IR and Raman investigation on the structure of (100-x)B2O3-x[0.5 BaO-0.5 ZnO] glasses

Glasses with molar composition of (100-x)B₂O₃-x[0.5 BaO-0.5 ZnO], x=40, 50, 60, 70 were prepared from the melts of ZnO, BaCO₃ and H₃BO₃ mixture. The structure and thermal behavior were characterized by IR and Raman spectroscopy, DSC and Dilatometer. The investigation shows that the transition of the structural unit [BO₄] (B^IV) to [BO₃] (B^III) happens when BaO and ZnO content x increases in the borate glass, resulting in fewer B^III-O-B^IV bonds and more B^III-O-B^III bonds. At the same time, the diborate groups, which are found to be the predominant structural group of the glass with high B₂O₃ content, gradually changes into ring-type metaborate, pyro- and orthoborate groups. With increasing ZnO and BaO content x, the glass transition temperature (T_g) and the softening point (T_f) decreases, while linear expansion coefficient (α) increases, that comes from the weakening of the glass network.     

Conversion of covalent to ionic character of V2O5–CeO2–PbO–B2O3 glasses for solid state ionic devices

xV₂O₅–xCeO₂–(30−x)PbO–(70−x) B₂O₃ glasses are synthesized by using the melt quench technique. The number of studies such as XRD, density, molar volume, optical band gap, refractive index and FTIR spectroscopy are employed to characterize the glasses. The band gap decreases from 2.20 to 1.78 eV and density increases from 3.49 to 4.25 g/cm³. FTIR spectroscopy reveals that incorporation of V₂O₅ in glass network helps to convert the structural units of [BO₃] into [BO₄]. At higher concentration of vanadium, VO vibration of [VO₅] structural units and V–O–V vibration are present. The bond ionicity of glasses increases with incorporation of V₂O₅ contents.     

Spectroscopic study of ZnO doped CeO2-PbO-B2O3 glasses

Glass samples of compositions xZnO-xCeO₂-(30−x)PbO-(70−x)B₂O₃ with x varying from 2% to 10% mole fraction are prepared by the melt quench technique. The structural and optical analysis of glasses is carried out by XRD, FTIR, density and UV-visible spectroscopic measurement techniques. The FTIR spectral analysis indicates that with the addition of ZnO contents in glass network, structural units of BO₃ are transformed into BO₄. It has been observed in our previous work that band gap decreases from 2.89 to 2.30 eV for CeO₂-PbO-B₂O₃ glasses with cerium content varying from 0% to 10% [Gurinder Pal Singh, Davinder Paul Singh, Physica B 406(3) (2011) 640-644]. With the incorporation of zinc in CeO₂-PbO-B₂O₃ glasses, the optical band gap energy decreases further from 2.38 to 2.03 eV. This causes more compaction of the borate network, which results in an increase of density (3.39-4.02 g/cm³). Transmittance shows that ZnO in glass samples acts as a reducing agent thathelps to convert Ce⁴⁺→Ce³⁺ ions.     

Investigation of structural,physical and optical properties of CeO2–Bi2O3–B2O3 glasses

xCeO₂–30Bi₂O₃–(70−x) B₂O₃ glasses are synthesized by using the melt quench technique. A number of studies such as XRD, density, molar volume, optical band gap, refractive index and FTIR spectroscopy are employed to characterize the glasses. The band gap decreases from 2.15 to 1.61 eV, refractive index increases from 2.67 to 2.93 and density increases from 4.151 to 4.633 g/cm³. The decrease in band gap with CeO₂ doping approaches the semiconductor behavior. FTIR spectroscopy reveals that incorporation of CeO₂ into glass network helps to convert the structural units of [BO₃] into [BO₄] and results in Bi–O bond vibration of [BiO₆].     

Structural investigation of xAg2O·(100−x)·[2B2O3·As2O3] glasses doped with manganese ions

Structural analysis of x[(100−y)Ag₂O·yMnO]·(100−x)[2B₂O₃·As₂O₃] glasses, with x=10 mol% and 0≤y≤10 mol%, was performed by means of FT-IR and FT-Raman spectroscopies. The purpose of this work is to investigate the structural changes that appear in the xAg₂O·(100−x)·[2B₂O₃·As₂O₃] glasses with the addition and increase in manganese ions content. FT-IR measurements revealed the presence of pyro-, ortho-, di-, tri-, tetra- and penta-borate groups and structural units characteristic to As₂O₃ in the structure of the studied glasses. FT-IR spectroscopy measurements also show that BO₃ units are the main structural units of the glass system. The presence of structural units characteristic to Ag₂O were not directly evidenced by FT-IR spectroscopy. In addtition, the FT-Raman analysis evidenced the presence of boroxol rings in the structure of the studied glasses.     

EPR and Optical Studies of Mo<Superscript>5+</Superscript> Ions in Lithium Molybdoborate Glasses

Electron paramagnetic resonance (EPR) and optical absorption studies of Li₂O–MoO₃–B₂O₃ with varying concentrations of Li₂O, MoO₃ and B₂O₃ have been carried out at room temperature. Two series of glasses, one with constant MoO₃ (CM) and another with constant borate (CB), have been investigated. Characteristic EPR spectra of Mo⁵⁺ have been observed centered around g ≅ 2.00, which are attributed to Mo⁵⁺ ion in an octahedral coordination sphere with an axial distortion. The spectra also show strong dependence on the concentration of Li₂O and B₂O₃. Spin concentrations (N) and magnetic susceptibilities (χ) have been calculated. In the CM series, the N values decrease with increasing Li₂O content up to 30 mol%, while in the CB series variation of N is found to increase initially up to 20 mol%, and with further increase in the Li₂O content the N values tend to decrease. The variation of magnetic susceptibilities is almost similar to that observed with the variation of N. From the optical absorption spectra, an absorption edge (α) has been evaluated. In the CM series, the values of α show a blueshift. On the other hand, in the CB series a redshift is observed. The observed variations in spectral parameters are explained by considering the molybdoborate network. Addition of Li₂O to the CM and CB series results in modification of [MoO_6/2]⁰ → [MoOO_5/2]⁻ and [BO_3/2]⁰ → [BO_4/2]⁻ → [BOO_2/2]⁻ groups, respectively, leading to creation of nonbridging oxygens. The optical basicity of the glasses has been evaluated in both the CM and the CB glasses. The optical basicity can be used to classify the covalent-to-ionic ratios of the glass, since an increasing optical basicity indicates decreasing covalency. It is observed that the covalency between Mo⁵⁺ ions and oxygen ligands increases in the CB series, whereas in the CM series the covalency between Mo⁵⁺ ions and oxygen ligands decreases. Authors' address: R. P. Sreekanth Chakradhar, Glass Technology Laboratory, Central Glass and Ceramic Research Institute, Kolkata 700032, India     

Inelastic light scattering in strontium borate glasses in the systemxSrO.(1−x)B2O3 and (SrCl2) y .[xSrO.(1−y−x)B2O3]1−y

Raman spectra of strontium borate binary glasses in the systemxSrO.(1-x)B₂O₃ forx=0.20, 0.25, 0.30, 0.35, 0.40, and 0.50 and ternary glasses in the system (SrCl₂) _y .[xSrO.(1−y−x)B₂O₃]_1−y fory=0.10, 0.20, 0.30 and 0.40 andx=0.20 and 0.35, are reported. Raman spectra of the glasses show experimental evidence of glass network modifying nature of SrO in borate matrix. SrO causes a change of boron atom coordination number from 3 to 4 resulting in the complex structural groupings comprising of BO₄ and BO₃ units. Strontium cations are not easily accommodated in the glass structure and tend to break up the network at high concentration (x) of SrO, causing non-bridging oxygens. The effect of temperature variation of binary glasses has also been studied. The introduction of SrCl₂ to the binary stronium borate glass causes a large change in intensity of low frequency Raman scattering whereas there is no change in the vibrational dynamics in the high frequency region. The temperature reduced Raman spectra represents true vibrational density of states. Martin-Brenig model developed for the low frequency region has been discussed to obtain the structural correlation range in the glass.     

Network structure and thermal property of a novel high temperature seal glass

In this study, novel glasses based on SrO–La₂O₃–Al₂O₃–B₂O₃–SiO₂ system are investigated for solid oxide fuel and electrolyzer cells. The network structure evolution of the glasses with increasing B₂O₃:SiO₂ ratio was studied using Raman spectroscopy. The thermal properties of the glasses, including glass transition temperature T _g and glass softening temperature T _d , were studied using dilatometry. The thermal stability of the glasses was investigated using X-ray diffraction. The study shows that as the B₂O₃:SiO₂ ratio increases, the SrO–La₂O₃–Al₂O₃–B₂O₃–SiO₂ glass micro-heterogeneity and the amount of non-bridging oxygen atoms increase. Correspondingly, the T _g of the SrO–La₂O₃–Al₂O₃–B₂O₃–SiO₂ glasses changes from 635 to 775°C, and the T _d changes from 670 to 815°C. Glass thermal stability decreases with B₂O₃:SiO₂ ratio increase. The glass without B₂O₃ is thermally stable after being kept at 850°C for 200 hrs.     

FTIR structural investigation of gamma irradiated BaO–Na2O–B2O3–SiO2 glasses

Fourier transform infrared (FT-IR) spectra of xBaO–15Na₂O–(70−x)B₂O₃–15SiO₂ glass system with x=0, 5, 10, 15 and 20 (mol%) has been measured in the spectral range 400–4000 cm⁻¹ at room temperature in order to understand the characteristic frequencies of the chemical bonds and bonding mechanisms, which are susceptible to the structural and spectral changes. The effect of gamma irradiation in the dose range 0.1 kGy–60 kGy on the infrared absorption spectra of these glasses is also reported. The change in the glass structure due to the effect of composition is also discussed. It has been observed that irradiation of the glasses with the gamma rays increases the BO₃ groups and the non bridging oxygens which make the network loose.     

Ultrasonic relaxation in Zinc-Borate glasses

Borate glasses in the system (1 − x) [29Na₂O − 4Al₂O₃ − 67B₂O₃] − x ZnO with (x = 0, 5, 10, 15, 20, 25, 30, and 35 mol%), have been prepared by the melt quenching technique. The longitudinal ultrasonic attenuation of the prepared sample has been measured using the pulse echo technique at ultrasonic frequencies 2, 4, 6 and 8 MHz in the temperature range between 160 and 300 K. The results showed well-defined peak whose position shifts toward higher temperature with increasing frequency. The mean activation energy is strongly composition sensitive. The position and overall shape of the loss peaks in dependence on composition were analyzed in terms of an assumed loss of standard linear solid type with low dispersion, and a broad distribution of Arrhenius-type relaxation with temperature independent relaxation strength. The dependence of ultrasonic attenuation on temperature has been interpreted in terms of a thermally activated relaxation process which arises when ultrasonic waves disturb the equilibrium of an atom moving in a double-well potential in the glass network. The dependence of activation energy on composition suggests that the structure of these glasses changes at 15 mol% ZnO concentration.     

IR spectra of tellurium germanate glasses and their structure

We have used IR spectroscopy to study the structure of tellurium germanate glasses synthesized in the system TeO₂-GeO₂-B₂O₃-PbO. The structure of the glasses consists of [BO₃], [BO₄], [GeO₄], [GeO₆], [TeO₃], and [PbO₆] groups. Changes in the coordination of boron and germanium ions occur when the PbO and GeO₂ contents in the glasses increase. The glasses are attractive for designing optical and laser devices. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 1, pp. 78–81, January–February, 2007.     

Optical and other spectroscopic studies of lead, zinc bismuth borate glasses doped with CuO

10MO·20Bi₂O₃·(70−x)B₂O₃·xCuO [M=Pb, Zn] with x=0, 0.4 and 0.8 (wt%) glasses were synthesized by the melt-quenching technique and were characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. Physical parameters, like density, and spectroscopic studies (optical absorption, EPR, FTIR and photoluminescence) were used to understand the role of modifier oxide and CuO in the glass matrix. A red shift of the absorption band corresponds to ²B_1g→²B_2g transition of Cu²⁺ ions from P2 to Z4 samples and the increase of hyperfine splitting factor (A_‖) from P2 to Z2 shows that with the integration of PbO by ZnO the electron density around copper ion is increased. It is also supported by the gradual increase in theoretical optical basicity values of ZnO mixed glasses, as compared to that of PbO mixed glass matrix. Reduced bismuth radicals are found in undoped and 0.4% CuO doped glasses of both the series. Analysis of the absorption and emission studies indicates that the concentration of luminescence centers of bismuth ions (Bi³⁺ ions in UV region) is decreased by the integration of ZnO as well as by increasing the dopant concentration. In lead series PbO₄ and BiO₃ units are increased from P2 to P4 and in zinc series BiO₃ units are decreased from Z0 to Z4. The conductivity of the glass matrices is increased in both the series with the dopant of CuO.     

Synthesis of Cr-based mixed oxides by reactive ion beam mixing of Cr/X interfaces (X=Al or Si)

The 3 keV O₂⁺\mathrm{O}_{2}^{+} reactive ion beam mixing of Cr/X interfaces (X=Al or Si) has been used to synthesize Cr-based mixed oxide thin films. The kinetics of growth, composition, and electronic structure of those films has been studied using X-ray photoelectron spectroscopy, Auger electron spectroscopy, ultraviolet photoelectron spectroscopy, and factor analysis. Initially, for low ion doses, Cr₂O₃ species are formed. Later, with increasing the ion dose, Cr₂O₃ species are first transformed into Cr³⁺–O–X species, and subsequently, those Cr³⁺–O–X species are transformed into Cr⁶⁺–O–X species. This sequential transformation, Cr₂O₃→Cr³⁺–O–X→Cr⁶⁺–O–X, is accompanied by a slight increase of the oxygen concentration and a decrease of the Cr/X ratio in the films formed leading to the synthesis of custom designed Cr-based mixed oxides. The changes observed in the valence band and Auger parameters further support the formation of Cr–X mixed oxide species. Angle resolved X-ray photoelectron spectroscopy shows that for low ion doses, when only Cr₂O₃ and Cr³⁺–O–X species coexist, Cr³⁺–O–X species are located nearer the surface than Cr₂O₃ species, whereas for higher ion doses, when only Cr³⁺–O–X and Cr⁶⁺–O–X species coexist, the Cr⁶⁺–O–X species are those located nearer the surface.     

Optical and IR study of Li2O–CuO–P2O5 glasses

Infrared (IR) and UV spectra of ternary Li₂O–CuO–P₂O₅ glasses in two series Li₂O(65−X)%–CuO(X%)–P₂O₅(35%), X = 20, 30, 40 and Li₂O(55−X)%–CuO(X%)–P₂O₅(45%), X = (10, 20, 30) were studied. Infrared (IR) investigations showed the metaphosphate and pyrophosphate structures and with increase of CuO content in metaphosphate glass, the skeleton of metaphosphate chains is gradually broken into short phosphate groups such as pyrophosphate. IR spectra showed one band at about 1,220 and 1,260 cm⁻¹ for P₂O₅(35%) and P₂O₅(45%) series, respectively, assigned to P=O bonds. For CuO additions ≤20 mol%, the glasses exhibit two bands in the frequency range 780–720 cm⁻¹ which are attributed to the presence of two P–O–P bridges in metaphosphate chain. But for CuO addition ≥30 mol%, the glasses exhibit only a single band at 760 cm⁻¹ which is assigned to the P–O–P linkage in pyrophosphate group. In optical investigations, absorption coefficient versus photon energy showed three regions: low energy side, Urbach absorption, and high energy side. In Urbach’s region, absorption coefficient depends exponentially on the photon energy. At high energy region, optical gap was calculated and investigations showed indirect transition in compounds and decreases in optical gap with increases of copper oxides contents that is because of electronic transitions and increasing of nonbridging oxygen content.     

LiF-LiCl-B2O3系统非晶态快离子导体结构的研究

本文通过对¹¹B核磁共振(¹¹B-NMR)、红外光谱等实验方法,研究了LiF-LiCl-B₂O₃三元系统玻璃的结构和离子导电性,着重于F^-离子在玻璃网络中所起的作用,以及F^-,Cl^-和Li⁺离子对导电率的影响。LiF-LiCl-B₂O₃三元系统玻璃,随LiF含量的增加,B由三角体向四面体变化,从而F^-离子进入网络,使玻璃结构由[B₂O₃]三角体层状结构向三维空间延展,形成了含有[BO₃F]基团的三维空间网络,Cl^-离子以游离的离子存在于网络中,起着松散网络的作用,对提高电导率有利,而Li⁺离子作为传导离子,对电导率的贡献是主要的。本系统玻璃的电导率是随LiF,LiCl含量的增加而增大,在300℃时测得电导率σ=6.12×10^-4Ω^-1·cm^-1。 关键词：     

Spectroscopic Properties of Er3+/Yb3+-codoped PbO–Bi2O3–Ga2O3–GeO2 Glasses

We investigate the spectroscopic properties of the 1.5-μm emission from the ⁴I_13/2 → ⁴I_15/2 transition of Er³⁺ ions in PbO–Bi₂O₃–Ga₂O₃–GeO₂ glasses for applications in broadband fiber amplifiers. The measured emission peak locates at 1,532 nm with a full width at half-maximum of ∼45 nm. The glasses exhibit a large stimulated emission cross-section of 0.89 × 10⁻²⁰ cm² and a large product of 40.0. Infrared-to-green upconversion occurs simultaneously upon excitation of the 1.5-μm emission with a commercially available 980 nm laser diode. The green-upconversion intensity has a quadratic dependence on incident pump laser power, indicating a two-photon process. Energy transfer processes and nonradiative phonon-assisted decays could account for the population of the ²H_11/2 of Er³⁺. The results indicate the possibility towards the development of lead–bismuth–gallate–germanate based glasses as photonics devices.     

Structural and optical properties of WO3-ZnO-PbO-B2O3 glasses

Glass samples of compositions 20PbO-80B₂O₃ and xWO₃—(20−x) ZnO-20PbO-60B₂O₃ with x varying from 0% to 10% mole fraction are prepared by the melt quench technique. Decrease in the band gap from 2.86 to 2.16 eV for ZnO-PbO-B₂O₃ glasses with an increase in the WO₃ content has been observed and discussed. The FTIR spectral studies have pointed out the conversion of structural units of BO₃ to BO₄ and WO₄ to WO₆ with the presence of W-O-W vibration of tungsten and incorporation of ZnO₄ structural units of zinc in these glasses. The increase in density from 2.75 to 4.03 gcm⁻³ for ZnO-PbO-B₂O₃ glasses is observed with an increase in WO₃ content. Due to the formation of WO₆, WO₄ and BO₄ units, changes in the atomic structure with WO₃ composition are observed and discussed.     

Investigation of Glasses and Glaze Coats of Composition R2O–RO–Fe2O3(FeO)–Al2O3–B2O3–SiO2 by the EPR Method

The valence state and the coordination environment of the paramagnetic centers of iron ions in glasses and vitreous coats of composition R₂O–RO–Fe₂O₃(FeO)–Al₂O₃–B₂O₃–SiO₂ have been investigated by the EPR method. The tetrahedral and octahedral coordinations of Fe³⁺ ions have been revealed. The character of change in the EPR spectra of the materials studied in the vitreous and vitrocrystalline state has been determined. It is shown that the coordination number of iron ions is dependent on the crystallization processes.     

锂硼钒酸盐玻璃的11B核磁共振研究

用¹¹B连续波核磁共振谱研究了锂硼钒酸盐玻璃的结构,测量了BO₄,BO_3s和BO_3A各结构单元的比例。实验表明,锂硼钒酸盐玻璃中N₄的最大值近似为一常数,与V₂O₅的含量无关。Li₂O被V₂O₅和B₂O₃分享。并推测V₂O< 关键词：     

Effect of B2O3 on the structure and properties of tungsten–tellurite glasses

The elastic properties and Debye temperatures of xB₂O₃–70TeO₂–(30–x)WO₃, (0 ≤ x ≤ 30 mol%) glasses have been investigated using sound velocity measurements at 4 MHz. Ultrasonic and thermal parameters, combined with the results of IR spectroscopic analyses, were employed to explore the effect of B₂O₃ on the structure of tungsten–tellurite glasses. According to IR analysis, there is competition between WO₆ and TeO₄ units to form BO₄ units, and the vibrations of the tellurite structural units are shifted towards lower wavenumbers on the formation of non-bridging oxygens. It is assumed that B₂O₃ acts as a modifier by decreasing the glass-transition temperature T _g and increasing both the thermal stability and glass formation range of the tellurite glasses. The change in density and molar volume with B₂O₃ content reveals that the borate units are less dense than the tellurite structural units. The observed compositional dependence of elastic moduli is interpreted in terms of the effect of B₂O₃ on the coordination number of the tellurite units. A good correlation was observed between experimentally determined elastic moduli and those computed with the Makishima–Mackenzie model.