compositions and molecular masses were determined. The influence of temperature, concentrations of reactants, and the nature of an acid on the rate of formyl group removal was estimated. Spectral and chromatographic methods of analytical control of the contents of residual monomers and formic acid (which forms during acidic hydrolysis of the copolymer) were developed.     

Analysis of polystyrene-b-polyisoprene copolymers by coupling of liquid chromatography at critical conditions to NMR at critical conditions of polystyrene and polyisoprene

For the investigation of the molecular heterogeneity of polystyrene-b-polyisoprene block copolymers, a chromatographic separation method, namely liquid chromatography at critical conditions was developed. This method was coupled on-line with (1)H-NMR(where NMR stands for nuclear magnetic resonance) for the comprehensive analysis of the polystyrene-b-polyisoprene copolymers. The copolymers were synthesized by two different methods: sequential living anionic polymerization and coupling of living precursor blocks. While (1)H-NMR allows just for the analysis of the bulk chemical composition of the block copolymers, the coupling with liquid chromatography at critical conditions provides selective molar mass information on the polystyrene and polyisoprene blocks within the copolymers. The polyisoprene block molar mass is determined by operating at chromatographic conditions corresponding to the critical point of adsorption of polystyrene and size exclusion chromatography mode for polyisoprene. The molar mass of the polystyrene block is determined by operating at the critical conditions of polyisoprene. In addition to the molar mass of each block of the copolymers, the chemical composition distribution of the block copolymers was determined. By using the coupling of liquid chromatography at critical conditions to (1)H-NMR, one can also detect the homopolymers formed during synthesis. Finally the microstructure of the polyisoprene block in the copolymers was evaluated as a function of molar mass.     

Advanced Characterization of Propylene-Based Copolymers and Olefin Block Copolymers

Summary: The newly developed interactive separation of polyolefins by high temperature liquid chromatography (HTLC) provides new information about the chemical composition distribution of polyolefin elastomers. The technique has the advantage of being quantitative in its separation, and has high resolution for the separation of polyolefins by their chemical composition without influence by cocrystallization. Chemical composition distributions can be determined for individual polymers and blends which contain the full range of comonomer typically present in polyethylene and poylypropylene homopolymers, semi-crystalline copolymers, and amorphous copolymers. HTLC analysis in combination with the other fractionation techniques, such as DSC, TREF, NMR, and xylene fractionation, can be used to estimate the amount of olefin block copolymer present in a block composite produced by chain shuttling catalysis.