Trace metal analyses in honey samples from selected countries. A potential use in bio-monitoring

Honey is a sweet product made by bees using nectar from flowers. Concentrations of Ca, K, Mg, Fe, Zn, Mn, Cu, Pb and Cd were determined in 13 honey samples from the selected regions around the world. Levels of Ca, Mg, Cu, Fe, Zn and Mn were measured using flame atomic absorption spectrometry (FAAS). Potassium concentration was determined via flame photometry. Concentrations of Cd and Pb were determined using the electrothermal technique (ETAAS). It was estimated that the examined samples of honey from Greece, Turkey, Spain, Poland, Mexico, Argentina and Italy were of good quality in terms of metal concentrations (compliant with the norms referring to food products – WHO, Fifty-third Report of the joint FAO/WHO Expert Committee on Food Additives; Technical Report Series 776, Geneva), although the analysed samples were not free of heavy metals. The concentrations of the elements in the honey samples ranged from 2.38 to 9.31 μg · g^?1 for Zn, from 3.86 to 35.10 μg · g^?1 for Fe, from 0.19 to 21.64 μg · g^?1 for Mn, from 49.53 to 1006.90 μg · g^?1 for Ca, from 388.25 to 4761.50 μg · g^?1 for K and from 0.20 to 1.53 μg · g^?1 for Cu and regarding heavy metals from 0.11 to 2.78 μg · g^?1 for Pb and from 0.02 to 0.44 μg · g^?1 for Cd. According to these results it was found that the concentrations of heavy metals in the honey samples (except for alfalfa honey and eucalyptus honey from Italy) were under the acceptable limits for foods set out by the FAO/WHO. It was confirmed that the application of chemometric tools supports the extraction of significant information from analytical data, even though the availability of samples is not fully sufficient (this problem is often encountered in environmental analyses).     

Determination of Heavy Metal Content in Wild-Edible Mushroom from Jordan

The heavy metal content was investigated for six mushroom species native to Jordan. Metal (Cu, Pb, Cd, Fe, Zn, Mn, Ni, and Co) content in soil substrate and their relation to metal concentrations in mushroom and underlying soil were determined by flame and graphite furnace atomic absorption spectrometry. Mushroom species and soil were collected from different places in Jordan. The highest Cu level was 51.84 µg g^?1 for the species Lepista nuda; whereas, the lowest Cu level was found to be 18.51 µg g^?1 in Calvatia utriformis. Among the wild mushrooms, the highest Pb level was found as 4.81 µg g^?1 in Bovista plumbea, whereas the lowest Pb concentration was 2.01 µg g^?1 in Calvatia utriformis. The highest Cd level was determined as 1.9 µg g^?1 for Lepista nuda, whereas the lowest Cd level was 0.58 µg g^?1 for the species of Polyporus frondosus. The highest Zn level was 58.77 µg g^?1 for the species of Lepista nuda and the lowest Zn concentration was found 35.98 µg g^?1 in Calvatia utriformis. The highest Fe level was found as 317 µg g^?1 in Lepista nuda, whereas the lowest Fe concentration was 211.7 µg g^?1 in Calvatia utriformis. The highest Mn content was 36.55 µg g^?1 for Russula delica, whereas the lowest Mn level was 24.5 µg g^?1 for the species Bovista plumbea. The highest Ni content was found as 12.65 µg g^?1 for Russula delica, whereas the lowest Ni level was 0.17 µg g^?1 for Bovista plumbea. The highest Co content in the tested mushrooms was found as 3.5 µg g^?1 for the species of Agaricus bisporus, whereas the lowest Co level was 0.85 µg g^?1 for Polyporus frondosus. The results indicated that, in general, heavy metal contents in all mushroom species were lower than the underlying soil substrates except for some mushroom species.     

Study by fluorescence of calix[4]arenes bearing heterocycles with divalent metals: highly selective detection of Pb2+

The present work describes a study of complexation efficiency and selectivity of calix[4]arenes bearing benzoimidazolyl, benzothiazolyl, and benzoxazolyl heterocycles (5–7) towards several selected metal ions using fluorescence and UV–Vis spectroscopy. The binding ability of calixarene derivatives 5–7 toward selected divalent metal ions such as Ca, Cd, Pb, Ni, Mg, Mn, Co, Fe and Zn has been investigated by fluorescence spectroscopic techniques. Fluorescent chemosensor ability of three calixarene derivatives was highly selective for Pb (II) in contrast with other divalent metal studied. The highest association constant corresponds to benzoxazolyl calixarene derivative 7, with a K_a of (1.37 ± 0.06) × 10⁴ mol^?1 L and detection limit for lead of 1.14 ± 0.05 mg L^?1 in methanol being acceptable for the recognition of this metal at micromolar concentrations.     

Use of Surfactant as Mobile Phase Additive in LC for Simultaneous Determination of Metal-Pyrrolidine Dithiocarbamate Chelates

Reversed phase liquid chromatography using UV detection was developed for the simultaneous analysis of Hg(II), Pb(II), Cd(II), Ni(II), Fe(III) and V(V) ions after their complexation with pyrrolidine-dithiocarbamate (PDC). Optimum chromatographic conditions were a μ-Bondapak C₁₈ column and an isocratic mobile phase consisting of 40 mmol L^?1 SDS, 34 mmol L^?1 TBABr and 68% acetonitrile in 10 mmol L^?1 phosphate buffer pH 3.5. The separation of six PDC complexes was achieved within 8 min. Analytical performances and method validation were investigated. The detection limits ranged from 0.16 μg L^?1(Fe(III)) to 5.40 μg L^?1(Pb(II)). Recoveries obtained for all the studied samples including tap water, whole blood and vegetables were 72–98%. The results obtained from the proposed method were not significantly different compared to those obtained from atomic absorption spectrometry (P = 0.05).     

Cold vapor generation of Zn based on dielectric barrier discharge induced plasma chemical process for the determination of water samples by atomic fluorescence spectrometry

A new plasma chemical vapor generation (plasma-CVG) method for Zn was developed by dielectric barrier discharge (DBD). The dissolved Zn ions was readily converted to volatile species by DBD plasma in the presence of hydrogen and then, the generated Zn vapor, Zn⁰, was detected by cold vapor atomic fluorescence spectrometry (AFS). It eliminated the use of unstable tetrahydroborate-reducing reagent and high-purity acids. The operating conditions for the DBD plasma-CVG system were optimized for the efficient vapor generation of Zn. In addition, possible interferences from coexisting ions on the plasma-CVG of Zn were also examined. No appreciable matrix interference was found from most of the examined ions at concentration of 1 mg L^?1. However, severe depression of the Zn vapor generation efficiency was observed in the presence of ions at 10 mg L^?1. Under the optimal conditions, the limit of detection (LOD) was calculated to be 0.2 μg L^?1; good repeatability (relative standard deviation (RSD)?=?2.6 %, n?=?11) was obtained for a 20 Zn μg L^?1 standard. The accuracy of the proposed method was validated though analysis of Zn in reference material of simulated natural water sample GSB07-1184-2000 and the determined result was in good agreement with the reference value. The proposed method has also been successfully applied to the determination of Zn in Changjiang River water, Wuhan East Lake water, and Wuhan tap water samples. It provides an alternative green vapor generation method for Zn. Figure

?     

Determination of chlorobenzenes in water samples based on fully automated microextraction by packed sorbent coupled with programmed temperature vaporization–gas chromatography–mass spectrometry

A fully automated method consisting of microextraction by packed sorbent (MEPS) coupled directly to programmed temperature vaporizer–gas chromatography–mass spectrometry (PTV–GC–MS) has been developed to determine the 12 chlorobenzene congeners (chlorobenzene; 1,2-, 1,3-, and 1,4-dichlorobenzene; 1,2,3-, 1,2,4-, and 1,3,5-trichlorobenzene; 1,2,3,4-, 1,2,3,5-, and 1,2,4,5-tetrachlorobenzene; pentachlorobenzene; and hexachlorobenzene) in water samples. The effects of the variables on MEPS extraction, using a C18 sorbent, and the instrumental PTV conditions were studied. The internal standard 1,4-dichlorobenzene d4 was used as a surrogate. The proposed method afforded good reproducibility, with relative standard deviations (RSD %) lower than 12 %. The limits of detection varied between 0.0003 μg L^?1 for 1,2,3,4-tetrachlorobenzene and 0.07 μg L^?1 for 1,3- and 1,4-dichlorobenzene, while those of quantification varied between 0.001 μg L^?1 and 0.2 μg L^?1 for the same compounds. Accuracy of the proposed method was confirmed by applying it to the determination of chlorobenzenes in different spiked water samples, including river, reservoir, and effluent wastewater.

Ionic liquid-based dispersive liquid–liquid microextraction for the separation and preconcentration of lead in water samples prior to FAAS determination without chelating agent

In the present study, an environment-friendly sample preparation method termed ionic liquid-based dispersive liquid–liquid microextraction combined with flame atomic absorption spectrometry has been developed for the determination of Pb(II) ion in water samples prior to flame atomic absorption spectrometry determination. In this method, ionic liquid was used as an extraction solvent instead of the organic solvent used in the conventional dispersive liquid–liquid microextraction (DLLME) assay, and there is no need for a chelating agent. Several variables that may affect extraction efficiencies, including pH, the volume of ionic liquid, the type and volume of disperser solvent, salt addition, and the time for centrifugation and extraction were studied and optimised. Under the optimised conditions, the calibration curve exhibited linearity over the range of 20.0–1000.0 μg L^?1. The enrichment factor and the limit of detection based on 3S_b/m were 35.0 and 5.9 μg L^?1, respectively. Seven replicate determination of a solution containing of 100.0 μg L^?1 Pb(II) ions gave a relative standard deviation of ±2.1%. Finally, the feasibility of the proposed method for Pb(II) determination was assessed by the analysis of certi?ed reference material and various water samples and the satisfactory results were obtained.     

In vitro studies of carbon fiber microbiosensor for dopamine neurotransmitter supported by copper-graphene oxide composite

A composite was prepared from copper and graphene oxide (Cu-GO) by in-situ chemical reduction of a mixture containing GO and Cu(II) ions with potassium borohydride. The morphology and structure of the composite were confirmed by various physicochemical techniques. The materials were used in a tyrosinase-based microbiosensor where the enzyme is immobilized in a biocompatible matrix consisting of poly(ortho-phenylene diamine) and Cu-GO. The composite was deposited on the surface of an 8-μm thick carbon fiber microelectrode. The role of each component in the sensing layer was systematically investigated with respect to the analytical performance of the system. In its optimal configuration, the biosensor demonstrated (a) a sensitivity of 6.1?±?3 nA mM^-1 dopamine (DA), (b) a linear response to DA (with a Michaelis-Menten constant of 0.29?±?0.03 mM), (c) good selectivity over ascorbic acid and uric acid, and (d) a high blocking capacity (112.2?±?2 mM) for ascorbic acid.

Anodic Stripping Voltammetry Determination of Pb(II) and Cd(II) at a Bismuth/Poly(aniline) Film Electrode

Abstract

A novel voltammetric method—anodic—using a bismuth/poly(aniline) film electrode has been developed for simultaneous measurement of Pb(II) and Cd(II) at low µg L^?1 concentration levels by stripping voltammetry. The results confirmed that the bismuth/poly(aniline) film electrode offered high‐quality stripping performance compared with the bismuth film electrode. Well‐defined sharp stripping peaks were observed for Pb(II) and Cd(II), along with an extremely low baseline. The detection limits of Pb(II) and Cd(II) are 1.03 µg L^?1 and 1.48 µg L^?1, respectively. The bismuth/poly (aniline) electrode has been applied to the determination of Pb(II) in tap water samples with satisfactory results.     

Pulverized Banana Peel as an Economical Sorbent for the Preconcentration of Metals

A procedure for the determination of trace levels of Cd, Co, Cr, Fe, Mn, Ni, and Pb by flame atomic absorption spectrometry using a column preconcentration system is described in which the metals were adsorbed on pulverized banana peel, an economically and environmentally acceptable sorbent. In the optimization procedure, five variables (sample pH, mass of biosorbent, type of eluent, sample flow rate, and volume) were optimized and the capacity of the biosorbent was established. Under the optimized conditions, the detection limits of the method were 2.4, 27.0, 49.4, 31.1, 6.7, 29.6, and 46.2 µg L^?1 for Cd, Co, Cr, Fe, Mn, Ni, and Pb, respectively. The precision, expressed as relative standard deviation, was less than 4% based on twelve measurements. The recoveries were 81.1% (Cd), 91.4% (Co), 87.2% (Cr), 90.1% (Fe), 88.0% (Mn), 94.1% (Ni), and 93.2% (Pb) under the optimum conditions (pH; 9, sample flow rate; 3 mL min^?1, mass of biosorbent; 200 mg; eluent; 1 mol L^?1 nitric acid, preconcentration factor; 10). The sorption capacity of pulverized banana peel was 15.12, 28.85, 32.70, 30.44, 30.94, 28.97, and 8.21 µmol per gram of adsorbent for Cd, Co, Cr, Fe, Mn, Ni, and Pb, respectively.     

Preparation, characterization, and application of a new thiol-functionalized ionic liquid for highly selective extraction of Cd(II)

A highly selective thiol-functionalized ionic liquid (thiol-FIL) was synthesized and characterized by FT-IR and ESI mass spectroscopy. The capability of thiol-FIL to extract Cd(II), Ni(II), Cr(III) and Pb(II) was evaluated. It is found that thiol-FIL possesses high selectivity for Cd(II), and this has led to a method for determination of Cd(II) by flame atomic absorption spectrometry that is free of interferences by up to a 1,000-fold excess of Na(I), Mg(II), Ca(II), Mn(II), Fe(III), Al(III), Cu(II), Zn(II), Ni(II), Cr(III), Co(II), As(III), Pb(II), and Hg(II). With extraction equilibrium time of 1 min, a good linearity (r = 0.9998) and a detection limit of 0.39 μg?L^?1 were obtained. The precision (RSD) for 11 replicate measurements of 10 μg?L^?1 Cd was 1.6%. The method was validated using certified reference materials. The recoveries of cadmium in spiked real samples ranged from 97% to 102%.     

Determination of reference interval values for inorganic elements in whole blood samples of humans and laboratory animals by X-ray fluorescence spectrometry

Inorganic elements are responsible for essential bodily functions, such as osmotic regulation, cardiac frequency and contractibility, blood clotting and neuromuscular excitability. The determination of inorganic elements in corporeal fluids such as blood, serum, plasma and urine is used as a monitor for a part or the whole organism; their values, then, are compared with reference interval values. In this study, the energy dispersive X-ray fluorescence spectrometry (EDXRF), applying the Fundamental Parameters method, for the determination of inorganic elements in whole blood samples from humans and laboratory animals, was used. Peripheral blood samples were collected and, before coagulation, 100 μL of sample were deposited onto Whatman No. 41 filter paper and dried, using infrared spotlight. The reference interval values for healthy Brazilian population of Na were found to be 1,788–1,826 μg g^?1, of Mg 63–75 μg g^?1, of P 602–676 μg g^?1, of S 1,519–1,718 μg g^?1, of Cl 2,743–2,867 μg g^?1, of K 1,508–1,630 μg g^?1, of Ca 214–228 μg g^?1, of Fe 170–184 μg g^?1, of Cu 4–6 μg g^?1 and of Zn 1–3 μg g^?1. The reference interval values for golden hamster (Mesocricetus auratus) of Na were found to be 1,714–1,819 μg g^?1, Mg 51–79 μg g^?1, P 970–1,080 μg g^?1, S 1,231–1,739 μg g^?1, Cl 2,775–2,865 μg g^?1, of K 1,968–2,248 μg g^?1, of Ca 209–257 μg g^?1, of Fe 145–267 μg g^?1, of Cu 4–6 μg g^?1 and of Zn 3–5 μg g^?1. A comparative study between EDXRF and instrumental neutron activation analysis data was carried out and the results for both techniques are statistically equal (α = 0.05). The results contribute for the establishment of reference interval values for Na, Mg, P, S, Cl, K, Ca, Cu and Zn in the healthy Brazilian population and the referred laboratory animal species.     

Schiff base-functionalised styrofoam resin for preconcentration of metal ions in wastewater and wastewater-irrigated vegetables samples

Polystyrene (PS) was extracted from styrofoam waste and functionalised with schiff base, N,N-bis(salicylidene)cyclohexanediamine (SCHD) through an azo spacer. The resin was characterised and used for preconcentration of Pb(II), Ni(II) and Cd(II) ions prior to their trace determinations by microsample injection system–coupled flame atomic absorption spectrometry (MIS-FAAS). The recoveries of studied metal ions were achieved ≥96.0% with relative standard deviation (RSD) ≤4.5 at optimum parameters: pH 8; resin amount 300 mg; flow rates 3.0 mL min^?1 of sample solution; and 2.0 mL min^?1 of eluent (2.0 mol L^?1 HNO₃). The limits of detection (LODs) and limits of quantification (LOQs) were found to be 0.32, 0.23 and 0.21 and 1.10, 0.78 and 0.69 μg L^?1, respectively, with preconcentration factors (PFs) of 500, 800 and 1000, respectively. The linear ranges of the method were 1–40, 1–25 and 1–20 μg L^?1 for Pb(II), Ni(II) and Cd(II) ions, respectively. The accuracy and validation of the method were evaluated by analysis of certified reference materials (CRMs). The method was successfully applied for preconcentration of studied metal ions in wastewater and wastewater-irrigated vegetable samples.     

Multi-wall carbon nanotubes chemically modified silica microcolumn preconcentration/separation combined with inductively coupled plasma optical emission spectrometry for the determination of trace elements in environmental waters

A novel adsorbent of multi-wall carbon nanotubes (MWCNTs) chemically modified silica (MWCNTs-silica) was synthesised and employed as the adsorbent material for solid-phase extraction (SPE) of trace Zn(II), Cu(II), Cd(II), Cr(III), V(V) and As(V) in environmental water samples followed by inductively coupled plasma optical emission spectrometry detection. This material inherits the advantages of nanomaterial MWCNTs and conventional silica with dual functional groups (–NH₂ and –COOH), and avoid the problem of nanomaterial in SPE, such as high pressure. The factors affecting the separation and preconcentration of target elements such as pH, sample flow rate and volume, eluent concentration and volume were investigated. Under the optimised conditions, the detection limits for Zn(II), Cu(II), Cd(II), Cr(III), V(V) and As(V) were 0.27, 0.11, 0.45, 0.91, 0.55 and 0.67 μg L^?1 with the relative standard deviations of 3.1, 5.9, 4.1, 4.0, 7.3 and 8.6% (c = 10 μg L^?1, n = 7), respectively. The adsorption capacity of MWCNTs-silica was 26.6, 70.0, 13.8, 58.0, 20.0 and 20.0 mg g^?1 for Zn(II), Cu(II), Cd(II), Cr(III), V(V) and As(V), respectively, and the prepared adsorbent could be reused more than 100 times. In order to validate the developed method, two certified reference materials of GSBZ50009-88 and GSBZ 50029-94 environmental waters were analysed and the determined values were in good agreement with the certified values. The developed method has been applied to the determination of trace elements in environmental water samples with satisfactory results.     

Simultaneous Detection of Copper,Lead and Zinc on Tin Film/Gold Nanoparticles/Gold Microelectrode by Square Wave Stripping Voltammetry

In this work, three heavy metals (Cu(II), Pb(II) and Zn(II)) in wide potential window were simultaneously detected on tin film/gold nanoparticles/gold microelectrode (Sn/GNPs/gold microelectrode) by the method of square wave stripping voltammetry. The Sn/GNPs/gold microelectrode was fabricated by in situ plating of a Sn film on a gold nanoparticles (GNPs) modified gold microelectrode. The influence of hydrogen overflow on stripping of Zn(II) on the gold microelectrode was reduced by modification of GNPs, which made the stripping potential of target metals shift positively. The interference of sulfhydryl groups was reduced and the selectivity of the microelectrode was improved due to the addition of Sn in the detection solution. After accumulation at ?1.4 V for 300 s in acetate buffer solution (0.1 mol L^?1, pH 4.5), the Sn/GNPs/gold microelectrode revealed a good linear behavior in the examined concentration ranges from 5 to 500 µg L^?1 for Cu(II) and Pb(II), and from 10 to 500 µg L^?1 for Zn(II), with a limit of detection of 2 µg L^?1 for Cu(II), 3 µg L^?1 for Pb(II) and 5 µg L^?1 for Zn(II) (S/N=3). When compared with a Sb/GNPs/gold microelectrode and a Bi/GNPs/gold microelectrode, the Sn/GNPs/gold microelectrode showed the best stripping performance to Cu(II), Pb(II) and Zn(II). As a new type of environment‐friendly electrode, the Sn/GNPs/gold microelectrode has potential applications for detection of heavy metals.     

A stir foam composed of graphene oxide,poly(ethylene glycol) and natural latex for the extraction of preservatives and antioxidant

A stir foam composed of graphene oxide, poly(ethylene glycol) and natural latex (GO-PEG-NL) was prepared for use in micro-solid phase extraction sorbent of preservative agents and antioxidants from cosmetic products. The extracted analytes were quantified by GC-MS. Under the optimized conditions, the calibration plots are linear in the concentration ranges between 5.0 μg·L^?1 to 1.0 mg·L^?1 for benzoic acid, of 10.0 μg·L^?1 to 1.0 mg·L^?1 for 2-methyl-3-isothiazolinone (MI), and between 1.0 μg·L^?1 and 1.0 mg·L^?1 for both 3-tert-butyl-4-hydroxyanisole (BHA) and 2,6-di-tert-butyl-p-hydroxytoluene (BHT). The LODs are 1.0 μg·L^?1 for benzoic acid, 5.0 μg·L^?1 for MI and 0.5 μg·L^?1 for both BHA and BHT. The stir-foam can be easily prepared, is inexpensive and well reproducible (RSDs <3%, for n?=?6). It can be re-used for up to 12 times after which extraction efficiency has dropped to 90%. The method was successfully applied to the determination of preservatives and antioxidants in cosmetic samples. Recoveries from spiked samples ranged between 94.5?±?2.1% and 99.8?±?1.8%.

Open image in new window

Graphical abstract A stir foam was prepared from graphene oxide, poly(ethylene glycol) and natural latex (GO-PEG-NL) and is shown to be a most viable sorbent for the microextraction of trace amounts of preservative agents and antioxidants from cosmetic products.

     

Determination of Pt and Pd in particles emitted from automobile exhaust catalysts using ion-exchange matrix separation and voltammetric detection

We report on the ion-exchange separation of Pt and Pd from the main elements emitted from catalysts of gasoline-fueled cars by exploiting the selective chelating ion exchanger Lewatit MonoPlus TP-214. Pt and Pd were then eluted with a recovery of 92% and 96%, respectively, using an acidified solution of thiourea, and the eluent was analyzed by sequential voltammetry. The detection limits are 0.04 μg L^?1 and 1 μg L^?1 for Pt and Pd, respectively, and the relative standard deviation is about 4.0% (for n?=?10). The procedure was successfully applied to particles emitted from automobile exhaust catalysts of four capacity engine vehicles. Graphite furnace atomic absorption spectrometry was also employed for reasons of comparison. Emission by four vehicles with 1400, 2600, 3200, and 4800 cc engines, respectively, ranged from 19 to 28 ng km^?1 for Pt, and from 102 to 150 ng km^?1 for Pd.

Determination of Zn(II) in rock and vegetable samples after acidic digestion followed by ultrasound-assisted solid-phase extraction with reduced graphene oxide as novel sorbent,in combination with flame atomic absorption spectrometry

Graphene, a novel class of carbon nanostructures, has great promise for use as sorbent materials because of its ultrahigh specific surface area. A new method using reduced graphene oxide (RGO) as sorbent was developed for the preconcentration of trace amounts of zinc (Zn) to its determination by flame atomic absorption spectrometry. Zinc could be adsorbed quantitatively on RGO in the pH range of 1–9, and then eluted completely with 0.5 mL of 0.1 mol L^?1 HCl. Some effective parameters on the extraction were selected and optimized. Under optimum conditions, the calibration graph was linear in the concentration range of 0.2–15 μg L^?1 with a detection limit of 0.14 μg L^?1 with an enrichment factor of 100.12. The relative standard deviation for ten replicate measurements of 10 μg L^?1 of Zn was 0.58 %, respectively. The proposed method was successfully applied in the analysis of rock and vegetable samples. Good spiked recoveries over the range of 99.9–100 % were obtained. This work not only proposes a useful method for sample preconcentration, but also reveals the great potential of graphene as an excellent sorbent material in analytical processes.     

Sensitive Analysis of Malondialdehyde in Human Urine by Derivatization with Pentafluorophenylhydrazine then Headspace GC–MS

A sensitive method based on derivatization with pentafluorophenylhydrazine then headspace gas chromatography–mass spectrometry has been used for analysis of malondialdehyde in human urine. Preparation of urine sample by one-step derivatization/evaporation was performed by reaction of malondialdehyde with pentafluorophenylhydrazine in a headspace vial for 10 min; the derivatives were then injected in GC–MS analysis. The reaction was performed at pH 3, and total analysis time was 35 min. The method detection limit was 0.04 μg L^?1. For MDA concentrations of 2.0 and 10.0 μg L^?1 the relative standard deviation was less then 5%. The concentration of MDA in urine was measured to be 0.199 ± 0.252 μmol g^?1 creatinine (0.022 ± 0.028 μmol mmol^?1 creatinine).     

Square-Wave Anodic Stripping Voltammetry (SWASV) for the Determination of Ecotoxic Metals,Using a Bismuth-Film Electrode

This article reviews the use of square wave anodic stripping voltammetry for the simultaneous determination of ecotoxic metals (Pb, Cd, Cu, and Zn) on a bismuth-film (BiFE) electrode. The BiFE was prepared in situ on a glassy-carbon electrode (GCE) from the 0.1 mol L^?1 acetate buffer solution (pH 4.5) containing 200 µg L^?1 of bismuth (III). The addition of hydrogen peroxide to the electroanalytical cell proved beneficial for the interference-free determination of Cu (II) together with zinc, lead, and cadmium, using the BiFE. The experimental variables were investigated and optimized with the view to apply this type of voltammetric sensor to real samples containing traces of these metals. The performance characteristics, such as reproducibility, decision limit (CC_a), detection capability (CC_β), sensitivity, and accuracy indicated that the method holds promise for trace Cu²⁺, Pb²⁺, Cd²⁺, and Zn²⁺ levels by employment of Hg-free GCE with SWASV. CCa, and CCβ were calculated according to the Commission Decision of 12 August 2002 (2002/657/EC). Linearity was observed in the range 20–280 µg L^?1 for zinc, 10–100 µg L^?1 for lead, 10–80 µg L^?1 for copper, and 5–50 µg L^?1 for cadmium. Using the optimized conditions, the stripping performance of the BiFE was characterized by low limits of detection (LOD). Finally, the method was successfully applied in real as well as in certified reference water samples.