纳米氮化硅粉粒的表面改性研究

纳米氮化硅具有很高的化学稳定性、耐高温性能、良好的机械性能及优异的介电性能(高介电常数、高介电强度)犤9犦,在许多领域有着广泛的应用。作为一种重要的陶瓷材料,目前对它的表面改性大多是采用烧结助剂包覆氮化硅粉粒,提高烧结助剂在氮化硅浆料中的分散程度及浆料的流动性,     

微波加热液相均匀沉淀法制备纳米Sb2O3阻燃剂(英)

Antimonyoxide(Sb2O3)isanimportantadditiveflameretardant.Itisextensivelyusedinflameretar鄄danttreatmentofpolyolefine,polyvinylchloride,polyesterandtextiles.TheefficiencyofhalogenatedflameretardantcanbeenhancedbycooperatingwithSb2O3.ThesizeofSb2O3hasgreatef…     

纸张涂料用纳米CaCO3表面改性的研究

利用铝锆偶联剂对纳米CaCO₃进行表面改性。采用红外光谱(IR)、X射线衍射分析(XRD)、热分析(TG-DTG)对改性前后的纳米CaCO₃进行了表征。通过透射电镜(TEM)、粒度分析、吸油值、比表面积及静滴接触角等实验对纳米CaCO₃的表面改性效果进行评价。红外光谱分析表明，偶联剂以化学键合的方式在纳米CaCO₃的表面形成化学吸附。TEM及粒度分析结果显示，未改性纳米CaCO₃存在严重的团聚现象，而改性后纳米CaCO₃的分散性有很大改善。经表面改性，水滴在纳米CaCO₃粉体压片表面静滴接触角变大，改性纳米CaCO₃同时具有亲水性和亲油性，能够较好地分散在水和有机相中。将改性前后的纳米CaCO₃分别加入到纸张涂料体系中，制得纳米CaCO₃复合纸张涂料。涂料流变实验表明，经铝锆偶联剂表面改性的纳米CaCO₃制得的复合纸张涂料具有较高的动态弹性模量和粘性模量。     

纳米TiO2有机表面改性的研究

利用硅烷偶联剂(KH-550)对表面包覆氧化硅的金红石相纳米TiO₂进行了有机表面改性。采用红外光谱(IR)、X射线光电子能谱(XPS)、热分析(TG-DTA)、BET、透射电镜(TEM)、润湿性和分散性实验等对表面改性前后的纳米TiO₂进行了表征。红外光谱和X射线光电子能谱表明，KH-550以化学键合的方式结合在纳米TiO₂的表面，并形成了有机包覆层。经测量，纳米TiO₂表面的KH-550的质量分数约为2.0%。讨论了产生KH-550理论包覆量与实际包覆量差异的原因。TEM、TG和BET得出的结果显示，在纳米TiO₂有机表面改性过程中存在明显的团聚现象，改进分散纳米TiO₂的方法是提高有机改性效果的关键。润湿性实验和分散性实验表明，经KH-550表面改性的纳米TiO₂同时具有亲水性和亲油性。     

Non-isothermal crystallization kinetics of recycled PET-Si3N4 nanocomposites

Poly(ethylene terephthalate) (PET) is an important industrial material and has been widely applied in consumer products. Due to its slow crystallization rate, nanoparticles are incorporated into PET to function as heterogeneous nucleating agents. In this study, the non-isothermal crystallization behavior of recycled PET-silicon nitride (Si₃N₄) nanocomposites was investigated by differential scanning calorimetry (DSC). In the general analysis of the non-isothermal crystallization curves, it was found that the Si₃N₄ nanoparticles could effectively accelerate the nucleation of PET, but the crystal growth rate was slowed down when the Si₃N₄ content was more than 1 wt%. This might be attributed to the interaction between the PET chains and the surface-treated Si₃N₄ nanoparticles. Results obtained from Avrami and Mo treatments agreed well with the general analysis. Application of the Kissinger method and isoconversional method of Flynn-Wall-Ozawa also showed that Si₃N₄ nanoparticles had a good nucleation effect on the crystallization of PET, and the crystal growth was hindered by Si₃N₄ when the particle loading is higher than 1 wt%.     

Synthesis and structural characterization of Al7C3N3-homeotypic aluminum silicon oxycarbonitride, (Al7−xSix)(OyCzN6−y−z) (x∼1.2, y∼1.0 and z∼3.5)

A new aluminum silicon oxycarbonitride, (Al_5.8Si_1.2)(O_1.0C_3.5N_1.5), has been synthesized and characterized by X-ray powder diffraction (XRPD), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX) and electron energy loss spectroscopy (EELS). The title compound is hexagonal with space group P6₃/mmc and unit-cell dimensions a=0.322508(4) nm, c=3.17193(4) nm and V=0.285717(6) nm³. The atom ratios of Al:Si and those of O:C:N were, respectively, determined by EDX and EELS. The initial structural model was successfully derived from the XRPD data by the direct methods and further refined by the Rietveld method. The crystal is most probably composed of four types of domains with nearly the same fraction, each of which is isotypic to Al₇C₃N₃ with space group P6₃mc. The existence of another new oxycarbonitride (Al_6.6Si_1.4)(O_0.7C_4.3N_2.0), which must be homeotypic to Al₈C₃N₄, has been also demonstrated by XRPD and TEM.     

AES investigations on starting powders for high performance ceramics

AES depth profiles on ceramic powders (untreated/hydrolyzed/oxidized/ (Al, Y)₂O₃ coated Si₃N₄, [BaO, SiO₂] coated Al₂O₃) are feasible on thin, homogeneous layers or m sized agglomerations prepared on an Au foil. By means of the depth profiles one can qualitatively characterize the coating around the particles. Factor analysis of the depth profiles on the differently treated Si₃N₄ powders suggests the existence of an Si₂N₂O phase on the oxidized sample.Dedicated to Professor Günther Tölg on the occasion of his 60th birthday     

C/g-C3N4/MoS2复合材料的制备及光催化性能

首先以尿素和葡萄糖为前驱体,通过热缩合方法制备了C/g-C₃N₄,然后利用溶剂热法合成C/g-C₃N₄/MoS₂三元复合材料。通过不同的手段对其进行了表征,结果表明,与C/g-C₃N₄相比,该三元复合材料不仅具有更强的光吸收性能和更大的表面积,而且更有利于电子的转移。同时对其可见光催化降解甲基橙性能进行研究,结果发现,C/g-C₃N₄/MoS₂-2.0%复合材料(含有质量分数为2.0%的MoS₂)表现出最高的反应速率常数(0.0086 min^-1),分别为g-C₃N₄/MoS₂-2.0%(0.0015 min^-1)和C/g-C₃N₄(0.0036min^-1)的5.7倍和2.3倍。     

羟基化对Si3N4粉体水相分散性的影响

过施加硝酸有效地使氮化硅（Si₃N₄）粉末的表面羟基化,以改善在水性介质中的分散性。与天然粉末相比,羟基化粉末在水性介质中产生更稳定的胶体分散。傅里叶变换红外光谱和X射线光电子能谱结果表明,随着羟基改性,Si₃N₄粉末的羟基含量显著增加。这有助于防止Si₃N₄粉末在水性介质中聚集。此外,热重分析表明羟基化Si₃N₄粉末的羟基含量比天然粉末高68.8%。Si₃N₄粉末的表面亲水性通过羟基改性而增强,并且粉末分散性随着羟基含量的增加而提高。     

羟基化对Si3N4粉体水相分散性的影响

通过施加硝酸有效地使氮化硅（Si₃N₄）粉末的表面羟基化,以改善在水性介质中的分散性。与天然粉末相比,羟基化粉末在水性介质中产生更稳定的胶体分散。傅里叶变换红外光谱和X射线光电子能谱结果表明,随着羟基改性,Si₃N₄粉末的羟基含量显著增加。这有助于防止Si₃N₄粉末在水性介质中聚集。此外,热重分析表明羟基化Si₃N₄粉末的羟基含量比天然粉末高68.8%。Si₃N₄粉末的表面亲水性通过羟基改性而增强,并且粉末分散性随着羟基含量的增加而提高。     

共沉淀法和模板法制备均匀负载CeO2/ SiO2的研究

CeO2是三效催化剂(简称TWC)中被广泛应用的涂层材料[1],其优良的储放氧能力(OSC)可以扩大TWC的工作窗口,并可以在与γ-Al2O3的相互作用中提高Al2O3的高温稳定性[2]。在高温下,CeO2会因晶粒迅速长大而失去储放氧能力。为了提高CeO2的高温抗烧结能力,以及进一步提高其氧化还原能力,大部分研究者选择了在CeO2晶格中掺入其他离子的方法,如:Zr4 、Pr3 、La3 等[3￣5],这些离子在CeO2晶格中引入了晶格缺陷,不但稳定了结构,而且提高了氧传输能力。SiO2具有很高的化学稳定性、高比表面及高热稳定性,是载体的理想选择。研究表明,CeO2负载…     

Luminescence enhancement of Eu, Ce co-doped Ba3Si5O13−δNδ phosphors

Host lattice Ba₃Si₅O_13−δN_δ oxonitridosilicates have been synthesized by the traditional solid state reaction method. The lattice structure is based on layers of vertex-linked SiO₄ tetrahedrons and Ba²⁺ ions, where each Ba²⁺ ion is coordinated by eight oxygen atoms forming distorted square antiprisms. Under an excitation wavelength of 365 nm, Ba₃Si₅O_13−δN_δ:Eu²⁺ and Ba₃Si₅O_13−δN_δ:Eu²⁺,Ce³⁺ show broad emission bands from about 400-620 nm, with maxima at about 480 nm and half-peak width of around 130 nm. The emission intensity is strongly enhanced by co-doping Ce³⁺ ions into the Ba₃Si₅O_13−δN_δ:Eu²⁺ phosphor, which could be explained by energy transfer. The excitation band from the near UV to the blue light region confirms the possibility that Ba₃Si₅O_13−δN_δ:Eu²⁺, Ce³⁺ could be used as a phosphor for white LEDs.     

In-Situ Synthesis and Characterization of Nanocomposites in the Si-Ti-N and Si-Ti-C Systems

The pyrolysis (1000 °C) of a liquid poly(vinylmethyl-co-methyl)silazane modified by tetrakis(dimethylamido)titanium in flowing ammonia, nitrogen and argon followed by the annealing (1000–1800 °C) of as-pyrolyzed ceramic powders have been investigated in detail. We first provide a comprehensive mechanistic study of the polymer-to-ceramic conversion based on TG experiments coupled with in-situ mass spectrometry and ex-situ solid-state NMR and FTIR spectroscopies of both the chemically modified polymer and the pyrolysis intermediates. The pyrolysis leads to X-ray amorphous materials with chemical bonding and ceramic yields controlled by the nature of the atmosphere. Then, the structural evolution of the amorphous network of ammonia-, nitrogen- and argon-treated ceramics has been studied above 1000 °C under nitrogen and argon by X-ray diffraction and electron microscopy. HRTEM images coupled with XRD confirm the formation of nanocomposites after annealing at 1400 °C. Their unique nanostructural feature appears to be the result of both the molecular origin of the materials and the nature of the atmosphere used during pyrolysis. Samples are composed of an amorphous Si-based ceramic matrix in which TiN_xC_y nanocrystals (x + y = 1) are homogeneously formed “in situ” in the matrix during the process and evolve toward fully crystallized compounds as TiN/Si₃N₄, TiN_xC_y (x + y = 1)/SiC and TiC/SiC nanocomposites after annealing to 1800 °C as a function of the atmosphere.     

CNTs表面改性与TiO2-CNTs异质结光催化性能

碳纳米管(CNTs)混酸(H₂SO₄/HNO₃, 体积比为3:1)超声辅助纯化及氧化植入活性基团－COOH, 进一步借助其转化为酰氯基团, 分别于CNTs 表面共价嫁接亲水性赖氨酸及亲脂性正十八胺基团, 赋予赖氨酸表面改性CNTs 显著水溶(6.85 mg·mL-1)和十八胺表面改性CNTs 显著醇溶(10.15 mg·mL^-1)性能. 运用低温水热法以亲水性CNTs 复合TiO₂, 溶胶-凝胶法以亲脂性CNTs 复合TiO₂, 观察到复合催化剂光催化性能随CNTs 溶剂分散性能增加而明显提升. 运用傅里叶变换红外(FTIR)、激光拉曼、X射线衍射(XRD)、Brunauer-Emmett-Teller 低温氮气吸附、透射电镜(TEM)及X光电子能谱(XPS)等手段表征, 系统探讨CNTs 的表面改性机制及CNTs 溶解分散性能与复合催化剂的光活性的关联. 认为表面改性CNTs 借助Ti－O－C键合促进其与纳米TiO₂的异质结合, 从而充分利用CNTs的大比表面积及电荷传输性能促进催化剂的污染物光催化降解.     

钛氧有机化合物常压低温液相合成纳米二氧化钛晶体的研究

二氧化钛晶体有三种晶型，锐钛矿型、金红石型和板钛矿型，每一种晶型都表现出不同的性质，如光折射指数、化学反应性和光催化活性。锐钛矿和金红石型纳米二氧化钛在催化剂犤１，２犦、太阳能转化犤３～６犦、功能陶瓷犤７～９犦、湿度和高温氧气的敏感元件犤１０犦、化妆品犤１１犦和无机膜犤１２犦等许多方面都有广泛的应用前景。金红石型TiO２比锐钛矿型稳定，有较高的硬度、密度、介电常数和折射率，因此在高级涂料、化妆品和电子陶瓷等方面有着更重要的应用价值。锐钛矿型纳米TiO２晶体已发展的制备法主要有Sol－Gel法犤１３，１４…     

Synthesis and Characterization of Hyperbranched Polyesters Based on Isophthalic Acid and Trimethylolpropane

Hydroxyl-terminated hyperbranched polyesters (HBPEs) with aromatic/aliphatic structure were synthesized at three different monomer mole ratios (A₂/B₃=1, 0.9, and 0.6, respectively) by melt polycondensation of isophthalic acid and trimethylolpropane via A₂+ B₃ approach. Fourier transform infrared (FTIR) spectroscopy indicated that the expected HBPEs, which showed excellent solubility in a variety of polar solvents such as N, N-dimethyl formamide (DMF), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide (DMSO), and terahydrofuran (THF), were produced without gelation during the polymerization. The weight-average molecular weight of HBPEs ranged from 7014 to 8306 and their inherent viscosities were varied from 0.17 to 0.34 dL/g. The degree of branching of the HBPEs was estimated to be 0.39–0.49 by¹H-NMR and ¹³C-NMR measurement. Their glass transition temperature measured by differential scanning calorimetry (DSC) was between 64 and 86°C. The thermogravimetric analysis (TGA) measurement revealed that HBPEs had ca 8.5% weight-loss at 300°C in N₂.     

g-C3N4-BiOBr复合材料制备及可见光催化性能

利用原位沉积法将Bi OBr纳米片生长到g-C_3N_4表面,制得g-C_3N_4-Bi OBr p-n型异质结复合光催化剂。采用X射线衍射(XRD)、红外光谱(FTIR)、场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)、紫外可见漫反射(UV-Vis-DRS)和荧光光谱(PL)等测试对光催化剂结构和性能进行表征。通过可见光辐照降解甲基橙水溶液检测评估复合光催化剂光催化活性。研究结果表明:复合光催化剂由Bi OBr和g-C_3N_4两相组成,Bi OBr纳米片在片状g-C_3N_4表面快速形核生长形成面-面复合结构。相比于纯相g-C_3N_4和Bi OBr,g-C_3N_4-Bi OBr复合材料具有更强可见光吸收能力,吸收带边红移。在可见光辐照100 min后,性能最佳的2:8 gC_3N_4-Bi OBr复合光催化剂光催化活性分别是纯相g-C_3N_4和Bi OBr的1.8和1.2倍,经过4次循环实验后,其降解率仍达84%,说明复合结构光催化剂催化性能和稳定性增强。复合光催化剂的荧光强度显著降低,说明光生载流子复合得到了有效抑制。复合光催化剂催化性能的提高归因于p-n型异质结促进电荷有效分离、抑制电子-空穴复合和吸收光波长范围的扩展,相比单一成分材料具有更好的催化活性和稳定性。自由基捕获实验证明,可见光降解甲基橙光催化过程中的主要活性成分为空穴,并据此提出了可能的光催化机理。     

Research on Molecular Structure and Electronic Properties of Ln3+ (Ce3+, Tb3+, Pr3+)/Li+ and Eu2+ Co-Doped Sr2Si5N8 via DFT Calculation

We use density functional theory (DFT) to study the molecular structure and electronic band structure of Sr₂Si₅N₈:Eu²⁺ doped with trivalent lanthanides (Ln³⁺ = Ce³⁺, Tb³⁺, Pr³⁺). Li⁺ was used as a charge compensator for the charge imbalance caused by the partial replacement of Sr²⁺ by Ln³⁺. The doping of Ln lanthanide atom causes the structure of Sr₂Si₅N₈ lattice to shrink due to the smaller atomic radius of Ln³⁺ and Li⁺ compared to Sr²⁺. The doped structure’s formation energy indicates that the formation energy of Li⁺, which is used to compensate for the charge imbalance, is the lowest when the Sr2 site is doped. Thus, a suitable Li⁺ doping site for double-doped lanthanide ions can be provided. In Sr₂Si₅N₈:Eu²⁺, the doped Ce³⁺ can occupy partly the site of Sr₁²⁺ ([SrN₈]), while Eu²⁺ accounts for Sr₁²⁺ and Sr₂²⁺ ([SrN₁₀]). When the Pr³⁺ ion is selected as the dopant in Sr₂Si₅N₈:Eu²⁺, Pr³⁺ and Eu²⁺ would replace Sr₂²⁺ simultaneously. In this theoretical model, the replacement of Sr²⁺ by Tb³⁺ cannot exist reasonably. For the electronic structure, the energy level of Sr₂Si₅N₈:Eu²⁺/Li⁺ doped with Ce³⁺ and Pr³⁺ appears at the bottom of the conduction band or in the forbidden band, which reduces the energy bandgap of Sr₂Si₅N₈. We use DFT+U to adjust the lanthanide ion 4f energy level. The adjusted 4f-CBM of Ce_Sr1Li_Sr1-Sr₂Si₅N₈ is from 2.42 to 2.85 eV. The energy range of 4f-CBM in Pr_Sr1Li_Sr1-Sr₂Si₅N₈ is 2.75–2.99 eV and its peak is 2.90 eV; the addition of Ce³⁺ in Eu_Sr1Ce_Sr1Li_Sr1 made the 4f energy level of Eu²⁺ blue shift. The addition of Pr³⁺ in Eu_Sr2Pr_Sr2Li_Sr1 makes part of the Eu²⁺ 4f energy level blue shift. Eu²⁺ 4f energy level in Eu_Sr2Ce_Sr1Li_Sr1 is not in the forbidden band, so Eu²⁺ is not used as the emission center.     

g-C3N4-BiOBr复合材料制备及可见光催化性能

利用原位沉积法将BiOBr纳米片生长到g-C₃N₄表面,制得g-C₃N₄-BiOBr p-n型异质结复合光催化剂。采用X射线衍射(XRD)、红外光谱(FTIR)、场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)、紫外可见漫反射(UV-Vis-DRS)和荧光光谱(PL)等测试对光催化剂结构和性能进行表征。通过可见光辐照降解甲基橙水溶液检测评估复合光催化剂光催化活性。研究结果表明:复合光催化剂由BiOBr和g-C₃N₄两相组成,BiOBr纳米片在片状g-C₃N₄表面快速形核生长形成面-面复合结构。相比于纯相g-C₃N₄和BiOBr,g-C₃N₄-BiOBr复合材料具有更强可见光吸收能力,吸收带边红移。在可见光辐照100 min后,性能最佳的2:8 g-C₃N₄-BiOBr复合光催化剂光催化活性分别是纯相g-C₃N₄和BiOBr的1.8和1.2倍,经过4次循环实验后,其降解率仍达84%,说明复合结构光催化剂催化性能和稳定性增强。复合光催化剂的荧光强度显著降低,说明光生载流子复合得到了有效抑制。复合光催化剂催化性能的提高归因于p-n型异质结促进电荷有效分离、抑制电子-空穴复合和吸收光波长范围的扩展,相比单一成分材料具有更好的催化活性和稳定性。自由基捕获实验证明,可见光降解甲基橙光催化过程中的主要活性成分为空穴,并据此提出了可能的光催化机理。     

单分散Fe_3O_4亚微米球的合成与表征

采用溶剂热法制备出具有尺寸可调、分散性好、亲水性和超顺磁性的亚微米Fe3O4磁球,并考察了不同表面活性剂、反应时间和反应温度的影响。分别采用XRD、FE-SEM、FTIR、超导量子干涉仪(SQUID)对其结构、形貌、表面性质及磁性进行了表征。结果表明,产物为立方结构、具有单分散性的Fe3O4亚微米球,粒径在140~360nm可调。所得Fe3O4亚微米球在室温条件下的磁滞回线表现出超顺磁性,矫顽力为零。不同表面活性剂对粒径大小和磁饱和强度有一定的影响,但对其形貌和晶相结构无影响。随着反应时间的延长和反应温度的提高,颗粒粒径有逐渐减小的趋势。