Cyclopalladation of N,N,N′,N′-tetramethylisophthalthioamide

Summary N,N,N,N-Tetramethylisophthalthioamide (Hmpt) was cyclopalladated with PdCl₂ in hot dimethylsulphoxide to give [PdCl(mpt)]. The structure was determined by X-ray analysis. The thioamide is metallated at C(2) to act as an S528-01C528-02S tridentate anionic ligand. There is appreciable steric repulsion between the benzene ring H(4, 6) and the dimethylamino groups. The hydrogens and the methyl groups mutually deviate from the coordination plane in opposite directions. The stability of the fused 5,5-membered chelate ring formed by the S528-03C528-04S ligand seems to overcome the steric hindrance. Derivatives were prepared by replacement of the chloride ion with iodide, diethyldithiocarbamate, 4-tert-butylpyridine, or tri-n-butylphosphine, and characterized spectroscopically. The S528-05C528-06S-fused chelate ring was maintained in these derivatives.     

Vibrational spectra of N,N-dimethyl/diethylaniline,N,N,N′,N′-tetramethyl/tetraethyl-p-phenylenediamine and N,N,N′,N′-tetramethyl/tetraethylbenzidine derivatives

The ground state and protonated state (quaternized salt) vibrational spectra (200–1800 cm⁻¹) of the title amines are reported for various ring and/or methyl deuterated derivatives. Complete assignments are proposed and compared to those established for the parent hydrocarbons, benzene and biphenyl, and for the parent primary amines, aniline, p-phenylenediamine and benzidine. The electronic distribution, N(n)→ring(π) charge-transfer character and inductive effects are characterized from a vibrational point of view. Finally changes in the vibrational and electronic conformation upon protonation of the nitrogen atom are discussed. These results provide a fundamental basis for the vibrational investigation of excited states and reactive transients of aromatic amines.     

Poly(N,N′-dichloro-N-ethyl-benzene-1,3-disulfonamide, N,N,N′,N′-tetrachlorobenzene-1,3-disulfonamide, poly(N,N′-dibromo-N-ethyl-benzene-1,3-disulfonamide, and N,N,N′,N′-tetrabromobenzene-1,3-disulfonamide catalyzed formylation of amines and alcohols using ethyl formate under microwave irradiation

A simple, rapid, and efficient procedure for formylation of primary and secondary amines and alcohols using ethyl formate catalyzed with poly(N,N′-dichloro-N-ethyl-benzene-1,3-disulfonamide (PCBS), N,N,N′,N′-tetrachlorobenzene-1,3-disulfonamide (TCBDA), poly(N,N′-dibromo-N-ethyl-benzene-1,3-disulfonamide (PBBS) and also N,N,N′,N′-tetrabromobenzene-1,3-disulfonamide (TBBDA) was adopted. The reactions were performed under microwave irradiation with high yields.     

Preparation and Characterization of N,N′-Dialkyl-1,3-propanedialdiminium Chlorides,N,N′-Dialkyl-1,3-propanedialdimines,and Lithium N,N′-Dialkyl-1,3-propanedialdiminates

We describe convenient preparations of N,N′-dialkyl-1,3-propanedialdiminium chlorides, N,N′-dialkyl-1,3-propanedialdimines, and lithium N,N′-dialkyl-1,3-propanedialdiminates in which the alkyl groups are methyl, ethyl, isopropyl, or tert-butyl. For the dialdiminium salts, the N₂C₃ backbone is always in the trans-s-trans configuration. Three isomers are present in solution except for the tert-butyl compound, for which only two isomers are present; increasing the steric bulk of the N-alkyl substituents shifts the equilibrium away from the (Z,Z) isomer in favor of the (E,Z), and (E,E) isomers. For the neutral dialdimines, crystal structures show that the methyl and isopropyl compounds adopt the (E,Z) form, whereas the tert-butyl compound is in the (E,E) form. In aprotic solvents all four dialdimines (as well as the lithium dialdiminate salts) adopt cis-s-cis conformations in which there presumably is either an intramolecular hydrogen bond (or a lithium cation) between the two nitrogen atoms.     

Sensitive Spectrophotometric Determination of Benzoylperoxide with N,N,N′,N′-Tetramethyl-p-phenylenediamine

Abstract

A highly sensitive spectrophotometric determination of benzoylperoxide (BPO) based on the color developing reaction between N,N,N′,N′-tetramethyl-p-phenylenediamine (TMPD) and BPO in the presence of cerium(IV) in weakly acidic media is proposed. The calibration graph is linear in the range 0–6000 ng BPO per 10 ml with an apparent molar absorptivity of 4.73 × 10⁵ 1 mol^?1 cm-1 at 612 nm. The proposed method is about 50-fold more sensitive than N-ethyl-2-naphthylamine (NENA), and application to assays of flour is described.     

The step dissociation constants of ethylenediamine-N,N′-diacetic-N,N′-dipropionic and ethylenediamine-N,N,N′,N′-tetrapropionic acids

The step dissociation constants of ethylenediamine-N,N′-diacetic-N,N′-dipropionic and ethylenediamine-N,N,N′,N′-tetrapropionic acids at 298.15 K and ionic strengths of 0.1, 0.5, and 1.0 (KNO₃) were determined potentiometrically. The results were extrapolated to zero ionic strength by the equation with one individual parameter. The thermodynamic constants of dissociation were calculated. The results are compared with the corresponding data on related compounds.     

Calorimetric study of the solubilization of ethylenediamine,N,N-dimethylaminoethylamine and N,N,N′,N′-tetramethylethylenediamine by reversed AOT micelles

Distribution constants and standard enthalpies of transfer of ethylenediamine (en), N,N-dimethylaminoethylamine (dmen) and N,N,N,N-tetramethylethylenediamine (tmen) partitioned between n-heptane and water containing reversed sodium bis(2-ethylhexyl) sulfosuccinate (AOT) micelles as a function of the molar concentration ratio R (R=[water]/[AOT]) were evaluated by a calorimetric method. The results show that en, dmen and tmen molecules, solubilized in the reversed micelles, are distributed between the micellar aqueous core and the micellar palisade layer. An analysis of the thermodynamic parameters of the partition process demonstrates the peculiar solvent properties of the water containing reversed AOT micelles.     

N-Lithio-N,N′,N″,N″-tetramethyldiethylenetriamine and N′-Lithio-N,N,N″,N″-tetramethyldiethylenetriamine; Oxidative Coupling of Aminomethyllithium Derivatives

N-lithio-N,N′,N″,N″-tetramethyldiethylenetriamine (I-Li) is formed from 2,5,8,11-tetramethyl-2,5,8,11-tetraazadodecane (III) or from 2,5,8,11,14,17-hexamethyl-2,5,8,11,14,17-hexaazaoctadecane (IV) with n-BuLi or sec-BuLi, respectively, its isomer N′ -lithio-N,N,N″,N″,-tetramethyldiethylene-triamine (II-Li) from tris(2-dimethylaminoethyl)amine (V) with n-BuLi. IV results from treatment of N-lithiomethyl-N,N′,N″,N″-tetramethyldiethylenetriamine (PMDTA-Li) with 1,2-dibromoethane.     

EFFECT OF N,N,N’,N’-TETRAALKYL TEREPHTHALAMIDE ON NON-ISOTHERMAL CRYSTALLIZATION KINETICS OF POLYPROPYLENE

The effect of N,N,N＇,N＇-tetraalkyl terephthalamide （TATA） on the non-isothermal crystallization and melting characteristics ofpolypropylene （PP） was studied. The addition of TATA can lead to the formation ofβ-crystal PP. With the increase in TATA concentration the degree of crystallinity for β-crystal PP increased significantly, and that for a-crystal PP decreased, which indicated that TATA effectively induced the formation of β-crystal PP. WAXD also revealed the existence of β-crystal PP after the introduction of TATA into PP. PP containing TATA crystallized at a temperature range of 5-10℃ higher than that of pure PP, and the half-crystallization time （t1/2） and Avrami exponent （n） of PP at the same cooling rate were decreased by the addition of TATA, indicating that TATA influenced the crystallization rate and crystallization growth mode of PP. The rate constant of crystallization of PP containing TATA （Zc） was larger than that of pure PP, which further indicated that the crystallization of PP was accelerated by the addition of TATA.     

N,N,N′,N′-四苄基乙二胺与氯化铜的络合物

Patel^[1]用无水氯化铜和N,N,N′,N′-四苄基乙二胺(简写为TBEn)制得Cu(TBEn)Cl₂和Cu(TriBEn)Cl₂(TriBEn,N,N,N′-三苄基乙二胺)固体络合物。本文报道对patel合成TBEn方法的改进和用水含氯化铜的TBEn制得和Cu(TBEn)Cl₂和Cu(TriBEn)Cl₂固体络合物的热分解结果。     

PVT properties of N,N,N′,N′-Tetraoctyl-3-oxapentanediamide (TODGA)

N,N,N??,N??-Tetraoctyl-3-oxapentanediamide (TODGA) is a versatile extractant for partitioning of fission products from highly active raffinate wastes. Its PVT properties are not available in literature. In this work, PVT properties of TODGA, estimated using group contribution method, are reported. A corresponding-states based equation as well as Wagner constants were also reported in the range of 273.15?K to critical temperature.     

Enantioselectivity switch controlled by N,N′-di- or N,N,N′,N′-tetra-substituted chiral thiophosphorodiamide ligands,structural relatives of thioureas,in catalytic additions of diethylzinc to aldehydes

We have developed a series of new chiral thiophosphorodiamide ligands derived from (1R,2R)-(+)-1,2-diphenylethylenediamine, which are the structural relatives of thioureas. An investigation into their catalytic properties in asymmetric additions of diethylzinc to aldehydes has shown that N,N,N′,N′-tetra-substituted chiral thiophosphorodiamides can give (R)-secondary alcohols with up to 98% yield and 98% ee, while N,N′-di-substituted chiral thiophosphorodiamides give (S)-secondary alcohols with up to 99% yield and 97% ee values. The enantioselectivity switch is highly efficient with a broad substrate scope. We have also proposed hypothetical reaction pathways, which result in an enantioselectivity switch.     

N α,N ω-DIPHOSPHONO-, DIPHOSPHINO-METHYL-L-α,ω-DIAMINOCARBOXYLIC ACIDS

Abstract

Treatment of N-hydroxymethylated lactames 1,4-diamino-L-butanoic acid–1, L-ornithine–2, and L-lysine–3 is carried out with phosphorus trichloride to give the phosphonic acids 4, 5 and 6, and with methyldichlorophosphine to give the methylphosphinic acids 7, 8 and 9, which after alkaline hydrolysis liberate the carboxylic acids 10–15. Analogously, from the L-lysine derivative–16 and the aminomethylphosphonic acid derivative 18, the acids 15 and 19 are obtained after hydrolysis. The herbicidal activity of the lysine derivative 15 is established.     

Solvent extraction of uranyl by N,N,N′,N′-tetraoctylsuccinylamide from nitric acid solution

Synthesis and characterization of N,N,N′,N′-tetraoctylsuccinylamide (TOSA) was carried out and used for extraction of U(VI) from nitric acid solutions. The effect of different factors affecting the extraction distribution ratio (TOSA concentration, concentrations of nitric acid, salting-out agent LiNO₃ concentration, equilibration time, temperature and effect of diluents) have been investigated. The results obtained indicated that TOSA have a great capability to extract uranyl with kerosene-1,3,5-trimethylbenzene than other diluents, it have a high extraction distribution ratios when the concentration of TOSA is lower and not found the third matter. It was found that the main extracted species is UO₂(NO₃)₂·TOSA. The apparent equilibrium constant of extraction determined is (2.32 ± 0.31) L³/mol³ at (298 ± 1) K. The enthalpy of extraction is ?35.20 ± 0.352 kJ/mol.