Synthesis of Novel Fluorescent 2‐{4‐[1‐(Pyridine‐2‐yl)‐1H‐pyrazol‐3‐yl] phenyl}‐2H‐naphtho [1,2‐d] [1,2,3] triazolyl Derivatives and Evaluation of Their Thermal and Photophysical Properties

Novel 2‐{4‐[1‐(pyridine‐2‐yl)‐1H‐pyrazol‐3‐yl] phenyl}‐2H‐naphtho [1,2‐d] [1,2,3] triazolyl fluorescent derivatives were synthesized from p‐nitrophenylacetic acid and 2‐hydrazino pyridine through Vilsmeier–Haack and diazotization reactions. Photophysical properties were evaluated, and results show that compounds have good fluorescence quantum yields. Thermal analysis showed that they are reasonably stable. The structures of the compounds were confirmed by FT‐IR, ¹H NMR, ¹³C NMR, and mass spectral and elemental analysis.     

Conformational study of (Z)‐5‐(4‐chlorobenzylidene)‐2‐[4‐(2‐hydroxyethyl)piperazin‐1‐yl]‐3H‐imidazol‐4(5H)‐one in different environments: insight into the structural properties of bacterial efflux pump inhibitors

The 2‐amine derivatives of 5‐arylidene‐3H‐imidazol‐4(5H )‐one are a new class of bacterial efflux pump inhibitors, the chemical compounds that are able to restore antibiotic efficacy against multidrug resistant bacteria. 5‐Arylidene‐3H‐imidazol‐4(5H )‐ones with a piperazine ring at position 2 reverse the mechanisms of multidrug resistance (MDR) of the particularly dangerous Gram‐negative bacteria E. coli by inhibition of the efflux pump AcrA/AcrB/TolC (a main multidrug resistance mechanism in Gram‐negative bacteria, consisting of a membrane fusion protein, AcrA, a Resistant‐Nodulation‐Division protein, AcrB, and an outer membrane factor, TolC). In order to study the influence of the environment on the conformation of (Z )‐5‐(4‐chlorobenzylidene)‐2‐[4‐(2‐hydroxyethyl)piperazin‐1‐yl]‐3H‐imidazol‐4(5H )‐one, ( 3 ), two different salts were prepared, namely with picolinic acid {systematic name: 4‐[(Z )‐4‐(4‐chlorobenzylidene)‐5‐oxo‐3,4‐dihydro‐1H‐imidazol‐2‐yl]‐1‐(2‐hydroxyethyl)piperazin‐1‐ium pyridine‐2‐carboxylate, C₁₆H₂₀ClN₄O₂⁺·C₆H₄NO₂⁻, ( 3 a )} and 4‐nitrophenylacetic acid {systematic name: 4‐[(Z )‐4‐(4‐chlorobenzylidene)‐5‐oxo‐3,4‐dihydro‐1H‐imidazol‐2‐yl]‐1‐(2‐hydroxyethyl)piperazin‐1‐ium 2‐(4‐nitrophenyl)acetate, C₁₆H₂₀ClN₄O₂⁺·C₈H₆NO₄⁻, ( 3 b )}. The crystal structures of the new salts were determined by X‐ray diffraction. In both crystal structures, the molecule of ( 3 ) is protonated at an N atom of the piperazine ring by proton transfer from the corresponding acid. The carboxylate group of picolinate engages in hydrogen bonds with three molecules of the cation of ( 3 ), whereas the carboxylate group of 4‐nitrophenylacetate engages in hydrogen bonds with only two molecules of ( 3 ). As a consequence of these interactions, different orientations of the hydroxyethyl group of ( 3 ) are observed. The crystal structures are additionally stabilized by both C—H…N [in ( 3 a )] and C—H…O [in ( 3 a ) and ( 3 b )] intermolecular interactions. The geometry of the imidazolone fragment was compared with other crystal structures possessing this moiety. The tautomer observed in the crystal structures presented here, namely 3H‐imidazol‐4(5H )‐one [systematic name: 1H‐imidazol‐5(4H )‐one], is also that most frequently observed in other structures containing this heterocycle.     

One‐Pot Syntheses of 2‐(2‐Sulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetic Acid Derivatives via Reactions of 3‐(2‐Isothiocyanatophenyl)prop‐2‐enoic Acid Derivatives with Thiols or Sodium Sulfide

Two efficient methods for the preparation of 2‐(2‐sulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetic acid derivatives 3 under mild conditions have been developed. The first method is based on the reaction of 3‐(2‐isothiocyanatophenyl)prop‐2‐enoates 1a – 1c with thiols in the presence of Et₃N in THF at room temperature, leading to the corresponding dithiocarbamate intermediates 2 , which underwent spontaneous cyclization at the same temperature by an attack of the S‐atom at the prop‐2‐enoyl moiety in a 1,4‐addition manner (Michael addition) to give 2‐(2‐sulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetates in one pot. The second method involves treatment of 3‐(2‐isothiocyanatophenyl)prop‐2‐enoic acid derivatives 1b – 1d with Na₂S leading to the formation of 2‐(2‐sodiosulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetic acid intermediates 5 by a similar addition/cyclization sequence, which are then allowed to react with alkyl or aryl halides to afford derivatives 3 . 2‐(2‐Thioxo‐4H‐3,1‐benzothiazin‐4‐yl)acetic acid derivatives 6 can be obtained by omitting the addition of halides.     

Mono‐ and Di‐Potassium Derivatives of Benzenepentacarboxylic Acid

The synthesis and structure of the hydrated mono‐ and di‐potassium salts of benzenepentacarboxylic acid are reported – [K(H₄BPC)(H₂O)₂]·(H₂O) 1 and [K₂(H₃BPC)(H₂O)₃]·(H₂O) 2 (BPC = benzenepentacarboxylate). In both instances the structures are complex coordination networks, predominantly containing η¹ binding modes of the carboxylate and carboxylic acid groups, although bridging (O,O) and (O,O′) carboxylates and μ₂‐H₂O ligands also feature. Extensive hydrogen bonding is present through the carboxylic acid groups and both coordinated and interstitial water molecules.     

Synthesis of 2‐Aryl‐ and 2‐Heteroaryl‐3,5‐dimethoxy‐1,4‐benzoquinones Involving Pd‐Catalyzed Cross‐Coupling of (2,3,4,6‐Tetramethoxyphenyl)boronic Acid

A series of 2‐aryl‐ and 2‐heteroaryl‐substituted 3,5‐dimethoxy‐1,4‐benzoquinones (compounds 27 – 36 ) have been synthesized by cross‐coupling of (2,3,4,6‐tetramethoxyphenyl)boronic acid ( 2 ) with aromatic bromides or iodides in the presence of [Pd⁰(Ph₃)₄] and Na₂CO₃, followed by AgO‐promoted oxidation of the resulting biaryl compounds 17 – 26 .     

Solvent‐ and Temperature‐Controlled In Situ Ligand Reactions Mediated by CuII and 3′‐[(E)‐{[(1S,2S)‐2‐Aminocyclohexyl]imino}methyl]‐4′‐hydroxy‐4‐biphenylcarboxlic Acid

Three new compounds, CuL, CuL′, and Cu₂O₂L′′₂ (H₂L=3′‐[(E)‐{[(1S,2S)‐2‐aminocyclohexyl]imino}methyl]‐4′‐hydroxy‐4‐biphenylcarboxlic acid, H₂L′=3′‐[(E)‐{[(1S,2S)‐2‐aminocyclohexyl]imino}methyl]‐4′‐hydroxy‐5′‐nitro‐4‐biphenylcarboxlic acid, H₂L′′=3′‐(N,N‐dimethylamino methyl)‐4′‐hydroxy‐4‐biphenylcarboxlic acid), were selectively synthesized through a controlled in situ ligand reaction system mediated by copper(II) nitrate and H₂L. Selective nitration was achieved by using different solvent mixtures under relatively mild conditions, and an interesting and economical reductive amination system in DMF/EtOH/H₂O was also found. All crystal structures were determined by single‐crystal X‐ray diffraction analysis. Both CuL and CuL′ display chiral 1D chain structures, whereas Cu₂O₂L′′₂ possesses a structure with 13×16 Å channels and a free volume of 41.4 %. The possible mechanisms involved in this in situ ligand‐controlled reaction system are discussed in detail.     

Magnetic Graphene Oxide Anchored Sulfonic Acid as a Novel Nanocatalyst for the Synthesis of N‐aryl‐2‐amino‐1,6‐naphthyridines

Magnetic graphene oxide functionalized with sulfonic acid (Fe₃O₄‐GO‐SO₃H) was used as a new recyclable nanocatalyst for one‐pot synthesis of N‐aryl‐2‐amino‐1,6‐naphthyridine derivatives under solvent free conditions. The catalyst could be easily recovered from the reaction mixture by an external magnet and reused without significant decrease in activity even after 4 runs. This nanocatalyst exhibited better activities to other commercially available sulfonic acid catalysts.     

Two Ala‐Gln Dipeptide‐based Supramolecular Layers Decorated with Amino Acid Residues

l‐Alanyl‐glutamine dipeptide assembles with Cu^II ions to give the 2D coordination framework [Cu₂(C₈H₁₃N₃O₄)₂·2H₂O]_n ( 1 ) in which amino acid residues result in specific void space. In presence of 4,4′‐bipyridine, framework 1 is turned into a binuclear complex [Cu₂(C₈H₁₃N₃O₄)₂(H₂O)₂(C₁₀H₈N₂)·8H₂O] ( 2 ), which is further linked into a 2D hydrogen‐bonded layer in which amino acid residues induce a hydrogen‐bonded water cluster containing eight water molecules in the void space.     

Biotransformation of p‐Coumaric Acid (=(2E)‐3‐(4‐Hydroxyphenyl)prop‐2‐enoic Acid) by Momordica charantia Peroxidase

LC/MS³‐Guided biotransformation of p‐coumaric acid (=(2E)‐3‐(4‐hydroxyphenyl)prop‐2‐enoic acid; CA) with H₂O₂/Momordica charantia peroxidase at pH 5.0 and 45° in the presence of acetone has resulted in the isolation of three CA trimers, triCA1 ( 1 ), triCA2 (trans‐ 2 ), and triCA3 (cis‐ 2 ), and seven CA dimers, diCA1–diCA7, i.e., 3 – 9 , among which seven (triCA1–triCA3 and diCA1–diCA4) are new compounds and three (diCA5–diCA7) are known compounds. The structures were established by 2D‐NMR such as HSQC, HMBC, and NOESY measurements. The possible mechanism for the formation of the products is also discussed (Schemes 1–3). This is the first time that the biotansformation of p‐coumaric acid catalyzed by peroxidase in vitro was achieved. Compounds triCA3 (cis‐ 2 ), diCA1 ( 3 ), diCA5 ( 7 ), and diCA7 ( 9 ) exhibit a stronger antioxidative activity than the parent CA.     

pH‐Dependent Self‐Assembly of Complexes with Tripodal Amino Acid Ligand

Three new metal complexes were synthesized by reactions of [bis(2‐amino‐ethyl)‐amino]‐acetic acid (HL) and different metal salts at different pH values. Their structures were characterized by X‐ray crystallography. Interestingly, under acidic conditions, the dinuclear structure {Cu₂[H(L)]₂Cl₂}(ClO₄)₂ ( 1 ) was obtained, whereas under alkaline conditions, the complexes {[Cu(L)](ClO₄)}_n ( 2 ) and [Cd(L)Cl]_n ( 3 ), which exhibit distinct one‐dimensional (1D) structures, were obtained. The results indicate that the pH value, metal ions, and anions have remarkable influence on the formation and structure of the complexes.     

Hydrothermal Syntheses and Crystal Structures of Two New Three‐dimensional Coordination Polymers Based on 4‐Pyrid‐3‐ylbenzoic Acid

Two new coordination polymers [Co₂(pbc)₄(H₂O)]_n ( 1 ) and [Mn(pbc)₂] ( 2 ) (Hpbc = 4‐pyrid‐3‐ylbenzoic acid) were obtained by hydrothermal reaction and characterized by elemental analysis, IR spectroscopy, and single‐crystal X‐ray diffraction. Compound 1 features a 3D network with a four‐connected 6⁶ net constructed from secondary building units of dinuclear cobalt. Compound 2 exhibits a six‐connected 4¹² · 6³ topology based on dinuclear manganese.     

pH Dependent Synthesis of NdIII Coordination Compounds Based on Bifunctional 5‐(4‐Pyridyl)tetrazole‐2‐acetic Acid

The Nd^III coordination compounds [Nd(4‐pytza)₃(H₂O)₂] · 2H₂O ( 1 ) and [Nd(4‐pytza)₂(H₂O)₄]Cl · 2H₂O ( 2 ) [H4‐pytza = 5‐(4‐pyridyl)tetrazole‐2‐acetic acid] were synthesized by reactions of K4‐pytza and NdCl₃ · 6H₂O at different pH values. Single crystal X‐ray diffraction analysis reveals that 4‐pytza ligands in 1 in a μ_1,3‐COO syn‐syn or μ_1,1,3‐COO bridging mode coordinate to two central Nd^III atoms to display a dinuclear unit, which is connected by one of these 4‐pytza ligands acting in end‐to‐end bridging mode to form a 1D ladder‐like chain. Different from 1 , each 4‐pytza in 2 with a μ_1,3‐COO syn‐anti bridging mode coordinates to two Nd^III atoms to display a 1D zigzag chain. Furthermore, the luminescence properties of 1 and 2 were investigated at room temperature in the solid state.     

One‐dimensional Europium(III) Coordination Polymer Based on 3‐Pyridylacrylic Acid

Under hydrothermal conditions, the reaction of racemic 3‐pyridyl‐3‐aminopropionic acid (rac‐HPAPA) with Eu(ClO₄)₃· 6H₂O affords a 1‐D chain complex, [Eu(3‐PYA)₃(H₂O)]_n ( 1 ) (3‐PYA=3‐pyridylacrylate), which represents an example of neutral 1‐D coordination polymeric material based on 3‐HPYA (HPYA= pyridylacrylic acid) ligand with strong red fluorescent emission in the solid state.     

Co‐crystals based on 1,2,4,5‐Benzenetetracarboxylic Acid: Synthesis,Supramolecular Frameworks and Optical Properties

Two new co‐crystals based on 1,2,4,5‐benzenetetracarboxylic acid, (H₂BETC)(H₄tpim)](NO₃) ( 1 ) and [(H₄BETC)_0.5(H₂BETC)_0.5(HVB4)](H₂O) ( 2 ) [H₄BETC = 1,2,4,5‐benzenetetracarboxylic acid, Htpim = 2,4,5‐tri(4‐pyridyl)‐imidazole, and VB4 = adenine], were synthesized and characterized by elemental analyses, IR spectroscopy, single‐crystal X‐ray diffraction, and X‐ray powder diffraction analysis. Compounds 1 and 2 were further assembled to form 3D supramolecular frameworks with 1D channels by intermolecular C–H ··· O, O–H ··· O, and N–H ··· O hydrogen‐bonding interactions. The results reveal that the structural differences of 1 and 2 may be attributed to different molecular components. Moreover, the UV/Vis and luminescent spectra of ligands and corresponding compounds were briefly investigated.     

Two‐Dimensional and Three‐Dimensional Lanthanide Coordination Polymers Built from 4‐Hydroxypyridine‐2,6‐dicarboxylic Acid Ligand

4‐Hydroxypyridine‐2,6‐dicarboxylic acid (H₃CAM) reacts with Ln₂O₃(Ln = La, Ce) or Ln(NO₃)₃ (Ln = Sm, Dy, Gd, Ho) in hydrothermal reactions to form a series of lanthanide coordination polymers 1 – 6 . Elemental analysis, IR spectra and X‐ray crystal structure analysis were carried out to determine the composition and crystal structure of 1 – 6 . Compounds 1 and 2 are isostructural and contain tetranuclear metallic ring unit and 3D framework. 4 – 6 are isostructural contain 2D network. Furthermore, the photoluminescent properties of 3 and 4 at room temperature were also studied.     

Hydrothermal Synthesis of Two High‐dimensional Architectures Based on Bridging Ligand Pyridine‐2,3‐dicarboxylic Acid

Two novel metal‐organic coordination polymers [Zn₂(PDC)₂·H₂O]_n ( 1 ) and [Zn₂La₂(OH)(NO₃)(PDC)₄‐ (H₂O)₆·2H₂O]_n ( 2 ) (PDC??pyridine‐2,3‐dicarboxylic acid) have been synthesized by hydrothermal pretreatment and cooling‐down crystallization. X‐ray diffraction analyses reveal that they posses the 3D frameworks. Frame work 1 has been accomplished by using building blocks Zn‐PDC with beautiful undulances. Frame work 2 is a new 3d‐4f heterometallic polymer with a distinctive mono‐ and dinuclear mixed one sinusoidal‐like wave viewed along the b axis.     

Nylon Intermediates from Bio‐Based Levulinic Acid

Use of ZrO₂/SiO₂ as a solid acid catalyst in the ring‐opening of biobased γ‐valerolactone with methanol in the gas phase leads to mixtures of methyl 2‐, 3‐, and 4‐pentenoate (MP) in over 95 % selectivity, containing a surprising 81 % of M4P. This process allows the application of a selective hydroformylation to this mixture to convert M4P into methyl 5‐formyl‐valerate (M5FV) with 90 % selectivity. The other isomers remain unreacted. Reductive amination of M5FV and ring‐closure to ?‐caprolactam in excellent yield had been reported before. The remaining mixture of 2‐ and 3‐MP was subjected to an isomerising methoxycarbonylation to dimethyl adipate in 91 % yield.     

Model Construction for the A–B–C Ring System of Lysergic Acid via Vilsmeier–Haack‐Type Cyclization of 1H‐Indole‐4‐propanoic Acid Derivatives

Vilsmeier–Haack‐type cyclization of 1H‐indole‐4‐propanoic acid derivatives was examined as model construction for the A–B–C ring system of lysergic acid ( 1 ). Smooth cyclization from the 4 position of 1H‐indole to the 3 position was achieved by Vilsmeier–Haack reaction in the presence of K₂CO₃ in MeCN, and the best substrate was found to be the N,N‐dimethylcarboxamide 9 (Table 1). The modified method can be successfully applied to an α‐amino acid derivative protected with an N‐acetyl function, i.e., to 27 (Table 2); however, loss of optical purity was observed in the cyclization when a chiral substrate (S)‐ 27 was used (Scheme 5). On the other hand, the intramolecular Pummerer reaction of the corresponding sulfoxide 20 afforded an S‐containing tricyclic system 22 , which was formed by a cyclization to the 5 position (Scheme 3).     

Proton‐Conductive 3D LnIII Metal–Organic Frameworks for Formic Acid Impedance Sensing

Metal‐organic frameworks (MOFs) as new classes of proton‐conducting materials have been highlighted in recent years. Nevertheless, the exploration of proton‐conducting MOFs as formic acid sensors is extremely lacking. Herein, we prepared two highly stable 3D isostructural lanthanide(III) MOFs, {(M(μ₃‐HPhIDC)(μ₂‐C₂O₄)_0.5(H₂O))?2 H₂O}_n (M=Tb ( ZZU‐1 ); Eu ( ZZU‐2 )) (H₃PhIDC=2‐phenyl‐1H‐imidazole‐4,5‐dicarboxylic acid), in which the coordinated and uncoordinated water molecules and uncoordinated imidazole N atoms play decisive roles for the high‐performance proton conduction and recognition ability for formic acid. Both ZZU‐1 and ZZU‐2 show temperature‐ and humidity‐dependent proton‐conducting characteristics with high conductivities of 8.95×10^?4 and 4.63×10^?4 S cm^‐1 at 98 % RH and 100 °C, respectively. Importantly, the impedance values of the two MOF‐based sensors decrease upon exposure to formic acid vapor generated from formic aqueous solutions at 25 °C with good reproducibility. By comparing the changes of impedance values, we can indirectly determine the concentration of HCOOH in aqueous solution. The results showed that the lowest detectable concentrations of formic acid aqueous solutions are 1.2×10^?2 mol L^?1 by ZZU‐1 and 2.0×10^?2 mol L^?1 by ZZU‐2 . Furthermore, the two sensors can distinguish formic acid vapor from interfering vapors including MeOH, N‐hexane, benzene, toluene, EtOH, acetone, acetic acid and butane. Our research provides a new platform of proton‐conductive MOFs‐based sensors for detecting formic acid.     

A 3D Nickel(II) Coordination Polymer with cds Nets Constructed from 3‐Pyridin‐4‐yl‐benzoic Acid

A new coordination polymer, [Ni(3,4‐pybz)₂(H₂O)]_n ( 1 ), was hydrothermally synthesized from Ni(NO₃)₂ · 6H₂O and an unsymmetrical 3‐pyridin‐4‐yl‐benzoic acid (3,4‐Hpybz). It was characterized by IR spectroscopy, elemental analysis, thermogravimetric analysis, and single‐crystal X‐ray diffraction. In complex 1 , the 3,4‐pybz ligands act as linear linkers to join 4‐connected nickel(II) ion nodes, to build a 3D 4‐connected twofold interpenetrated 6⁵8‐cds coordination framework. In addition, the magnetic and thermal properties of complex 1 were also investigated.