Unlike surfactant–polymer interactions of sodium dodecyl sulfate and sodium dodecylbenzene sulfonate with water-soluble polymers

Single and mixed micelle formation by sodium dodecyl sulfate (SDS) and sodium dodecylbenzene sulfonate (SDBS) and their mixtures in pure water and in the presence of water-soluble polymers such as Synperonic 85 (triblock polymer, TBP), hydroxypropylcellulose (HPC), and carboxymethylcellulose sodium salt (CMC) were studied with the help of conductivity, pyrene fluorescence, cyclic voltammetry, and viscosity measurements. Conductivity measurements showed a single aggregation process for pure surfactants and their mixtures both in pure water as well as in the presence of water-soluble polymers. Triple breaks corresponding to two aggregation processes for SDS, SDBS, and their mixture in the presence of TBP were observed from fluorescence measurements. The first one demonstrated the critical aggregation process due to the adsorption of surfactant monomers on TBP macromolecule. The second one was attributed to the participation of surfactant–polymer aggregates formed at the first one, in the micelle formation process. The aggregation number ( N _agg) of single and mixed micelles and diffusion coefficient ( D) of electroactive probe were computed from the fluorescence and cyclic voltammetry measurements, respectively. Both parameters, along with the viscosity results, indicated stronger SDS–polymer interactions in comparison to SDBS–polymer interactions. Mixed surfactant–polymer interactions showed compensating effects of both pure surfactants. The nature of mixed micelles was found to be ideal in all cases, as evaluated by applying the regular solution and Motomura's approximations.     

Effect of Sodium Barbital on the Physico‐chemical Properties of Surfactants with Different Charges

The effects of sodium barbital (SB) on the solubility of different kinds of surfactants viz., CTAB (cationic head group), SDS (anionic head group) and Triton X‐100 (non ionic head group) in solution phase as well as their first and second critical micelle concentrations (CMC1 and CMC2), the change in Kraft temperatures (T_K) and cloud points (CP) have been studied. Furthermore, the article reports SB‐surfactant interaction study, which is application oriented and highlights the underlying physico‐chemical aspects of the system through florescence and conductivity measurements. The results show that the solubility of CTAB and Triton X‐100 increases with the addition of SB, and that of SDS increases in the presence of small amounts of SB and decreases in the presence of large amounts of SB. With the increasing SB concentration, the CMC of CTAB and CMC1 of Triton X‐100 both increase, while the CMC of SDS decreases, and the CMC2 of Triton X‐100 has no obvious change. The addition of SB decreases the T_K of CTAB sharply, but it increases the T_K of SDS and the CP of Triton X‐100. The different effects of SB on the physico‐chemical properties of differently charged surfactants may be related to its different interactions with the surfactants.     

Interaction of Nonionic Surfactant Triton-X-100 with Ionic Surfactants

The interaction in two mixtures of a nonionic surfactant Triton-X-100 (TX-100) and different ionic surfactants was investigated. The two mixtures were TX-100/sodium dodecyl sulfate (SDS) and TX-100/cetyltrimethylammonium bromide (CTAB) at molar fraction of TX-100, α_TX-100 = 0.6. The surface properties of the surfactants, critical micelle concentration (CMC), effectiveness of surface tension reduction (γ_CMC), maximum surface excess concentration (Γ_max), and minimum area per molecule at the air/solution interface (A _min) were determined for both individual surfactants and their mixtures. The significant deviations from ideal behavior (attractive interactions) of the nonionic/ionic surfactant mixtures were also determined. Mixtures of both TX-100/SDS and TX-100/CTAB exhibited synergism in surface tension reduction efficiency and mixed micelle formation, but neither exhibited synergism in surface tension reduction effectiveness.     

BINDING OF IONIC SURFACTANTS ON OPPOSITELY CHARGED POLYELECTROLYTES OBSERVED BY FLUORESCENCE METHODS

Our recent studies concerning the binding of ionic surfactants on oppositely charged polyelectrolytes observedwith fluorescence techniques are reviewed. The cationic surfactants cetyltrimethylammonium bromide (CTAB),dodecyltrimethylammonium chloride (DTAC), and nonionic surfactant octaethylene glycol monododecyl ether (C_(12)E_8) wereallowed to bind on anionic poly(2-acrylamido-2-methylpropanesulfonic acid) (PAMPS) and its pyrene and/or naphthalenelabeled copolymers. The relative excimer emission intensity I_E/I_M of a cationic probe l-pyrenemethylamine hydrochloride(PyMeA·HCl) and the non-radiative energy transfer (NRET) I_(Py)/I_(Np) of naphthalene to pyrene for labeled polyelectrolyteswere chosen to monitor the binding process and the conformation change of surfactant-bound polyelectrolytes. The 1:1aggregation of polyelectrolyte-CTAB with respect to the charge was found as long as the CTAB concentration was slightlyhigher than its critical aggregation concentration (CAC). The intermolecular NRET indicated that the CTAB-boundpolyelectrolytes aggregated together through the hydrophobic interaction between the CTAB tails. However, neither 1:1polyelectrolyte-DTAC aggregation nor intermolecular aggregation of DTAC-bound polyelectrolyte was observed owing to itsweaker hydrophobicity of 12 carbon atoms in the tail, which is shorter than that of CTAB. As known from the fluorescenceresults, nonionic surfactant C_(12)E_8 did not bind on the anionic polyelectrolytes, but the presence of PAMPS promoted themicelle formation for C_(12)E_8 at the CAC slightly below its critical micelle concentration (CMC). The solid complex of dansyllabeled AMPS copolymer-surfactant exhibited a decrease in local polarity with increasing charge density of thepolyelectrolyte or with alkane tail length of the surfactant. SAXS suggested a lamella structure for the AMPS copolymer-surfactant solid complexes with a long period of 3.87 nm for CTAB and 3.04 nm for DTAC, respectively.     

Micellar parameters of diblock copolymers and their interactions with ionic surfactants

The interactions of non-ionic amphiphilic diblock copolymer poly（oxyethylene/oxybutylene）(E₃₉B₁₈) with anionic surfactant sodium dodecyl sulphate（SDS） and cationic surfactant hexadecyltrimethylammonium bromide（CTAB） were studied by using various techniques such as surface tension,conductivity,steady-state fluorescence and dynamic light scattering.Surface tension measurements were used to determine the critical micelle concentration（CMC） and thereby the free energy of micellization(△G_mic),free energy of adsorption(△G_ads),surface excess concentration（Γ） and minimum area per molecule（A）.Conductivity measurements were used to determine the critical micelle concentration（CMC）,critical aggregation concentration（CAC）,polymer saturation point（PSP）,degree of ionization（α） and counter ion binding（β）. Dynamic light scattering experiments were performed to check the changes in physiochemical properties of the block copolymer micelles taken place due to the interactions of diblock copolymers with ionic surfactants.The ratio of the first and third vibronic peaks（I₁/I₃） indicated the polarity of the pyrene micro environment and was used for the detection of micelle as well as polymer-surfactant interactions.Aggregation number（N）,number of binding sites（n） and free energy of binding （△G_b） for pure surfactants as well as for polymer-surfactant mixed micellar systems were determined by the fluorescence quenching method.     

Binary mixed micelles of chiral sodium undecenyl leucinate and achiral sodium undecenyl sulfate: I. Characterization and application as pseudostationary phases in micellar electrokinetic chromatography

Sodium 10-undecenyl sulfate (SUS), sodium 10-undecenyl leucinate (SUL) and their five different mixed micelles at varied percent mole ratios were prepared. The critical micelle concentration (CMC), C₂₀, γ_CMC, partial specific volume, methylene group selectivity, mobilities and elution window were determined using a variety of analytical techniques. These surfactant systems were then evaluated as novel pseudostationary phases in micellar electrokinetic chromatography (MEKC). As a commonly used pseudostationary phase in MEKC, sodium dodecyl sulfate (SDS) was also evaluated. The CMC values of SUS and SUL were found to be 26 and 16 mM, respectively, whereas the CMC of mixed surfactants was found to be very similar to that of SUL. The C₂₀ values decreased dramatically as the concentration of SUL is increased in the mixed micelle. An increase in SUL content gradually increased the methylene group selectivity making the binary mixed surfactants more hydrophobic. Linear solvation energy relationships (LSERs) and free energy of transfer studies were also applied to predict the selectivity differences between the surfactant systems. The cohesiveness and the hydrogen bond acidic character of the surfactant systems were found to have the most significant influence on selectivity and MEKC retention. The SUS and SDS showed the strongest while SUL showed the weakest hydrogen bond donating capacity. The basicity, interaction with n and π-electrons of the solute and dipolarity/polarizability were the least significant factors in LSER model for the surfactant systems studied. Free energies of transfer of selected functional groups in each surfactant systems were also calculated and found to be in good agreement with the LSER data.     

Thermodynamics of Adsorption and Micellization of Triblock Copolymers of Oxyethylene and Oxybutylene in Aqueous Medium Using Surface Tensiometry

The aqueous solutions of three triblock copolymers based on polyoxyethylene and polyoxybutylene of the type E_mB₁₀E_m have been analyzed by surface tension measurements. Surface activity of these triblock copolymers was studied by measuring surface parameters, like surface excess concentration, Γ₂, area per molecule of polymer and standard Gibb's free energy of adsorption, Δ^oG_ads, at various temperatures in the range of 20 to 50°C. The Effect of block length of hydrophilic portion of triblock copolymers on surface activity was investigated in this work. Miceller behavior of these triblock copolymers was also investigated using above technique. Critical micelle concentration (CMC) was determined from the plot of surface tension versus log of concentration in the range of temperature of 20–50°C. Thermodynamic parameters, standard free energy of micellization, Δ^oG_mic, standard enthalpy of micellization, Δ^oH_mic, and standard entropy of micellization, Δ^oS_mic were calculated from CMC value using closed association model in this range of temperature. Self assembly behavior of triblock copolymer E₂₀B₁₀E₂₀ was compared with E₃₀B₁₀E₃₀ and E₄₈B₁₀E₄₈ triblock copolymer. Effect of temperature on surface and miceller properties of the triblock copolymers was also studied.     

Flow-injection chemiluminescence method for determination of critical micelle concentration of surfactants

In this study, chemiluminescence (CL) behaviour of Luminol-H₂O₂ in the presence of the different concentrations of four surfactants, cetyltrimethylammonium bromide (CTAB), cetylpyridinium bromide (CPB), sodium dodecyl sulphate (SDS) and polyoxyethylene dodecyl ether (Brij-35), was investigated. A novel method for the direct determination of critical micelle concentration (CMC) of the surfactants using flow-injection CL is described. Under the optimum conditions, the luminescence intensity of the Luminol-H₂O₂ system increased gradually with increasing concentration of the surfactants before the CMC, but rapidly reached to the emission maximum at the CMC, followed by a decrease after the CMC. The concentrations of the surfactants corresponding to the luminescence maximum are in agreement with the literature CMC values. The main factors affecting the determination of CMC are discussed. The mechanistic studies show that the luminescence peaks observed in the experiment were mainly because of the protective effect of the micelle against the transition of the excited species and the retarding effect of the micelle structures on the CL reaction rate.     

PHOTOLUMINESCENT PROPERTIES OF OCTADECYLRHODAMINE B IN MICELLES OF LOW-MOLECULAR-WEIGHT DETERGENTS AND WATER-SOLUBLE TRIBLOCK COPOLYMERS

The fluorescence intensity, lifetime and degree of polarization of octadecylrhodamine B (ORB) have been measured in order to examine the usefulness of this molecule as a probe of micelle properties for low-molecular-weight detergents and water-soluble triblock copolymers. The surfactants examined are hexadecyltrimethylammonium chloride (HTAC), Triton X-100 (TX-100), sodium dode-cylsulfate (SDS), sodium tetradecylsulfate (STS), and Pluronic L64 (ethylene oxide [EO]₁₃ propylene oxide₃₀ EO₁₃, L64). The fluorescence intensity and degree of polarization of ORB show drastic increases at the critical micelle concentrations (CMC) of HTAC, TX-100 and L64, indicating that ORB is cooperatively incorporated into the micelles upon micellization. This feature demonstrates the validity of ORB as a probe for detecting micelle formation of these surfactants. However, in the case of SDS and STS, the fluorescence intensity starts to rise at concentrations far below the CMC, and the degree of polarization does not show significant changes at the CMC. The details of the interactions between ORB and the anionic surfactants have been unclear. These facts imply that some caution is needed for the applications of ORB to the systems containing anionic surfactants. The local viscosity of L64 micelles has been determined by polarization and lifetime measurements. The structure of the block copolymer micelles and the locations of the probe in the micelles are discussed in terms of the viscosity data.     

Effects of Metal Ions on the Micellization of Ionic Surfactants

The effect of metal ions (Cu(II), Zn(II), Co(II), Ni(II), La(III), Fe(III)) on the critical micelle concentration (CMC) of ionic surfactants (sodium dodecyl sulfate (SDS) and hexadecyltrimethylammonium bromide (CTAB)) were investigated at 25±0.1°C, μ = 0.1 M (KNO₃), using conductivity method in this paper. A series of general empirical expressions about the relationship between the CMC values for SDS and CTAB and the concentrations of metal ions have been derived. The results showed that the CMC values for both SDS and CTAB decreased with increasing the concentrations of metal ions. This can be interpreted by the counterion effect and the entropy driving effect.     

Micellar Behavior of Polystyrene-Poly(Ethylene Oxide) Diblock Copolymers in Aqueous Media: Effect of Copolymer Composition,Temperature, Salt,and Surfactants

Formation and structure of micelles from two amphiphilic polystyrene-block-poly(ethylene oxide) (PS-PEO) diblock copolymers (PS mol.wt. 1000; PEO mol.wt. 3000 and 5000) were examined by surface tension, viscosity, steady state fluorescence, dynamic light scattering (DLS), small angle neutron scattering (SANS), and cryo-transmission electron microscopy (cryo-TEM). The critical micelle concentration (CMC) of the copolymers in aqueous solution was ca. 0.05%; micelle hydrodynamic diameter was 30–35 nm with a narrow size distribution. SANS studies show that the copolymers form ellipsoidal micelles with semi major axis ～23 nm and semi minor axis ～8 nm. No significant change in the structure was found with temperature and presence of salt. The copolymer micelles interaction with the ionic surfactants sodium dodecyl sulphate (SDS) and dodecyltrimethylammonium bromide (DTAB) was also examined by DLS and SANS.     

Investigation of SDS, DTAB and CTAB micelle microviscosities by electron spin resonance

Electron spin resonance spectroscopy (ESR) of the nitroxide labelled fatty acid probes (5-, 16-doxyl stearic acid) was used to monitor the micelle microviscosity of three surfactants at various concentrations in aqueous solution: sodium dodecyl sulphate (SDS), dodecyltrimethylammonium bromide (DTAB) and cetyltrimethylammonium bromide (CTAB). At low surfactant concentration, there is no micelle, the ESR probe is dissolved in water/surfactant homogeneous phase and gives his microviscosity. At higher surfactant concentration, an abrupt increase in microviscosity indicates the apparition of micelles and, the solubilization of the probes in micelles. The microviscosity of the three surfactants, in a large surfactant range, was obtained as well as the critical micelle concentration (CMC). The microviscosity increased slightly with the increase in surfactant concentration. Phosphate buffer lowered the CMC value and generally increased the microviscosity.     

Removal of cadmium ions using micellar-enhanced ultrafiltration with mixed anionic-nonionic surfactants

Micellar-enhanced ultrafiltration (MEUF) was used to remove cadmium ions from wastewater efficiently. In this study the nonionic surfactants polyoxyethyleneglycol dodecyl ether (Brij35) and polyoxyethylene octyl phenyl ether (TritonX-100) were for micellar-enhanced ultrafiltration to lower the dosage of the anionic surfactant sodium dodecyl sulfate (SDS). The surfactant critical micelle concentration (CMC) and the degree of micelle counterion binding were investigated. The effects of nonionic surfactant addition on the efficiency of cadmium removal, the residual quantities of surfactant, the permeate flux and the secondary membrane resistance were investigated. A comparison between MEUF with SDS and MEUF with mixed anionic–nonionic surfactants was undertaken. The results show that the addition of Brij35 or TritonX-100 reduced the CMC of SDS and the degree of counterion binding for the micelles. Due to these variations the Cd²⁺ rejection efficiency was at a maximum when the Brij35:SDS and the TritonX-100:SDS molar ratio was 0.5. The Cd²⁺ rejection efficiency in MEUF with SDS is higher than for MEUF with mixed surfactants when the total dose of surfactant is constant. The permeate flux of MEUF with SDS is higher than that for MEUF with mixed surfactants while the secondary resistance of MEUF with SDS is less than that of MEUF with mixed surfactants.     

Steady-state fluorescence investigations of aqueous binary mixtures of myristyl alcohol based bis-sulfosuccinate anionic gemini surfactant and effect of different conventional surfactants therein

The present research work is associated with the fluorescence investigations of binary aqueous mixed surfactants solutions of anionic bis-sulfosuccinate gemini surfactant (BSGSMA_1,8) and three different conventional surfactants—anionic viz. sodium dodecyl sulfate (SDS), cationic viz. cetyl trimethyl ammonium bromide (CTAB), and nonionic surfactant viz. Triton X 100. Steady-state fluorescence spectroscopy technique has been utilized to examine the micellization behavior of aqueous solution of pure myristyl alcohol-based BSGSMA_1,8 having flexible methylene chain [(CH₂)₈] as spacer group. Critical micelle concentration (CMC), aggregation number (N), and micropolarity of pure and mixed surfactants systems were explored during the investigations. The results revealed the best synergism behavior of prepared gemini BSGSMA_1,8 with SDS as compared to CTAB and Triton X 100. The maximum reduction in the value of pyrene intensity ratio (I₁/I₃) was observed for gemini and SDS mixed surfactant solution. On the other hand, the increased I₁/I₃ value of mixed gemini with Triton X 100 exhibited that mixed surfactant system of anionic gemini BSGSMA_1,8 with non-ionic Triton X 100 is not as compact as other mixed surfactant systems. Aggregation number increased and micropolarity decreased with increased concentration of gemini surfactants.     

Spectroscopic analysis of naphtholazobenzimidazole in organised solution

Micelle–water partition coefficient (K_x ) of naphtholazobenzimidazole dye (NAB) in aqueous solutions of cetyltrimethylammonium bromide (CTAB) and sodium dodecyl sulphate (SDS) has been determined spectrophotometerically. Changes in absorption patterns of dye caused by surfactants and solvents were quantified in terms of dye–surfactant ratio (n _D/n _S) and solvent water partition coefficients (P), respectively. Multiple residence sites have been suggested for dye molecules within micelles, based on shifts in azo-hydrazone tautomeric equilibrium. Micelle–water partition coefficients were used to evaluate the influence of dye on critical micelle concentration of CTAB and SDS. At same micelle concentration, M, the relative solubility of NAB was greater in cationic surfactant CTAB than in anionic surfactant SDS.     

Surfactant effect on electrochemical-induced synthesis of α-Ni(OH)2

Nickel hydroxide films were electrosynthesized in the presence of different diluted surfactant solutions by galvanostatic electroprecipitation. Lamellar α-Ni(OH)₂ films are obtained using cationic surfactant cetyltrimethylammonium bromide (CTAB), anionic surfactant sodium dodecyl sulfate (SDS), and also neutral surfactant Tween® 80. The films were structurally and morphologically characterized by X-ray diffraction, thermal gravimetric analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy, and electrochemically by cyclic voltammetry and electrochemical quartz crystal microbalance (EQCM). The results evidenced that SDS remains intercalated between the lamellae of α-Ni(OH)₂. Albeit the presence of CTAB and Tween® 80, it was noticed in FTIR spectra that the surfactants did not intercalate. The morphology was affected by the presence of different surfactants. All studied surfactants displaced the oxidation potential (E _O) of Ni²⁺/Ni³⁺ process to less positive values. Also, the presence of surfactants improved the electrode charge efficiency and the charge response for the same number of moles of nickel ions deposited. The ratio of the charge and frequency change is 4.4 times bigger for films deposited with SDS when compared with pure α-Ni(OH)₂ films.     

Spectrophotometric study of interaction and solubilization of procaine hydrochloride in micellar systems

The interaction of Procaine hydrochloride (PC) with cationic, anionic and non-ionic surfactants; cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS) and triton X-100, were investigated. The effect of ionic and non-ionic micelles on solubilization of Procaine in aqueous micellar solution of SDS, CTAB and triton X-100 were studied at pH 6.8 and 29°C using absorption spectrophotometry. By using pseudo-phase model, the partition coefficient between the bulk water and micelles, K_x, was calculated. The results showed that the micelles of CTAB enhanced the solubility of Procaine higher than SDS micelles (K_x = 96 and 166 for SDS and CTAB micelles, respectively) but triton X-100 did not enhanced the solubility of drug because of weak interaction with Procaine. From the resulting binding constant for Procaine-ionic surfactants interactions (K_b = 175 and 128 for SDS and CTAB surfactants, respectively), it was concluded that both electrostatic and hydrophobic interactions affect the interaction of surfactants with cationic procaine. Electrostatic interactions have a great role in the binding and consequently distribution of Procaine in micelle/water phases. These interactions for anionic surfactant (SDS) are higher than for cationic surfactant (CTAB). Gibbs free energy of binding and distribution of procaine between the bulk water and studied surfactant micelles were calculated.      

Isothermal titration calorimetry and dynamic light scattering studies of interactions between gemini surfactants of different structure and Pluronic block copolymers

The interactions between triblock copolymers of poly(ethylene oxide) and poly(propylene oxide), P103 and F108, EO(n)PO(m)EO(n), m=56 and n=17 and 132, respectively, and m-s-m type gemini surfactants, m=8, 10, 12, and 18, and s = 3, 6, 12, and 16, have been studied in aqueous solution using isothermal titration calorimetry and dynamic light scattering techniques. The enthalpograms of F108 as a function of surfactant concentration show one broad peak at polymer concentrations C(p) < or = 0.50 wt%, below the cmc of the copolymer at 25 degrees C. It is attributed to interactions between the surfactant and the triblock copolymer monomer. DLS results show hydrodynamic radii (R(h)) initially consistent with copolymer monomers that change to values consistent with gemini surfactant micelles as the surfactant concentration is increased. In P103 solutions at C(p) > or = 0.05 wt%, two peaks appear in the enthalpograms, and they are attributed to the interactions between the gemini surfactant and the micelle or monomer forms of the copolymer. An origin-based nonlinear fitting program was employed to deconvolute the two peaks and to obtain estimates of peak properties. An estimate of the fraction of copolymer in aggregated form was also obtained. The enthalpy change due to interactions between the surfactants and P103 aggregates is very large compared to values obtained for traditional surfactants. This suggests that extensive reorganization of copolymer aggregates and surrounding solvent occurs during the interaction. DLS results for the P103 systems containing C(p) > or = 0.05% show evidence of very large aggregates in solution, likely P103 micelle clusters. The transitions observed in the hydrodynamic radii are consistent with a breakdown of micelle clusters with addition of gemini surfactant, followed by mixed micelle formation and/or deaggregation into monomer P103. This is followed by interactions similar to those typically observed in surfactant-nonionic polymer systems. Mechanisms for the interaction and the observed structural changes are discussed.     

Synthesis and micelle formation of triblock copolymers of poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) in aqueous solution

Amphiphilic triblock copolymers of poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) (PMMA-b-PEO-b-PMMA) with well-defined structure were synthesized via atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) initiated by the PEO macroinitiator. The macroinitiator and triblock copolymer with different PMMA and/or PEO block lengths were characterized with ¹H and ¹³C NMR and gel permeation chromatography (GPC). The micelle formed by these triblock copolymers in aqueous solutions was detected by fluorescence excitation and emission spectra of pyrene probe. The critical micelle concentration (CMC) ranged from 0.0019 to 0.016 mg/mL and increased with increasing PMMA block length, while the PEO block length had less effect on the CMC. The partition constant K_v for pyrene in the micelle and in aqueous solution was about 10⁵. The triblock copolymer appeared to form the micelles with hydrophobic PMMA core and hydrophilic PEO loop chain corona. The hydrodynamic radius R_h,app of the micelle measured with dynamic light scattering (DLS) ranged from 17.3 to 24.0 nm and increased with increasing PEO block length to form thicker corona. The spherical shape of the micelle of the triblock copolymers was observed with an atomic force microscope (AFM). Increasing hydrophobic PMMA block length effectively promoted the micelle formation in aqueous solutions, but the micelles were stable even only with short PMMA blocks.     

Micellar effects on the electrochemistry of dopamine and its selective detection in the presence of ascorbic acid

The electrochemistry of dopamine (3-hydroxytyramine) was studied by cyclic voltammetry at a glassy carbon electrode in the presence of cetyltrimethylammonium bromide (CTAB) and sodium dodecyl sulfate (SDS) micelles at different pH. The anodic peak potential (E(pa)) and peak current (I(pa)) were found to be remarkably dependent on the charge and the concentration of the surfactant. The E(pa) and I(pa) change abruptly around the critical micellar concentration (CMC) of the surfactants and reach a plateau above the CMC. The E(pa) at the plateau shifts to more positive values in the cationic CTAB micellar solution, e.g. from 180 mV vs SCE in aqueous solution at pH 6.8 to 410 mV in CTAB micelle, whilst it shifts to less positive values in the anionic SDS micellar solution, e.g. 150 mV at pH 6.8. Therefore, the overlapped anodic peaks of dopamine and ascorbic acid in the mixture of the two compounds in aqueous solutions can be separated in CTAB micelles since the micelle shifts the E(pa) of ascorbic acid to less positive values. The two peaks are separated by ca. 400 mV at pH 6.8 in CTAB micelle, hence dopamine can be determined in the presence of 100 times excess of ascorbic acid. In SDS micelle and in the presence of ascorbic acid, the I(pa) of dopamine is greatly enhanced due to the catalytic oxidation of the latter that enables quantitative determination of both compounds.