Light scattering and intrinsic viscosity investigation of polymethyl-3, 3, 3-trifluoropropylsiloxamer

Solution parameters for the polymer poly-γ-trifluoro-propylmethylsiloxamer has been determined in cyclohexyl acetate, methyl hexanoate, and ethyl acetate. Interpretation of data follows the theory of Fox and Flory. In contrast to poly-dimethylsiloxane, an increased steric hindrance to rotation about the siloxane bond occurs as evidenced by the characteristic ratio of root-mean-square end to end dimensions, (r₀² /r_0f² )^1/2, found to be 1.90 and 1.96 at 25.0 and 72.8°C, respectively. This increase is considered to be primarily due to nearest-neighbor interaction of the polar substituent on the silicon atom. The relation, [η]θ ∝ M^1/2, was observed to hold for this polymer system. The hydrodynamic model appropriate for the polymer is a random coil considerably more permeable to solvent flow than is generally reported for linear polymers. The universal parameter ? was determined to be 1.5 × 10²¹. The effect of temperature on polymer configuration is indicated to be negligible.     

Chain transfer constants for vinyl monomers polymerized in methyl oleate and methyl stearate

Chain transfer constants were obtained for styrene, methyl methacrylate, methyl acrylate and vinyl acetate, polymerized in methyl oleate and methyl stearate at 60°C. Transfer constants increased in the order: methyl methacrylate < styrene < methyl acrylate ? vinyl acetate in both solvents. Average values of the transfer parameters were: for methyl oleate, Q_tr = 2.04 × 10^?4, e_tr = 1.08; for methyl stearate, Q_tr = 0.373 × 10^?4, e_tr = 1.01. Indication that polar species predominate in the transition state is supported by the observed order of reactivity. The usual rate dependence appeared to be followed by all of the monomers except vinyl acetate, which was retarded, severely in methyl oleate. Transfer in methyl oleate was about 5.8 times greater than that found in methyl stearate for these four monomers. The internal allylic double bond of methyl oleate had about the same reactivity in transfer as had the terminal unsaturation in N-allylstearamide at 90°C. Rough estimates were obtained of the monomer transfer constants for the long side-chain homologs of these four monomers from the respective monomer transfer constants and the experimental transfer constants, corrected for transfer to the labile groups of the solvent. It was concluded that the rate of polymerization would determine in large measure the degree of polymerization for the reactive 18-carbon homologs but that the molecular weight of poly(vinyl stearate) and (oleate) will be regulated primarily by transfer to monomer.     

Polylactones. XXV. Polymerizations of racemic- and meso-D,L-Lactide with Zn,Pb, Sb,and Bi Salts—Stereochemical Aspects

Abstract

Polymerizations of racemic- and meso-d,l-lactide were conducted at 120°C in xylylene or in bulk. Lead oxide (PbO), zinc stearate, antimony(III) 2-ethylhexanoate, and bismuth(III) 2-ethylhexanoate were used as initiators. With PbO and Zn stearate, bulk polymerizations were also conducted at 150°C. High yields (?90%) were only obtained with PbO and Bi(III) 2-ethylhexanoate, but the molecular weights were low in all cases. The stereosequences were analyzed by ¹H- and ¹³C-NMR spectroscopy. A significant stereospecificity was never detected. At higher reaction temperatures the resulting stereosequences show an increasing tendency toward randomness.     

Water-soluble copolymers. XLII. Cationic polyelectrolytes of acrylamide and 2-acrylamido-2-methylpropanetrimethylammonium chloride

The new monomer 2-acrylamido-2-methylpropanetrimethylammonium chloride (AMP-TAC, M₂) has been synthesized. Free radical copolymerization with acrylamide (AM, M₁) in feed ratios varying from 10 to 50 mol % AMPTAC gave the cationic ATAM series. Copolymer compositions were determined from ¹³C-NMR. The reactivity ratio product r₁r₂ was found to be 0.62. Molecular weights varied from 1.4 to 16.5 × 10⁶ g/mol for the copolymers. Turbidimetric studies showed aqueous solutions of the copolymers to be phase stable in the presence of CaCl₂ and Na₂CO₃ up to 100°C. Solution behavior was independent of pH in the range of 3 to 11, and temperature in the range of 25 to 60°C. Intrinsic viscosities of the cationic copolymers decreased with the addition of electrolytes; however, some samples showed curvature in plots of intrinsic viscosity versus the inverse square root of ionic strength. © 1993 John Wiley & Sons, Inc.     

Poly[(4-N-ethylene-N-ethylamino)-α-cyanocinnamate]: A nonlinear optical polymer with a chromophoric mainchain. I. Synthesis and spectral characterization

Poly[(4-N-ethylene-N-ethylamino)-α-cyanocinnamate] was prepared by solution esterification of (4-N-ethyl-N-(2-hydroxyethyl) amino)-α-Cyanocinnamic acid and by melt transesterification of ethyl (4-N-ethyl-N-(2-hydroxyethyl) amino)-α-cyanocinnamate. The melt transesterification generally yielded polymer with a number-average molecular weight of about 10,200 by gel permeation chromatography (GPC) versus polystyrene standards. The polymer was found to be amorphous with a glass transition temperature of about 103°C by differential scanning calorimetry (DSC). The solution esterification generally gave a polymer with a number-average molecular weight of about 2200 by GPC versus polystyrene standards. This polymer was found to have a glass transition temperature varying between 60 and 90°C by DSC. The infrared (IR) spectrum of the polymer made from both methods were analyzed in detail. The ¹H- and ¹³C-NMR spectra of the meltsynthesized ethyl cinnamate derivative polymer are consistent with the reported structure.     

Synthesis and characterization of poly(cyclohexane 2,2-dipropargyl-1,3-propylene ketal) containing double spiro structure

The Polymerization was carried out by MoCl₅ and WCl₆ associated with various organo-metallic cocatalysts. MoCl₅-based catalysts were found to be more effective. Polymerization of monomer containing a spiro structure proceeded rapidly to reach 80% yield within 2 h at 30°C. Polymerization of monomer led to a soluble, purple colored polymer with number average molecular weight (M_n) of 50000. Elemental analysis, ¹H-NMR, ¹³C-NMR, IR, and UV-visible spectra of the resulting polymer indicated that the polymer contains alternating double and single bonds along the polymer backbone and a cyclic recurring unit with a double spiro structure. In addition, the polymer had good oxidative and thermal stability and good solubility in common organic solvents. © 1995 John wiley & Sons, Inc.     

Photopolymerization studies of alkyl and aryl ester derivatives of ethyl α-hydroxymethylacrylate

Several new benzoate ester derivatives of ethyl α-hydroxymethylacrylate were synthesized using phase transfer catalysis and found to display unexpectedly rapid photopolymerization; i.e., from 2 to 8 times faster than MMA. New derivatives described here include the 4-fluoro-, 4-trifluoromethyl-, 4-methyl-, 2-hydroxy-, 4-nitro-, 4-methoxy-, 4-cyano-, and 3,4,5-trimethoxybenzoate esters along with the parent benzoate ester. Relative reactivities of these monomers in photopolymerizations were compared with those of the nonaromatic formate, acetate, hexanoate, and stearate derivatives. Reactivities of the nonaromatic ester derivatives increased with the length of the side chain while for the more reactive aromatic esters, rates increased in the order 4-methyl-, 4-fluoro- and benzoate < 4-trifluoromethyl- and 2-hydroxy- < 4-cyano- < 4-methoxy- < 3,4,5-trimethoxybenzoate. T_gs of the benzoate polymers ranged from 125°C for the 4-fluoro to 163°C for the 4-cyanobenzoate while those of the alkyl ester derivatives ranged from 15 to 78°C. Number average molecular weights of photoinitiated polymers (ca 10,000–20,000) were lower than those found for bulk and solution polymers (20,000—708,000) consistent with higher radical concentrations from photoinitiation. These materials greatly expand the number of candidates available for rapid photocure in thin film and coating applications, especially because their physical properties are those of linear rather than highly crosslinked structures formed from multifunctional systems. © 1996 John Wiley & Sons, Inc.     

Synthesis and characterization of 3-aryl-2-(polystyryl)cyclopropenones via cyclopropenium ion substitution on polystyrene

Electrophilic substitution of cyclopropenium ions on aromatic polymers offers a unique opportunity to introduce polar functionality in a controlled manner to conventional, nonpolar polymers. Phenylcyclopropenone substituted polystyrene with predictable chemical composition and narrow molecular weight distribution were prepared. Size exclusion chromatography (SEC) analysis demonstrated the absence of branching or crosslinking in these functionalized polystyrenes during electrophilic substitution of the parent homopolymer. ¹³C-NMR confirmed that the degree of phenylcyclopropenone substitution was both highly efficient and predictable over a broad compositional range. The glass transition temperature (T_g) of the polymers was found to vary linearly with mole % phenylcyclopropenone substitution of the polystyrene. Thermal gravimetric analysis (TGA) indicated that thermal decarbonylation of the appended cyclopropenones occurred at approximately 180°C. Weight loss vs. temperature profiles correlated reasonably well with levels of substitution based on ¹³C-NMR analysis, confirming that decarbonylation of the calculated cyclopropenone substituents was the predominant thermal decomposition pathway. © 1995 John Wiley & Sons, Inc.     

Copolymerizations of Glycolide and L‐Lactide Initiated with Bismuth(III)n‐Hexanoate or Bismuth Subsalicylate

Equimolar copolymerizations of glycolide and L‐lactide were conducted in bulk in the temperature range from 100 to 160°C. The catalytic efficiency of tin(II)2‐ethylhexanoate (SnOct₂) and bismuth(III)n‐hexanoate (BiHex₃) were compared under identical conditions. Furthermore, four copolymerizations were conducted with bismuth subsalicylate as initiator/catalyst. The isolated copolyesters were characterized by viscosity and SEC measurements, by ¹H‐NMR spectroscopy with regard to their composition and with ¹³C‐NMR spectroscopy with regard to their sequences. BiHex₃ proved to be nearly as efficient as initiator as SnOct₂ and the sequences were somewhat closer to randomness than those obtained from SnOct₂. All copolyesters were amorphous materials soluble in a variety of organic solvents. Chain extension with diisocyanates raised the molecular weights by a factor of 5–7.     

Synthesis and Characterization of Poly(allyl methacrylate) Obtained by Free Radical Initiator

Allyl methacrylate was polymerized in CCl₄ solution by α,α′‐azoisobutyronitrile at 50, 60, and 70°C. The kinetic curves were auto‐accelarated types at 60 and 70°C, but almost linear at 50°C. Arrhenius activation energy was 77.5 kJ/mol. The polymer was insoluble in common organic solvents. It was characterized by FT‐IR, NMR, DSC, TGA and XPS methods. About 98–99% of allyl side groups were remained as pendant even after completion of the polymerization. The spectroscopic and thermal results showed that polymerization is not a cyclopolymerization type, but may have end group cyclization. The high molecular weight is the main cause of a polymer being insoluble even in the early stage of the polymerization. Molecular weight of 1.1×10⁶ for a soluble polymer fraction was measured by light scattering method. The Tg of polymer was 94°C, and after curing at 150–200°C, increased to 211°C. The thermal pyrolysis of polymer at about 350°C gave an anhydride by linkage type degradation, and side group cyclization. The XPS analysis showed the presence of radical fragments of AIBN (initiator) and CCl₄ (solvent) associated with oligomers.     

Trifluoroacetate ion-selective electrode

The trifluoroacetate ion-selective electrode was prepared by using the organic solvent solution of trifluoroacetate salt of crystal violet or tris(bathophenanthroline) iron(II) chelate.The response is linear over the activity range 10^?1 to 3 × 10^?5M, with a Nernstian slope 60 mV/activity decade at 29 °C. The interferences of divalent ions, chloride, fluoride and acetate ions are extremely low. Iodide interferes greatly.     

Polymers from 1,2-Disubstituted Ethylenic Monomers. IX. Radical High Polymerization of Methyl-tert-butyl Fumarate

Methyl-tert-butyl fumarate (MtBF) was found to homopolymerize in bulk in the presence of 2,2′-azobisisobutyronitrile (AIBN) at 50–80°C to give a high molecular weight polymer. From IR, ¹H-NMR and ¹³C-NMR spectra, this polymer was assumed to consist of alternating methoxycarbonylmethylene and tert-butoxycarbonylmethylene units, indicating that it was produced from MtBF through an ordinary vinylene polymerization mechanism. Consideration of a molecular model suggested that this polymer had a less flexible rodlike structure with the diameter of about 13.5 Å. The thermal properties of this polymer were also evaluated. Moreover, the bulk polymerization of MtBF initiated by AIBN was investigated kinetically at 60°C. The overall activation energy for this polymerization was determined to be 83.5 kJ/mol. The reaction orders with respect to the monomer and initiator concentrations were obtained as 2.0 and 0.33, respectively.     

Novel anionic polyaddition of 2‐trifluoromethylacrylate by double Michael reaction with ethyl cyanoacetate

Novel fluorinated polymer synthesis with anionic polyaddition by double Michael addition reaction of 2‐trifluoromethylacrylate derivatives with ethyl cyanoacetate (ECA) was proposed. Diaddition product of ECA with phenyl 2‐trifluoromethylacrylate was yielded in high yield by the catalysis of sodium ethoxide in tetrahydrofuran at 60 °C. Sodium hydroxide catalyzed double Michael addition reaction also produced diaddition product in high yield. Novel anionic polyaddition of 1,4‐phenylene bis(2‐trifluoromethylacrylate) [CH₂?C(CF₃)COOC₆H₄OCOC(CF₃)?CH₂] (PBFA) with ECA afforded the polymer of 1.2 × 10⁴ as the highest molecular weight. The isolated polymer gave the polymer of 2.8 × 10⁴ as a molecular weight by the reaction of the isolated polymer with PBFA in the presence of sodium ethoxide; which proved that the polymer end groups were mainly ECA moieties. The reaction mechanism that the proton abstraction from ECA followed by the addition of 2trifluoromethylacrylate was proposed. The reaction of acetylacetone with PBFA was also examined to give the polymer of 7.6 × 10³ as the highest molecular weight catalyzed by sodium hydroxide at room temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5698–5708, 2009     

Linear A–B and AA–BB polyamides with backbone aryl,alkyl, and alkenyl units

High performance linear AA–BB and A–B polyamides were generated using polymerization schemes that gave polymers in higher yields and having better performance than previous methods. Polymers were characterized with FTIR, solution and solid-state ¹³C-NMR and showed the incorporation of aryl, alkyl, and alkenyl linkages in the polymer backbone. Thermal analysis showed that a significant weight percent of the polymers remained at 1000°C.     

Radical polymerization of allyl alcohol and allyl acetate

Monoallyl compounds are not readily homopolymerized by a conventional free‐radical mechanism. However, the polymerization of allylbiguanide hydrochloride was reported to proceed in a concentrated solution of hydrochloric or phosphoric acid in the presence of a radical initiator. Here we have studied the polymerization of allyl alcohol by a radical initiator in the presence of a Lewis acid (ZnCl₂, CuCl₂ or MgCl₂) in an organic solvent (toluene, hexane, methanol or isopropanol). Reactions were performed either at room temperature or 50°C under an atmosphere of nitrogen or in a sealed tube. The same polymerization was also carried out in water and in a concentrated acid solution. The polymer product was purified by dialysis in 0.2–3.7% yield and confirmed by elemental analysis, infrared spectroscopy and ¹H NMR. The molecular weight range of poly(allyl alcohol) was 10,000–35,000. The polymerization of allyl acetate by the radical initiator under the above conditions gave poly(allyl acetate) with the molecular weight range of 10,000–13,800 by multi‐angle laser light scattering. Copyright © 2007 John Wiley & Sons, Ltd.     

SYNTHESIS AND CHARACTERIZATION OF A SERIES OF LIPOPHILIC CISPLATIN ANALOGS WITH CIS-1,4-DIAMINOCYCLOHEXANE AS NONLEAVING AMINE LIGAND

Abstract

A series of lipophilic platinum(II) complexes of the type [Pt(cis-1,4-DACH)L₂] (where cis-1,4-DACH = cis-1,4-diaminocyclohexane and L = acetate, propionate, butyrate, valerate, hexanoate, heptanoate, octanoate, 2,2′-dimethyloctanoate, nonanoate, decanoate, undecanoate, laureate, tridecanoate, myristate, pentadecanoate, palmitate, heptadecanoate, stearate, nonadecanoate, or eicosanoate) has been synthesized and characterized by elemental analysis and by infrared, ¹³C, and ¹⁹⁵Pt nuclear magnetic resonance spectroscopic techniques.     

Synthesis and characterization of ruthenium,rhenium and titanium formate,acetate and trifluoroacetate complexes. Correlation of IR spectral properties and bonding types

New formate (1–3; 4b, 6 and 7), acetate (8, 9) and trifluoroacetate (12, 13 and 15) complexes have been synthesized and characterized by elemental analysis and by IR and ¹H and ¹³C NMR spectroscopies. New data or new synthetic procedures are provided for several known complexes (4a, 5, 19, 11 and 14). X-ray structural data for cis-Ru(bpy)₂(CO)(OCHO)(PO₂F₂) (4b) clearly identify the η¹-bound formate ligand bound to an octahedral ruthenium center and the data for fac-Re(CO)₃(PPh₃(OCOMe) (9) show an η²-bound acetate ligand bound to an octahedral rhenium center. Infrared spectral data for four types of formate complexes, three bonding types of acetates and the two known types of trifluoroacetate ligands are discussed. Comparisons of the v_OCO bands for the carboxylate ligands in all of the complexes show that these bands are useful in identifying the bonding type of each carboxylate ligand.     

Polymers of carbonic acid. XVII. Polymerization of cyclobis(tetramethylene carbonate) by means of BuSnCl3 and Sn(II) 2-ethylhexanoate

Dimeric cyclotetramethylene carbonate (TeMC)₂ was polymerized in bulk at 185°C. Either nBuSnCl₃ or Sn(II)2-ethylhexanoate (SnOct₂) were used as catalysts. SnOct₂ proved to be somewhat less reactive, but high yields (up to 93%) and high viscosities (ν_inh up to 0.85 dL/g) were obtained with both catalysts. Viscosity-average molecular weights (M_v) in the range of 50–75 × 10³ were determined. The isolated crystalline poly(tetramethylene carbonate)s were characterized by IR, ¹H- and ¹³C-NMR spectra, DSC measurements and WAXD powder pattern. CH₂OH and octoate end groups were detected by means of ¹H-NMR spectroscopy when SnOct₂ was used as initiator, but ether groups were absent. DSC measurements revealed that poly(tetramethylene carbonate) is a slowly crystallizing polymer with a degree of crystallinity below 50% and a melting temperature in the range of 64–69°C depending on the molecular weight. Thermogravimetric analyses proved that polyTeMC decomposes completely between 240 and 340°C without leaving a residue. CO₂ and tetrahydrofuran were the main degradation products. © 1996 John Wiley & Sons, Inc.     

SYNTHESIS AND CHARACTERIZATION OF A SERIES OF LIPOPHILIC CISPLATIN ANALOGS WITH PIPERIDINE AS NONLEAVING AMINE LIGAND

Abstract

A series of lipophilic platinum(II) complexes of the type cis-[Pt(PIP)₂ L ₂] where PIP = piperidine and L = acetate, propionate, butanoate, pentanoate, hexanoate, heptanoate, octanoate, nonanoate, decanoate, undecanoate, laurate, tridecanoate, myristate, pentadecanoate, palmitate, heptadecanoate, stearate, nonadecanoate and eicosanoate has been synthesized and characterized by elemental analysis, and by infrared, ¹³C and ¹⁹⁵Pt nuclear magnetic resonance spectroscopic techniques. The complexes have been prepared as potential antitumor agents for liposome entrapment.     

Propagation Kinetics of Isoprene Radical Homopolymerization Derived from Pulsed Laser Initiated Polymerizations

The propagation kinetics of isoprene radical polymerizations in bulk and in solution are investigated via pulsed laser initiated polymerizations and subsequent polymer analyses via size‐exclusion chromatography, the PLP‐SEC method. Because of low polymerization rate and high volatility of isoprene, the polymerizations are carried out at elevated pressure ranging from 134 to 1320 bar. The temperatures are varied between 55 and 105 °C. PLP‐SEC yields activation parameters of k_p (Arrhenius parameters and activation volume) over a wide temperature and pressure range that allow for the calculation of k_p at technically relevant ambient pressure conditions. The k_p values determined are very low, e.g., 99 L mol^?1 s^?1 at 50 °C, which is even lower than the corresponding value for styrene polymerizations. The presence of a polar solvent results in a slight increase of k_p compared to the bulk system. The k_p values reported are important for determining rate coefficients of other elemental reactions from coupled parameters as well as for modeling isoprene free‐radical polymerizations and reversible deactivation radical polymerization with respect to tailored polymer properties and optimizing the polymerization processes.