A review on tough and sticky hydrogels

In this review, we survey recent literature (2009–2013) on hydrogels that are mechanically tough and adhesive. The impact of published work and trends in the field are examined. We focus on design concepts, new materials, structures related to mechanical performance and adhesion properties. Besides hydrogels made of individual polymers, concepts developed to toughen hydrogels include interpenetrating and double networks, slide ring polymer gels, topological hydrogels, ionically cross-linked copolymer gels, nanocomposite polymer hydrogels, self-assembled microcomposite hydrogels, and combinations thereof. Hydrogels that are adhesive in addition to tough are also discussed. Adhesive properties, especially wet adhesion of hydrogels, are rare but needed for a variety of general technologies. Some of the most promising industrial applications are found in the areas of sensor and actuator technology, microfluidics, drug delivery and biomedical devices. The most recent accomplishments and creative approaches to making tough and sticky hydrogels are highlighted. This review concludes with perspectives for future directions, challenges and opportunities in a continuously changing world.     

PVA-clay nanocomposite hydrogels for wound dressing

Polymer gels as soft biomaterials have found diverse applications in biomedical field, e.g. in management and care of wound as wound dressing.The recent researches on nanocomposite materials have shown that some properties of polymers and gels significantly improve by adding organoclay into polymeric matrix. In this work, in order to obtain wound dressing with better properties, nanocomposite hydrogel wound dressing was prepared using combination of polyvinyl alcohol hydogel and organoclay, i.e. Na-montmorillonite, via the freezing-thawing method. The effect of organoclay quantity on the structural, swelling, physical and mechanical properties of nanocomposite hydrogel wound dressing was investigated. The results showed that the nanocomposite hydrogels could meet the essential requirements for the reasonable wound dressing with some desirable characteristics such as relatively good swelling, appreciated vapour transmission rate, excellent barrierity against microbe penetration and mechanical properties. The results also indicated that the quantity of the clay added to the nanocomposite hydrogel is the key factor in obtaining such suitable properties required for wound dressing.     

Effect of montmorillonite on gelation and swelling behavior of sulfonated polyacrylamide nanocomposite hydrogels in electrolyte solutions

Nanocomposite hydrogels were prepared by cross-linking of aqueous solutions of sulfonated polyacrylamide/sodium montmorillonite with chromium triacetate. The gelation process and effects of clay content and ionic strength on swelling behavior were investigated. X-ray diffraction patterns indicated that exfoliated type of microstructure was formed. Study of the gelation behavior using dynamic rheometery showed that the limiting storage modulus of the nanocomposite (NC) gels decreased with increasing clay content up to 1000 ppm, but it increased by further increase of Na⁺-montmorillonite concentration. It was also found that with increasing the clay content, the viscous energy dissipation properties of the nanocomposite gels increased. The swelling ratio of nanocomposite gels in tap water decreased as the concentration of the clay increased. However, nanocomposite gels showed higher resistance against syneresis in electrolyte solutions as compared with unfilled gels. Therefore, they are potentially good candidates for enhanced oil recovery applications.     

Stimuli-responsive nanocomposite gels

A new class of polymer hydrogels, nanocomposite hydrogels (NC gels), consisting of a unique organic (polymer)/inorganic (clay) network structure, was synthesized by in situ free-radical polymerization in the presence of exfoliated clay nanoparticles in an aqueous system. The resulting NC gels overcame most of the disadvantages associated with chemically cross-linked hydrogels, such as mechanical fragility, structural heterogeneity, and slow de-swelling rate. By using thermo-sensitive poly(N-isopropylacrylamide) (PNIPA) as a constituent polymer, NC gels with remarkable mechanical, optical, and swelling properties as well as thermo-sensitivity were obtained. The various properties of NC gels, such as transparency, gel volume, cell culturing, and surface friction changed significantly in response to the temperature and surrounding conditions. All the excellent properties and new stimuli-responsive characteristics of NC gels are attributed to the unique PNIPA/clay network structure. The thermo-sensitivities and the transition temperature can largely be controlled by varying the clay content and by the addition of solutes.     

PREPARATION AND PROPERTIES OF CLAY/POLY（N-ISOPROPYLACRYLAMIDE-co-A CRYL AMIDE） NANOCOMPOSITE HYDROGELS

A series of clay/poly(N-isopropylacrylamide-co-acrylamide) nanocomposite hydrogels (S-N-M gels) have been successfully prepared by in situ polymerization. The mechanical properties,swelling behavior of S-N-M gels and the transparency changes during polymerization of S-N-M gels have been systematically investigated. Compared to traditional hydrogeb, S-N-M gels show excellent tensile properties and their swelling ratio increases with increasing acrylamide (AAm) content. The results of stress relaxation indicate that the stress loss decreases with increasing AAm content. It was surprisingly found that the transparency during all S-N-M gel synthesis changes abruptly, and the changes become more abrupt with increasing N-isopropylacrylamide content. It was concluded that the fact may be related to the hydrophilicity of copolymers. The weaker the hydrophilicity of copolymer, the more apparent the transparency change during S-N-M gels polymerization. We believe the relationship between hydrophilicity of copolymer and transparency changes will help to design novel nanocomposite hydrogels.     

PREPARATION AND PROPERTIES OF CLAY/POLY(N-ISOPROPYLACRYLAMIDE-co-ACRYL AMIDE)NANOCOMPOSITE HYDROGELS

Polymer hydrogels as a kind of soft materials have attracted increasing scientific and technological interest in past several decades. These materials have been applied widely in many fields [1], such as molecular filter [2,3], superabsorbent [4], and contact lenses [5] etc. However, synthetic polymeric hydrogels are seldom used as mechanical devices due to the lack of mechanical strength. Therefore, it is very imperative to improve their mechanical properties for wider use of polymeric hydrog…     

Physics of engineered protein hydrogels

Artificially engineered proteins and synthetic polypeptides have attracted widespread interest as building blocks for polymer hydrogels. The biophysical properties of the proteins, such as molecular recognition abilities, folded chain structures, and sequence-dependent thermodynamic behavior, enable advances in functional, responsive, and tunable gels. This review discusses the design of polymer hydrogels that incorporate protein domains, highlighting new challenges in polymer physics that are presented by this emerging class of materials. Five types of engineered protein hydrogels are discussed: (a) physically associating protein polymer gels, (b) amorphous artificially engineered protein networks, (c) engineered proteins with crystalline domains, (d) stretchable protein tertiary structures in gels, and (e) protein gels with biological recognition properties. The physics of the protein component and the physical properties of the resulting hydrogels are summarized, illustrating how advances in understanding these systems are leading to exciting novel biofunctional hydrogels. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Controlled Deformation of Soft Nanogel Particles Generates Artificial Biominerals with Ordered Internal Structure

Biominerals can exhibit exceptional mechanical properties owing to their hierarchically-ordered organic/inorganic nanocomposite structure. However, synthetic routes to oriented artificial biominerals of comparable complexity remain a formidable technical challenge. Herein we design a series of soft, deformable nanogels that are employed as particulate additives to prepare nanogel@calcite nanocomposite crystals. Remarkably, such nanogels undergo a significant morphological change—from spherical to pseudo-hemispherical—depending on their degree of cross-linking. This deformation occurs normal to the growth direction of the (104) face of the calcite and the underlying occlusion mechanism is revealed by in situ atomic force microscopy studies. This model system provides new mechanistic insights regarding the formation of oriented structures during biomineralization and offers new avenues for the design of synthetic nanocomposites comprising aligned anisotropic nanoparticles.     

Synthesis of Upconverting Hydrogel Nanocomposites Using Thiol‐Ene Click Chemistry: Template for the Formation of Dendrimer‐Like Gold Nanoparticle Assemblies

The synthesis of upconverting hydrogel nanocomposites by base‐catalyzed thiol‐ene click reaction between 10‐undecenoic acid capped Yb³⁺/Er³⁺‐doped NaYF₄ nanoparticles and pentaerythritol tetrakis(3‐mercaptopropionate) (PETMP) as tetrathiol monomer is reported. This synthetic strategy for nanocomposite gels is quite different from works where usually the preformed gels are mixed with the nanoparticles. Developing nanocomposites by surface modification of capping ligands would allow tuning and controlling of the separation of the nanoparticles inside the gel network. The hydrogel nanocomposites prepared by thiol‐ene click reaction show strong enhancement in luminescence intensity compared to 10‐undecenoic acid‐capped Yb³⁺/Er³⁺‐doped NaYF₄ nanoparticles through the upconversion process (under 980 nm laser excitation). The hydrogel nanocomposites display strong swelling characteristics in water resulting in porous structures. Interestingly, the resulting nanocomposite gels act as templates for the synthesis of dendrimer‐like Au nanostructures when HAuCl₄ is reduced in the presence of the nanocomposite gels.     

可拉伸超韧水凝胶的制备和应用

综述了可拉伸超韧水凝胶的设计原理及其在组织工程和柔性电子器件领域的应用. 通过将网络结构层次、 化学结构、 增韧机制与宏观力学性能相结合, 重点讨论了单网络水凝胶、 双网络水凝胶、 纳米复合水凝胶及其它水凝胶等可拉伸超韧水凝胶的研究进展, 并总结和展望了新思路和新方向.     

电场敏感性聚(丙烯酸-co-丙烯酸甲酯)凝胶的合成和性能

以丙烯酸、丙烯酸甲酯为单体,亚甲基双丙烯酰胺为交联剂,过硫酸铵为引发剂,N,N-四甲基乙二胺为促进剂,合成了一系列电场敏感性凝胶.研究了氯化钠溶液,pH缓冲溶液对凝胶平衡溶胀度的影响,并测定了所得电场敏感性凝胶在电场作用下的脱水行为.研究结果表明,所得凝胶具有很好的电场敏感性.此外,初步讨论了该类电场敏感性凝胶的电致收缩机理.     

Liquid-crystalline physical gels

Liquid-crystalline (LC) physical gels are a new class of dynamically functional materials consisting of liquid crystals and fibrous aggregates of molecules that are called "gelators". Liquid-crystalline physical gels, which are macroscopically soft solids, exhibit induced or enhanced electro-optical, photochemical, electronic properties due to the combination of two components that form phase-separated structures. In this tutorial review, we describe the materials design and structure-property relationships of the LC physical gels. The introduction of self-assembled fibers into nematic liquid crystals leads to faster responses in twisted nematic (TN) mode and high contrast switching in light scattering mode. Furthermore, the LC physical gels can be exploited as a new type of materials for electro-optical memory. This function is achieved by the control of reversible aggregation processes of gelators under electric fields in nematic liquid crystals. Electronic properties such as hole mobilities are improved by the introduction of fibrous aggregates into triphenylene-based columnar liquid crystals. The incorporation of photochromic azobenzenes or electroactive tetrathiafulvalenes into the chemical structures of gelators leads to the preparation of ordered functional materials.     

Novel polymer nanocomposite hydrogel with natural clay nanotubes

Polymer nanocomposite gels (NC gels), a kind of typical soft materials, can be synthesized through free-radical polymerization of water-soluble monomers in the presence of nanoclay in aqueous system. Here, novel natural tube-like nanoparticles, halloysite nanotubes (HNTs), are firstly used as multifunctional cross-linkers for polyacrylamide (PAAm) to form a new type of organic/inorganic hybrid hydrogels. Significant improvements in mechanical properties of the PAAm-HNTs NC gels are found by the addition of HNTs as shown by the static mechanical testing and dynamic viscoelasticity measurement. HNTs are uniformly dispersed in the NC gels from the morphological result. HNTs can be intercalated by PAAm chains as observed by the X-ray diffraction result. Hydrogen bonding interactions between HNTs and PAAm are confirmed by the infrared spectroscopy and X-ray photoelectron spectroscopy. The maximum equilibrium degree of swelling (EDS) for the NC gel is 4000% and the EDS decreases with the concentration of clay nanotubes. The present work provides a novel routine for preparing NC gels using “green” one-dimensional nanoparticle. The prepared NC gels have promising application in biomedical areas due to the superior mechanical properties of the gels and good biocompatibility of HNTs.     

Noncovalent binding interactions of polyacrylamide and clay in nanocomposite hydrogels

The interactions between organic and inorganic components in pregel solution for polyacrylamide (PAAm)/clay nanocomposite hydrogels (NC gels) and in prepared NC gels are investigated. Besides, a kind of self‐crosslinked PAAm gels with excellent mechanical properties is fabricated in the absence of any cross‐linking agents, the hydrogen bonding interactions among PAAm chains are acted as the cross‐linking force. It is revealed that the binding interactions of PAAm and clay in NC gels are owing to the noncovalent interactions between amide groups on PAAm chains and clay platelets, which afford the cross‐linking force for NC gels network formation. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

醇溶剂交换对聚合物/黏土纳米复合水凝胶的性能改进及结构表征

采用原位自由基聚合,制备了聚N,N-二甲基丙烯酰胺(PDMAA)/黏土(clay)纳米复合水凝胶(D-NCgel),黏土在体系结构中充当多官能团交联点的作用.考察了D-NC gel中溶剂水被交换为醇溶剂时,凝胶结构稳定性,溶胀特性,以及机械性能的变化.D-NC gel在醇溶剂中仍能保持完整的三维网络结构,体系没有瓦解.而且,D-NC gel在醇溶剂中表现出依赖于醇溶剂种类的溶剂交换和溶胀行为.在甲醇中,凝胶溶胀度呈现单调增长,但是在其它醇溶剂,如乙醇、1-丙醇或1-丁醇中,凝胶表现出先收缩后溶胀的特殊溶胀行为.通过在醇溶剂中先溶胀后干燥的方法,制备具有优异机械性能的醇溶剂纳米复合凝胶.与D-NC5 gel相比,D-NC5甲醇凝胶其拉伸力学强度提高了67%(从155 kPa增加到259 kPa),拉伸模量提高了49%(从7.5 kPa增加到11.2kPa).基于凝胶在醇水溶剂中结构可逆性讨论的基础上,探讨了醇溶剂对D-NC水凝胶的改性机理.     

Nanocomposite hydrogels based on carbon dots and polymers

Nanocomposite hydrogels based on carbon dots(CDs) and polymers have emerged as new materials with integrated properties of individual components,leading to their important applications in the field of soft nanomaterials.This perspective highlights recent advances in the development of nanocomposite hydrogels from CDs and polymers.We review the preparation methods of nanocomposite hydrogels based on CDs and polymers,and emerging applications of these nanocomposite hydrogels such as environmental remediation,energy storage,sensing,drug delivery and bioimaging.We conclude with the discussion of new research directions in the development of new type of nanocomposite hydrogels based on CDs and polymers.     

Magnetic applications of polymer gels

In this paper we report results of both, material preparation and magnetic characterisation, on CoFe₂O₄ particles of nanometric size formed by in‐situ precipitation within polymer gels. The size of the particles was controlled within a very narrow volume distribution and its average value was shifted from 2 to 10 nm. The existence of nanoparticles showing, at room temperature, coercive field values between 500 and 900 Oe and saturation magnetisations of about 500 emu/cm³, suggest to use these systems to get magnetic recording media with ultra high density. Poly(vinyl alcohol) (PVA) and Polystyrene (PS) films were prepared from this nanocomposite material. After a magnetic field treatment nanoparticles within the PVA films are free to rotate in response to an applied magnetic field. This PVA based nanocomposite film portends a new class of magnetic material with very little or no electrical and magnetic loss.     

Magneto-responsive nanocomposites: Preparation and integration of magnetic nanoparticles into films,capsules, and gels

This review reports on the latest developments in the field of magnetic nanocomposites, with a special focus on the potentials introduced by the incorporation of magnetic nanoparticles into polymer and supramolecular matrices. The general notions and the state of the art of nanocomposite materials are summarized and the results reported in the literature over the last decade on magnetically responsive films, capsules and gels are reviewed. The most promising concepts that have inspired the design of magneto-responsive nanocomposites are illustrated through remarkable examples where the integration of magnetic nanoparticles into organic architectures has successfully taken to the development of responsive multifunctional materials.     

Polyoxometalates as Potential Next‐Generation Metallodrugs in the Combat Against Cancer

Polyoxometalates (POMs) are an emerging class of inorganic metal oxides, which over the last decades demonstrated promising biological activities by the virtue of their great diversity in structures and properties. They possess high potential for the inhibition of various tumor types; however, their unspecific interactions with biomolecules and toxicity impede their clinical usage. The current focus of the field of biologically active POMs lies on organically functionalized and POM‐based nanocomposite structures as these hybrids show enhanced anticancer activity and significantly reduced toxicity towards normal cells in comparison to unmodified POMs. Although the antitumor activity of POMs is well documented, their mechanisms of action are still not well understood. In this Review, an overview is given of the cytotoxic effects of POMs with a special focus on POM‐based hybrid and nanocomposite structures. Furthermore, we aim to provide proposed mode of actions and to identify molecular targets. POMs are expected to develop into the next generation of anticancer drugs that selectively target cancer cells while sparing healthy cells.     

Organic nanocrystals grown in sol-gel matrices: new hybrid organic-inorganic materials for optics

We have developed a simple and generic preparation of stable organic nanocry stals grown in gel-glass matrices. The synthesis of these hybrid organic-inorganic materials is based on the confined nucleation and growth of organic phases in the pores of dense gels. For bulk nanocomposite samples, narrow size distributions of particles (10–20 nm in diameter) are obtained. We have extended this method to the preparation of organic nanocrystals embedded in sol-gel thin films prepared by spin-coating. For all these nanocomposite materials, we have significantly increased the dye stability and obtained promising optical properties: luminescence, non-linear optical properties or photochromism. Moreover, we have also demonstrated basic working principles of a new type of fluorescent nanosensor through the preparation of organic luminescent nanocrystals grown in silicate films.