Structure, rheology and shear alignment of Pluronic block copolymer mixtures

The structure and flow behaviour of binary mixtures of Pluronic block copolymers P85 and P123 is investigated by small-angle scattering, rheometry and mobility tests. Micelle dimensions are probed by dynamic light scattering. The micelle hydrodynamic radius for the 50/50 mixture is larger than that for either P85 or P123 alone, due to the formation of mixed micelles with a higher association number. The phase diagram for 50/50 mixtures contains regions of cubic and hexagonal phases similar to those for the parent homopolymers, however the region of stability of the cubic phase is enhanced at low temperature and concentrations above 40 wt%. This is ascribed to favourable packing of the mixed micelles containing core blocks with two different chain lengths, but similar corona chain lengths. The shear flow alignment of face-centred cubic and hexagonal phases is probed by in situ small-angle X-ray or neutron scattering with simultaneous rheology. The hexagonal phase can be aligned using steady shear in a Couette geometry, however the high modulus cubic phase cannot be aligned well in this way. This requires the application of oscillatory shear or compression.     

Flow mechanisms in the face-centred cubic micellar gel of a diblock copolymer

The mechanisms of flow of a face-centred cubic micellar phase were investigated using small-angle X-ray scattering (SAXS) for samples under either steady or oscillatory shear in two different geometries: Couette cell and planar shear sandwich. The system studied was a gel formed by a poly(oxyethylene)–poly(oxypropylene) diblock copolymer in water. SAXS indicated that under steady shear in a Couette cell, flow occurs via sliding of hexagonal close-packed (hcp) layers with a close-packed [110] direction along the shear direction. Under oscillatory shear in the planar shear sandwich, coexistence between this orientation and one in which the hcp layers are rotated by 30° (and flow is in a [211] direction) was observed; however, when subject to oscillatory shear in the Couette cell, flow only occurred along a [110] direction. This observation of flow in a non-close-packed direction may be due to alignment induced by the walls of the shear sandwich. Received: 24 February 2001 Accepted: 21 March 2001     

Optical anisotropy of a thermotropic liquid-crystalline polymer in transient shear

A rheo-optical apparatus, based on a linear shear rheometer, has been constructed to study the deformation of liquid–crystalline polymers. This apparatus uses optical techniques such as flow birefringence, small-angle light scattering, and optical microscopic image analysis. The rheological responses were simultaneously measured under varying temperatures and deformation conditions. The modified Debye-Bueche equation for scattering, in the nonspherically symmetrical form, was adapted to analyze small-angle light-scattering data. The orientation correlation lengths, determined by this method, reveal the deformation mechanism in nematic melts. Flow birefringence results are in agreement with the proposed mechanism.     

Small-angle X-ray scattering study of a poly(oxyphenylethylene)–poly(oxyethylene) diblock copolymer gel under shear flow

 The structure and flow behaviour of a micellar “cubic” phase is studied, using small-angle X-ray scattering (SAXS) and constant stress rheometry on a poly(oxyphenylethylene)–poly(oxyethylene) diblock copolymer in water. The predominant structure is a face-centred cubic (fcc) array of spherical micelles, which under shear undergoes layer sliding to give a scattering pattern from stacked hexagonal close-packed layers. A detailed analysis of the SAXS data indicates the presence of a fraction of grains with a structure distorted from a fcc phase. The additional reflections that characterize this structure can be indexed to a rhombohedral unit cell, space group R3ˉm, with the same volume as the fcc unit cell. The rhombohedral unit cell corresponds to a cubic cell that has been “stretched” along a [111] direction, and it is suggested that such a structure results from the gradient in shear velocity in the Couette cell employed. Shearing at high shear rates leads to a “smearing out” of the reflections, but upon cessation of shear under these conditions a highly oriented SAXS pattern is obtained, which confirms the persistence of rhombohedral ordering. The shear-induced changes in orientation are correlated to a plateau observed in the stress plotted against shear rate, such a plateau being a sign of inhomogeneous flow. Received: 8 September 2000 Accepted: 29 November 2000     

Structure and dynamics of concentration fluctuations in a polymer blend solution under shear flow

The technique of small-angle light scattering (SALS) has been employed to investigate the time-dependent behavior of a single-phase, semidilute solution of polystyrene and polybutadiene in dioctyl phthalate under shear flow. Concentration fluctuations in the polymer blend solution are found to grow with time in the direction of flow, and their orientation angles evolve from 45° from the flow direction toward 0°, with the steady-state value being dependent on shear rate. SALS patterns are simulated using a modified Cahn-Hilliard-Cook model, with an additional collective restoring force to account for polymer elasticity. Predictions from this modified model for the orientation angles of the concentration fluctuations are in excellent agreement with the experimental results. Our model also predicts that the quiescent structure factor has a Gaussian form and that the steady-state orientation of the scattering patterns is dependent on shear rate. These predictions are also in good agreement with our experimental observations. © 1994 John Wiley & Sons, Inc.     

Shear-induced orientation of a rigid surfactant mesophase

An optically clear, crystalline, gel-like mesophase is formed by the addition of water to a micellar solution consisting of a mixture of 0.85 M anionic surfactant sodium bis(2-ethylhexyl) sulfosuccinate (AOT) and a 0.42 M zwitterionic surfactant phosphatidylcholine (lecithin) in isooctane. At 25 degrees C and water to AOT molar ratio of 70, the system has a columnar hexagonal microstructure with randomly oriented domains. The shear-induced orientation and subsequent relaxation of this structure were investigated by rheological characterization and small-angle neutron scattering (SANS). The rheological response implies that the domains align under shear, and remain aligned for several hours after cessation of shear. Shear-SANS confirms this picture. The sheared gel mesophase retains its alignment as the temperature is increased to 57 degrees C, indicating the potential to conduct templated polymer and polymer-ceramic composite materials synthesis in aligned systems.     

Orientation and relaxation of polymer–clay solutions studied by rheology and small-angle neutron scattering

The influence of shear on viscoelastic solutions of poly(ethylene oxide) (PEO) and clay [montmorillonite, i.e., Cloisite NA+ (CNA)] was investigated with rheology and small-angle neutron scattering (SANS). The steady-state viscosity and SANS were used to measure the shear-induced orientation and relaxation of the polymer and clay platelets. Anisotropic scattering patterns developed at much lower shear rates than in pure clay solutions. The scattering anisotropy saturated at low shear rates, and the CNA clay platelets aligned with the flow, with the surface normal parallel to the gradient direction. The cessation of shear led to partial and slow randomization of the CNA platelets, whereas extremely fast relaxation was observed for laponite (LRD) platelets. These PEO–CNA networklike solutions were compared with previously reported PEO–LRD networks, and the differences and similarities, with respect to the shear orientation, relaxation, and polymer–clay interactions, were examined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3102–3112, 2004     

Lyotropic liquid crystalline phases formed in ternary mixtures of 1-cetyl-3-methylimidazolium bromide/p-xylene/water: a SAXS, POM, and rheology study

The phase behavior of ternary mixtures of 1-cetyl-3-methylimidazolium bromide (C(16)mim-Br)/p-xylene/water is studied by small-angle X-ray scattering (SAXS), polarized optical microscopy (POM), and rheology measurements. Two types of lyotropic liquid crystalline phases are formed in the mixtures: hexagonal and lamellar. The structural parameters of the lyotropic liquid crystalline phases are calculated. Greater surfactant content in the sample leads to denser aggregation of the cylindrical units in the hexagonal liquid crystalline phase. The increase in lattice parameter and thickness of the water layer in lamellar phase are attributed to the increase of water content, and the area per surfactant molecule at the hydrophobic/hydrophilic interface for lamellar phase is found to be larger than that for hexagonal phase. The structural parameters of the liquid crystalline phases formed from the cetyltrimethylammonium bromide (CTAB) system are larger than those for the C(16)mim-Br system. The rheological properties of the samples are also found to be related to the structure of the liquid crystalline phases.     

Structural changes and chain radius of gyration in cold-drawn polyethylene after annealing: small- and wide-angle X-ray scattering and small-angle neutron scattering studies

Samples made from linear polyethylene were drawn at room temperature and subsequently annealed at high temperatures below the melting point. The structural changes of the crystalline lamellae and lamellar superstructures as well as the single chain radius of gyration were studied by means of combined small- and wide-angle X-ray scattering and small-angle neutron scattering (SANS). After drawing, the polymeric chain segments in the crystalline phase are preferentially oriented along the drawing direction with a high degree of orientation whereas the lamellae in the samples are found to be slightly sheared exhibiting oblique surfaces as evidenced by X-ray scattering. SANS indicates that the chains are highly elongated along the drawing direction. Annealing the deformed samples at temperatures where the mechanical alpha-process of polyethylene is active leads to a thickening of both crystalline lamellae and amorphous layers. The chains in the crystalline phase retain their high degree of orientation after annealing while the lamellae are sheared to a larger extent. In addition, there is also lateral growth of the crystalline lamellae during high-temperature annealing. Despite the structural changes of the crystalline and amorphous regions, there is no evidence for global chain relaxation. The global anisotropic shape of the chains is preserved even after prolonged annealing at high temperatures. The results indicate that the mobility of polyethylene chains-as seen, e.g., by 13C NMR-is a local phenomenon. The results also yield new insight into mechanical properties of drawn PE, especially regarding stress relaxation and creep mechanisms.     

Orientation of platelets in multilayered nanocomposite polymer films

The orientation of platelets in micro-meter-thick polymer-clay nanocomposite films was investigated with small-angle neutron scattering (SANS), small-angle X-ray scattering (SAXS), and wide-angle X-ray diffraction (WAXD). The films with various clay contents (15–60% by mass fraction) were prepared by a layer-by-layer approach from polymer-clay solutions that led to the formation of a high degree of orientation in both polymer and clay platelets. Shear-induced orientation of polymer-clay solutions is compared with the orientation of polymer-clay films. SANS, SAXS, and WAXD, with beam configurations in and perpendicular to the spread direction of the film, were used to determine the structure and orientation of platelets. In all films, the clay platelets oriented preferentially in the plane of the film. The observed differences in semidilute solutions, with clay surface normal parallel to the vorticity direction, versus bulk films and with clay surface normal parallel to the shear gradient direction at clay mass fractions of 40 and 60%, were attributed to the collapses of clay platelet during the drying process. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3237–3248, 2003     

Phase behavior of sucrose monoalkanoate in a water-long-chain alcohol system

Phase diagram of a water/sucrose monododecanoate (SE)/hexanol system was determined at 30°C. Aqueous micellar, reverse micellar, normal hexagonal liquid crystalline, and lamellar liquid crystalline phases appear in the phase diagram. The change in interlayer spacing and interfacial section area of surfactant in the liquid crystalline phases was investigated by small-angle x-ray scattering. Upon addition of water, the section area and the radius of cylindrical aggregates are almost constant in a hexagonal liquid crystal, whereas the distance between each cylinder is separated on the water-SE axis. The interlayer spacing slightly decreases or is almost unchanged on the surfactant-hexanol axis, because alcohol molecules penetrate into the palisade of bilayers. Although the average section area decreases with increasing alcohol content, each section area of SE and alcohol molecules are kept constant. Since the interfacial section area of alcohol is less than the section area of hydrocarbon chain, the phase transition from lamellar liquid crystal to reverse micelle occurs in an alcohol-rich region.     

Nematic and columnar ordering of a PEG-peptide conjugate in aqueous solution

The self-assembly in aqueous solution of a PEG-peptide conjugate is studied by spectroscopy, electron microscopy, rheology and small-angle X-ray and neutron scattering (SAXS and SANS). The peptide fragment, FFKLVFF is based on fragment KLVFF of the amyloid beta-peptide, Abeta(16-20), extended by two hydrophobic phenylalanine units. This is conjugated to PEG which confers water solubility and leads to distinct self-assembled structures. Small-angle scattering reveals the formation of cylindrical fibrils comprising a peptide core and PEG corona. This constrained structure leads to a model parallel beta-sheet self-assembled structure with a radial arrangement of beta sheets. On increasing concentration, successively nematic and hexagonal columnar phases are formed. The flow-induced alignment of both structures was studied in situ by SANS using a Couette cell. Shear-induced alignment is responsible for the shear thinning behaviour observed by dynamic shear rheometry. Incomplete recovery of moduli after cessation of shear is consistent with the observation from SANS of retained orientation in the sample.     

Flow-induced structure in a thermotropic liquid crystalline polymer as studied by SANS

Small-angle neutron scattering is utilized to determine the flow induced alignment of a model thermotropic liquid crystalline polymer (LCP) as a function of shear rate and temperature. The results demonstrate that the flow-induced structures in thermotropic liquid crystalline polymers have similarities and differences to those in lyotropic liquid crystalline polymer solutions. The shear rate dependence of the alignment shows that the flow-induced alignment correlates very well to the viscosity behavior of the LCP in the shear thinning regime, while temperature variation results in a change in the extent of alignment within the nematic phase. Relaxation results also demonstrate that the flow-induced alignment remains essentially unchanged for up to an hour after the shear field has been removed. Last, there exists a regime at low shear rate and low temperature where alignment of the LCP molecule perpendicular to the applied shear flow is stable. These results provide important experimental evidence of the molecular level changes that occur in a thermotropic liquid crystalline polymer during flow, which can be utilized to develop theoretical models and more efficiently process thermotropic polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 3017–3023, 1998     

Phase behavior, self-assembly, and emulsification of tween 80/water mixtures with limonene and perfluoromethyldecalin

The phase behavior, microstructure, and emulsification of polyoxyethylene (20) sorbitan monooleate (Tween 80), water, and d-limonene (LM) or perfluoromethyldecalin (PFMD) has been studied by small-angle X-ray scattering and polarizing optical microscopy. In the Tween 80/water binary system, a micellar solution (L(1)), a hexagonal (H(1)) phase, and a water-swellable isotropic surfactant liquid (L(2)) phase are successively formed at 25 °C. LM can be solubilized into all of the phases formed by Tween 80/water mixtures, whereas no solubilization of PFMD occurs. The L(2) phase was found by small-angle neutron scattering to be bicontinuous with low interfacial curvature. Added water swells and amplifies the pre-existing amphiphilic structure. The stability of oil-in-H(1) complex emulsions is found to be sensitive to changes in structure that accompany solubilization.     

Small angle neutron scattering study of polyelectrolyte conformation incorporated into hybrid threadlike micelles under strong shear flows

A small angle neutron scattering study revealed that polyelectrolytes, sodium salts of partially sulfonated polystyrenes with narrow distributed molar masses of Mn = 27 x 10(3) and 340 x 10(3), which were incorporated into hybrid threadlike micelles formed with cetyltrimethylammonium bromide in aqueous (deuterium oxide) solutions at a quiescent state, behaved as rigid rods with lengths of 16 and 200 nm and the same radius of 2.3 approximately 2.4 nm, respectively. Under strong shear flows at shear rates much higher than the reciprocal of the mechanical relaxation time for the solution, the formed hybrid threadlike micelles were highly orientated to the shear flow axis owing to the generation of a shear induced liquid crystalline phase. The polyelectrolytes incorporated into the highly orientated micelle also maintained essentially the same conformation as those in the randomly orientated micelles in a quiescent state even at high shear rates.     

High-resolution NMR characterization of a gel-like surfactant mesophase

The addition of phosphatidylcholine to AOT water-in-oil microemulsions leads to the formation of a rigid gel as the water content is increased above a specific threshold. This system is a gel-like crystalline phase where the microstructure evolves from reverse hexagonal to lamellar with increasing water content and/or temperature. Couette sheared (1)H and (31)P NMR experiments carried out at varying temperature and water content show distinct signatures with microstructure evolution. Because the system has been fully characterized through small-angle neutron scattering, it is possible to relate the NMR signatures to the microstructure. The NMR technique therefore complements scattering techniques but is additionally useful because the technique also picks up isotropic signatures from concurrently occurring noncrystalline phases. The use of NMR to identify such lyotropic gel-like crystalline phases allows easy correlation between templated materials synthesis in these phases and phase microstructure. NMR can therefore be used as a probe to understand microstructure in specific surfactant systems and to characterize the retention of microstructure during materials synthesis.     

In situ small-angle neutron scattering and rheological measurements of shear-induced gelation

The microscopic structure of shear-induced gels for a mixed solution of 2-hydroxyethyl cellulose and nanometer-size spherical droplets has been investigated by in situ small-angle neutron scattering (SANS) with a Couette geometry as a function of shear rate gamma. With increasing gamma, the viscosity increased rapidly at gamma approximately 4.0 s(-1), followed by a shear thinning. After cessation of shear, the system exhibited an extraordinarily large steady viscosity. This phenomenon was observed as a shear-induced sol-gel transition. Real-time SANS measurements showed an increase in the scattering intensity exclusively at low scattering angle region. However, neither orientation of polymer chains nor droplet deformation was detected and the SANS patterns remained isotropic irrespective of gamma. It took about a few days for the gel to recover its original sol state. A possible mechanism of gelation is proposed from the viewpoint of shear-induced percolation transition.     

手征性侧链液晶高分子取向结构的研究

用偏光显微镜,红外二色性和Ｘ 射线衍射研究了一种手征性侧链液晶高分子的相态织构和弛豫行为．偏光显微镜观察这种侧链液晶高分子冻结取向液晶态薄膜时,可观察到与剪切方向垂直的明暗相间的条带织构．红外二向色性的结果表明,取向态中侧链上的介晶基元倾向于与剪切方向垂直排列．取向和非取向膜的Ｘ射线衍射揭示了该侧链液晶高分子具有反铁电性液晶的两套反相螺旋结构．取向薄膜在液晶态的弛豫行为表明,取向作用能促进侧链高分子近晶相层状结构的生长,而且介晶基元的取向在弛豫过程中能保持下来．     

Dispersion of thiol stabilized gold nanoparticles in lyotropic liquid crystalline systems

A new method of forming stable dispersions of alkanethiol and aromatic thiol stabilized gold nanoparticles in two different lyotropic liquid crystalline mediums, namely, a columnar hexagonal phase made up of a Triton X-100/water system and an inverse columnar hexagonal phase made up of pure AOT, are presented. The dispersions have been characterized using small-angle X-ray scattering (SAXS) and polarizing optical microscopy. Our studies show that the gold nanoparticles are distributed outside the columns formed by both the surfactants. Such dispersions can find applications in the study of nanoparticles as well as in the development of devices based on some unique properties of metal nanoparticles.     

Pressure-induced hexagonal phase in a ternary microemulsion system composed of a nonionic surfactant, water, and oil

The pressure-induced phase transition in a microemulsion, consisting of pentaethylene glycol mono-n-dodecyl ether, water, and n-octane, was investigated by means of small-angle neutron scattering. A pressure-induced phase transition from a lamellar structure to a hexagonal structure was observed. The temperature-pressure phase boundary shows a positive slope with dTdP approximately 0.09 KMPa. The structure unit of the high-pressure hexagonal phase was an oil-in-water cylinder with the membrane thickness of 15.5 A, identical to the low-temperature hexagonal phase. Pressurizing was found to have the same effect by decreasing temperature. This behavior was satisfactorily explained with the pressure dependence of the spontaneous curvature of surfactant membranes. That is, the volume change of surfactant tails plays a dominant role in the structure change of the microemulsion with applying pressure.