In situ scanning tunneling microscopy of 1,6-hexanedithiol, 1,9-nonanedithiol, 1,2-benzenedithiol, and 1,3-benzenedithiol adsorbed on pt(111) electrodes

Cyclic voltammetry (CV) and in situ scanning tunneling microscopy (STM) were used to examine four dithiol molecules, including 1,6-hexanedithiol, 1,9-nonanedithiol, 1,2-benzenedithiol, and 1,3-benzenedithiol, adsorbed on well-ordered Pt(111) electrodes in 0.1 M HClO(4). The open-circuit potential (OCP) of Pt(111) electrodes decreased substantially from 0.95 to 0.3 V (versus reversible hydrogen electrode) upon the adsorption of dithol molecules, which indicates that these adsorbates injected electrons into the Pt electrode. For all dithiol molecules, ordered adlattices of p(2 x 2) and (square root 3 x square root 3)R30 degrees were formed when the dosing concentration was lower than 150 microM and the potential of Pt(111) was more negative than 0.5 V. Raising the potential of Pt(111) from 0.1 to 0.4 V or more positive values could transform p(2 x 2) to (square root 3 x square root 3)R30 degrees before it turned disarray. The insensitivity of the structure of dithiol adlayers with their chemical structures was explained by upright molecular orientation with the formation of one Pt-S bond per dithiol molecule. This molecular orientation was independent of the coverage of dithiol molecules, as nucleation seeds produced at the beginning of adsorption were also constructed with p(2 x 2). The triangular-shaped STM molecular resolution suggested 3-fold binding of sulfur headgroup on Pt(111). All dithiols were adsorbed so strongly on Pt(111) electrodes that switching the potential negatively to the onset of hydrogen evolution in 0.1 M HClO(4) or water reduction in 1 M KOH could not displace dithiol admolecules.     

In-situ scanning tunneling microscopy of carbon monoxide adsorbed on Au(111) electrode

In-situ scanning tunneling microscopy (STM) coupled with cyclic voltammetry was used to examine the adsorption of carbon monoxide (CO) molecules on an ordered Au(111) electrode in 0.1 M HClO4. Molecular resolution STM revealed the formation of several commensurate CO adlattices, but the (9 x radical 3) structure eventually prevailed with time. The CO adlayer was completely electrooxidized to CO2 at 0.9 V versus RHE in CO-free 0.1 M HClO(4), as indicated by a broad and irreversible anodic peak which appeared at this potential in a positive potential sweep from 0.05 to 1.6 V. A maximal coverage of 0.3 was estimated for CO admolecules from the amount of charge involved in this feature. Real-time in-situ STM imaging allowed direct visualization of the adsorption process of CO on Au(111) at 0.1 V, showing the lifting of (radical 3 x 22) reconstruction of Au(111) and the formation of ordered CO adlattices. The (9 x radical 3) structure observed in CO-saturated perchloric acid has a coverage of 0.28, which is approximately equal to that determined from coulometry. Switching the potential from 0.1 to -0.1 V restored the reconstructed Au(111) with no change in the (9 x radical 3)-CO adlattice. However, the reconstructed Au(111) featured a pairwise corrugation pattern with two nearest pairs separated by 74 +/- 1 A, corresponding to a 14% increase from the ideal value of 65.6 A known for the ( radical 3 x 22) reconstruction. Molecular resolution STM further revealed that protrusions resulting from CO admolecules in the (9 x radical 3) structure exhibited distinctly different corrugation heights, suggesting that the CO molecules resided at different sites on Au(111). This ordered structure predominated in the potential range between 0.1 and 0.7 V; however, it was converted into new structures of (7 x radical 7) and ( radical 43 x 2 radical 13) on the unreconstructed Au(111) when the potential was held at 0.8 V for ca. 60 min. The coverage of CO adlayer decreased accordingly from 0.28 to 0.13 before it was completely removed from the Au(111) surface at more positive potentials.     

Electrodeposition of Au monolayer on Pt(111) mediated by self-assembled monolayers

In-situ scanning tunneling microscopy (STM), cyclic voltammetry (CV), and infrared reflection-adsorption spectroscopy (IRRAS) have been used to examine the electrodeposition of gold onto Pt(111) electrodes modified with benzenethiol (BT) and benzene-1,2-dithiol (BDT) in 0.1 M HClO4 containing 10 microM HAuCl4. Both BT and BDT were attached to Pt(111) via one sulfur headgroup. STM and IRRAS results indicated that the other SH group of BDT was pendant in the electrolyte. Both BT and BDT formed (2 x 2) structures at the coverage of 0.25, and they were transformed into (square root(3) x square root(3))R30 degrees as the coverage was raised to 0.33. These two organic surface modifiers resulted in 3D and 2D gold islands at BT- and BDT-coated Pt(111) electrodes, respectively. The pendant SH group of BDT could interact specifically with gold adspecies to immobilize gold adatoms on the Pt(111) substrate, which yields a 2D growth of gold deposition. Molecular resolution STM revealed an ordered array of (6 x 2 square root(13)) after a full monolayer of gold was plated on the BDT/Pt(111) electrode. Since BDT was strongly adsorbed on Pt(111), gold adatoms only occupied free sites between BDT admolecules on Pt(111). This is supported by a stripping voltammetric analysis, which reveals no reductive desorption of BDT admolecules at a gold-deposited BDT/Pt(111) electrode. It seems that the BDT adlayer acted as the template for gold deposit on Pt(111). In contrast, a BT adlayer yielded 3D gold deposit on Pt(111). This study demonstrates unambiguously that organic surface modifiers could contribute greatly to the electrodeposition of metal adatoms.     

In situ surface X-ray scattering of stepped surface of platinum: Pt(311)

Surface structure of a stepped surface of Pt, Pt(311) (=2(100)-(111)), has been determined under potential control in 0.1 M HClO4 with the use of in situ surface X-ray scattering (SXS). The crystal truncation rods (CTRs) are reproduced well with the (1x2) missing-row model. Relaxation of surface layers, which is observed on the low-index planes of Pt, is not found on Pt(311) in the "adsorbed hydrogen region". CTRs at 0.10 (RHE) have the same feature as those at 0.50 V, showing that the surface layers of Pt(311) have no potential dependence. Scanning tunneling microscopy (STM) also supports the (1x2) structure of Pt(311) in 0.1 M HClO4.     

Structures of a CO adlayer on a Pt(100) electrode in HClO4 solution studied by in situ STM

We have obtained the first in situ STM atomic images of a CO adlayer on a Pt(100)-(1 x 1) electrode in 0.1 M HClO(4) solution, exhibiting a phase transition from c(6 x 2)-10CO to c(4 x 2)-6CO at E > 0.3 V vs. RHE.     

Methanol oxidation on a Pt(111)-OH/O surface

The methanol oxidation on a hydroxylated Pt (Pt(111)-OH) surface has been investigated by means of infrared reflection absorption spectroscopy (IRAS) in ultra-high vacuum (UHV) and in acidic solution. The Pt(111)-OH surface in UHV was prepared by introducing water molecules on a Pt(111)-(2 x 2)-O surface and annealed at temperature higher than 160 K. Methanol was then, introduced to the Pt(111)-OH surface to show the dependence of the reaction intermediate on the annealing temperature. At an annealing temperature below 160 K, IR bands assignable to methanol overlayer were observed and no detectable intermediates, such as CO, formaldehyde and formate, were formed, suggesting that methanol molecules remain stable on Pt(111) surface without dissociation at this temperature region. At an annealing temperature above 160 K, on the other hand, CO and formate were observed. In addition, the oxidation of CO on Pt(111)-OH showed no sign of formate formation, indicating that formate is not derived from CO, but from a direct oxidation of methanol. Methanol oxidation was carried out in 0.1 mol dm(-3) HClO(4) solution on Pt(111) with a flow cell configuration and showed the formation of formate. These results indicate that the formate is the dominant non-CO intermediate both in UHV and in acidic solution, and the preadsorbed oxygen-containing species, in particular OH adsorbates, on Pt(111) surface plays a very important role in the formate formation process in methanol oxidation reaction.     

Electro-oxidation of carbon monoxide on well-ordered Pt(111)/Sn surface alloys

The electro-oxidation of CO on model platinum-tin alloy catalysts has been studied by ex-situ electrochemical measurements following the preparation of the Pt(111)/Sn(2x2) and Pt(111)/Sn(radical3 x radical3)R30 degrees surfaces. A surface redox couple, which is associated with the adsorption/desorption of hydroxide on the Sn sites, is observed at 0.28 V(RHE)/0.15 V(RHE) in H(2)SO(4) electrolyte on both surfaces. Evidence that it is associated with the adsorption of OH comes from ex-situ photoemission measurements, which indicate that the Sn atoms are in a metallic state at potentials below 0.15 V(RHE) and an oxidized state at potentials above 0.28 V(RHE). Specific adsorption of sulfate anions is not associated with the surface process since there is no evidence from photoemission of sulfate adsorption, and the same surface couple is observed in the HClO(4) electrolyte. CO is adsorbed from solution at 300 K, with saturation coverages of 0.37 +/- 0.05 and 0.2 +/- 0.05 ML, respectively. The adsorbed CO is oxidatively stripped at the potential coincident with the adsorption of hydroxide on the tin sites, viz., 0.28 V(RHE). This strong promotional effect is unambiguously associated with the bifunctional mechanism. The Sn-induced activation of water, and promotion of CO electro-oxidation, is sustained as long as the alloy structure remains intact, in the potential range below 0.5 V(RHE). The results are discussed in the light of the requirements for CO-tolerant platinum-based electrodes in hydrogen fuel cell anode catalysts and catalysts for direct methanol electro-oxidation.     

Pt（111）和Pt3Ni（111）表面上CO催化氧化反应的密度泛函理论研究

采用密度泛函理论,对Pt(111)和Pt3Ni(111)表面上CO和O的单独吸附、共吸附以及CO的氧化反应进行了系统的研究. 结果表明, Pt3Ni(111)表面上CO的吸附弱于Pt(111)表面, O的吸附明显强于Pt(111)表面. 两个表面表现出相似的CO催化氧化活性. 表面Ni的存在不但稳定了O的吸附,同时也降低了过渡态O的能量.     

Tellurium adatoms as an in-situ surface probe of (111) two-dimensional domains at platinum surfaces

Irreversibly adsorbed tellurium has been studied as a probe to quantify ordered domains in platinum electrodes. The surface redox process of adsorbed tellurium on the Pt(111) electrode and Pt(111) stepped surfaces takes place around 0.85 V in a well-defined peak. The behavior of this redox process on the Pt(111) vicinal surfaces indicates that the tellurium atoms involved in the redox process are only those deposited on the (111) terrace sites. Moreover, the corresponding charge density is proportional to the number of sites on (111) ordered domains (terraces) that are, at least, three atoms wide. Hence, this charge density can be used to measure the number of (111) terrace sites on any given platinum sample. Structural information about tellurium adsorption is obtained from atomic-resolution STM images for the Pt(111) and Pt(10, 10, 9) electrodes. A rectangular structure (2 x radical 3) and a compact hexagonal structure (11 x 8) were identified. However, the redox peak for adsorbed tellurium on (100) domains at 1.03 V overlaps with peaks arising from steps and (110) sites. Therefore, it cannot be used without problems for the determination of (100) sites on a platinum sample. On the (100) terraces, the surface structure of the adsorbed tellurium is c(2 x 2), as revealed by STM. Finally, tellurium irreversible adsorption has been used to estimate the number of (111) ordered domains terrace sites on different polycrystalline platinum samples, and the results are compared to those obtained with bismuth irreversible adsorption.     

CO oxidation on Pt-modified Rh(111) electrodes.

The CO electro-oxidation reaction was studied on platinum-modified Rh(111) electrodes in 0.5 M H2SO4 using cyclic voltammetry and chronoamperometry. The Pt-Rh(111) electrodes were generated during voltammetric cycles at 50 mV s(-1) in a 30 microM H2PtCl6 and 0.5 M H2SO4 solution. Surfaces generated by n deposition cycles were investigated (Ptn-Rh(111) with n=2, 4, 6, 8, 10, and 16). The blank cyclic voltammograms of these surfaces are characterized by a pronounced sharpening of the hydrogen/(bi)sulfate adsorption/desorption peaks, typical for Rh(111), and the appearance of contributions between 0.1 and 0.4 V, which were ascribed to hydrogen/(bi)sulfate adsorption/desorption on the deposited platinum. At higher potentials, the surface oxidation of Rh(111) is enhanced by the presence of platinum. The structure of the Pt-modified electrodes was investigated by STM imaging. At low Pt coverages (Pt2-Rh(111)), monoatomically high islands are formed, which grow three dimensionally as the number of deposition cycles increases. After eight cycles, the monolayer islands have grown in diameter and range from mono- to multiatomic height. At even higher Pt coverage (Pt16-Rh(111)), the islands grow to particles of approx. 10 nm in diameter, which are 5-6 atoms high. The CO stripping voltammetry on these surfaces is characterized by two peaks: A low-potential, structure-insensitive peak, ascribed to CO reacting at the platinum monolayer islands, whose onset is shifted 150, 250, and 100 mV negatively with respect to pure Rh(111), Pt(111), and polycrystalline Pt, respectively, indicating the enhanced CO electro-oxidation properties of the Pt overlayer system. A peak at higher potentials displays strong structure sensitivity (particle-size effect) and was ascribed to CO reacting on the islands of multiatomic height. Current-time transients recorded on the surface with the highest amount of monolayer islands (Pt4-Rh(111)) also indicate enhanced CO-oxidation kinetics. Comparison of the Pt4-Rh(111) current-time transients recorded at 0.635, 0.675, and 0.750 V versus RHE (reversible hydrogen electrode) with those of pure Rh(111) and Pt(111) shows greatly reduced reaction times. A Cottrellian decay at long times indicates surface-diffusion-limited CO oxidation on the bare Rh(111) surface, while the peak visible at short times is indicative of CO reacting at the monolayer platinum islands. The results presented here show that, as indicated by density functional theory (DFT) calculations, the CO-adlayer oxidation for this system is enhanced compared to both pure Rh and Pt.     

Structural effects of electrochemical oxidation of formic acid on single crystal electrodes of palladium

Structural effects on the rates of formic acid oxidation have been studied on Pd(111), Pd(100), Pd(110), and Pd(S)-[n(100) x (111)] (n = 2-9) electrodes in 0.1 M HClO4 containing 0.1 M formic acid with use of voltammetry. On the low index planes of Pd, the maximum current density of formic acid oxidation (jP) increases in the positive scan as follows: Pd(110) < Pd(111) < Pd(100). This order differs from that on the low index planes of Pt: Pt(111) < Pt(100) < Pt(110). Pd(S)-[n(100) x (111)] electrodes with terrace atomic rows n > or = 3 have almost the same jP as Pd(100), except Pd(911) n = 5. The value of jP on Pd(911) n = 5 is 20% higher than those of the other surfaces. Pd(311) n = 2, of which the first layer is composed of only step atoms, has the lowest jP in the Pd(S)-[n(100) x (111)] series. The adsorption geometry of the reaction intermediate (formate ion) is optimized by using density functional theory.     

CO adsorption on a Pt(111) surface partially covered with FeO_x nanostructures

The adsorption of CO on Pt group metals, as a most fundamental elementary reaction step, has been widely studied in catalysis and electrocatalysis. Particularly, the structures of CO on Pt(111) have been extensively investigated, owing to its importance to both fundamental and applied catalysis. Yet, much less is known regarding CO adsorption on a Pt(111) surface modulated by supported oxide nanostructures,which is of more relevance to technical catalysis. We thus investigated the coverage-dependent adsorption of CO on a Pt(111) surface partially covered by Fe Oxnanostructures, which has been demonstrated as a remarkable catalyst for low-temperature CO oxidation. We found that, due to its strong chemisorption, the coverage-dependent structure of CO on bare Pt is not influenced by the presence of Fe Ox. But,oxygen-terminated Fe Oxnanostructures could modulate the diffusivity of CO at their vicinity, and thus affect the formation of ordered CO superstructures at low temperatures. Using scanning tunneling microscopy(STM), we inspected the diffusivity of CO, followed the phase transitions of CO domains, and resolved the molecular details of the coverage-dependent CO structures. Our results provide a full picture for CO adsorption on a Pt(111) surface modulated by oxide nanostructures and shed lights on the inter-adsorbate interaction on metal surfaces.     

Electrocatalytic oxidation of ammonia on Pt(111) and Pt(100) surfaces

The electrocatalytic oxidation of ammonia on Pt(111) and Pt(100) has been studied using voltammetry, chronoamperometry, and in situ infrared spectroscopy. The oxidative adsorption of ammonia results in the formation of NH(x) (x = 0-2) adsorbates. On Pt(111), ammonia oxidation occurs in the double-layer region and results in the formation of NH and, possibly, N adsorbates. The experimental current transients show a hyperbolic decay (t(-1)), which indicates strong lateral (repulsive) interactions between the (reacting) species. On Pt(100), the NH(2) adsorbed species is the stable intermediate of ammonia oxidation. Stabilization of the NH and NH(2) fragments on Pt(111) and Pt(100), respectively, is in an interesting agreement with recent theoretical predictions. The Pt(111) surface shows extremely low activity in ammonia oxidation to dinitrogen, thus indicating that neither NH nor N (strongly) adsorbed species are active in dinitrogen production. Neither nitrous oxide nor nitric oxide is the product of ammonia oxidation on Pt(111) at potentials up to 0.9 V, as deduced from the in situ infrared spectroscopy measurements. The Pt(100) surface is highly active in dinitrogen production. This process is characterized by a Tafel slope of 30 mV decade(-1), which is explained by a rate-determining dimerization of NH(2) fragments followed by a fast decay of the resulting surface-bound hydrazine to dinitrogen. Therefore, the high activity of the Pt(100) surface for ammonia oxidation to dinitrogen is likely to be related to its ability to stabilize the NH(2) adsorbate.     

Kinetic studies of adsorbed CO electrochemical oxidation on Pt(335) at full and sub-saturation coverages

Electrochemical measurements were performed to characterize the kinetics of adsorbed CO oxidation on the surface of the stepped Pt(s)-[4(111)x(100)][triple bond, length half m-dash]Pt(335) single crystal electrode. For CO adsorbed to full coverage at 0.1 V (versus the reversible hydrogen electrode, RHE) in 0.5 M H(2)SO(4) at ambient temperature (23 degrees C), oxidation of the layer gave 7.6 x 10(14) +/- 0.3 CO/cm(2) as the saturation CO coverage, just below the average value reported for CO on Pt(335) in ultra high vacuum (8.3 x 10(14) +/- 0.6 CO/cm(2)). In potential step measurements carried out between 0.75 and 0.9 V, the peak region in the current-time transient was consistent with the surface reaction between adsorbed CO and adsorbed oxide as rate limiting. Plotting the log of the rate constant for the surface reaction versus potential gave a Tafel slope of 79 mV per decade, consistent with responses for CO electrochemical oxidation on structurally related stepped Pt electrodes. For CO coverages below saturation, current-time transients were more stable in 0.05 M H(2)SO(4) than in the higher concentration electrolyte. Numerically solving the rate equations to the Langmuir-Hinshelwood model of adsorbed CO electrochemical oxidation reproduced the main features in current-time transients measured at 0.7 V in 0.05 M H(2)SO(4) for sub-saturation CO coverages. The results provide new insights into CO oxidation on Pt at sub-saturation coverage and confirm that anions play a role in CO surface chemistry.     

Co-adsorption of CO onto a Ag-modified Pt(111)--restructuring of a Ag UPD layer monitored by EC-STM

The effect of co-adsorption of CO on an underpotentially deposited (UPD) silver monolayer on a Pt(111) single crystal electrode in 0.05 M sulfuric acid is investigated for the first time by means of electrochemical scanning tunneling microscopy (EC-STM). Pure electrochemical experiments suggest that the co-adsorption of CO onto Pt single crystal electrodes previously modified by a monolayer of Ag, forces Ag atoms of the first UPD monolayer into a second adlayer. The present EC-STM studies reveal the formation of a large-area Ag network after the co-adsorption of CO. The resulting Ag nanostructures formed on wide Pt(111) terraces are approximately 0.5 nm high and 10 nm wide. The desorption of the newly formed second Ag adlayer, the oxidation of CO and the desorption of Ag atoms from the first adlayer are monitored by EC-STM and simultaneously detected in the corresponding CVs in three different oxidation peaks. EC-STM images recorded afterwards show the unchanged Pt surface. The presence of Ag on the surface leads to a downward shift of the onset of oxygen adsorption on the Pt(111) surface.     

Vibrational spectroscopy on platinum single-crystal electrodes: Part I. In-situ infrared spectroscopic studies of the adsorption and oxidation of CO on Pt (111) in sulphuric acid

Platinum single-crystal electrodes of 5 mm diameter were prepared for in situ infrared spectroscopic measurements by melting platinum wires. The linear potential sweep voltammograms of hydrogen adsorption/desorption on Pt (111), (110) and (100) in 0.5 M sulphuric acid are in excellent agreement with those observed on smaller platinum single-crystal surfaces.The adsorption and oxidation of CO on Pt (111) in 0.5 M sulphuric acid was studied by in situ polarization modulated infrared reflection absorption spectroscopy. The effects of the initial adsorption potential and surface reconstruction on the nature and oxidation mechanism of the adsorbed CO layer are reported.     

Ordered molecular assemblies of substituted bis(phthalocyaninato) rare earth complexes on Au(111): in situ scanning tunneling microscopy and electrochemical studies

Substituted bis(phthalocyaninato) rare earth complexes ML2 (M = Y and Ce; L = [Pc(OC8H17)8]2, where Pc = phthalocyaninato) were adsorbed onto single crystalline Au(111) electrodes from benzene saturated with either YL2 or CeL2 complex at room temperature. In situ scanning tunneling microscopy (STM) and cyclic voltammetry (CV) were used to examine the structures and the redox reactions of these admolecules on Au(111) electrodes in 0.1 mol dm(-3) HClO4. The CVs obtained with YL2- and CeL2-coated Au(111) electrodes respectively contained two and three pairs of redox peaks between 0 and 1.0 V (versus reversible hydrogen electrode). STM molecular resolution revealed that YL2 and CeL2 admolecules were imaged as spherical protrusions separated by 2.3 nm, which suggests that they were oriented with their molecular planes parallel to the unreconstructed Au(111)-(1 x 1). Both molecules when adsorbing from approximately micromolar benzene dosing solutions produced mainly ordered arrays characterized as (8 x 5 radical3)rect (theta = 0.0125). The redox reactions occurring between 0.2 and 1.0 V caused no change in the adlayer, but they were desorbed or oxidized at the negative and positive potential limits. The processes of adsorption and desorption at the negative potentials were reversible to the modulation of potential. Electrochemical impedance spectroscopy (EIS) and CV measurements showed that YL2 and CeL2 adlayers could block the adsorption of perchlorate anions and mediating electron transfer at the Au(111) electrode, leading to the enhancement of charge transfer for the ferro/ferricyanide redox couple.     

Pt（111）表面上一氧化碳的吸附与氧化反应

Ｐｔ（１１１）表面上一氧化碳的吸附与氧化反应１）刘金尧（清华大学一碳化工国家重点实验室北京１０００８４）ＸｕＭＺａｅｒａＦ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｓｔｒｙＵｎｉｖｅｒｓｉｔｙｏｆＣａｌｉｆｏｒｎｉａＲｉｖｅｒｓｉｄｅＣＡ９２５２１）关键词...     

Electrocatalytic properties of Pt(111), Pt(332), Pt(331) and Pt(110) single crystal electrodes towards ethylene glycol oxidation in sulphuric acid solutions

In the present paper four platinum single crystal electrodes, two basal planes of Pt(111) and Pt(110) and two stepped surfaces of Pt(332) and Pt(331), were prepared and used in the study of electro-oxidation of ethylene glycol (EG). All of these Pt single crystal electrodes belong to the [1 0] zone of crystallography, and exhibit on their surface (111) symmetry sites or certain combinations of terraces of (111) symmetry with steps of (111) symmetry type. It has been found that as a result of a favourable steric matching of surface sites the Pt(110) electrode manifested a higher activity both for EG dissociative adsorption and oxidation than that of the Pt(111) electrode. The stepped surfaces of Pt(332) and Pt(331) operated with certain combinations of characteristics of Pt(111) and Pt(110). The best electrocatalytic properties have been obtained with a Pt(331) electrode, and this is attributed both to the configuration of the atomic arrangement and to the stability of this surface.In summary, the above results show that the performance of a given Pt single crystal electrode in EG oxidation at a potential below 1.0 V may be evaluated by three factors.

1. (1) The ability to resist self-poisoning (AB) which describes the difficulty of EG dissociative adsorption on the electrode surface.

2. (2) The activity for EG oxidation (AC). In considering that the threshold potential for EG oxidation on all electrodes is at 0.3 V and that the self-poisoning is encountered in PGPS, the activity for EG oxidation may be reasonably characterized by the intensity of the peak current acquired in NGPS near 0.6 V, which corresponds to the maximum current of EG oxidation on an activated (non-poisoned) surface of the electrode.

3. (3) The stability of activity during potential cycling (SA) between 0.05 and 1.0 V, which describes the resistance to the decrease of intensity of the EG oxidation current during voltammetric cycling.

For the two basal planes studied, the AB and SA of Pt(111) are higher than those of Pt(110), but its AC is much lower than that of Pt(110). These differences are clearly related to the surface atomic arrangement of the two electrodes. As has been discussed above, the surface of Pt(111) is atomically smooth and stable during voltammetric cycling. The surface of Pt(110) presents, however, atomic steps and is reconstructed under experimental conditions, i.e. certain steric configurations are encountered on the Pt(110) surface. The high AC and the low AB may be assigned to a favourite stereographic matching during EG adsorption and oxidation on Pt(110).The two electrodes with stepped surfaces, Pt(332) and Pt(331), contain different densities of (110) sites, which are formed on the border between terrace and step, as shown in Fig. 8. The AB of these two electrodes has been observed at a moderate range between that of Pt(111) and the AB of Pt(110). With a majority of (111) sites on its surface, the electrode of Pt(332) operates at a relatively higher AC than Pt(111) does, and its SA is not as good as that of Pt(111) but is much better than the SA of a Pt(110) electrode. In all cases the highest AC and SA are obtained with a Pt(331) electrode. It may be seen from the profile of a (331) plane (shown by the cross-section of A-A in Fig. 8) that all atoms on the top of the surface participated in forming (110) sites, and the atom on the step has two functions — one is to form a (110) site with an atom located in the terrace of second layer and the other is to form a (111) site in the terrace of the same layer. It has been mentioned in the above discussions that the Pt(110) electrode keeps a higher AC due to favourite stereographic matching in EG adsorption and oxidation, but its SA is the worst, due to the instability of the surface. The highest AC and SA obtained with Pt(331) may be ascribed not only to the high density of (110) sites existing on the surface, but also to the stabilization of these (110) sites, and moreover, the synergy generated by the atomic arrangement of the Pt(331) surface may also contribute to the performance of the Pt(331) electrode.     

Characterization and methanol electrooxidation studies of Pt(111)/Os surfaces prepared by spontaneous deposition

Catalytic activity of the Pt(111)/Os surface toward methanol electrooxidation was optimized by exploring a wide range of Os coverage. Various methods of surface analyses were used, including electroanalytical, STM, and XPS methods. The Pt(111) surface was decorated with nanosized Os islands by spontaneous deposition, and the Os coverage was controlled by changing the exposure time to the Os-containing electrolyte. The structure of Os deposits on Pt(111) was characterized and quantified by in situ STM and stripping voltammetry. We found that the optimal Os surface coverage of Pt(111) for methanol electrooxidation was 0.7 +/- 0.1 ML, close to 1.0 +/- 0.1 Os packing density. Apparently, the high osmium coverage Pt(111)/Os surface provides more of the necessary oxygen-containing species (e.g., Os-OH) for effective methanol electrooxidation than the Pt(111)/Os surfaces with lower Os coverage (vs e.g., Ru-OH). Supporting evidence for this conjecture comes from the CO electrooxidation data, which show that the onset potential for CO stripping is lowered from 0.53 to 0.45 V when the Os coverage is increased from 0.2 to 0.7 ML. However, the activity of Pt(111)/Os for methanol electrooxidation decreases when the Os coverage is higher than 0.7 +/- 0.1 ML, indicating that Pt sites uncovered by Os are necessary for sustaining significant methanol oxidation rates. Furthermore, osmium is inactive for methanol electrooxidation when the platinum substrate is absent: Os deposits on Au(111), a bulk Os ingot, and thick films of electrodeposited Os on Pt(111), all compare poorly to Pt(111)/Os. We conclude that a bifunctional mechanism applies to the methanol electrooxidation similarly to Pt(111)/Ru, although with fewer available Pt sites. Finally, the potential window for methanol electrooxidation on Pt(111)/Os was observed to shift positively versus Pt(111)/Ru. Because of the difference in the Os and Ru oxophilicity under electrochemical conditions, the Os deposit provides fewer oxygen-containing species, at least below 0.5 V vs RHE. Both higher coverage of Os than Ru and the higher potentials are required to provide a sufficient number of active oxygen-containing species for the effective removal of the site-blocking CO from the catalyst surface when the methanol electrooxidation process occurs.