Synthesis,photoluminescence, and electroluminescence characterization of double tetraphenylethene‐tethered BODIPY luminogens

Three double tetraphenylethene (TPE)‐tethered 4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indance (BODIPY) fluorophores, 35TPEBODP , 88TPEBODP , and 26TPEBODP , have been synthesized and characterized. The green 35TPEBODP with deep red fluorescence shows serious thermal decomposition in the purification process of sublimation, which prohibits its test for an organic light‐emitting diode (OLED) fabricated by the vacuum–thermal evaporation process. The tethered TPE is attached to BODIPY at three different positions, resulting in different photoluminescence (emission wavelength and quantum yield) and electroluminescence (EL). Different from TPE‐tethered BODIPY fluorophores reported in literature, none of the BODIPY fluorophores studied here exhibits aggregation‐induced emission (AIE), aggregation‐induced enhanced emission (AIEE), or twisted intramolecular charge transfer (TICT) characteristics. Although solution (10^?5 M THF) photoluminescence quantum yields (?s) are relatively high at 78%, 68%, and 86% for 35TPEBODP , 88TPEBODP , and 26TPEBODP , respectively, which are all higher than 41% of PhBODP (a non‐TPE‐tethered BODIPY), the ? is significantly decreased to 1–6% in 5 wt% dopant polystyrene thin film or as a solid powder, except for 13% of 26TPEBODP . Therefore, due to the low ? of dopant thin film or solid powder, either dopant or nondopant OLEDs exhibit inferior external quantum efficiency (EQE) and intensity of EL. The best OLED in this study is the 26TPEBODP device, and its EQE reaches 1.3%, and the highest EL intensity is approximately 1,600 cd/m².     

A Red‐Emissive Sextuple Hydrogen‐Bonding Self‐Assembly Molecular Duplex Bearing Perylene Diimide Fluorophores for Warm‐White Organic Light‐Emitting Diode Application

A novel sextuple hydrogen‐bonding (HB) self‐assembly molecular duplex bearing red‐emitting perylene diimide (PDI) fluorophores, namely PDIHB , was synthesized, and its molecular structure was confirmed by ¹H NMR, ¹³C NMR, TOF‐MS and 2D NMR. Compared with the small molecular reference compound PDI , PDIHB shows one time enhanced fluorescence efficiency in solid state (4.1% vs. 2.1%). More importantly, the presence of bulky HB oligoamide strands in PDIHB could trigger effective spatial separation between guest and host fluorophores in thin solid film state, hence inefficient energy transfer occurs between the blue‐emitting host 2TPhNIHB and red guest PDIHB in the 2 wt% guest/host blending film. As a result, a solution‐processed organic light‐emitting diode (OLED) with quite simple device structure of ITO/PEDOT:PSS (40 nm)/PVK (40 nm)/ PDIHB (2 wt%): 2TPhNIHB (50 nm)/LiF (0.8 nm)/Al (100 nm) could emit bias‐independent warm‐white electroluminescence with stable Commission Internationale de L'Eclairage coordinates of (0.42, 0.33), and the maximum brightness and current efficiency of this device are 260 cd·m^?2 and 0.49 cd·A^?1, respectively. All these results indicated that HB self‐assembly supramolecular fluorophores could act as prospective materials for white OLED application.     

A Novel trans‐1‐(9‐Anthryl)‐2‐phenylethene Derivative Containing a Phenanthroimidazole Unit for Application in Organic Light‐Emitting Diodes

Aryl‐substituted phenanthroimidazoles (PIs) have attracted tremendous attention in the field of organic light‐emitting diodes (OLEDs), because they are simple to synthesize and have excellent thermal properties, high photoluminescence quantum yields (PLQYs), and bipolar properties. Herein, a novel blue–green emitting material, (E)‐2‐{4′‐[2‐(anthracen‐9‐yl)vinyl]‐[1,1′‐biphenyl]‐4‐yl}‐1‐phenyl‐1H‐phenanthro[9,10‐d]imidazole (APE‐PPI), containing a t‐APE [1‐(9‐anthryl)‐2‐phenylethene] core and a PI moiety was designed and synthesized. Owing to the PI skeleton, APE‐PPI possesses high thermal stability and a high PLQY, and the compound exhibits bipolar transporting characteristics, which were identified by single‐carrier devices. Nondoped blue–green OLEDs with APE‐PPI as the emitting layer show emission at λ=508 nm, a full width at half maximum of 82 nm, a maximum brightness of 9042 cd m^?2, a maximum current efficiency of 2.14 cd A^?1, and Commission Internationale de L'Eclairage (CIE) coordinates of (0.26, 0.55). Furthermore, a white OLED (WOLED) was fabricated by employing APE‐PPI as the blue–green emitting layer and 4‐(dicyanomethylene)‐2‐tert‐butyl‐6‐(1,1,7,7‐tetramethyljulolidin‐4‐yl‐vinyl)‐4H‐pyran (DCJTB) doped in tris‐(8‐hydroxyquinolinato)aluminum (Alq₃) as the red–green emitting layer. This WOLED exhibited a maximum brightness of 10029 cd m^?2, a maximum current efficiency of 16.05 cd A^?1, CIE coordinates of (0.47, 0.47), and a color rendering index (CRI) of 85. The high performance of APE‐PPI‐based devices suggests that the t‐APE and PI combination can potentially be used to synthesize efficient electroluminescent materials for WOLEDs.     

A Bipolar and Small Singlet‐Triplet Splitting Energy Host with Triplet Energy Lower Than a Blue Phosphor for Phosphorescent OLEDs in Panchromatic Range

A bipolar host material, 2,4,6‐tris(3‐(carbazol‐9‐yl)phenyl)‐triazine (TCPZ), was synthesized according to reported method. Due to the higher triplet energy compared to green and red phosphors, TCPZ is suitable to host them in phosphorescent organic light‐emitting diodes (PhOLEDs). Although the triplet of TCPZ is slightly lower than a common blue phosphor, good blue PhOLEDs using TCPZ as the host were successfully demonstrated in this work. By low temperature emission measurement, it was found that the energy splitting between the singlet and triplet of TCPZ is as small as 0.24 eV. Therefore, thermal activated energy transfer from triplet to singlet in the host TCPZ is expected to occur, which can be afterwards efficiently transferred to the blue phosphor, hence enabling it to host blue phosphor. As a result, TCPZ can be used as host for phosphors in panchromatic range. Additionally, single‐carrier devices clearly prove its good bipolar transport feature, beneficial to device performance. By using TCPZ as a host, high performance deep‐red, green and blue PhOLEDs have been achieved, with maximum efficiencies of 9.3 cd·A^?1 (13.2%), 81.3 cd·A^?1 (23.1%) and 17.03 cd·A^?1 (10.4%), respectively.     

Efficient Nondoped Pure Blue Organic Light‐Emitting Diodes Based on an Anthracene and 9,9‐Diphenyl‐9,10‐dihydroacridine Derivative

Organic light‐emitting diodes (OLEDs) have been greatly developed in recent years owing to their abundant advantages for full‐color displays and general‐purpose lightings. Blue emitters not only provide one of the primary colors of the RGB (red, green and blue) display system to reduce the power consumption of OLEDs, but are able able to generate light of all colors, including blue, green, red, and white by energy transfer processes in devices. However, it remains a challenge to achieve high‐performance blue electroluminescence, especially for nondoped devices. In this paper, we report a blue light emitting molecule, DPAC‐AnPCN, which consists of 9,9‐diphenyl‐9,10‐dihydroacridine and p‐benzonitrile substituted anthracene moieties. The asymmetrically decoration on anthracene with different groups on its 9 and 10 positions combines the merits of the respective constructing units and endows DPAC‐AnPCN with pure blue emission, high solid‐state efficiency, good thermal stability and appropriate HOMO and LUMO energy levels. Furthermore, DPAC‐AnPCN can be applied in a nondoped device to effectively reduce the fabrication complexity and cost. The nondoped device exhibits pure blue electroluminescence (EL) locating at 464 nm with CIE coordinates of (0.15, 0.15). Moreover, it maintains high efficiency at relatively high luminescence. The maximum external quantum efficiency (EQE) reaches 6.04 % and still remains 5.31 % at the luminance of 1000 cd m^?2 showing a very small efficiency roll‐off.     

Judicious Choice of N‐Heterocycles for the Realization of Sky‐Blue‐ to Green‐Emitting Carbazolylgold(III) C^C^N Complexes and Their Applications for Organic Light‐Emitting Devices

A new class of sky‐blue‐ to green‐emitting carbazolylgold(III) C^C^N complexes containing pyrazole or benzimidazole moieties has been successfully designed and synthesized. Through the judicious choice of the N‐heterocycles in the cyclometalating ligand and the tailor‐made carbazole moieties, maximum photoluminescence quantum yields of 0.52 and 0.39 have been realized in the green‐ and sky‐blue‐emitting complexes, respectively. Solution‐processed and vacuum‐deposited organic light‐emitting devices (OLEDs) based on the benzimidazole‐containing complexes have been prepared. The sky‐blue‐emitting device shows an emission peaking at 484 nm with a narrow full‐width at half‐maximum of 57 nm (2244 cm^?1), demonstrating the potential of this class of complexes in the application of OLEDs with high color purity. In addition, high maximum external quantum efficiencies of 12.3 % and a long operational half‐lifetime of over 5300 h at 100 cd m^?2 have been achieved in the vacuum‐deposited green‐emitting devices.     

Chromophore‐labeled dendrimers for use in single‐layer light‐emitting diodes

Two novel chromophore‐labeled dendrimers are presented and their incorporation into two‐component, single layer organic light emitting diodes (OLEDs) is described. The photoluminescence (PL) spectra, both in solution and in the solid state, demonstrate that Forster energy transfer from the donor chromophores on the dendrimers periphery to the acceptors located at the core is highly efficient, and affords emission exclusively from the core dyes, either coumarin 343 or a benzene‐capped pentathiophene. When these dendrimers are doped into single layer OLEDs, the electroluminescence (EL) is nearly identical to the photoluminescence described above, indicating once again exclusive emission from the core chromophores.     

Highly Efficient Nondoped OLEDs with Negligible Efficiency Roll‐Off Fabricated from Aggregation‐Induced Delayed Fluorescence Luminogens

Purely organic emitters that can efficiently utilize triplet excitons are highly desired to cut the cost of organic light‐emitting diodes (OLEDs), but most of them require complicated doping techniques for their fabrication and suffer from severe efficiency roll‐off. Herein, we developed novel luminogens with weak emission and negligible delayed fluorescence in solution but strong emission with prominent delayed components upon aggregate formation, giving rise to aggregation‐induced delayed fluorescence (AIDF). The concentration‐caused emission quenching and exciton annihilation are well‐suppressed, which leads to high emission efficiencies and efficient exciton utilization in neat films. Their nondoped OLEDs provide excellent electroluminescence efficiencies of 59.1 cd A⁻¹, 65.7 lm W⁻¹, and 18.4 %, and a negligible current efficiency roll‐off of 1.2 % at 1000 cd m⁻². Exploring AIDF luminogens for the construction of nondoped OLEDs could be a promising strategy to advance device efficiency and stability.     

Synthesis and characterization of indeno[1,2‐b]fluorene‐based white light‐emitting copolymer

An indenofluorene‐based copolymer containing blue‐, green‐, and red light‐emitting moieties was synthesized by Suzuki polymerization and examined for application in white organic light‐emitting diodes (WOLEDs). Tetraoctylindenofluorene (IF), 2,1,3‐benzothiadiazole (BT), and 4,7‐bis(2‐thienyl)‐2,1,3‐benzothiadiazole (DBT) derivatives were used as the blue‐, green‐, and red‐light emitting structures, respectively. The number‐average molecular weight of the polymer was determined to be 25,900 g/mol with a polydispersity index of 2.02. The polymer was thermally stable (T_d = ～398 °C) and quite soluble in common organic solvents, forming an optical‐quality film by spin casting. The EL characteristics were fine‐tuned from the single copolymer through incomplete fluorescence energy transfer by adjusting the composition of the red/green/blue units in the copolymer. The EL device using the indenofluorene‐based copolymer containing 0.01 mol % BT and 0.02 mol % DBT units ( PIF‐BT01‐DBT02 ) showed a maximum brightness of 4088 cd/m² at 8 V and a maximum current efficiency of 0.36 cd/A with Commission Internationale de L'Eclairage (CIE) coordinates of (0.34, 0.32). The EL emission of PIF‐BT01‐DBT02 was stable with respect to changes in voltage. The color emitted was dependent on the thickness of the active polymer layer; layer (～60 nm) too thin was unsuitable for realizing WOLED via energy transfer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3467–3479, 2009     

A Novel Spiro[acridine‐9,9′‐fluorene] Derivatives Containing Phenanthroimidazole Moiety for Deep‐Blue OLED Application

Typical π–π stacking and aggregation‐caused quenching could be suppressed in the film‐state by the spiro conformation molecular design in the field of organic light‐emitting diodes (OLEDs). Herein, a novel deep‐blue fluorescent material with spiro conformation, 1‐(4‐(tert ‐butyl)phenyl)‐2‐(4‐(10‐phenyl‐10H ‐spiro[acridine‐9,9′‐fluoren]‐2‐yl)phenyl)‐1H ‐phenanthro[9,10‐d ]imidazole ( SAF‐BPI ), was designed and synthesized. The compound consists of spiro‐acridine‐fluorene (SAF) as donor part and phenanthroimidazole (BPI) as acceptor part. Owing to the rigid SAF skeleton, this compound exhibits a high thermal stability with a glass transition temperature (T _g) of 198 °C. The compound exhibits bipolar transporting characteristics demonstrated by the single‐carrier devices. The non‐doped OLEDs based on the SAF‐BPI as the emitting layer shows maximum emission at 448 nm, maximum luminance of 2122 cd m⁻², maximum current efficiency (CE) of 3.97 cd A⁻¹, and a maximum power efficiency of 2.08 lm W⁻¹. The chromaticity coordinate is stable at (0.15, 0.10) at the voltage of 7–11 V. The device shows a slow efficiency roll‐off with CE of 3.35 and 2.85 cd A⁻¹ at 100 and 1000 cd m⁻², respectively.     

Non‐Doped Sky‐Blue OLEDs Based on Simple Structured AIE Emitters with High Efficiencies at Low Driven Voltages

Blue organic light‐emitting diodes (OLEDs) are necessary for flat‐panel display technologies and lighting applications. To make more energy‐saving, low‐cost and long‐lasting OLEDs, efficient materials as well as simple structured devices are in high demand. However, a very limited number of blue OLEDs achieving high stability and color purity have been reported. Herein, three new sky‐blue emitters, 1,4,5‐triphenyl‐2‐(4‐(1,2,2‐triphenylvinyl)phenyl)‐1H‐imidazole (TPEI), 1‐(4‐methoxyphenyl)‐4,5‐diphenyl‐2‐(4‐(1,2,2‐triphenylvinyl)phenyl)‐1H‐imidazole (TPEMeOPhI) and 1‐phenyl‐2,4,5‐tris(4‐(1,2,2‐triphenylvinyl)phenyl)‐1H‐imidazole (3TPEI), with a combination of imidazole and tetraphenylethene groups, have been developed. High photoluminescence quantum yields are obtained for these materials. All derivatives have demonstrated aggregation‐induced emission (AIE) behavior, excellent thermal stability with high decomposition and glass transition temperatures. Non‐doped sky‐blue OLEDs with simple structure have been fabricated employing these materials as emitters and realized high efficiencies of 2.41 % (4.92 cd A⁻¹, 2.70 lm W⁻¹), 2.16 (4.33 cd A⁻¹, 2.59 lm W⁻¹) and 3.13 % (6.97 cd A⁻¹, 4.74 lm W⁻¹) for TPEI, TPEMeOPhI and 3TPEI, with small efficiency roll‐off. These are among excellent results for molecules constructed from the combination of imidazole and TPE reported so far. The high performance of a 3TPEI‐based device shows the promising potential of the combination of imidazole and AIEgen for synthesizing efficient electroluminescent materials for OLED devices.     

Synthesis of new polyfluorene copolymers with a comonomer containing triphenylamine units and their applications in white‐light‐emitting diodes

Novel conjugated polyfluorene copolymers, poly[9,9‐dihexylfluorene‐2,7‐diyl‐co‐(2,5‐bis(4′‐diphenylaminostyryl)‐phenylene‐1,4‐diyl)]s (PGs), have been synthesized by nickel(0)‐mediated polymerization from 2,7‐dibromo‐9,9‐dihexylfluorene and 1,4′‐dibromo‐2,5‐bis(4‐diphenylaminostyryl)benzene with various molar ratios of the monomers. Because of the incorporation of triphenylamine (TPA) moieties, PGs exhibit much higher HOMO levels than the corresponding polyfluorene homopolymers and are able to facilitate hole injection into the polymer layer from the anode electrode in light‐emitting diodes. Conventional polymeric light‐emitting devices with the configuration ITO/PEDOT:PSS/polymer/Ca/Al have been fabricated. A light‐emitting device produced with one of the PG copolymers (PG10) as the emitting layer exhibited a voltage‐independent and stable bluish‐green emission with color coordinates of (0.22, 0.42) at 5 V. The maximum brightness and current efficiency of the PG10 device were 3370 cd/m² (at 9.6 V) and 0.6 cd/A, respectively. To realize a white polymeric light‐emitting diode, PG10 as the host material was blended with 1.0 wt % of a red‐light‐emitting polymer, poly[9,9‐dioctylfluorene‐2,7‐diyl‐alt‐2,5‐bis(2‐thienyl‐2‐cyanovinyl)‐1‐(2′‐ethylhexyloxy)‐4‐methoxybenzene‐5′,5′‐diyl] (PFR4‐S), and poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylenevinylene] (MEH‐PPV). The device based on PG10:PFR4‐S showed an almost perfect pure white electroluminescence emission, with Commission Internationale de l'Eclairage (CIE) coordinates of (0.33, 0.36) at 8 V; for the PG10:MEH‐PPV device, the CIE coordinates at this voltage were (0.30, 0.40) with a maximum brightness of 1930 cd/m². Moreover, the white‐light emission from the PG10:PFR4‐S device was stable even at different driving voltages and had CIE coordinates of (0.34, 0.36) at 6 V and (0.31, 0.35) at 10 V. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1199–1209, 2007     

Pure white‐light‐emitting diodes from phosphorescent single polymer systems

New white polymeric light‐emitting diodes from phosphorescent single polymer systems have been developed using a blue‐light‐emitting fluorene monomer copolymerized with a red‐light‐emitting phosphorescent dye, and end‐capped with a green‐light‐emission dye. All of the copolymers have good thermal stability with 5% weight loss temperatures at 380–413 °C and glass transition temperatures at 75–137 °C. We obtained white‐light‐emission devices by adjusting the molar ratio of the comonomers with a structure of indium tin oxide/poly(3,4‐ethylenedioxythiophene): poly(styrene sulfonic acid)/polyvinylcarbazole (PVK)/emission layer/Ca/Ag. The highest brightness in such a device configuration is 300 cd/m² at a current density of 2900 A/m² with high white color quality (Commission Internationale de l'Eclairage (CIE) coordinates of (0.33, 0.34)). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 464–472, 2008     

A New Approach to Prepare Efficient Blue AIE Emitters for Undoped OLEDs

Two aggregation‐induced emission active luminogens (TPE–pTPA and TPE–mTPA) were successfully synthesized. For comparison, another six similar compounds were prepared. Because of the introduced hole‐dominated triphenylamine (TPA), fluorene groups with high luminous efficiency, and unconjugated linkages, the π conjugation length of the obtained luminogens is effectively restricted to ensure their blue emission. The undoped organic light‐emitting diodes based on TPE–pTPA and TPE–mTPA exhibited blue or deep‐blue emissions, low turn‐on voltages (3 V), and high electroluminescence efficiencies with L_max, η_C,max, and η_P,max values of up to 26 697 cd m^?2, 3.37 cd A^?1, and 2.40 Lm W^?1.     

Achieving Solution-Processed Non-Doped Single-Emitting-Layer White Organic Light-Emitting Diodes through Adjusting Pyrene-Based Polyaromatic Hydrocarbon

Single-emitting-layer white organic light-emitting diodes (SEL-WOLEDs) have developed rapidly in recent years due to the outstanding advantages of high efficiency, simple device structure, low cost, less phase separation, and stable emission color. Nevertheless, the relatively complicated host-dopant system is usually essential for most previous SEL-WOLEDs and the development of simple non-doped SEL-WOLEDs lags behind. Hence the straightforward synthesis of single-white-emitting molecules for non-doped SEL-WOLEDs still remains a great challengeable task. In this article, we designed and synthesized two new pyrene-based polyaromatic hydrocarbons (PAHs) and used them as emitting layer materials in the OLED devices. When the molecules change from the mono-fused one to bis-fused one, the emitting light changes from greenish to white color. Further study indicated that the bis-fused molecule PyD with more twisted and extended backbone packed in neat Cmca space group in single-crystal system compared with P2₁/n for PyS, which may be favorable to form excimers in the solid state and broaden the emission spectrum in the OLEDs. As a result, a solution-processed non-doped single-white-emitting-molecule SEL-WOLED with high performance (e. g., a high color rendering index of 66) is reported. The findings will be beneficial not only to further development of simple WOLEDs, but also to other related organic optoelectronic technology.     

Aggregation‐Induced Delayed Fluorescence Luminogens for Efficient Organic Light‐Emitting Diodes

Aggregation‐induced delayed fluorescence (AIDF) can be regarded as a special case of aggregation‐induced emission (AIE). Luminogens with AIDF can simultaneously emit strongly in solid state and fully utilize the singlet and triplet excitons in organic light‐emitting diodes (OLEDs). In this work, two new AIDF luminogens, DMF‐BP‐DMAC and DPF‐BP‐DMAC, with an asymmetric D–A–D′ structure, are designed and synthesized. The characteristics of both luminogens are systematically investigated, including single crystal structures, theoretical calculations, photophysical properties and thermal stabilities. Inspired by their AIDF nature, the green‐emission non‐doped OLEDs based on them are fabricated, which afford good electroluminescence performances, with low turn‐on voltages of 2.8 V, high luminance of 52560 cd m^?2, high efficiencies of up to 14.4 %, 42.3 cd A^?1 and 30.2 lm W^?1, and very small efficiency roll‐off. The results strongly indicate the bright future of non‐doped OLEDs on the basis of robust AIDF luminogens.     

High‐Performance Blue OLEDs Based on Phenanthroimidazole Emitters via Substitutions at the C6‐ and C9‐Positions for Improving Exciton Utilization

Donor–acceptor (D–A) molecular architecture has been shown to be an effective strategy for obtaining high‐performance electroluminescent materials. In this work, two D–A molecules, Ph‐BPA‐BPI and Py‐BPA‐BPI, have been synthesized by attaching highly fluorescent phenanthrene or pyrene groups to the C6‐ and C9‐positions of a locally excited‐state emitting phenylamine–phenanthroimidazole moiety. Equipped with good physical and hybridized local and charge‐transfer properties, both molecules show high performances as blue emitters in nondoped organic light‐emitting devices (OLEDs). An OLED using Ph‐BPA‐BPI as the emitting layer exhibits deep‐blue emission with CIE coordinates of (0.15, 0.08), and a maximum external quantum efficiency (EQE), current efficiency (CE), and power efficiency (PE) of 4.56 %, 3.60 cd A^?1, and 3.66 lm W^?1, respectively. On the other hand, a Py‐BPA‐BPI‐based, sky‐blue OLED delivers the best results among nondoped OLEDs with CIE_y values of < 0.3 reported so far, for which a very low turn‐on voltage of 2.15 V, CIE coordinates of (0.17, 0.29), and maximum CE, PE, and EQE values of 10.9 cd A^?1, 10.5 lm W^?1, and 5.64 %, were achieved, respectively. More importantly, both devices show little or even no efficiency roll‐off and high singlet exciton‐utilizing efficiencies of 36.2 % for Ph‐BPA‐BPI and 39.2 % for Py‐BPA‐BPI.     

High‐Performance Non‐doped OLEDs with Nearly 100 % Exciton Use and Negligible Efficiency Roll‐Off

Non‐doped organic light‐emitting diodes (OLEDs) possess merits of higher stability and easier fabrication than doped devices. However, luminescent materials with high exciton use are generally unsuitable for non‐doped OLEDs because of severe emission quenching and exciton annihilation in neat films. Herein, we wish to report a novel molecular design of integrating aggregation‐induced delayed fluorescence (AIDF) moiety within host materials to explore efficient luminogens for non‐doped OLEDs. By grafting 4‐(phenoxazin‐10‐yl)benzoyl to common host materials, we develop a series of new luminescent materials with prominent AIDF property. Their neat films fluoresce strongly and can fully harvest both singlet and triplet excitons with suppressed exciton annihilation. Non‐doped OLEDs of these AIDF luminogens exhibit excellent luminance (ca. 100000 cd m^?2), outstanding external quantum efficiencies (21.4–22.6 %), negligible efficiency roll‐off and improved operational stability. To the best of our knowledge, these are the most efficient non‐doped OLEDs reported so far. This convenient and versatile molecular design is of high significance for the advance of non‐doped OLEDs.     

Highlights on the Road towards Highly Emitting Solid‐State Luminophores: Two Classes of Thiazole‐Based Organoboron Fluorophores with the AIEE/AIE Effect

Developing a novel, small‐sized molecular building block that may be capable of emitting light in the solid state is a challenging task and has rarely been reported in the literature. BF₂‐containing dyes seem to be promising candidates towards this aim. Two series of new N^NBF₂ complexes showing aggregation‐induced emission (AIE) and aggregation‐induced emission enhancement (AIEE) were designed and synthesized by means of a new protocol, which improved on the traditional method by employing microwave irradiation. The optical and photophysical properties of the BF₂ complexes were investigated in depth. The synthesized complexes showed fluorescence in both solution and the solid state and, in a mixture of tetrahydrofuran/water, may aggregate into fluorescent nanoparticles. The experimental investigation was supported by quantum mechanical calculations. Their availability, stability, large Stokes shifts, and aggregation capabilities, along with their solid‐state emission capability, render this new class of BF₂ complexes promising AIEE/AIE fluorophores for further applications in the fields of fluorescence imaging and materials science.     

Dinitriles Bearing AIE‐Active Moieties: Synthesis,E/Z Isomerization,and Fluorescence Properties

Dinitriles bearing aggregation‐induced emission (AIE)‐active moieties [tetraphenylethylene (TPE) or diphenylphenanthrene (DPP)] were prepared. Compounds 4 (TPE‐linked) and 8 (DPP‐linked) showed considerably redshifted emission resulting from their large Stokes shifts and also strong fluorescence in the aggregated and solid states. Pure E and Z stereoisomers of both dinitriles were easily separated, and their isomerization equilibria and fluorescence properties were investigated. In addition to their pronounced AIEE behavior, 4 and 8 also showed various reversible chromic responses to external stimuli, namely, solvato‐, piezo‐, vapo‐, and thermochromism, which make them potential candidates for smart materials.