Influences of capping molecules on optical properties of nanocrystalline ZnS:Cu

ZnS:Cu nanocrystals capped with different capping molecules have been successfully synthesized by a simple aqueous method. The prepared nanocrystals were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive analysis by X-rays (EDAX). The surface characterization of the nanocrystals was done by FTIR spectroscopy. The effect of capping agents on absorption and photoluminescence (PL) spectra of the ZnS:Cu nanocrystals was studied. A blue shift of the absorption peaks was observed and attributed to a quantum confinement effect, which increases the band gap energy. The photoluminescence spectra of the capped ZnS:Cu nanocrystals showed a broad peak in the range of 460–480 nm. The intensity of the PL spectra strongly depended on the capping agents.     

Synthesis and characterization of Cu doped ZnS nanoparticles using TOPO and SHMP as capping agents

Undoped and Cu²⁺ doped (0.2-0.8%) ZnS nanoparticles have been synthesized through chemical precipitation method. Tri-n-octylphosphine oxide (TOPO) and sodium hexametaphosphate (SHMP) were used as capping agents. The synthesized nanoparticles have been analyzed using X-ray diffraction (XRD), transmission electron microscope (TEM), Fourier transform infrared spectrometer (FT-IR), UV-vis spectrometer, photoluminescence (PL) and thermo gravimetric-differential scanning calorimetry (TG-DTA) analysis. The size of the particles is found to be 4-6 nm range. Photoluminescence spectra were recorded for ZnS:Cu²⁺ under the excitation wavelength of 320 nm. The prepared Cu²⁺-doped sample shows efficient PL emission in 470-525 nm region. The capped ZnS:Cu emission intensity is enhanced than the uncapped particles. The doping ions were identified by electron spin resonance (ESR) spectrometer. The phase changes were observed in different temperatures.     

Strong green luminescence of Ni2+-doped ZnS nanocrystals

ZnS nanoparticles doped with Ni²⁺ have been obtained by chemical co-precipitation from homogeneous solutions of zinc and nickel salt compounds, with S^2- as precipitating anion, formed by decomposition of thioacetamide (TAA). The average size of particles doped with different mole ratios, estimated from the Debye–Scherrer formula, is about 2–2.5 nm. The nanoparticles could be doped with nickel during synthesis without altering the X-ray diffraction pattern. A Hitachi M-850 fluorescence spectrophotometer reveals the emission spectra of samples. The absorption spectra show that the excitation spectra of Ni-doped ZnS nanocrystallites are almost the same as those of pure ZnS nanocrystallites (λ_ex=308–310 nm). Because a Ni²⁺ luminescent center is formed in ZnS nanocrystallites, the photoluminescence intensity increases with the amount of ZnS nanoparticles doped with Ni²⁺. Stronger and stable green-light emission (520 nm) (its intensity is about two times that of pure ZnS nanoparticles) has been observed from ZnS nanoparticles doped with Ni²⁺. Received: 18 December 2000 / Accepted: 17 March 2001 / Published online: 20 June 2001     

Synthesis and optical characterization of PVP and SHMP-encapsulated Mn-doped ZnS nanocrystals

Zinc sulfide semiconductor nanocrystals doped Mn²⁺ have been synthesized via a solution-based method utilizing optimum dopant concentration (4%) and employing polyvinyl pyrrolidone (PVP) and sodium hexametapolyphosphate (SHMP) as capping agents. UV-vis absorbance spectra for all of the synthesized nanocrystals show an exitonic peak at around 310 nm. The particle size and morphology were characterized by scanning electron microscopy (SEM), FT-IR, X-ray diffraction (XRD), transmission electron microscopy (TEM) and photoluminescence spectrum (PL). Diffraction data confirmed that the crystallite size is around 3-5 nm. Room temperature photoluminescence (PL) spectrum for the bare ZnS sample shows a strong band at ∼445 nm. The uncapped and capped(SHMP, PVP) ZnS:Mn²⁺ samples show a strong and broad band in the ∼580-585 nm range.     

Synthesis and photoluminescence characteristics of doped ZnS nanoparticles

Free-standing powders of doped ZnS nanoparticles have been synthesized by using a chemical co-precipitation of Zn²⁺, Mn²⁺, Cu²⁺ and Cd²⁺ with sulfur ions in aqueous solution. X-ray diffraction analysis shows that the diameter of the particles is ∼2–3 nm. The unique luminescence properties, such as the strength (its intensity is about 12 times that of ZnS nanoparticles) and stability of the visible-light emission, were observed from ZnS nanoparticles co-doped with Cu²⁺ and Mn²⁺. The nanoparticles could be doped with copper and manganese during the synthesis without altering the X-ray diffraction pattern. However, doping shifts the luminescence to 520–540 nm in the case of co-doping with Cu²⁺ and Mn²⁺. Doping also results in a blue shift on the excitation wavelength. In Cd²⁺-doped ZnS nanometer-scale particles, the fluorescence spectra show a red shift in the emission wavelength (ranging from 450 nm to 620 nm). Also a relatively broad emission (ranging from blue to yellow) has been observed. The results strongly suggest that doped ZnS nanocrystals, especially two kinds of transition metal-activated ZnS nanoparticles, form a new class of luminescent materials. Received: 16 October 2000 / Accepted: 17 October 2000 / Published online: 23 May 2001     

Photoluminescence characteristics of ZnS nanocrystallites doped with Ti3+and Ti4+

Direct synthesis of ZnS nanocrystallites doped with Ti³⁺ or Ti⁴⁺ by precipitation has led to novel photoluminescence properties. Detailed X-ray diffraction (XRD), fluorescence spectrophotometry, UV–vis spectrophotometry and X-ray photoelectron spectroscopy (XPS) analysis reveal the crystal lattice structure, average size, emission spectra, absorption spectra and composition. The average crystallite size doped with different mole ratios, estimated from the Debye–Scherrer formula, is about 2.6±0.2 nm. The nanoparticles can be doped with Ti³⁺ and Ti⁴⁺ during the synthesis without the X-ray diffraction pattern being altered. The strong and stable visible-light emission has been observed from ZnS nanocrystallites doped with Ti³⁺ (its maximum fluorescence intensity is about twice that of undoped ZnS nanoparticles). However, the fluorescence intensity of the ZnS nanocrystallites doped with Ti⁴⁺ is almost the same as that of the undoped ZnS nanoparticles. The emission peak of the undoped sample is at 440–450 nm. The emission spectrum of the doped sample consists of two emission peaks, one at 420–430 nm and the other at 510 nm. Received: 27 April 2001 / Accepted: 16 August 2001 / Published online: 17 October 2001     

The optical properties and energy transition process in nanocomposite of polyvinyl-pyrrolidone polymer and Mn-doped ZnS

This study has been carried out on the optical properties of polyvinyl-pyrrolidone (PVP), the energy transition process in nanocomposite of PVP capped ZnS:Mn nanocrystalline and the influence of the PVP concentration on the optical properties of the PVP capped ZnS:Mn nanocrystalline thin films synthesized by the wet chemical method. The microstructures of the samples were investigated by X-ray diffraction, the atomic absorption spectroscopy, and transmission electron microscopy. The results showed that the prepared samples belonged to the sphalerite structure with the average particle size of about 2–3 nm. The optical properties of samples are studied by measuring absorption, photoluminescence (PL) spectra and time-resolved PL spectra in the wavelength range from 200 to 700 nm at 300 K. From data of the absorption spectra, the absorption edge of PVP polymer was found about of 230 nm. The absorption edge of PVP capped ZnS:Mn nanoparticles shifted from 322 to 305 nm when the PVP concentration increases. The luminescence spectra of PVP showed a blue emission with peak maximum at 394 nm. The luminescence spectra of ZnS:Mn–PVP exhibits a blue emission with peak maximum at 437 nm and an orange–yellow emission of ion Mn²⁺ with peak maximum at 600 nm. While the PVP coating did not affect the microstructure of ZnS:Mn nanomaterial, the PL spectra of the PVP capped ZnS:Mn samples were found to be affected strongly by the PVP concentration.     

Study of photophysical properties of capped CdS nanocrystals

Here, we have examined the role of capping agent on the optical properties of CdS nanoparticles by steady-state and time-resolved photoluminescence (PL) spectroscopy. The estimated particles sizes are 3.45, 2.5 and 2.39 nm for uncapped, capped with silica (SiO₂) and thiosalicylic acid (TSA), respectively. The absorption and emission spectra show a clear blue shift to shorter wavelengths in presence of TSA- and SiO₂-capped nanoparticles. It is found that the average decay time 〈τ〉 are 6.24, 4.54 and 2.84 ns for uncapped, capped with SiO₂ and TSA nanoparticles, respectively. Our analysis suggests that the hole or the electron is trapped on thiol molecule of TSA or hydroxyl group of SiO₂, then radiative recombination of the electron and hole is delayed, resulting in strong quenching of PL efficiency.     

Photoluminescence of CdS nanoparticles embedded in a starch matrix

CdS nanoparticles were synthesized by precipitation in aqueous solution using starch as the capping molecule, and the effect of the pH of the solution on the optical absorption, photoluminescence, and size of the nanoparticles was studied. Absorption spectra, obtained by photoacoustic spectroscopy, indicated that the band gap energy of the crystalline nanoparticles decreased from 2.68 eV down to 2.48 eV by increasing the pH of the solution from 9 up to 14. The X-ray diffraction analysis revealed that the CdS nanoparticles were of zinc blende structure, and that the particle size increased from 1.35 nm up to 2.45 nm with increasing pH. In addition, temperature-dependent photoluminescence (PL) measurements of the capped material showed a blue-shift of the emission peak for temperatures higher than 150 K, indicating the influence of starch on the formation of defect levels on the surface of the CdS nanoparticles.     

Temperature dependence of photoluminescence and magnetic properties in Yb-doped ZnS nanocrystals

Zinc sul?de semiconductor nanocrystals doped with Yb³⁺ ions have been prepared through a chemical precipitation method using PVP (polyvinylpyrrolidone) as a capping agent. The structure of the nanoparticles has been analyzed by X-ray diffraction (XRD). The average size of the nanoparticles is found to be 3.7±0.4 nm. Photoluminescence spectra were recorded for doped ZnS nanoparticles as a function of temperature between 9 and 300 K. The results suggest that two emission bands have been observed at different temperatures. The width of 1.269 eV peak increases as temperature is raised. A shift of lower energy emission band has been observed with the change of temperature. Moreover, the magnetic measurement showed that the sample exhibits paramagnetic behavior.     

Formation of zinc sulfide nanoparticles in HMTA matrix

A hydrothermal method has been optimized for the synthesis of ZnS nanoparticles. The nanoparticles were stabilized using Hexamethylenetetramine (HMTA) as surfactant in aqueous solution. The self-assembling of the surfactant molecules in the water solution forms a unique architecture that can be adopted as the reaction template for the formation of nanomaterials. The average grain size of the nanoparticles calculated from the XRD pattern was of the order of 2 nm which exhibits cubic zinc-blende structure. TEM results showed that the synthesized nanoparticles were uniformly dispersed in the HMTA matrix without aggregation. The spectroscopic results revealed that the synthesized ZnS nanoparticles exhibits strong quantum confinement effect as the optical band gap energy increased significantly compared to the bulk ZnS material. Formation of HMTA capped ZnS nanoparticles were confirmed by FTIR studies. The PL spectra exhibit a strong green emission peak around 502 nm attributed to some self-activated defect centers related to Zn-vacancies.     

Gelatin–Chitosan composite capped gold nanoparticles: a matrix for the growth of hydroxyapatite

Growth of hydroxyapatite (HA) on gelatin–chitosan composite capped gold nanoparticles is presented for the first time by employing wet precipitation methods and we obtained good yields of HA. Fourier transform infrared spectroscopy (FTIR) spectrum has shown the characteristic bands of phosphate groups in the HA. Scanning electron microscopy (SEM) pictures have shown spherical nanoparticles with the size in the range of 70–250 nm, whereas ≥2–50 nm sized particles were visualized in high resolution transmission electron microscopy (HR-TEM). X-ray diffraction (XRD) spectrum has shown Bragg reflections which are comparable with the HA. Energy dispersive X-ray (EDX) studies have confirmed calcium/phosphate stoichiometric ratio of HA. The thermogravimetric analysis (TGA) has shown about 74% of inorganic crystals in the nanocomposite formed. These results have revealed that gelatin–chitosan capped gold nanoparticles, acted as a matrix for the growth of HA.     

CdS quantum dots for measurement of the size-dependent optical properties of thiol capping

Abstract  

The optical- and size-dependent properties of CdS quantum dots (QDs) were analyzed in the presence and absence of different capping agents in aqueous medium. The QDs have been characterized by UV–Vis, Photoluminescence, Fourier-transform infrared spectroscopy, X-ray diffraction, and Fluorescence lifetime measurements. QDs with the presence of thiol group in cubic phase with small grain size were observed in XRD and decrease in particle size of the same with increase in band gap is deduced through UV–Vis and XRD studies. The FT-IR spectrum confirms the interaction of thiol group with CdS. Fluorescence lifetime of capped QDs was higher compared to uncapped CdS QDs. The surface passivation of thiol group on CdS is shown in photoluminescence studies.     

Burstein–Moss shift and room temperature near-band-edge luminescence in lithium-doped zinc oxide

Nanopowders of pure and lithium-doped semiconducting ZnO (Zn_1−x Li _x O, where x= 0, 0.01, 0.03, 0.06, 0.09 and 0.15 in atomic percent (at.%)) are prepared by PEG-assisted low-temperature hydrothermal method. The average crystallite size is calculated using Debye–Scherrer formula and corrected for strain-induced broadening by Williamson–Hall (W–H) plot. The peak shift in XRD and the lattice constant of ZnO as a function of unit cell composition are predicted by Vegard’s law. The evolution of ZnO nanostructures from rod-shaped to particle nature is observed from TEM images and the influence of dopant on the morphology is investigated. The optical absorption measurement marks an indication that the incorporation of lithium ion into the lattice of ZnO widens the optical band gap energy from ∼2.60 to ∼3.20 eV. The near band edge (NBE) emission peak centered at ∼3.10 eV is considered to be the dominant emission peak in the PL spectra. Blue emission peak is not observed in doped ZnO, thus promoting defect-free nanoparticles. The Burstein–Moss shift serves as a qualitative tool to analyze the widening of the optical band gap and to study the shape of the NBE luminescence in doped ZnO nanopowders. FT-IR spectra are used to identify the strong metal–oxide (Zn–O) interaction.     

Synthesis and photoluminescent and nonlinear optical properties of manganese doped ZnS nanoparticles

In this work we synthesized ZnS:Mn²⁺ nanoparticles by chemical method using PVP (polyvinylpyrrolidone) as a capping agent in aqueous solution. The structure and optical properties of the resultant product were characterized using UV-vis optical spectroscopy, X-ray diffraction (XRD), photoluminescence (PL) and z-scan techniques. UV-vis spectra for all samples showed an excitonic peak at around 292 nm, indicating that concentration of Mn²⁺ ions does not alter the band gap of nanoparticles. XRD patterns showed that the ZnS:Mn²⁺ nanoparticles have zinc blende structure with the average crystalline sizes of about 2 nm. The room temperature photoluminescence (PL) spectrum of ZnS:Mn²⁺ exhibited an orange-red emission at 594 nm due to the ⁴T₁-⁶A₁ transition in Mn²⁺. The PL intensity increased with increase in the Mn²⁺ ion concentration. The second-order nonlinear optical properties of nanoparticles were studied using a continuous-wave (CW) He-Ne laser by z-scan technique. The nonlinear refractive indices of nanoparticles were in the order of 10⁻⁸ cm²/W with negative sign and the nonlinear absorption indices of these nanoparticles were obtained to be about 10⁻³ cm/W with positive sign.     

Surfactant assisted surface studies of zinc sulfide nanoparticles

We report a simple soft chemical method for the synthesis of ZnS nanoparticles using varying concentration of cationic surfactant CTAB and examine its surface properties. Powder X-ray diffraction, UV-vis spectroscopy, photoluminescence spectroscopy, selective area electron diffraction, and transmission electron microscopy are used to characterize the as prepared ZnS nanoparticles. XRD and TEM measurements show the size of polydispersed ZnS nanoparticles is in the range of 2-5 nm with cubic phase structure. The photoluminescence spectrum of ZnS nanoparticles exhibits four fluorescence emission peaks centered at 387 nm, 412 nm, 489 nm and 528 nm showing the application potential for the optical devices. In Raman spectra of ZnS nanoparticles, the modes around 320, 615 and 700 cm⁻¹ are observed.     

In situ fabrication and thermoelectric properties of PbTe–polyaniline composite nanostructures

PbTe–polyaniline (PANi) composite nanopowders were in situ fabricated via an interfacial polymerization method at room temperature (~293 K). The phase structure, composition, and morphology of the powders were characterized by X-ray powder diffraction, infrared spectroscopy, transmission electron microscopy (TEM), and high-resolution TEM, respectively. The results show that the composite nanopowders consist of PbTe nanoparticles, PANi/PbTe core–shell nanostructure, and PbTe/PANi/PbTe three-layer sphere-like nanostructures. Formation mechanism of the PbTe–PANi composite nanostructures was proposed. The thermoelectric properties of the composite powders after being cold pressed into pellets were measured from 293 to 373 K. As the temperature increases from 293 to 373 K, the Seebeck coefficient of the composite decreases from 626 to 578 μV K⁻¹ and the electrical conductivity increases from 1.9 to 2.2 S m⁻¹.     

Silver-doped calcium phosphate nanopowders prepared by electrostatic spraying

Silver-doped calcium phosphate nanopowders were successfully prepared by the cost-effective electrostatic spray-pyrolysis process. The properties of the silver-doped nanopowder annealed at 500°C for 30 min were investigated through X-ray diffraction analysis, field emission scanning electron microscope, and Fourier transform infrared spectroscopy. The silver-doped nanopowders with 70–90 nm particle size showed an antibacterial performance against Escherichia coli.     

SnO<Subscript>2</Subscript> nanocrystals synthesized by microwave-assisted hydrothermal method: towards a relationship between structural and optical properties

The exploration of novel synthetic methodologies that control both size and shape of functional nanostructure opens new avenues for the functional application of nanomaterials. Here, we report a new and versatile approach to synthesize SnO₂ nanocrystals (rutile-type structure) using microwave-assisted hydrothermal method. Broad peaks in the X-ray diffraction spectra indicate the nanosized nature of the samples which were indexed as a pure cassiterite tetragonal phase. Chemically and physically adsorbed water was estimated by TGA data and FT-Raman spectra to account for a new broad peak around 560 cm⁻¹ which is related to defective surface modes. In addition, the spherical-like morphology and low dispersed distribution size around 3–5 nm were investigated by HR-TEM and FE-SEM microscopies. Room temperature PL emission presents two broad bands at 438 and 764 nm, indicating the existence of different recombination centers. When the size of the nanospheres decreases, the relative intensity of 513 nm emission increases and the 393 nm one decreases. UV–Visible spectra show substantial changes in the optical absorbance of crystalline SnO₂ nanoparticles while the existence of a small tail points out the presence of localized levels inside the forbidden band gap and supplies the necessary condition for the PL emission.     

Synthesis, effect of capping agents, structural, optical and photoluminescence properties of ZnO nanoparticles

Zinc oxide nanoparticles were synthesized using chemical method in alcohol base. During synthesis three capping agents, i.e. triethanolamine (TEA), oleic acid and thioglycerol, were used and the effect of concentrations was analyzed for their effectiveness in limiting the particle growth. Thermal stability of ZnO nanoparticles prepared using TEA, oleic acid and thioglycerol capping agents, was studied using thermogravimetric analyzer (TGA). ZnO nanoparticles capped with TEA showed maximum weight loss. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used for structural and morphological characterization of ZnO nanoparticles. Particle size was evaluated using effective mass approximation method from UV-vis spectroscopy and Scherrer's formula from XRD patterns. XRD analysis revealed single crystal ZnO nanoparticles of size 12-20 nm in case of TEA capping. TEA, oleic acid and thioglycerol capped synthesized ZnO nanoparticles were investigated at room temperature photoluminescence for three excitation wavelengths i.e. 304, 322 and 325 nm, showing strong peaks at about 471 nm when excited at 322 and 325 nm whereas strong peak was observed at 411 for 304 nm excitation.