新型室温酯化法接枝聚合物改性SiO_2纳米微粒

提出了一种在室温、大气环境等温和条件下通过酯化反应将端羧基聚合物链接枝到纳米SiO2微球表面从而制备有机/无机复合纳米微粒的新方法.该方法通过以下两个步骤得以实现,即第一,用3-环氧丙基三甲氧基硅烷对纳米SiO2微球表面进行改性处理,接着将引入到纳米SiO2表面的环氧基团转化为烷羟基基团;第二,通过引入到纳米SiO2微球表面的烷羟基与聚合物中的端羧基在室温下发生酯化反应,从而将聚合物接枝到纳米SiO2表面制得复合微球.利用XPS、FTIR、TEM和TGA等测试手段对纳米SiO2的改性过程以及聚合物接枝后得到的复合微球进行了表征.研究结果表明,该室温酯化接枝方法具有较高的接枝率,接枝到无机纳米微粒表面的聚合物占复合微球质量的55wt%～70wt%;接枝聚合物后,纳米SiO2微球的粒径从40nm增加到64～75nm,从而得到了以SiO2为核、以聚合物为壳的有机-无机复合微球.     

SiO_2纳米粒子对PMMA/PS共混物共连续相结构退火粗化过程的影响

考察了亲水性纳米SiO2粒子的加入对聚甲基丙烯酸甲酯/聚苯乙烯(PMMA/PS)共混体系的共连续相结构在静态高温退火时形态稳定性的影响,发现静态高温退火条件下,填充体系共连续组成范围变窄幅度较小、特征结构尺寸的粗化速率减慢.流变测试表明纳米SiO2粒子加入之后PMMA/PS共混体系的黏弹性显著提高,从而能减缓破坏构成共连续相结构的纤维断裂或回缩等松弛过程的速率,有效地抑制PMMA/PS共混体系的共连续相结构粗化进程,提高相结构的稳定性.根据现有的两种粗化理论的定性分析表明,在高填充量的共混体系中,加入纳米SiO2粒子导致共混体系的黏弹性的显著改变是影响PMMA/PS共混体系在静态高温退火时共连续相结构粗化速率的主要因素,相对而言界面张力的变化对共连续相结构在静态高温退火时的粗化速率影响则应该较小.     

Dispersion stability and rheological behavior of suspensions of polystyrene coated fumed silica particles in polystyrene solutions

Polystyrene coated silica（SiO₂@PS） core-shell composite particles with averaged diameter of about 290 nm were prepared by in situ emulsion polymerization of styrene on the surface ofγ-methacryloxypropyltrimethoxysilane grafted SiO₂ nanoparticles of 20-50 nm in diameter.Rheological behavior and dispersion stability of SiO₂@PS suspension in 10 wt%PS solution were compared with suspensions of untreated SiO₂ and silane modified SiO₂ nanoparticles.Suspensions of the untreated and the silane modified SiO₂ exhibited obvious shear thinning.The SiO-2@PS suspension exhibits shear viscosity considerably smaller than suspensions of untreated and silane modified SiO₂ at low shear rates.Transmission electron microscopy showed that the composite particles can uniformly and stably disperse in PS solution compared to other suspensions,implying that the PS shell can effectively enhance the particle compatibility with PS macromolecules in solution.     

Synthesis and properties of silica/polystyrene/polyaniline conductive composite particles

In this study, silica/polystyrene/polyaniline (SiO₂/PS/PANI) conductive composite particles were synthesized by four sequential reactions. The nanosized SiO₂ particles were synthesized from tetraethoxysilane (TEOS) by a sol–gel process with water as the solvent medium, followed by a surface modification with triethoxyvinylsilane; then the surface modified SiO₂ particles were used as seeds to synthesize SiO₂/PS composite particles with soapless seeded emulsion polymerization. Finally, the SiO₂/PS particles were used as seeds to synthesize the SiO₂/PS/PANI conductive composite particles. The sol–gel process of SiO₂, the effect of surface modification, and several other factors that influenced polymerization of styrene in the soapless seeded emulsion polymerization will be discussed. Either potassium persulfate (KPS) or 2,2′‐azobis(isobutyramidine) dihydrochloride (AIBA) was used as the initiator to synthesize the uniform SiO₂/PS particles successfully, and the cross‐section morphology of the SiO₂/PS particles was found to be of a core–shell structure, with SiO₂ as the core, and PS as the shell. The SiO₂/PS particles were well dispersed in many organic solvents. In the following step to synthesize SiO₂/PS/PANI conductive composite particles, sodium dodecyl sulfate (SDS) played an important role, specifically, to absorb aniline onto the surfaces of the SiO₂/PS particles to carry out the polymerization of aniline over the entire surface of the particles. The conductivity of the SiO₂/PS/PANI composite particles approached that of semiconductive materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 342–354, 2005     

Synthesis of aqueous CdTe quantum dots embedded silica nanoparticles and their applications as fluorescence probes

This paper presents the synthesis of aqueous CdTe QDs embedded silica nanoparticles by reverse microemulsion method and their applications as fluorescence probes in bioassay and cell imaging. With the aim of embedding more CdTe QDs in silica spheres, we use poly(dimethyldiallyl ammonium chloride) to balance the electrostatic repulsion between CdTe QDs and silica intermediates. By modifying the surface of CdTe/SiO₂ composite nanoparticles with amino and methylphosphonate groups, biologically functionalized and monodisperse CdTe/SiO₂ composite nanoparticles can be obtained. In this work, CdTe/SiO₂ composite nanoparticles are conjugated with biotin-labeled mouse IgG via covalent binding. The biotin-labeled mouse IgG on the CdTe/SiO₂ composite nanoparticles surface can recognize FITC-labeled avidin and avidin on the surface of polystyrene microspheres by protein-protein binding. Finally, the CdTe/SiO₂ composite nanoparticles with secondary antibody are used to label the MG63 osteosarcoma cell with primary antibody successfully, which demonstrates that the application of CdTe/SiO₂ composite nanoparticles as fluorescent probes in bioassay and fluorescence imaging is feasible.     

Enzyme biosensor based on the immobilization of HRP on SiO<Subscript>2</Subscript>/BSA/Au composite nanoparticles

In this work, an enzyme biosensor based on the immobilization of horseradish peroxidase (HRP) on SiO₂/BSA/Au/thionine/nafion-modified gold electrode was fabricated successfully. Firstly, nafion was dropped on the surface of the gold electrode to form a nafion film followed by chemisorption of thionine (Thi) as an electron mediator via the ion-exchange interaction between the Thi and nafion. Subsequently, the SiO₂/BSA/Au composite nanoparticles were assembled onto Thi film through the covalent bounding with the amino groups of Thi. Finally, HRP was immobilized on the SiO₂/BSA/Au composite nanoparticles due to the covalent conjugation to construct an enzyme biosensor. The surface topographies of the SiO₂/BSA/Au composite nanoparticles were investigated by using scanning electronic microscopy. The stepwise self-assemble procedure of the biosensor was further characterized by means of cyclic voltammetry and chronoamperometry. The enzyme biosensor showed high sensitivity, good stability and selectivity, a wide linear response to hydrogen peroxide (H₂O₂) in the range of 8.0 × 10^-6 ∼ 3.72 × 10^-3 mol/L, with a detection limit of 2.0 × 10^-6 mol/L. The Michaelies-Menten constant K_M^app K_M^{app} value was estimated to be 2.3 mM.     

Titanium dioxide/poly(methyl methacrylate) composite microspheres prepared by in situ suspension polymerization and their ability to protect against UV rays

Homogenously dispersed TiO₂/poly(methyl methacrylate) (PMMA) composite microspheres were produced in the size range of 1-10µm and the interfacial characteristics of TiO₂ and PMMA in suspension polymerization were considered. In electron microscopy observation, it was found that TiO₂ nanoparticles were embedded homogeneously in the PMMA phase. This study elucidates that the interfacial compatibility between TiO₂ and PMMA played a decisive role in producing the composite microspheres structured with inner TiO₂ and continuous PMMA, which was achieved by treating the surface of the TiO₂ particles hydrophobically. The TiO₂/PMMA composite microspheres produced showed good ability to protect against UV rays and are therefore of great usefulness in cosmetic formulations.     

Fabrication and characterization of TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript> composite nanoparticles and polyurethane/(TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript>) nanocomposite films

TiO₂–SiO₂ composite nanoparticles were prepared by a sol–gel process. To obtain the assembly of TiO₂–SiO₂ composite nanoparticles, different molar ratios of Ti/Si were investigated. Polyurethane (PU)/(TiO₂–SiO₂) hybrid films were synthesized using the “grafting from” technique by incorporation of modified TiO₂–SiO₂ composite nanoparticles building blocks into PU matrix. Firstly, 3-aminopropyltriethysilane was employed to encapsulate TiO₂–SiO₂ composite nanoparticles’ surface. Secondly, the PU shell was tethered to the TiO₂–SiO₂ core surface via surface functionalized reaction. The particle size of TiO₂–SiO₂ composite sol was performed on dynamic light scattering, and the microstructure was characterized by X-ray diffraction and Fourier transform infrared. Thermogravimetric analysis and transmission electron microscopy (TEM) employed to study the hybrid films. The average particle size of the TiO₂–SiO₂ composite particles is about 38 nm when the molar ratio of Ti/Si reaches to1:1. The TEM image indicates that TiO₂–SiO₂ composite nanoparticles are well dispersed in the PU matrix.     

Preparation of monodisperse polystyrene/silver composite microspheres and their catalytic properties

This article presents a facile method for the preparation of polystyrene/silver (PS/Ag) composite microspheres. In this approach, monodisperse PS spheres were synthesized via dispersion polymerization and modified by sulfonation to obtain sulfonated PS spheres with sulfonic acid groups on the surfaces, and then adsorbed Sn²⁺ ions by electrostatic interaction and used as templates. PS/Ag composite microspheres were prepared successively by addition of [Ag(NH₃)₂]⁺ complex ions to the templates dispersion, adsorbing to the surfaces of templates, and then reduction of [Ag(NH₃)₂]⁺ complex ions to Ag nanoparticles by sodium potassium tartrate. The results showed that monodisperse PS spheres with sulfonic acid groups on the surfaces were coated by an incomplete and nonuniform coverage of Ag nanoparticles in the absence of Sn²⁺ ions. In the presence of Sn²⁺ ions, however, complete and uniform Ag nanoparticles coatings were obtained on the entire PS sphere. And the deposition density and size of Ag nanoparticles can be controlled by [Ag(NH₃)₂]⁺ concentration. The resulting PS/Ag composite microspheres were characterized by SEM, TEM, XRD, TGA, and UV-vis. Preliminary catalytical tests indicated these PS/Ag composite microspheres showed good catalytic properties.     

SYNTHESIS OF POLYSTYRENE/TiO2 CORE-SHELL MATERIAL

 TiO₂-coated polystyrene nanoparticles were prepared in a simple way. First, functional PS particles were synthesized by copolymerizing one kind of polymerizable surfactant with styrene. Then the stable dispersions of polystyrene nanoparticles were used as templates, and polystyrene nanoparticles were coated with titania by in situ hydrolysis of tetra-n-butyl titanate (TBT). No surface treatment and centrifugation/redispersion cycle process were needed during the whole experiment. Isolated PS spheres with uniform coatings of titania were obtained when water concentration was lower than a certain level.     

帽状锑纳米粒子的制备及表面等离子共振特性的研究

采用热蒸发法在SiO₂自组装单层膜上制备了帽状锑纳米粒子,通过扫描电镜(SEM)、原子力显微镜(AFM)、X射线衍射仪(XRD)和紫外-可见-近红外(UV-Vis-NIR)分光光度计对帽状复合纳米粒子的表面形貌、结构以及表面等离子共振特性进行了研究和表征。结果表明,制备的复合纳米粒子呈帽状,表面等离子共振峰具有明显的可调谐性,当二氧化硅粒径增大或锑帽层厚度增加时,等离子共振吸收峰位置红移。     

具有双亲特性的水相哑铃型SiO2纳米粒子的制备

以纳米SiO2水溶胶为原料,3?氨丙基三乙氧基硅烷(APTES)和3?氯丙基三乙氧基硅烷(CPTES)为改性剂,在水基环境下分别对SiO2纳米粒子进行改性,得到了具有亲水特性的APTES改性SiO2粒子和具有亲油特性的CPTES改性SiO2粒子水溶胶。2种粒子按不同比例混合,利用接枝在SiO2粒子表面氨基和氯丙基的取代反应,使得2种具有亲水/亲油特性的改性SiO2纳米粒子偶联,制备了粒径为40~50 nm的哑铃型SiO2纳米粒子。并通过透射电镜(TEM)、傅里叶变换红外光谱(FT?IR)、X射线光电子能谱(XPS)以及动态光散射(DLS)等方法对其进行了系统表征。结果表明,2种粒子成功偶联形成了具有哑铃型结构的水相SiO2纳米粒子,该粒子两面具有不同的亲水性,粒径近似等于APTES改性SiO2粒子和CPTES改性SiO2粒子的粒径之和。     

Synthesis and Polymerization Kinetics of Polystyrene Grafting using Azo-groups Bounded SiO2 as an Initiator

This work presents a new method for synthesis of inorganic/organic hybrid nanoparticles via the in-situ polymerization by the use of the azo-groups bounded silica nanoparticles as a radical initiator and styrene as a model vinyl-monomer. The synthesis and the structure of silica/polystyrene (SiO₂/PS), and the polymerization kinetics of the styrene initiated by the azo-groups bounded SiO₂ nanoparticles are studied with techniques such as FTIR, XPS, DSC, GPC, and TEM. Results show that the SiO₂-g-PS nanoparticles are synthesized successfully, and the resulting hybrid nanoparticles have a core-shell structure with SiO₂ in the core and the polystyrene on the outside layer. The percentage of the grafted PS on the SiO₂ surface increases with the progress of the polymerization before 6 h, and the largest amount of the grafted PS reaches 33% of the silica nanoparticles.

Consequently, the size of the nanoparticles increases ca. 20 nm upon the polystyrene grafting. The molecular weight of the grafted PS increases with the polymerization, and it has reached a much large value in the first several polymerization hours while it keeps a constant value approximately in the following polymerization process. Meanwhile, the polydispersity index of the grafted PS gradually increases with the progress of the polymerization. These phenomena agree with the theory of the traditional free radical polymerization very well.     

Synthesis of CdS/SiO2/polymer tri-layer fluorescent nanospheres with functional polymer shells

Tri-layer CdS/SiO₂/polymer hybrid nanospheres were synthesized by distillation precipitation polymerization of either ethyleneglycol dimethacrylate（EGDMA） or EGDMA together with comonomers having different functional groups, such as methacrylic acid,4-vinylpyridine and 2-hydroxyethylmethacrylate,in the presence of 3-（methacryloxy）propyl trimefhoxysilane（MPS）-modified CdS/SiO₂ nanoparticles as seeds in acetonitrile with 2,2’-azobisisobutyronitrile（AIBN） as initiator.In this approach,MPS-modified inorganic seeds were prepared by the modification of CdS/SiO₂ nanoparticles via the self-condensation reaction between the hydroxyl groups of sinaols,in which the CdS/SiO-2 nanoparticles were afforded by a reverse microemulsion technique for the synthesis of CdS core nanoparticles with the subsequent coating of silica layer. The polymer shell-layers encapsulated over the MPS-modified CdS/SiO₂ inorganic seeds via the efficient capture of the monomers and oligomers from the solution with the aid of the vinyl groups incorporated by the MPS modification,in which the polymer shell-thickness and functional groups including carboxyl,pyridyl and hydroxyl,were facilely controlled by the feed of EGDMA as well as the types of comonomers used for the polymerization.These nanospheres were characterized by transmission electron microscopy（TEM）,Fourier-transform infrared spectroscopy（FT-IR）,thermogravimetric analysis （TGA）,fluorescence spectroscopy and zeta potential.     

Preparation and electrorheological characteristic of CdS/Polystyrene composite particles

Cadmium sulfide/polystyrene (CdS/PS) hybrid particles were synthesized and their physical characteristics including electrorheology were examined. Monodisperse CdS/PS nanocomposite particles with diameters of 2 μm were obtained via dispersion polymerization. To form cadmium sulfide nanoparticles onto the PS surface, 2-(dimethylamino)ethyl methacrylate was used as a functional monomer for coordinating with Cd²⁺ ions. Finally, cadmium sulfide nanoparticles with size < 10 nm were formed with the release of S²⁻ ions from thioacetamide. The morphology of the as-prepared CdS/PS nanocomposite particles clearly showed that the CdS particles are present on the surface of the PS. The optical properties were also studied. In addition, their electrorheological characteristics were confirmed by using optical microscopy with applied electrical field. Recently, dielectric properties of CdS nanoparticles were already reported; however, electrorheological characteristics of CdS/PS nanocomposite particles were investigated for the first time.     

Preparation of a novel polymeric fluorescent nanoparticle

A new type of narrowly dispersed fluorescent crosslinked polystyrene (PS) nanoparticles (20-50 nm) was synthesized via a modified microemulsion copolymerization of styrene, crosslinker divinyl benzene (DVB) and a hydrophilic comonomer amino ethyl methacrylate hydrochloride (AEMH), in the presence of pyrene. Characterized by steady-state fluorescence spectra, these nanoparticles show high luminescent intensity and the embedded pyrene has a negligible desorption from the nanoparticles. The emission intensity I₁ of the pyrene in the crosslinked nanoparticles is 40 times higher than that of pyrene in toluene or styrene solution with the same concentration. The fluorescence emission intensity can be varied by the amount of the monomer, crosslinker and pyrene, but is influenced little by the amount of AEMH in the range of investigation. The surface of the nanoparticles is modified by amino and amidino functional groups introduced by the comonomer and the initiator 2, 2'-azobis(2-amidinopropane) dihydrochloride (V₅₀), which controls the zeta potential on the particle surface.     

Anionic surfactant for silica-coated polystyrene composite microspheres prepared with miniemulsion polymerization

Raspberry-like composite microspheres with polystyrene (PS) cores and silica shell were prepared through miniemulsion polymerization by using the anionic sodium dodecyl sulfate (SDS) as a surfactant and 1-vinylimidazole (1-VID) as an auxiliary monomer. The strong acid–base interaction between acidic hydroxyl groups of silica surfaces and basic amino groups of 1-VID promote the formation of long-term stable PS/SiO₂ nanocomposite microspheres. Transmission electron microscopy TEM studies indicated that the acid–base interaction between silica nanoparticles and auxiliary monomer was strong enough for the formation of colloidally stable composite microspheres, which have raspberry-like morphology. Influences of several synthetic parameters, such as initial silica amount, the amount of auxiliary monomer 1-VID, and SDS concentration on the polymerization stability, diameters, and morphology of the composite microspheres were studied. A tentative mechanism of the formation of nanocomposite particles was proposed.     

Synthesis of Ag-SiO2 composite nanospheres and their catalytic activity

A simple,mild,and time-saving method is employed to synthesize Ag-SiO2 composite nanospheres with Ag nanoparticles uniformly distributed on the surface of SiO2 nanoparticles.The chemical elements and the morphology of Ag-SiO2 composite nanospheres were analyzed with transmission electron microscopy(TEM),X-ray power diffraction(XRD),and X-ray photoelectron spectroscopy(XPS).On the surface of Ag-SiO2 composite nanospheres,silane coupling agent(KH-550)is introduced as an intermediary to connect the surfaces of SiO2 nanospheres and Ag nanoparticles,which is also helpful for avoiding the aggregation of Ag nanoparticles.It is found that Ag-SiO2 composite nanospheres have very good catalytic properties for the reduction of organic dyes,which may have potential application in wastewater treatment.     

Moisture and solvent responsive cellulose/SiO<Subscript>2</Subscript> nanocomposite materials

Water responsive SiO₂/cellulose nanocomposite hydrogels and films were constructed, for the first time, by dispersing SiO₂ nanoparticles into cellulose solution in LiOH/urea solvent, and then by crosslinking with epichlorohydrin or regeneration in coagulation bath, respectively. The cellulose nanocomposite materials were characterized by Field emission scanning electron microscopy, FTIR, dynamic rheology, wide angle X-ray diffraction and mechanical test. The SiO₂/cellulose nanocomposites at wet state or in water displayed unique behaviors, showing higher light transmittance than those before contacting with water. The results revealed that strong hydrogen-bonding interaction among water, cellulose and SiO₂ led the good dispersion of SiO₂ nanoparticles in the cellulose matrix. The incorporation of SiO₂ nanoparticles improved the transmittance and mechanical strength of the cellulose hydrogels, and also enhanced the mechanical strength of the films. Especially, the cellulose/SiO₂ nanocomposite films were milky at dry state, and changed to transparent after being soaked in water, different from the cellulose film without the SiO₂ nanoparticles. In our findings, SiO₂ and cellulose with water could form strong hydrogen bonding to create a homogenous network structure. The cellulose/SiO₂ composite as a smart material exhibited moisture and solvent responsiveness, showing potential applications in moisture detection.     

SiO2/PE/ Bi2S3核壳结构纳米颗粒的合成与性能(英)

以多层电解质作为微型反应器，制备了SiO₂/ Polyelectrolyte(PE) / Bi₂S₃核壳纳米粒子。XRD结果表明Bi₂S₃颗粒属于正交晶系。由透射电镜和场发射扫描电镜照片可知，在直径为640 nm左右的SiO₂表面覆盖了厚度35 nm的Bi₂S₃壳层。红外光谱分析结果表明硅烷网络在结构上发生了变化(SiO₂表面的硅烷醇键沉积在Bi₂S₃的表面)。SiO₂核和SiO₂ / PE / Bi₂S₃的紫外-可见吸收光谱显示在900 nm存在典型吸收边。