Ampholyte polystyrene spheres self-regulated deposition of noble metal nanoparticles for catalyst applications

The polystyrene (PS) spheres having dual functional groups were synthesized using emulsifier-free emulsion polymerization based on St/potassium persulfate/water system in the presence of V-50 as co-initiator. Fourier transform infrared (FTIR) confirms the presence of the sulfate and the amino groups on the surfaces of PS spheres. Transmission electron microscopy and X-ray photoelectron spectra revealed that the PS spheres were successfully deposited with catalytic palladium (Pd) or gold (Au) nanoparticles (NPs). The reduction of 4-nitroaniline to 4-phenylenediamine used as a model reaction was performed for catalysis studies and examined by ultraviolet. It was found that both Au and Pd PS dispersions show high catalytic activity. The Pd PS dispersion of 200 μl with only Pd content of 1.09 wt.% exhibits an excellent catalytic effect superior to the commercial Pd/C catalyst, i.e., less than 35 s taken for the completion of the reduction of 4-nitroaniline.     

Synthesis of Hollow Mesoporous TiO2 Microspheres with Single and Double Au Nanoparticle Layers for Enhanced Visible‐Light Photocatalysis

A facile method was used to prepare hollow mesoporous TiO₂ and Au@TiO₂ spheres using polystyrene (PS) templates. Au nanoparticles (NPs) were simultaneously synthesized and attached on the surface of PS spheres by reducing AuCl₄^? ions using sodium citrate which resulted in the uniform deposition of Au NPs. The outer coating of titania via sol‐gel produced PS@Au@TiO₂ core–shell spheres. Removing the templates from these core–shell spheres through calcination produced hollow mesoporous and crystalline Au@TiO₂ spheres with Au NPs inside the TiO₂ shell in a single step. Anatase spheres with double Au NPs layers, one inside and another outside of TiO₂ shell, were also prepared. Different characterization techniques indicated the hollow mesoporous and crystalline morphology of the prepared spheres with Au NPs. Hollow anatase spheres with Au NPs indicated enhanced harvesting of visible light and therefore demonstrated efficient catalytic activity toward the degradation of organic dyes under the irradiation of visible light as compared to bare TiO₂ spheres.     

Polymer‐Supported Bimetallic Ag@AgAu Nanocomposites: Synthesis and Catalytic Properties

Supported noble bimetallic nanomaterials have attracted great interest owing to their applications in catalysis. Herein, polystyrene‐supported Ag@AgAu bimetallic nanocomposites were synthesized by using a seed‐growth route. The size and degree of coverage of the Ag@AgAu NPs could be controlled by changing the experimental parameters. SEM, TEM, STEM, EDS, and XPS analysis was used to characterize the morphology, structure, and composition of these nanocomposites. We found that the bimetallic nanoparticles on the polystyrene beads had a core–shell structure that was comprised of a Ag core and a AgAu alloy shell. The optical properties of the nanocomposites were also studied by UV/Vis/NIR spectroscopy, which indicated that the localized surface plasmon resonance (LSPR) absorptions of the nanocomposites could be tailored over a large scale from 450 nm to 950 nm. The catalytic properties of the nanocomposites were studied by using the reduction of 4‐nitrophenol (4‐NP) by NaBH₄ as a model system. The results showed that the catalytic activity of the polystyrene‐supported Ag@AgAu bimetallic nanocomposites was remarkably superior to that of polystyrene‐supported monometallic Ag and Au nanocomposites with the same nanoparticle size. In addition, an investigation of the recycling catalytic activity of the PS‐Ag@AgAu nanocomposites revealed that the catalyst possessed good stability. The enhancement of the catalytic activity was proposed to be due to the ligand and strain effects between Ag and Au.     

Alkylaminosilane‐Assisted Simultaneous Etching and Growth Route to Synthesise Metal Nanoparticles Encapsulated by Silica Nanorattles

An efficient and facile method to synthesise silica nanorattles with multiple noble metal (Au and Pd) cores by a simultaneous etching and growth route has been developed. In this strategy, a dual‐functional alkylaminosilane was adopted to form the middle layer of solid organic–inorganic hybrid solid‐silica spheres (HSSSs), which enabled the selective etching of the middle hybrid layer of the HSSSs and the in situ growth of metal nanoparticles (NPs) inside the cavity in a one‐step hydrothermal reaction. By adjusting the pH values of the reaction system, the metal NPs could be grown exclusively inside the silica nanorattles, resulting in a high atomic utilisation of the noble metals. The size and number of Au cores were tunable by manipulating the initial concentration of HAuCl₄. The prepared silica nanorattles with Au cores were successfully applied to the catalytic reduction of 4‐nitrophenol and showed high catalytic activity and cycle stability. Catalysts with multiple gold cores exhibited superior catalytic activity to those with a single gold core, probably because they possess smaller Au cores with greater surface area.     

Constructing magnetic polyaniline/metal hybrid nanostructures using polyaniline/Fe3O4 composite hollow spheres as supports

Polyaniline (PANI)/Fe₃O₄ composite hollow spheres have been successfully synthesized in one step using sulfonated polystyrene (PS) spheres as templates. The magnetic PANI hollow spheres were used as supports for noble metal nanoparticles (NPs) such as Au and Pd. The morphology, composition and magnetic properties of the resulting products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, inductively coupled plasma (ICP) atomic spectra and vibrating sample magnetometer. The catalytic activity of magnetic PANI/Au composite shells on the oxidation of dopamine was investigated by cyclic voltammetry. The obtained results provide our product with a practical application for the detection of dopamine. On the other hand, the catalytic activity of magnetic PANI/Pd composite shells on the reduction of 4-nitroaniline was investigated by spectroscopic methods and compared with Pd/C catalyst which was already widely used in industrial production.     

聚苯乙烯/银纳米粒子复合微球的合成及催化性能

首先通过乳液聚合和浓硫酸酸化制备表面富含磺酸根的磺化聚苯乙烯(PS)微球(直径532 nm),再用其静电吸附[Ag(NH_3)_2]~+离子,最后采用聚乙烯吡咯烷酮还原表面吸附的[Ag(NH_3)_2]~+离子,得到了负载银纳米粒子的PS/AgNPs复合微球.采用扫描电子显微镜、透射电子显微镜、紫外-可见光谱、红外光谱和X射线衍射表征了PS/AgNPs复合微球,并考察了其对甲基蓝(MB)的催化性能.结果表明,Ag纳米粒子高度分散在磺化PS微球表面;该PS/AgNPs复合微球对催化转化MB有较高的催化活性,并可多次重复利用.本研究在催化降解有机污染物方面有一定的实用价值.     

Ternary Ag/Polyaniline/Au nanocomposites: Preparation,characterization and electrochemical properties

Ternary Ag/Polyaniline/Au nanocomposites were synthesized successfully by immobilizing of Au nanoparticles (NPs) on the surface of Ag/Polyaniline (PANI) nanocomposites. Ag/PANI nanocomposites were prepared via in situ chemical polymerization of aniline in the presence of 4-aminothiophenol (4-ATP) capped silver colloidal NPs. Then, uniform gold (Au) NPs were assembled on the surface of resulted Ag/PANI nanocomposites through electrostatic interaction to get Ag/Polyaniline/Au nanocomposites. The nanocomposites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), ultraviolet visible spectroscopy (UV-Vis), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR). Moreover, Ag/PANI/Au nanocomposites were immobilized on the surface of a glassy carbon electrode and showed enhanced electrocatalytic activity for the reduction of H₂O₂ compared with Ag/PANI.     

Bimetallic Au–Ni Nanoparticles Embedded in SiO2 Nanospheres: Synergetic Catalysis in Hydrolytic Dehydrogenation of Ammonia Borane

Gold–nickel nanoparticles (NPs) of 3–4 nm diameter embedded in silica nanospheres of around 15 nm have been prepared by using [Au(en)₂Cl₃] and [Ni(NH₃)₆Cl₂] as precursors in a NP‐5/cyclohexane reversed‐micelle system, and by in situ reduction in an aqueous solution of NaBH₄/NH₃BH₃. Compared with monometallic Au@SiO₂ and Ni@SiO₂, the as‐synthesized Au–Ni@SiO₂ catalyst shows higher catalytic activity and better durability in the hydrolysis of ammonia borane, generating a nearly stoichiometric amount of hydrogen. During the generation of H₂, the synergy effect between gold and nickel is apparent: The nickel species stabilizes the gold NPs and the existence of gold helps to improve the catalytic activity and durability of the nickel NPs.     

Selective growth of Au nanoparticles on (111) facets of Cu2O microcrystals with an enhanced electrocatalytic property

The selective growth of Au nanoparticles on (111) facets of truncated octahedral and cuboctahedral Cu(2)O crystals has been achieved by exploiting the differences in the standard potential between AuCl(4)(-)/Au and Cu(2+)/Cu(2)O pairs and in surface energies between (111) and (100) planes. The density and size of Au nanoparticles can be controlled by tuning the concentration of the gold precursor. Truncated octahedral Cu(2)O-Au nanocomposites have a 10 times higher electrochemically catalytic activity toward H(2)O(2) reduction than do pure Cu(2)O crystals. The enhanced catalysis may be derived from the polarization of Au NPs at the interface, which makes Cu(2)O more active for H(2)O(2) reduction.     

Extending Surface-Enhanced Raman Spectroscopy to Liquids Using Shell-Isolated Plasmonic Superstructures

Plasmonic superstructures (PS) based on Au/SiO₂ were prepared for Shell-Isolated Nanoparticle-Enhanced Raman Spectroscopy (SHINERS) in liquid phase applications. These superstructures are composed of functionalized SiO₂ spheres with plasmonic Au nanoparticles (NPs) on their surface. Functionalization was performed with (3-aminopropyl)trimethoxysilane, (3-mercaptopropyl)trimethoxysilane and poly(ethylene-imine) (PEI). Of these three, PEI-functionalized spheres showed the highest adsorption density of Au NPs in TEM, UV/Vis and dynamic light scattering (DLS) experiments. Upon decreasing the Au NP/SiO₂ sphere size ratio, an increase in adsorption density was also observed. To optimize plasmonic activity, 61 nm Au NPs were adsorbed onto 900 nm SiO₂-PEI spheres and these PS were coated with an ultrathin layer (1–2 nm) of SiO₂ to obtain Shell-Isolated Plasmonic Superstructures (SHIPS), preventing direct contact between Au NPs and the liquid medium. Zeta potential measurements, TEM and SHINERS showed that SiO₂ coating was successful. The detection limit for SHINERS using SHIPS and a 638 nm laser was around 10⁻¹² m of Rhodamine (10⁻¹⁵ m for uncoated PS), all with acquisition settings suitable for catalysis applications.     

Preparation of Au/TiO2 nanocomposites and their catalytic activity for DPPH radical scavenging reaction

Au/TiO2 nanocomposites have been prepared by UV photolysis or chemical reduction of a Au(III) complex formed on a spherical or a rodlike TiO2 support, and their catalytic activity for 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging reaction was investigated. The chemical reduction with dimethylamine borane (DMAB) provided smaller gold nanoparticles than those synthesized by UV photolysis. Type of the TiO2 also affected the size of gold particles; smaller gold particles were deposited on the spherical TiO2 support than on rodlike one. For the radical scavenging reaction, the Au/TiO2 nanocomposites prepared by chemical reduction exhibited a higher catalytic activity than those photochemically prepared, and rodlike TiO2 provided a higher activity than spherical one. The effects of preparation methods and type of TiO2 supports on the catalytic activity are discussed.     

Preparation of sulfate- and carboxyl-functionalized magnetite/polystyrene spheres for further deposition of gold nanoparticles

A synthetic method developed for preparation of sulfate- and carboxyl-functionalized magnetite/polystyrene (Fe₃O₄/PS) spheres that can be further decorated with gold (Au) nanoparticles is reported. By using emulsifier-free emulsion polymerization based on potassium persulfate (KPS)/methyl acrylic acid (MAA)/water system in the presence of Fe₃O₄/PS spheres used as the seeds, PMAA-coated magnetic Fe₃O₄-PS spheres were readily obtained. The sulfate group is inherent in KPS for initiating the polymerization of PMAA, and eventually it acts as the reducing agent for the deposition of Au nanoparticles. The carboxyl group, on the other hand, could seemingly contribute to immobilize Au nanoparticles precipitated. The morphologies, magnetic properties, and characteristics of oleate-stabilized Fe₃O₄ nanoparticles, Fe₃O₄/PS spheres, PMAA-coated Fe₃O₄/PS spheres, and Au-decorated resultant spheres were respectively studied using transmission electron microscopy, X-ray diffraction, Fourier transform infrared, and superconducting quantum interference device magnetometer.     

Electrochemical Properties of a Boron‐Doped Diamond Electrode Modified with Gold/Polyelectrolyte Hollow Spheres

Oppositely charged polyelectrolyte (poly(allyamine hydrochloride) (PAH) and poly(sodium 4‐styrene‐sulfonate) (PSS)), and negatively charged gold nanoparticles (Au) were assembled alternately on polystyrene (PS) spheres via layer‐by‐layer technique, and the different PAH/(PSS/PAH)_n/(Au/PAH)_m/Au composite hollow spheres were derived by dissolving PS core. These hollow spheres were used to modify boron‐doped diamond (BDD) electrodes for electrochemical sensors. The cyclic voltammetric results for dopamine (DA) detection demonstrated that hollow‐sphere‐modified BDD exhibited better electrocatalytic activity than did bare BDD. Influence of the wall thickness and composition of hollow spheres on electrochemical properties were investigated. The results showed that the oxidative peak potential of DA and the peak current varied with different PSS/PAH and Au/PAH layers. The optimized wall structure of hollows spheres was PAH/(PSS/PAH)₇/(Au/PAH)₅/Au.     

Green preparation of hollow mesoporous silica nanosphere inside-loaded gold nanoparticles and the catalytic activity

In this work, an active nano-catalyst with gold nanoparticles loaded in hollow mesoporous silica nanospheres (HMSNs/Au) was prepared by a one-pot sol-gel method, in which gold ions were loaded in hollow mesoporous silica spheres followed by sodium alginate reduction. The characterization of the HMSNs/Au were determined by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), N₂ adsorption–desorption isotherms (BET). The high catalytic activity of HMSNs/Au, denoted as apparent turn-over frequency (TOF), was detected by UV-Vis spectrophotometer for the catalytic reduction of 4-nitrophenol (74.5 h^?1) and 2-nitrophenol (108.7 h^?1) in the presence of sodium borohydride solution due to the small gold nanoparticles size and overall exposure of active sites. It is expected that this ecofriendly approach to prepare inorganic composited nanoparticles as high active catalysts based on hollow mesoporous materials was a promising platform for loading noble metal nanoparticles.     

Water‐Soluble Gold Nanoparticles: From Catalytic Selective Nitroarene Reduction in Water to Refractive Index Sensing

Water‐soluble gold nanoparticles (Au NPs) stabilized by a nitrogen‐rich poly(ethylene glycol) (PEG)‐tagged substrate have been prepared by reduction of HAuCl₄ with NaBH₄ in water at room temperature. The morphology and size of the nanoparticles can be controlled by simply varying the gold/stabilizer ratio. The nanoparticles have been fully characterized by TEM, high‐resolution (HR) TEM, electron diffraction (ED), energy‐dispersive X‐ray spectroscopy (EDS), UV/Vis, powder XRD, and elemental analysis. The material is efficient as a recyclable catalyst for the selective reduction of nitroarenes with NaBH₄ to yield the corresponding anilines in water at room temperature. Furthermore, the potential ability of the Au NPs as a refractive index sensor owing to their localized surface plasmon resonance (LSPR) effect has also been assessed.     

A General Route to Construct Diverse Multifunctional Fe3O4/Metal Hybrid Nanostructures

Multifunctional nanostructures : By using 3‐aminopropyltrimethoxysilane as a linker, Au nanoparticles (NPs), Au shells, flowerlike Au/Pt hybrid NPs, and Ag or Au/Ag core/shell NPs could be supported on the surface of superparamagnetic Fe₃O₄ spheres to construct hybrid nanostructures that display near‐IR absorption, high catalytic activity towards an electron‐transfer reaction, or excellent surface‐enhanced Raman scattering activity. The picture shows SEM images of Fe₃O₄ spheres coated with Au shells (top) and with Au/Pt hybrid NPs (bottom).

     

Robust Synthesis of Gold‐Based Multishell Structures as Plasmonic Catalysts for Selective Hydrogenation of 4‐Nitrostyrene

A robust self‐template strategy is used for facile and large‐scale synthesis of porous multishell gold with controllable shell number, sphere size, and in situ surface modification. The process involved the rapid reduction of novel Au‐melamine colloidal templates with a great amount of NaBH₄ in presence of poly(sodium‐p‐styrenesulfonate) (PSS). After soaking the templates in other metal salt solution, the obtained bimetallic templates could also be generally converted into bimetallic multishell structures by same reduction process. In the hydrogenation of 4‐nitrostyrene using NH₃BH₃ as a reducing agent, the porous triple‐shell Au with surface modification (S‐PTSAu) exhibited excellent selectivity (97 %) for 4‐aminostyrene in contrast with unmodified triple‐shell Au. Furthermore, it also showed higher enhancement of catalytic activity under irradiation of visible light as compared to similar catalysts with fewer shells.     

Robust Synthesis of Gold-Based Multishell Structures as Plasmonic Catalysts for Selective Hydrogenation of 4-Nitrostyrene

A robust self-template strategy is used for facile and large-scale synthesis of porous multishell gold with controllable shell number, sphere size, and in situ surface modification. The process involved the rapid reduction of novel Au-melamine colloidal templates with a great amount of NaBH₄ in presence of poly(sodium-p-styrenesulfonate) (PSS). After soaking the templates in other metal salt solution, the obtained bimetallic templates could also be generally converted into bimetallic multishell structures by same reduction process. In the hydrogenation of 4-nitrostyrene using NH₃BH₃ as a reducing agent, the porous triple-shell Au with surface modification (S-PTSAu) exhibited excellent selectivity (97 %) for 4-aminostyrene in contrast with unmodified triple-shell Au. Furthermore, it also showed higher enhancement of catalytic activity under irradiation of visible light as compared to similar catalysts with fewer shells.     

金纳米颗粒在不同包裹介质中的超快等离子体动力学

Herein, we prepared four samples, namely gold/poly(sodium-p-styrenesulfonate) (Au/PSS), gold/silicon dioxide (Au/SiO₂), gold/titanium dioxide (Au/TiO₂), and gold/cuprous oxide (Au/Cu₂O) core/shell nanocomposites, to investigate how the surrounding medium affects the ultrafast plasmon dynamics of Au nanoparticles (NPs). We recorded femtosecond transient absorption spectra of Au NPs in Au/PSS, Au/SiO₂, Au/TiO₂, and Au/Cu₂O core/shell nanocomposites at various time delays. We found that the spectral features in the femtosecond transient absorption spectra of Au NPs in Au/TiO₂ and Au/Cu₂O core/shell nanocomposites were dramatically different from those of Au NPs in Au/PSS and Au/SiO₂ core/shell nanocomposites. A comprehensive analysis of the ultrafast plasmon dynamics of Au NPs in the core/shell nanocomposites revealed that following excitation of the resonance plasmon band of Au NPs, the exited electrons could be efficiently transferred into the conduction bands of TiO₂ and Cu₂O in Au/TiO₂ and Au/Cu₂O core/shell nanocomposites.     

Growth mechanism of gold nanoparticles decorated on polystyrene spheres via self-regulated reduction

Uniform polystyrene (PS) microspheres prepared for deposition of metallic nanoparticles were synthesized using the surfactant-free emulsion polymerization based on styrene/potassium persulfate/water (St/KPS/H₂O) system. Owing to the presence of sulfate groups, the PS microspheres can be utilized to reduce gold nanoparticles without adding extra reducing agent into the mixture. The synthesis and characterization of metal-polystyrene nanocomposites are reported, and a possible reduction mechanism is proposed: by heating the aqueous solution in the presence of metal ions and PS, the sulfate chain end groups of the PS hydrolyzed and transformed to hydroxyl groups firstly. The hydroxyl groups function as a reducing agent, and carboxylic groups provide a site to adsorb the gold nuclei. The Au nanoparticles grow in size with the coalescence and dissolving of nuclei through the Ostwald ripening process. The PS microspheres and Au nanoparticles were characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, X-ray power diffraction, and thermal gravimetric analysis.