Effects of inherent/enhanced solid acidity and morphology of diatomite templates on the synthesis and porosity of hierarchically porous carbon

The inherent or enhanced solid acidity of raw or activated diatomite is found to have significant effects on the synthesis of hierarchically porous diatomite-templated carbon with high surface area and special porous structure. The solid acidity makes raw/activated diatomite a catalyst for the generation of porous carbon, and the porous parameters of the carbon products are strongly dependent on the solid acidity of diatomite templates. The morphology of diatomite also dramatically affects the textural structure of porous carbon. Two types of macroporous structures in the carbon product, the partially solid pillars and the ordered hollow tubes, derive from the replication of the central and the edge pores of diatom shell, respectively. The hierarchically porous carbon shows good capability for the adsorption of solvent naphtha and H(2), enabling potential applications in adsorption and gas storage.     

Enhanced hydrogen storage capacity of high surface area zeolite-like carbon materials

We report the synthesis of zeolite-like carbon materials that exhibit well-resolved powder XRD patterns and very high surface area. The zeolite-like carbons are prepared via chemical vapor deposition (CVD) at 800 or 850 degrees C using zeolite beta as solid template and acetonitrile as carbon precursor. The zeolite-like structural ordering of the carbon materials is indicated by powder XRD patterns with at least two well-resolved diffraction peaks and TEM images that reveal well-ordered micropore channels. The carbons possess surface area of up to 3200 m2/g and pore volume of up to 2.41 cm3/g. A significant proportion of the porosity in the carbons (up to 76% and 56% for surface area and pore volume, respectively) is from micropores. Both TEM and nitrogen sorption data indicate that porosity is dominated by pores of size 0.6-0.8 nm. The carbon materials exhibit enhanced (and reversible) hydrogen storage capacity, with measured uptake of up to 6.9 wt % and estimated maximum of 8.33 wt % at -196 degrees C and 20 bar. At 1 bar, hydrogen uptake capacity as high as 2.6 wt % is achieved. Isosteric heat of adsorption of 8.2 kJ/mol indicates a favorable interaction between hydrogen and the surface of the carbons. The hydrogen uptake capacity observed for the zeolite-like carbon materials is among the highest ever reported for carbon (activated carbon, mesoporous carbon, CNTs) or any other (MOFs, zeolites) porous material.     

Simple fabrication of a phosphorus-doped hierarchical porous carbon via soft-template method for efficient CO2capture

Hierarchical porous carbons are widely used as adsorbents, catalyst supports, electrode materials, and other applications because of their high specific surface area (SSA), varied pore structure, adjustable porosity, and excellent physicochemical stability. Introducing heteroatoms such as N, P, or S, with electronegativities different from that of carbon, into the carbon skeleton can change the chemical properties of the surface and the density of the electron cloud around the carbon matrix, thus altering interactions of CO₂molecules with the surface and improving CO₂adsorption capacity. Therefore, doping heteroatoms in carbon materials has attracted a great amount of attention. In this paper, the template method was used with F108 (polyethylene glycol–polypropylene glycolpolyethylene glycol) as the template, resorcinol and formaldehyde solutions as the carbon sources, phosphoric acid as the phosphorus source, and KOH as the activator to prepare phosphorus-doped hierarchical porous carbons. Through a series of characterization and CO₂adsorption experiments, the influence of the amount of KOH and template agent on the pore structure of carbon materials was studied. We conclude that these phosphorus-doped hierarchical porous carbon materials are promising CO₂adsorbents.     

Control of Porosity by Using Isoreticular Zeolitic Imidazolate Frameworks (IRZIFs) as a Template for Porous Carbon Synthesis

Herein, by using isoreticular zeolitic imidazolate frameworks (IRZIFs) as a template, we report the synthesis, morphology, and gas adsorption properties of porous carbon synthesized by a nanocasting method at 1000?°C, in which furfuryl alcohol (FA) was used as a carbon source. By using IRZIFs with variable porosity as templates, we could achieve control over the carbon porosity and H(2) and CO(2) uptake. The resultant microporous carbon C-70, synthesized by using ZIF-70 as the template, is the most porous (Brunauer-Emmett-Teller (BET) surface area 1510?m(2) g(-1) ). Carbon C-68, synthesized by using ZIF-68, has moderate porosity (BET surface area 1311?m(2) g(-1) ), and C-69, synthesized by using ZIF-69, has the lowest porosity in this series (BET surface area 1171?m(2) g(-1) ). The porous carbons C-70, C-68, and C-69, which have graphitic texture, have promising H(2) uptake capacities of 2.37, 2.15, and 1.96?wt?%, respectively, at 77?K and 1?atm. Additionally, C-70, C-68, and C-69 show CO(2) uptake capacities of 5.45, 4.98, and 4.54?mmol?g(-1) , respectively, at 273?K and 1?atm. The gas uptake trends shown by C-70, C-68, and C-69 clearly indicate the dependence of carbon porosity on the host template. Moreover, the as-synthesized carbons C-70, C-68, and C-69 show variable conductivity.     

蟹壳基氮/氧共掺杂多孔炭的原位制备及其超级电容器性能

采用废弃蟹壳为碳源,KOH为活化剂原位制备了氮/氧共掺杂多孔炭,并研究其作为电极材料在超级电容器中的应用。 固定蟹壳与KOH的质量比为5:3,考察了煅烧温度对所得炭材料产率、孔结构和氮氧含量的影响。 结果表明,蟹壳基炭材料的孔结构和氮/氧含量可通过改变煅烧温度调变。 随着煅烧温度从500 ℃上升至700 ℃,多孔炭的比表面积和孔体积逐渐增大,而氮/氧含量随温度升高则降低。 采用循环伏安和恒流充放电对所得材料的电化学性能进行测试。 结果表明,所得多孔炭的电化学性能取决于其孔结构与氮/氧表面性质的协同作用,其中煅烧温度为600 ℃所得的多孔炭比表面积为612 m²/g,氮和氧含量分别为3.53%和32.8%,在50 mA/g的电流密度下比电容达到310 F/g,循环1000次比电容仍然保持95%以上,展现出良好的电化学性能。     

Porous carbon powders prepared by ultrasonic spray pyrolysis

New, thermally robust meso- and macroporous carbon powders were prepared by ultrasonic spray pyrolysis (USP) of aqueous solutions using an inexpensive high-frequency ultrasound generator from a household humidifier. We choose our molecular precursors rationally, so that the expected decomposition pathways produce only remnant carbon atoms. Specifically, our rational design criterion led to halo-organic carboxylate salts, whose pyrolysis yields well-defined carbon solids with a temporary template being generated in situ, simply an inorganic salt, which is easily dissolved during aqueous workup. The materials have been characterized by SEM, TEM, XRD, 13C NMR MAS, XPS, FTIR spectroscopy, and BET surface area measurements. Changing the alkali metal alters the morphology and pore structure of the final material, which can be explained in terms of the observed differences in the DSC and TGA of the various precursors. This preparatory method provides an extremely facile and versatile method for the generation of meso- and macroporous carbons.     

Hierarchical Porous ZSM‐5 Zeolite Synthesized by in situ Zeolitization and Its Coke Deposition Resistance in Aromatization Reaction

Hierarchical ZSM‐5 zeolites with micro‐, meso‐ and macroporosity were prepared from diatomite zeolitization through a vapor‐phase transport process on solid surfaces. The aromatization performance of the catalysts was investigated on a fixed bed reactor by using FCC gasoline as feedstock. The crystal phase, morphology, pore structures, acidity and coke depositions of the hierarchical ZSM‐5 zeolites were characterized by means of X‐ray diffraction (XRD), scanning electron microscope (SEM), N₂ adsorption/desorption, Fourier transform infrared (FT‐IR) and thermogravimetry‐mass spectrogram (TG‐MS), respectively. The results show that the prepared hierarchical ZSM‐5 zeolite possesses excellent porosity and high crystallinity, displaying an improved aromatization performance and carbon deposition resistance due to its meso‐ and macroporous structures.     

Direct carbonization of Al-based porous coordination polymer for synthesis of nanoporous carbon

Nanoporous carbon (NPC) is prepared by direct carbonization of Al-based porous coordination polymers (Al-PCP). By applying the appropriate carbonization temperature, both high surface area and large pore volume are realized for the first time. Our NPC shows much higher porosity than other carbon materials (such as activated carbons and mesoporous carbons). This new type of carbon material exhibits superior sensing capabilities toward toxic aromatic substances.     

Hierarchical porous carbon derived from rice straw for lithium ion batteries with high-rate performance

Porous carbons with a high surface area have been prepared from rice straw. The hierarchical porous network with large macroporous channels and micropores within the channel walls enable the porous carbons to provide the pathways for easy accessibility of electrolytes and fast transportation of lithium ions. These porous carbons which show a particular large reversible capacity are proved to be promising anode materials for high-rate and high-capacity lithium ion batteries.     

Preparation and hydrogen storage properties of zeolite-templated carbon materials nanocast via chemical vapor deposition: effect of the zeolite template and nitrogen doping

Carbon materials have been prepared using zeolite 13X or zeolite Y as template and acetonitrile or ethylene as carbon source via chemical vapor deposition (CVD) at 550-1000 degrees C. Materials obtained from acetonitrile at 750-850 degrees C (zeolite 13X) or 750-900 degrees C (zeolite Y) have high surface area (1170-1920 m(2)/g), high pore volume (0.75-1.4 cm(3) g(-1)), and exhibit some structural ordering replicated from the zeolite templates. Templating with zeolite Y generally results in materials with higher surface area. High CVD temperature (> or =900 degrees C) results in low surface area materials that have significant proportions of graphitic carbon and no zeolite-type structural ordering. The nitrogen content of the samples derived from acetonitrile varies between 5 and 8 wt %. When ethylene is used as a carbon precursor, high surface area (800-1300 m(2)/g) materials are only obtained at lower CVD temperature (550-750 degrees C). The ethylene-derived carbons retain some zeolite-type pore channel ordering but also exhibit significant levels of graphitization even at low CVD temperature. In general, the carbon materials retain the particle morphology of the zeolite templates, with solid-core particles obtained at 750-850 degrees C while hollow shells are generated at higher CVD temperature (> or =900 degrees C). We observed hydrogen uptake of up to 4.5 wt % and 45 g H(2)/L (volumetric density) at -196 degrees C and 20 bar for the carbon materials. The hydrogen uptake was found to be dependent on surface area and was therefore influenced by the choice of zeolite template and carbon source. Zeolite Y-templated N-doped carbons had the highest hydrogen uptake capacity. Gravimetric and volumetric methods gave similar uptake capacity at 1 bar (i.e., 1.6 and 2.0 wt % for zeolite 13X and Y-templated N-doped carbons, respectively). Our findings show that zeolite-templated carbons are attractive for hydrogen storage and highlight the potential benefits of functionalization (nitrogen-doping).     

Influence of MgO template on carbon dioxide adsorption of cation exchange resin-based nanoporous carbon

In this work, porous carbons with well-developed pore structures were directly prepared from a weak acid cation exchange resin (CER) by the carbonization of a mixture with Mg acetate in different ratios. The effect of the Mg acetate-to-CER ratio on the pore structure and CO(2) adsorption capacities of the obtained porous carbons was studied. The textural properties and morphologies of the porous carbons were analyzed via N(2)/77K adsorption/desorption isotherms, SEM, and TEM, respectively. The CO(2) adsorption capacities of the prepared porous carbons were measured at 298 K and 1 bar and 30 bar. By dissolving the MgO template, the porous carbons exhibited high specific surface areas (326-1276 m(2)/g) and high pore volumes (0.258-0.687 cm(3)/g). The CO(2) adsorption capacities of the porous carbons were enhanced to 164.4 mg/g at 1 bar and 1045 mg/g at 30 bar by increasing the Mg acetate-to-CER ratio. This result indicates that CER was one of the carbon precursors to producing the porous structure, as well as for improving the CO(2) adsorption capacities of the carbon species.     

Synthesis of porous carbon balls from spherical colloidal crystal templates

Spherical inverse opal (IO) porous carbon was produced utilizing silica colloidal crystal spheres as templates. The spherical colloidal crystals were obtained through the self-assembly of monodisperse particles inside an emulsion droplet with confined geometry. The templates were inverted using a carbon precursor, phenol-formaldehyde (PF) resol. We demonstrated a two-step synthesis involving the subsequent infiltration of the PF resol precursor into the spherical colloidal crystal template and a one-step synthesis using a silica colloidal solution containing dissolved PF resol. In the former case, the sizes of the IO carbon balls were controlled by the size of the colloidal crystal templates, and diameters of a few micrometers up to 50 μm were obtained. The average diameter of the macropores created by the silica particles was 230 nm. Moreover, meso-/macroporous IO carbon balls were created using block-copolymer templates in the PF resol. In the one-step synthesis, the concentration of PF resol in the colloidal solution controlled the diameter of the IO carbon balls. IO balls smaller than 3 μm were obtained from the direct addition of 5% PF resol. The one-step synthesis produced rather irregular porous structures reflecting the less ordered crystallization processes inside the spherical colloidal crystals. Nitrogen adsorption and cyclic voltammetry measurements were conducted to measure the specific area and electroactive surface area of the IO carbon balls. The specific area of the mesopores-incorporated IO carbon balls was 1.3 times higher than that of bare IO carbon balls. Accordingly, the meso-/macroporous porous carbon balls exhibited higher electrocatalytic properties than the macroporous carbon balls.     

Adsorption of carbon dioxide-methane mixtures in porous carbons: effect of surface chemistry

A combined experimental and molecular simulation study of the coadsorption of CO₂ and CH₄ in porous carbons is reported. We address the effect of surface chemistry by considering a numerical model of disordered porous carbons which has been modified to include heterochemistry (with a chemical composition consistent with that of the experimental sample). We discuss how realistic the numerical sample is by comparing its pore size distribution (PSD), specific surface area, porous volume, and porosity with those for the experimental sample. We also discuss the different criteria used to estimate the latter properties from a geometrical analysis. We demonstrate the ability of the MP method to estimate PSD of porous carbons from nitrogen adsorption isotherms. Both the experimental and simulated coadsorption isotherms resemble those obtained for pure gases (type I in the IUPAC classification). On the other hand, only the porous carbon including the heterogroups allows simulating quantitatively the selectivity of the experimental adsorbent for different carbon dioxide/methane mixtures. This result shows that taking into account the heterochemistry present in porous carbons is crucial to represent correctly adsorption selectivities in such hydrophobic samples. We also show that the adsorbed solution theory describes quantitatively the simulated and experimental coadsorption isotherms without any parameter adjustment.     

Fabrication of ordered uniform porous carbon networks and their application to a catalyst supporter

Ordered uniform porous carbon frameworks showing interesting morphology variations were synthesized against removable colloidal silica crystalline templates through simply altering acid catalyst sites for acid-catalyzed polymerization. These highly ordered uniform porous carbons as a catalyst supporter resulted in much improved catalytic activity for methanol oxidation in a fuel cell.     

Preparation and characterization of templated porous carbons from sucrose by one-pot method and application as a CO2 adsorbent

The templated porous carbons were prepared from sucrose by one-pot method. In this method in which the pre-synthesis of the hard template is eliminated, the porous carbons were produced by organic-inorganic self-assembly of sucrose, tetraethyl ortosilicate (TEOS), Pluronic P123 and n-butanol in an acidic medium, and subsequent carbonization. The synthesis parameters such as sucrose amount, TEOS molar ratio and carbonization temperature were evaluated for describing their effects on the pore structures of the synthesized carbons. The prepared porous carbons were characterized by N₂ adsorption, thermogravimetric analysis (TGA), Raman spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM) techniques. The carbon dioxide adsorption uptakes of the obtained porous carbons were determined at 1 bar and 273 K. The templated carbon obtained with the lowest TEOS molar ratio exhibited the highest BET surface area of 1289 m²/g and micropore volume of 0.467 cm³/g, and showed the highest CO₂ uptake of 2.28 mmol/g.     

由微孔棒状羟基磷灰石为模板合成的新型层次孔炭材料的电化学电容性能

电化学电容器已经成为极具潜力的可满足高功率需求的储能系统器件. 多孔炭具有大比表面积、高导电性、化学惰性、廉价及可调孔结构等优势, 因此成为电化学电容器最为常用的电极材料. 本文报道由微孔棒状羟基磷灰石为模板及蔗糖为碳源合成的新型具有层次孔道结构的孔炭材料的电化学电容器的性能. 采用X射线衍射分析仪、扫描电子显微镜、透射电子显微镜、X射线光电子能谱及BET表面分析仪表征了合成的多孔炭的形貌及表面特性. 采用循环伏安法、交流阻抗图谱分析及恒流充放电评价多孔炭材料在1 mol·L^-1硫酸中的电化学电容性能. 多孔炭具有高的比表面积(719.7 m²·g^-1)和大的孔容(1.32 cm³·g^-1), 其无序的孔道由任意分布的微孔、坍塌的中孔及类模板形状的相互交织的棒状中孔组成. 随着炭化温度的增加, 微孔及棒状中孔的密度随之降低, 在炭化温度高达900℃时, 孔径分布图上出现了三个峰. 正是由于这些特殊的结构特征, 由900℃炭化得到的多孔炭制成的电极展示出很好的电化学电容性能.     

Erythrocyte-like hollow carbon capsules and their application in proton exchange membrane fuel cells

Hierarchical nanostructured erythrocyte-like hollow carbon (EHC) with a hollow hemispherical macroporous core of ca. 230 nm in diameter and 30-40 nm thick mesoporous shell was synthesized and explored as a cathode catalyst support in a proton exchange membrane fuel cell (PEMFC). The morphology control of EHC was successfully achieved using solid core/mesoporous shell (SCMS) silica template and different styrene/furfuryl alcohol mixture compositions by a nanocasting method. The EHC-supported Pt (20 wt%) cathodes prepared have demonstrated markedly enhanced catalytic activity towards oxygen reduction reactions (ORRs) and greatly improved PEMFC polarization performance compared to carbon black Vulcan XC-72 (VC)-supported ones, probably due to the superb structural characteristics of the EHC such as uniform size, well-developed porosity, large specific surface area and pore volume. In particular, Pt/EHC cathodes exhibited ca. 30-60% higher ORR activity than a commercial Johnson Matthey Pt catalyst at a low catalyst loading of 0.2 mg Pt cm(-2).     

壳聚糖基多孔碳材料的制备及其超级电容性能

以胶态SiO₂纳米粒子为模板,壳聚糖为碳源,ZnCl₂为活化剂,制备了具有不同比表面积和孔体积的氮掺杂介孔碳。采用多种表征手段对碳材料的微观形貌、比表面积和孔道结构进行了表征,探究了壳聚糖与SiO₂纳米粒子的比例以及ZnCl₂活化剂对碳材料孔体积和比表面积的影响。结果表明,在未使用活化剂时碳材料(CSi-1.75)的孔体积高达4.53 cm³·g^-1,但其比表面积最小(729 m²·g^-1);使用ZnCl₂作为活化剂制备的碳材料(CSi-1.75-Zn)比表面积为1 032 m²·g^-1,但其孔体积下降到1.99 cm³·g^-1,且具有最多的吡啶氮和吡咯氮。在以6.0 mol·L^-1KOH为电解液的三电极体系中,当电流密度为0.5 A·g^-1时,CSi-1.75...     

多组分聚氨酯大孔吸附树脂的结构及形态结构

经缩聚和加聚反应分步聚合制得聚氨酯大孔吸附树脂,通过红外光谱分析等手段证实大孔树脂的骨架结构与原设计一致,在于态下测得的比表面积为120m²/g,且性能稳定、孔径分布窄、机械强度高。利用DSC、SAXS对其骨架结构进行研究的结果表明:聚氨酯大孔树脂具有微相分离的形态结构,且存在两种分散相。     

Adsorption of the Cu<Superscript>2+</Superscript> ions from aqueous solutions on the active carbon oxidized with hydrogen peroxide and impregnated with nitrogen-containing compounds

Adsorption of the copper ions from aqueous solutions, benzene, and water on the active carbon obtained by chemical activation from walnut shells was studied. The active carbon was additionally oxidized with hydrogen peroxide and then impregnated with nitrogen-containing compounds. As a result of impregnation with melamine, a secondary porosity is formed within the oxidized active carbon, leading to an increase in the specific surface of the sorbent. A modified carbon surface is heterogeneous, and the carbons themselves exhibit catalytic activity in the oxidation of luminol and decomposition of hydrogen peroxide.