New fluorinated polymers bearing pendant phosphonic groups for fuel cell membranes: Part 1 synthesis and characterizations of the fluorinated polymeric backbone

Radical copolymerizations of chlorotrifluoroethylene (CTFE) with vinyl ethers such as 2-chloroethyl vinyl ether (CEVE) and ethyl vinyl ether (EVE) were performed at 75 °C in the presence of peroxide initiator. Three copolymers were obtained and characterized by means of both NMR and elemental analysis. Then, the chlorine atoms in the side chains were converted into iodine atoms by nucleophilic substitution, which was monitored by ¹H NMR spectroscopy. A series of five copolymers with different amounts of iodine atoms in the side chains were thus obtained. These copolymers exhibited molecular weight values of about 25,000 g mol⁻¹, and the thermal analysis of the copolymers showed a starting degradation from about 220 °C. The T_g values were in the range of 34-41 °C and showed a linear dependence versus the content of iodine atoms.     

Phase behavior of biodegradable amphiphilic poly(l,l-lactide)-b-poly(ethylene glycol)-b-poly(l,l-lactide)

This study describes the miscibility phase behavior in two series of biodegradable triblock copolymers, poly(l-lactide)-block-poly(ethylene glycol)-block-poly(l-lactide) (PLLA-PEG-PLLA), prepared from two di-hydroxy-terminated PEG prepolymers (M_n = 4000 or 600 g mol⁻¹) with different lengths of poly(l-lactide) segments (polymerization degree, DP = 1.2-145.6). The prepared block copolymers presented wide range of molecular weights (800-25,000 g mol⁻¹) and compositions (16-80 wt.% of PEG). The copolymer multiphases coexistance and interaction were evaluated by DSC and TGA. The copolymers presented a dual stage thermal degradation and decreased thermal stability compared to PEG homopolymers. In addition, DSC analyses allowed the observation of multiphase separation; the melting temperature, T_m, of PLLA and PEG phases depended on the relative segment lengths and the only observed glass transition temperature (T_g) in copolymers indicated miscibility in the amorphous phase.     

Study of amphiphilic poly(1-dodecene-co-para-methylstyrene)-graft-poly(ethylene glycol). Part II: Preparation and micellization behavior of the amphiphilic copolymers

Poly(1-dodecene-co-pMS) copolymers were brominated by HBr/H₂O₂ system with high selectivity at the methyl groups of pMS units. It was found that longer reaction time, higher pMS content, and lower molecular weight of the copolymers were helpful for higher degree of bromination. Through a modified Williamson ether synthesis, poly(ethylene glycol) monomethyl ethers (PEG) were grafted onto the brominated copolymers, and the amphiphilic poly(1-dodecene-co-pMS)-graft-PEG copolymers which can be readily dissolved in n-octane were successfully synthesized. Due to their amphiphilic characteristics, they can self-assemble spontaneously into reverse micelles in n-octane. Their micellization behaviors were investigated by fluorescence probe technique, transmission electron microscopy (TEM), and dynamic light scattering (DLS). The critical micelle concentrations of the three copolymers in n-octane were determined at about 1.26 × 10⁻⁴, 1.58 × 10⁻⁴, and 1.95 × 10⁻⁴ g ml⁻¹ by fluorescence measurements. The morphologies of micelles were preliminarily explored by TEM and were found to be spheres.     

Third-order nonlinear optical studies of newly synthesized polyoxadiazoles containing 3,4-dialkoxythiophenes

The third-order nonlinear optical properties of newly synthesized soluble polyoxadiazoles containing 3,4-dialkoxythiophenes were investigated by using Z-scan and degenerate four-wave mixing (DFWM) techniques. The measurements were performed at 532 nm with 7 ns pulses from a Nd:YAG laser. We found a good agreement between the values of χ⁽³⁾ determined from both the experiments. Z-scan results indicate a negative nonlinear refractive index, n₂, whose magnitude is of the order of 10⁻¹⁰ esu for all the copolymers. The variation of nonlinear response among the copolymers clearly indicates the dependence of χ⁽³⁾ on donor and acceptor type of units present in these copolymers. The copolymers exhibit strong reverse saturable absorption and good optical limiting properties at 532 nm.     

Electrochemical,magnetic, catalytic and DNA cleavage studies of binuclear copper(II) complexes derived from pendant substituted tetraaza macrobicyclic compartmental ligands

A series of macrobicyclic unsymmetrical binuclear copper(II) complexes of compartmental ligands were synthesized from the Schiff base condensation of 1,8[N,N′-bis{(3-formyl-2-hydroxy-5-methyl)benzyl}]-1,4,8,11- tetraaza-5,5,7,12,12,14-hexa methylcyclotetradecane with diamines like 1,2-diamino ethane, 1,3-diamino propane, 1,4-diaminobutane, 1,2-diaminobenzene and 1,8-diaminonaphthalene. The complexes were characterized by elemental and spectral analysis. Electrochemical studies of the copper(II) complexes show two irreversible one-electron reduction processes around E¹_pc = −0.70 to −1.10 V and E²_pc = −0.98 to −1.36 V. ESR spectra of the binuclear copper(II) complexes show a broad signal at g = 2.10 and μ_eff values in the range 1.46–1.59 BM, which convey the presence of antiferromagnetic coupling. Cryomagnetic investigation of the binuclear complexes [Cu₂L³(ClO₄)](ClO₄) and [Cu₂L⁴(ClO₄)](ClO₄) show that the observed −2J values are 144 and 216 cm⁻¹, respectively. The observed initial rate (V_in) for the catalytic hydrolysis of p-nitrophenyl phosphate by the binuclear copper(II) complexes were in the range 1.8 × 10⁻⁵ to 2.1 × 10⁻⁵ Ms⁻¹. The initial rate (V_in) for the catalytic oxidation of catechol to o-quinone by the binuclear copper(II) complexes were in the range 2.7 × 10⁻⁵ to 3.5 × 10⁻⁵ Ms⁻¹. The copper(II) complexes have been found to promote cleavage of plasmid pBR 322 DNA from the supercoiled form I to the open circular form II.     

Electrochemiluminescent disposable cholesterol biosensor based on avidin–biotin assembling with the electroformed luminescent conducting polymer poly(luminol-biotinylated pyrrole)

An electrochemiluminescent cholesterol disposable biosensor has been prepared by the formation of assembled layers on gold screen-printed cells. The detection layer is based on the electro-formation of new luminol copolymers with different synthesized biotinylated pyrroles prepared by click-chemistry, offering a new transduction layer with new electroluminescent properties on biosensors. The electrochemiluminescence (ECL) luminol copolymers are electroformed by cyclic voltammetry (five cycles) at pH 7.0 uses a10⁻³ M biotinylated pyrrole–luminol ratio of 1:10 in PBS buffer. With respect to the recognition layer, cholesterol oxidase was biotinylated by incubation with biotin vinyl sulfone, and immobilized on the copolymer by avidin–biotin interaction. The analytical signal of the biosensor is the ECL enzymatic initial rate working in chronoamperometric mode at 0.5 V excitation potential with 10 s between pulses at pH 9.5. The disposable device offers a cholesterol linear range from 1.5 × 10⁻⁵ M to 8.0 × 10⁻⁴ M with a limit of detection of 1.47 × 10⁻⁵ M and accuracy of 7.9% for 9.0 × 10⁻⁵ M and 14.1% for 2.0 × 10⁻⁴ M, (n = 5). Satisfactory results were obtained for cholesterol determination in serum samples compared to a reference procedure.     

Synthesis and characterization of amorphous poly(ethylene terephthalate) copolymers containing bis[4-(2-hydroxyethoxy)phenyl]sulfone

Poly(ethylene terephthalate) copolymers (abbreviated as PETS) that contain bis[4-(2-hydroxyethoxy)phenyl]sulfone (BHEPS) were prepared from dimethyl terephthalate (DMT), ethylene glycol (EG) (5-95%) and BHEPS (5-95%). The compositions and microstructures of the copolyesters were determined by ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy, respectively. The thermal behaviors were studied over the entire range of copolymer compositions, using X-ray analysis, differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). The molecular weights, optical characteristics and tensile properties of these polymers were also determined. Experimental results indicated that the copolymers had a random microstructure. The intrinsic viscosities of the copolymers ranged from 0.65 to 0.69 dL/g. The copolyesters with BHEPS of <10 mol% were crystallizable, whereas the copolyesters with BHEPS of ?10 mol% were amorphous. Incorporating BHEPS affected the glass-transition temperature (T_g) values of those polymers, from about 81 °C for PETS₅ to 126 °C for PETS₉₅. The optical transmissions exceeded 86% for λ = 400 nm for all of the amorphous polyesters. The tensile modulus and strength of the copolyesters increased with BHEPS. However, they also became brittle and their elongation at break decreased.     

Homopolymer and copolymers of 4-nitro-3-methylphenyl methacrylate with glycidyl methacrylate: Synthesis, characterization, monomer reactivity ratios and thermal properties

The novel methacrylic monomer, 4-nitro-3-methylphenyl methacrylate (NMPM) was synthesized by reacting 4-nitro-3-methylphenol dissolved in ethyl methyl ketone (EMK) with methacryloyl chloride in the presence of triethylamine as a catalyst. The homopolymer and copolymers of NMPM with glycidyl methacrylate having different compositions were synthesized by free radical polymerization in EMK solution at 70 ± 1 °C using benzoyl peroxide as free radical initiator. The homopolymer and the copolymers were characterized by FT-IR, ¹H NMR and ¹³C NMR spectroscopic techniques. The solubility tests were tested in various polar and non-polar solvents. The molecular weight and polydispersity indices of the copolymers were determined using gel permeation chromatography. The glass transition temperature of the copolymers increases with increase in NMPM content. The thermogravimetric analysis of the polymers performed in air showed that the thermal stability of the copolymer increases with NMPM content. The copolymer composition was determined using ¹H NMR spectra. The monomer reactivity ratios were determined by the application of conventional linearization methods such Fineman-Ross (r₁ = 1.862, r₂ = 0.881), Kelen-Tudos (r₁ = 1.712, r₂ = 0.893) and extended Kelen-Tudos methods (r₁ = 1.889, r₂ = 0.884).     

Synthesis and electroluminescence properties of carbazole-containing 2,6-naphthalene-based conjugated polymers

Three types of carbazole containing 1,5-disubstituted poly(2,6-naphthalene) derivatives, i.e., 2,6-naphthalene homopolymer that has a carbazolyl side chain at 1,5-positions, random copolymers and alternating copolymers consisting of 1,5-dialkoxynaphthalene-2,6-diyl and N-phenylcarbazole-2,7-diyl were newly synthesized by Ni-mediated Yamamoto polycondensation and Pd-catalyzed Suzuki coupling reaction. The number-average molecular weights (M_n) of the polymers and their polydispersity indices (M_w/M_n) were 5.4-8.2 × 10³ and 1.4-1.7, respectively. These polymers exhibited blue photoluminescence in the film states and high fluorescence quantum efficiencies in CHCl₃ (?_fl = 0.70-1.00). The electroluminescence properties of these polymers were investigated by fabricating a PLED device that has a configuration of ITO/PEDOT(PSS)/polymer/CsF/Al. The device fabricated with the random copolymer exhibited highest performances showing a maximum brightness of 8370 cd/m² at 13 V and a maximum efficiency of 2.16 cd/A at 7 V.     

Thermotropic polyesters. 2: Synthesis, characterization and thermal transitions of copolyesters containing 4,4′-bis (ω-alkyloxy) biphenyl isophthalate units

Thermotropic copolyesters containing an isophthalate unit and mesogenic 4, 4′-bis (ω-hydroxyalkyloxy) biphenyls (n = 3, 4, 6) with different numbers of methylene units have been synthesized by melt polymerization. The number-average molar mass (M_n) was estimated from end group analysis by ¹H NMR. The copolymer compositions were also obtained from ¹H NMR. The thermal behavior of the copolymers containing even-even (n = 4, 6) and odd-even (n = 3, 4) pairings has been investigated and is also compared with that of the analogous homopolymers. The copolymers exhibit reduced melting point and extending liquid crystalline range identified using polarizing microscopy and DSC. All of the obtained compounds were characterized by conventional spectroscopic methods.     

Headspace single-drop microextraction coupled to microvolume UV-vis spectrophotometry for iodine determination

Headspace single-drop microextraction has been combined with microvolume UV-vis spectrophotometry for iodine determination. Matrix separation and preconcentration of iodide following in situ volatile iodine generation and extraction into a microdrop of N,N′-dimethylformamide is performed. An exhaustive characterization of the microextraction system and the experimental variables affecting iodine generation from iodide was carried out. The procedure employed consisted of exposing 2.5 μL of N,N′-dimethylformamide to the headspace of a 10 mL acidic (H₂SO₄ 2 mol L⁻¹) aqueous solution containing 1.7 mol L⁻¹ Na₂SO₄ for 7 min. Addition of 1 mL of H₂O₂ 1 mol L⁻¹ for in situ iodine generation was performed. The limit of detection was determined as 0.69 μg L⁻¹. The repeatability, expressed as relative standard deviation, was 4.7% (n = 6). The calibration working range was from 5 to 200 μg L⁻¹ (r² = 0.9991). The large preconcentration factor obtained, ca. 623 in only 7 min, compensate for the 10-fold loss in sensitivity caused by the decreased optical path, which results in improved detection limits as compared to spectrophotometric measurements carried out with conventional sample cells. The method was successfully applied to the determination of iodine in water, pharmaceutical and food samples.     

Flow injection system with in-line Winkler's procedure using 16-way valve and spectrofluorimetric determination of dissolved oxygen in environmental waters

Flow injection spectrofluorimetry with in-line Winklers procedure was developed for the dissolved oxygen (DO) determination. 2-Thionaphthol reacted with iodine produced by Winkler’s method to form fluorescence inactive disulfide compound. To automate the process completely, a 5-channel flow system with a newly designed 16-way valve was assembled. The system consisted of a dispersion coil (DC), a precipitate formation coil (PFC), a precipitate dissolving coil (PDC), and extraction coil (EC). A calibration can be constructed by using a standard iodine solution for dissolved oxygen. The calibration graph was linear over the range 1.2×10⁻⁴∼6.0×10⁻⁴ mol l⁻¹ iodine (1.96∼9.80 mg O l⁻¹)). The relative standard deviation (n=6) was below 0.3% for the 4×10⁻⁴ mol l⁻¹ iodine (6.27 mg O l⁻¹) determination. The sample throughput was 12/h.     

Structure and redox behavior of Ru(II)-diene complexes

A series of Ru(acac)₂(η⁴-diene) complexes containing cis- and trans-diene coordination have been investigated by cyclic voltammetry to correlate structural bonding and conformation patterns of diene ligands with redox behaviors. The solid-state structure of Ru(acac)₂(2,3-dimethyl-1,3-butadiene) has been determined by single crystal X-ray diffraction methods. Ru(acac)₂(2,3-dimethyl-1,3-butadiene) crystallizes in the monoclinic space group C2/c with a = 12.368(2) Å, b = 17.0600(2) Å, c = 16.0110(2) Å, β = 98.4405(10)° and V = 3341.38(10) ų for Z = 8. A structural comparison between several Ru-trans-η⁴-diene complexes and Ru-η⁴-1,3-cyclohexadiene revealed no difference in the Ru-C(diene) bond distances. However, through cyclic voltammetry experiments these species demonstrated different redox behavior, as function of the coordinated diene ligand.     

Synthesis,characterization and ethylene oligomerization and polymerization of 2-(1H-2-benzimidazolyl)-6-(1-(arylimino)ethyl)pyridylchromium chlorides

A series of N^N^N tridentate chromium complexes (C1–C6) bearing 2-(1H-2-benzimidazolyl)-6-(1-(arylimino)ethyl)pyridine derivatives was synthesized and characterized by elemental and spectroscopic analysis along with single-crystal X-ray crystallography. X-ray crystallographic analyses reveal chromium complex C1 as a distorted six-coordinated octahedral geometry. On treatment with modified methylaluminoxane (MMAO), the chromium complexes exhibited high activities for ethylene oligomerization (up to 1.50 × 10⁶ g mol⁻¹ (Cr) h⁻¹) and polymerization (up to 2.06 × 10⁶ g mol⁻¹ (Cr) h⁻¹) at 10 atm ethylene pressure. Various reaction parameters were investigated in detail, and less steric hindrance and electron-withdrawing substituents of ligands enhance the catalytic activities of their chromium complexes.     

Novel fluoroacrylated copolymers: synthesis, characterization and properties

The development of polymer waveguides leads to synthesis of fluorinated amorphous polymers with high transmission capacity, potential to tune their optical properties by tailoring the molecular structure, together with good processability, easy handling, good flexibility and low cost.In this work we have investigated new thermoplastic fluoroacrylated copolymers, synthesized by radical copolymerization of fluoroalkene(s) with five-membered cyclic carbonate and a third monomer or transfer agent, both containing OH group susceptible to be used for grafting of photocrosslinkable groups. The reaction of hydroxy functionalized copolymers with different acrylating agents results in fluoroacrylated resins with molecular weight in the range of 2000-3000 g mol⁻¹, yield >75% and good solubility in reactive diluents. In the presence of photoinitiator(s), they were crosslinked under UV-radiation in order to obtain optical waveguides.The copolymers synthesized were characterized by ¹H, ¹⁹F and ¹³C NMR as well as FT-IR spectroscopies and have good thermal stability (T_d > 200 °C). The refractive indeces of hydroxy functionalized fluorooligomers and acrylated resins were found to range from 1.44 to 1.45 at 23 °C and the T_gs (by DSC) varied from 40 to 110 °C depending on the content of the cyclic monomer. The optical characteristics of these thermoplastic fluoroacrylated copolymers are under progress.     

Peripheral and non-peripheral-designed multifunctional phthalocyanines; synthesis, electrochemistry, spectroelectrochemistry and metal ion binding studies

A novel type of ionophore ligands, 3′-(2,3-dihydroxypropylthio)-phthalonitrile and 4′(2,3-dihydroxypropylthio)-phthalonitrile, and their α- and β-tetrasubstituted metallo phthalocyanines, (MPc), (M = Zn^II, Co^II, Mn^IIICl, Fe^IIIAc, Cu^II) have been prepared and fully characterized by elemental analysis, FT-IR, ¹H and ¹³C NMR, and MS (ESI and Maldi-TOF). The complexes are soluble in both polar and non-polar solvents, such as MeOH and EtOH, THF, CHCl₃ and CH₂Cl₂. The spectroscopic properties of the complexes are affected strongly by the electron-donating sulfanyl units on the periphery of the phthalocyanines. The cation binding properties of the complexes, for example using Ag^I and Pd^II, were evaluated by UV-Vis spectroscopy and the results show the formation of polynuclear phthalocyanine complexes. Functional donors on the periphery of the zinc and copper complexes coordinate to Ag^I and Pd^II to give ca. a 2:1 metal-phthalocyanine complex binding ratio for the concentration of 2.5 × 10⁻⁵ M (Pc) and 1.0 × 10⁻³ M (Metal ions). Voltammetric and in-situ spectroelectrochemical studies were performed to characterize the redox behavior of the complexes. An in-situ electrocolorimetric method was applied to investigate the colors of the electro-generated anionic and cationic forms of the complexes.     

Microwave-assisted alkaline digestion combined with microwave-assisted distillation for the determination of iodide and total iodine in edible seaweed by catalytic spectrophotometry

Microwave energy has been novelty applied to speed up a tetramethylammonium hydroxide (TMAH) alkaline digestion of seaweed samples and to assist distillation of iodine from seaweed alkaline digests. Iodide in the alkaline digests from seaweed and distilled iodine, reduced back to iodine in a hydroxylamine hydrochloride solution, was determined by a catalytic spectrophotometric method based on the catalytic effect of iodide on the oxidation of As(III) by Ce(IV) in H₂SO₄/HCl medium (Sandell-Kolthoff reaction). The determination of iodide was directly performed in the alkaline digests, while total iodine was assessed by analyzing the hydroxylamine hydrochloride solution after the distillation process. Microwave-assisted alkaline digestion was performed using 7.5 mL of TMAH and irradiating samples at 670 W for two 5.5 min steps. Microwave-assisted distillation was carried out using 4.0 mL of the alkaline digest and 3 mL of a 2.2 M hydrochloric acid and 0.05% (m/v) sodium nitrite solution, with a microwave power at 670 W for two 90 s steps. The distillate (iodine vapor) was bubbled in 10 mL of a 500 μg mL⁻¹ hydroxylamine hydrochloride solution (accepting solution). The linear calibration ranges were 0.30-20.0 and 0.40-20.0 μg L⁻¹ for iodide determination and total iodine determination, respectively. The limit of detection was 9.2 μg g⁻¹ for iodide and 28.5 μg g⁻¹ for total iodine. Repeatability of the overall procedures, expressed as R.S.D. for 11 determinations, was 2.6% for 196.3 μg g⁻¹ of iodide measured after microwave-assisted alkaline digestion, and 5.8% for 954.3 μg g⁻¹ of total iodine by microwave-assisted alkaline digestion followed by microwave-assisted distillation. Finally, accuracy of the methods was assessed by analyzing the NIST-09 (Sargasso) certified reference material and the methods were applied to the determination of iodide and total iodine in different Atlantic edible seaweed samples with satisfactory results.     

Production of nanoparticles of methyl methacrylate and butyl methacrylate copolymers by microemulsion polymerization in the presence of maleic acid terminated poly(N-acetylethylenimine) macromonomers as cosurfactant

In this study, MMA/BMA copolymer nanoparticles were synthesized in oil-in-water microemulsions that were stabilized by sodium dodecyl sulphate (SDS) and initiated by potassium persulphate KPS. Maleic acid terminated poly(N-acetylethylenimine) (PNAEI) with two different chain lengths was also included in the recipe, as a cosurfactant and a comonomer. FTIR and ¹H-NMR proved incorporation of the macromonomer in the structure. High polymerization yields were achieved upto 98%. The viscosity average molecular weights of the copolymers were in the range of 2.77-5.50 × 10⁵. The glass transition temperatures of these copolymers were between 50.0 and 63.9 °C. The average diameter of nanoparticles were in range of 40-96 nm. It was possible to produce nanoparticles smaller than 100 nm and with narrower size distributions by using much lower concentrations of SDS by including the macromonomers in the microemulsion polymerization recipe.     

Aggregation and solubilization of organic solvents and petrol/gasoline in water mediated by block copolymers

A series of AB and ABA block copolymers of pDEGMEMA-b-pCHMA and pCHMA-b-pDEGMEMA-b-pCHMA cyclohexyl methacrylate (CHMA) and di(ethylene glycol) methyl ether methacrylate (DEGMEMA) with M_n ranging between 18,000 and 50,000 g mol⁻¹ and PDI = 1.09-1.32 were prepared via copper(I) mediated living radical polymerization with pyridylmethanimine ligands. Aggregation properties were investigated using a combination of ¹H NMR, dynamic and static light scattering. For comparative purposes poly(CHMA) and poly(DEGMEMA) homopolymers were prepared. The CAC values estimated for the di- and triblock copolymers soluble in cyclohexane are lower than 0.005 g L⁻¹ whereas the values found for block copolymers in methanol solutions are less than 0.070 g L⁻¹. DLS analysis showed the presence of micellar aggregates with diameters ranging from 25 to 40 nm with particle polydispersity indexes between 0.003 and 0.183. The pCHMA-b-pDEGMEMA-b-pCHMA micelles solubilized the aqueous phase in petrol/gasoline. The block copolymer-based micelles incorporate water within their hydrophilic domains, potentially overcoming a number of practical problems such as the formation of biphasic mixtures in solvent blends due to undesired water accumulation.     

cis- and trans-Bis(pyridine)chromium(III) complexes containing mixed-valence chrysenesemiquinonate–chrysenecatecholate ligands: Synthesis,characterization and interpretation of the electronic absorption spectra using ZINDO/S method

Two new geometrical isomers of [Cr(py)₂(chrySQ)(chryCat)] (chrySQ = chrysenesemiquinonate; chryCat = chrysenecatecholate; py = pyridine) were synthesized by two different synthetic procedures. In the first, an acetonitrile solution containing a stoichiometric mixture of Cr(CO)₆, chrysenequinone and pyridine was photolyzed with a Hg-lamp. The second procedure was based on substituting one of the chrysenesemiquinonate ligand in the tris-[Cr(chrySQ)₃] complex with two pyridine ligands. In both procedures two isomeric forms of [Cr(py)(chrySQ)(chryCat)] were isolated with the trans-isomer obtained in higher yield. The structures of the two isomers have been modeled using parameterized PM3 semiempirical method. Theoretical harmonic vibrational frequencies of the cis- and trans-isomers have been computed and compared with the experimental vibrational frequencies. Variable-temperature magnetic susceptibility has been studied for the two isomers in the 10–300 K temperature range. Theoretical modeling of the magnetic data indicated strong antiferromagnetic exchange interaction between Cr^III (S = 3/2) and chrySQ (S = 1/2) with J = −365 ± 6 and −395 ± 4 cm⁻¹ for the cis- and trans-isomers, respectively. The electrochemical behavior of cis- and trans-[Cr(py)₂(chrySQ)(chryCat)] complexes were studied by cyclic voltammetry in acetonitrile solvent. Both complexes showed two one-electron redox processes attributable to reversible reduction and oxidation of the chrySQ and chryCat ligands. Reduction of the Cr(III) to Cr(II) was observed for both complexes near−1300 mV. The electronic spectra of the two isomers were dominated by charge-transfer (LMCT, MLCT and ILCT) transitions. In addition, a low-energy intervalence charge-transfer (IVCT) transition was observed for the cis-isomer at 1085 nm. Theoretical studies of the electronic spectra by ZINDO/S-CI method were useful in interpreting the observed electronic transitions.