Synthesis and modification of new biodegradable copolymers: Serine/glycolic acid based copolymers

Serine/glycolic acid-based biodegradable polymers have been prepared by ring-opening homopolymerization of 3-(O-benzyl)-L -serinylmorpholine-2,5-dione, and ring-opening copolymerization of the morpholine-2,5-dione derivative and L -lactide/ϵ-caprolactone. The homopolymerization was carried out in the melt at 165°C for 3 min using stannous octanoate as the initiator and continued at lower reaction temperatures (130–150°C) for 48 h, using a molar ratio of monomer and initiator of 1000 yielded a polymer of M_n = 4000. The polymer prepared by homopolymerization of the morpholine-2,5-dione derivative was composed of alternating protected serine and glycolic acid residues. Random copolymers of serine and glycolic acid and L -lactic acid/ϵ-caprolactone were synthesized by copolymerization reaction of 3-(O-benzyl)-L -serinylmorpholine-2,5-dione and lactide or ϵ-caprolactone in the melt at 165°C for 3 min and further reaction at 130°C using stannous octanoate as an initiator. The polymers were deprotected and functionalized through the side chain hydroxyl group of serine residues with an acrylate moiety for applications in injectable drug delivery, cell encapsulation. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1901–1907, 1997     

Melt block copolymerization of ϵ-caprolactone and L-lactide

AB block copolymers of ϵ-caprolactone and (L )-lactide could be prepared by ring-opening polymerization in the melt at 110°C using stannous octoate as a catalyst and ethanol as an initiator provided ϵ-caprolactone was polymerized first. Ethanol initiated the polymerization of ϵ-caprolactone producing a polymer with ϵ-caprolactone derived hydroxyl end groups which after addition of L -lactide in the second step of the polymerization initiated the ring-opening copolymerization of L -lactide. The number-average molecular weights of the poly(ϵ-caprolactone) blocks varied from 1.5 to 5.2 × 10³, while those of the poly(L -lactide) blocks ranged from 17.4 to 49.7 × 10³. The polydispersities of the block copolymers varied from 1.16 to 1.27. The number-average molecular weights of the polymers were controlled by the monomer/hydroxyl group ratio, and were independent on the monomer/stannous octoate ratio within the range of experimental conditions studied. When L -lactide was polymerized first, followed by copolymerization of ϵ-caprolactone, random copolymers were obtained. The formation of random copolymers was attributed to the occurrence of transesterification reactions. These side reactions were caused by the ϵ-caprolactone derived hydroxyl end groups generated during the copolymerization of ϵ-caprolactone with pre-polymers of L -lactide. The polymerization proceeds through an ester alcoholysis reaction mechanism, in which the stannous octoate activated ester groups of the monomers react with hydroxyl groups. © 1997 John Wiley & Sons, Inc.     

乙醇酸和DL─乳酸交替共聚物的合成和表征

乙醇酸和ＤＬ－乳酸交替共聚物具有不同于其无规共聚物的理化性能和生物降解性。以ＤＬ－３－甲基－１，４－二烷－２，５－二酮为单体，通过在辛酸亚锡引发下的本体开环聚合，合成了该交替共聚物，并进行了结构表征。     

Efficient synthetic approach to copolymers of glycolic and lactic acids for biomedical applications

An efficient approach to copolymers of glycolic and lactic acids applied in biomedical materials was developed using ring-opening polymerization catalysts based on alkoxy complexes of ‘biometals’ (Mg, Al, and Zn) and 3-methyl- 1,4-dioxane-2,5-dione and glycolide as comonomers.     

乙交酯与丙交酯共聚反应和竞聚率的测定

乳酸一羟基乙酸共聚物（PLG）是一种很好的生物医用材料，具有良好的生物相容性和生物降解性，对人体无毒害，可用作医用缝合线[1]、药物缓释胶囊[2]、内固定及牙科材料等[3]．Gilding和Reed[4]在乙交酯和丙交酯共聚反应转化率较高（12．9％～16.4％）时，利用二元共聚方?..     

不同旋光度PLGA的制备及其结晶性能研究

以消旋丙交酯、左旋丙交酯和乙交酯为原料,以辛酸亚锡为引发剂,在高真空条件下本体熔融开环聚合,制得一系列不同旋光度的丙交酯乙交酯共聚物(PLGA),其结构经1H NMR, IR, XRD和DSC表征.并采用DSC研究了PLGA的熔体结晶行为,结果表明其结晶性能随其旋光度的减少而显著降低,甚至不结晶.     

Synthesis of poly(D,L‐lactic acid‐alt‐glycolic acid) from D,L‐3‐methylglycolide

D ,L ‐3‐Methylglycolide (MG) was synthesized via two step reactions with a good yield (42%). It was successfully polymerized in bulk with stannous octoate as a catalyst at 110 °C. The effects of the polymerization time and catalyst concentration on the molecular weight and monomer conversion were studied. Poly(D ,L ‐lactic acid‐co‐glycolic acid) (D ,L ‐PLGA50; 50/50 mol/mol) copolymers were successfully synthesized from the homopolymerization of MG with high polymerization rates and high monomer conversions under moderate polymerization conditions. ¹H NMR spectroscopy indicated that the bulk ring‐opening polymerization of MG conformed to the coordination–insertion mechanism. ¹³C NMR spectra of D ,L ‐PLGA50 copolymers obtained under different experimental conditions revealed that the copolymers had alternating structures of lactyl and glycolyl. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4179–4184, 2000     

Melt Polymerization of Adipic Anhydride (Oxepane-2,7-Dione)

Oxepane-2,7-dione (1) was prepared by the reaction of adipic acid and acetic anhydride followed by catalytic depolymerization under vacuum. the ring-opening polymerization of (1) was investigated in the melt, and was studied as a function of polymerization temperature, time and concentration of catalyst (stannous 2-ethylhexanoate). from ¹H-NMR and IR spectra it can be deduced that stannous 2-ethylhexanoate coordinates with the anhydride bond of the ring, and that the resulting species reacts with the monomer by ring-opening of the acyl-oxygen bond. These observations indicate a non-ionic insertion polymerization mechanism at the beginning of the reaction, but after 2 h at 80°C, anhydride exchange appears to be the dominating reaction. Ring-opening melt polymerization of (1) resulted in low molecular weight poly (adipic anhydride).     

Ring-opening polymerization of L-lactide and preparation of its microsphere in supercritical fluids

The ring-opening polymerization of L-lactide initiated by stannous octoate was carried out in supercritical chlorodifluoromethane (scR22) at various reaction conditions (time and temperature) and reactant concentrations (initiator, monomer, and solvent). The monomer conversion increased to ca. 70% on increasing the reaction time to 1 h. The molecular weight of the poly(L-lactide) (PLLA) product also increased to ca. 160,000 g x mol(-1) over the same period. Increasing reaction temperature from 90 to 130 degrees C resulted in increased monomer conversion and PLLA molecular weight. A series of polymerizations conducted at various 1-dodecanol and stannous octoate concentrations suggested that stannous octoate does not act as an initiator by itself, and that the tin-alkoxide formed from 1-dodecanol and stannous octoate serves as the initiating species in scR22. While enhancements of the monomer conversion and PLLA molecular weight were observed with increasing monomer concentration, the chlorodifluoromethane concentration had the opposite on both. After the polymerization, PLLA microspheres were prepared in situ by using a continuous supercritical antisolvent process without residual organic solvent and monomer to yield highly purified microspheres for environmental and biomedical applications.     

6－甲基－2，5－二羰基吗啉与乙交酯二元共聚物的合成及表征

６－甲基－２，５－二羰基吗啉与乙交酯二元共聚物的合成及表征杜福胜，叶卫平，顾忠伟，杨纪元（国家计生委科研所药物研究室北京１０００８１）关键词６－甲基－２，５－二羰基吗啉，乙交酯，开环共聚聚羟基乙酸（ｐｏｌｙｇｌｙｃｏｌｉｄｅ，ＰＧＡ）是最简单的聚。一...     

6－甲基－2，5－二羰基吗啉与乙交酯二元共聚物的合成及表征

Poly(ester-amide) copolymers of glycolide(GA) and 6(R, S)-methyl2,5-morpholinedione(MMD) were synthesized by bulk ring-opening copolymerization of GA and MMD. The effects of polymerization temperature, time, initiator content, GA/MMD mol ratio in feed were investigated, and the results showed that the optimal temperature, time and initiator/monomers mol ratio are 130t, 48 hours and 0.1 %, respectively. The DSC analysis indicated that with the increase of GA content in the copolymer, the T_g of the copolymer is decreasing, the T_m and crystal-linity are increasing gradually.     

Synthesis and characterization of polycaprolactone (B)–poly(lactide‐co‐glycolide) (A) ABA block copolymer

Novel poly(lactide‐co‐glycolide) (PLGA)/polycaprolactone (PCL) ABA block copolymers were synthesized by bulk copolymerization of glycolide and lactide with PCL diols prepolymer using stannous octoate as catalyst. The resulting copolymers were characterized by various analytical techniques including gel permeation chromatography, IR, ¹H nuclear magnetic resonance, differential scanning calorimeter and X‐ray diffractometry. Mechanical properties and hydrophilicity of the copolymers were also studied. Data showed that the copolymers presented a part‐regular structure, containing both PCL crystalline and amorphous PLGA domains. The properties of these copolymers can be adjusted by changing the compositions of the copolymers. Copyright © 2000 John Wiley & Sons, Ltd.     

Synthesis and chemical structural analysis of nitroxyl‐radical‐incorporated poly(acrylic acid/lactide/ϵ‐caprolactone) copolymers

The goal of this research is to synthesize biodegradable polymers that would have nitroxyl radical biological functions. Linear aliphatic polyesters were chosen as the starting materials. The hydroxyl‐terminated polylactide/?‐caprolactones (PBLC‐OHs) were first synthesized by melt ring‐opening copolymerization in the presence of benzyl alcohol and stannous octoate. PBLC‐OHs were used as the precursor for the synthesis of double bond‐functionalized polylactide/?‐caprolactones (PBLC‐Mas) by reacting the hydroxyl end groups of PBLC‐OH with maleic anhydride in melt at 130 °C. Acrylic acid/lactide/?‐caprolactone graft copolymers (PBLCAs) were then successfully carried out by the radical copolymerization of acrylic acid and PBLC‐Ma initiated by azobisisobutyronitrile. Finally, nitroxyl radicals [4‐amino‐2,2,6,6‐tetramethylpiperidine‐1‐oxy (TAM)] were incorporated into the carboxylic acid sites of the acrylic acid/lactide/?‐caprolactone copolymer (TAM‐PBLCA) by reacting TAM with PBLCA in the presence of N,N′‐carbonyl diimidazole. A high content of TAM was incorporated into the PBLCA copolymer. The polymers synthesized were characterized by ¹H and ¹³C NMR, Fourier transform infrared spectroscopy, and electron paramagnetic resonance spectra. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4214–4226, 2001     

Preparation of methoxy poly(ethylene glycol)/polyester diblock copolymers and examination of the gel‐to‐sol transition

Diblock copolymers consisting of methoxy poly(ethylene glycol) (MPEG) and poly(?‐caprolactone) (PCL), poly(δ‐valerolactone) (PVL), poly(L ‐lactic acid) (PLLA), or poly(lactic‐co‐glycolic acid) (PLGA) as biodegradable polyesters were prepared to examine the phase transition of diblock copolymer solutions. MPEG–PCL and MPEG–PVL diblock copolymers and MPEG–PLLA and MPEG–PLGA diblock copolymers were synthesized by the ring‐opening polymerization of ?‐caprolactone or δ‐valerolactone in the presence of HCl · Et₂O as a monomer activator at room temperature and by the ring‐opening polymerization of L ‐lactide or a mixture of L ‐lactide and glycolide in the presence of stannous octoate at 130 °C, respectively. The synthesized diblock copolymers were characterized with ¹H NMR, IR, and gel permeation chromatography. The phase transitions for diblock copolymer aqueous solutions of various concentrations were explored according to the temperature variation. The diblock copolymer solutions exhibited the phase transition from gel to sol with increasing temperature. As the polyester block length of the diblock copolymers increased, the gel‐to‐sol transition moved to a lower concentration region. The gel‐to‐sol transition showed a dependence on the length of the polyester block segment. According to X‐ray diffraction and differential scanning calorimetry thermal studies, the gel‐to‐sol transition of the diblock copolymer solutions depended on their degrees of crystallinity because water could easily diffuse into amorphous polymers in comparison with polymers with a crystalline structure. The crystallinity markedly depended on both the distinct character and composition of the block segment. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5784–5793, 2004     

Pseudopoly(amino acid)s: Copolymerization of trans‐4‐hydroxy‐L‐proline and α‐hydroxy acids

A series of novel copolymers of trans‐4‐hydroxy‐L ‐proline (Hpr) and α‐ hydroxy acids [D,L ‐mandelic acid (DLMA) and D,L ‐lactic acid (DLLA)] were synthesized via direct melt copolymerization with stannous octoate as a catalyst. These new copolymers had pendant amine functional groups along the polymer backbone chain. The optimal reaction conditions for the synthesis of the copolymers were obtained with 4 wt % stannous octoate at 140 °C under vacuum for 16 h. The synthesized copolymers were characterized by IR spectrophotometry, proton nuclear magnetic resonance, differential scanning calorimetry, and Ubbelohde viscometry. The effects of the kinds of comonomers and the comonomer molar ratio on the polycondensation and glass‐transition temperature (T_g) were investigated. The T_g's of the copolymers shifted to lower temperatures with an increasing comonomer molar ratio. As expected, the T_g's of the N‐Z‐Hpr/DLMA copolymers were higher than the N‐Z‐Hpr/DLLA copolymers, the pendant groups on the monomers (N‐Z‐Hpr) became larger and more flexible, and the T_g's of the resulting polymers declined. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 724–731, 2001     

聚乙交酯-丙交酯-己内酯三元无规共聚物及其电纺膜的制备与表征

以左旋丙交酯、乙交酯和己内酯为原料,辛酸亚锡为催化剂,在真空条件下经本体熔融开环聚合,制备了三元无规共聚物(P),其结构和性能经1H NMR,IR,DSC和粘度表征。实验结果表明:P的玻璃化转变温度可通过单体的投料比调控;采用静电纺丝法可方便地获得共聚物亚微米纤维膜。     

Ring-Opening Polymerization of the Cyclic Ester Amide Derived from Adipic Anhydride and 1-Amino-6-hexanol in Melt and in Solution

The ring-opening polymerization (ROP) of the cyclic ester amide (cEA) 5 (systematic name, 1-oxa-8-aza-cyclotetradecane-9,14-dione) - prepared from adipic anhydride and 1-amino-6-hexanol - in the melt at 165 °C and in solution at 100 °C and 120 °C with Bu₂Sn(OMe)₂ or Ti(OBu)₄ as initiator yields the alternating poly(ester amide) (PEA) 4 (systematic name, poly(5-(6-oxyhexylcarbamoyl)-pentanoate) with regular microstructure. Kinetic studies for different monomer-to-initiator ratios, different reaction media, initiators and temperatures reveal that the ROP is a first-order reaction with respect to the monomer. Under suitable polymerization conditions termination and transfer reactions are suppressed. The elementary chain growth reaction proceeds by a coordination insertion mechanism in analogy to the polymerization of lactones. By using monohydroxy- and bishydroxy-functional telechelic poly(ethylene oxide) and Sn(octoate)₂ as the initiating system poly(ethylene oxide)-block-poly(ester amide)s and poly(ester amide)-block-poly(ethylene oxide)-block-poly(ester amide)s are obtained. The poly(ester amide) 4 is a semicrystalline material with a melting point of 140 °C, the block copolymers are phase separated systems showing two melting points characteristic for the respective homopolymers.     

Potential Biodegradable Implants from ϵ-Caprolactone and D,L-Lactide Copolymers: Synthesis,Properties, and In Vivo Degradation

Random copolymers of ?-caprolactone (CL) and D, L-lactide (DLLA) were synthesized by ring-opening polymerization using stannous octoate as catalyst. The effect of polymerization conditions, such as feeding dose, reaction temperature, polymerization time, and catalyst content on the properties of the copolymers was evaluated to prepare suitable copolymers with controlled properties for biodegradable implant applications. The results showed that the polymerization conditions influenced the thermal and mechanical properties of the copolymers strongly and controllable and tunable properties of random copolymers could be obtained by adjusting the copolymer compositions. The optimum reaction conditions to prepare the CL-DLLA copolymers for implant applications are 30–87 mol.% DLLA content in feeding dose, 110°C reaction temperature, and 24 h polymerization time. The results of in vivo implantation revealed the excellent degradability of CL-DLLA copolymers. Copolymers of CL and DLLA with different compositions and properties would be suitable for the application of biodegradable implants.     

PLGA-(L-Asp-alt-diol)(x)-PLGAs with different contents of pendant amino groups: synthesis and characterization

A series of novel biodegradable multi-block copolymers PLGA-(L-Asp-alt-diol)(x)-PLGA with pendant amino groups was synthesized by ring-opening polymerization of D,L-lactide/glycolide(D,L-LA/GA) (75/25) using poly(N-Cbz-L-Asp-alt-diol)s as macroinitiator and stannous octoate as catalyst, in which the N-Cbz-L-Asp represents N-carbobenzyloxy-L-aspartic acid and diols are ethylene glycol, triethylene glycol, PEG200, and PEG600, respectively. Their structures and properties were characterized by FTIR, (1)H NMR, DSC, GPC, and elemental analysis (EA). The contents of the L-Asp unit in the copolymers were increased from 12.9 to 79.3 mmol.g(-1) with decreasing the chain length of the diol, while the glass transition temperatures of the copolymers were decreased from 27.1 to 11.7 degrees C with increasing the chain length of the diol. Thus, the results in this study provide a way to prepare biomaterials with different L-Asp unit densities or different number of bioactive sites as well as different properties through adjusting the chain length of the diol. Synthesis of PLGA-(N-Cbz-L-Asp-alt-diol)(x)-PLGA copolymers.     

Synthesis and characterization of a functionalized amphiphilic diblock copolymer: MePEG-b-poly(DL-lactide-co-RS-β-malic acid)

A class of novel amphiphilic diblock copolymer of MePEG-b-poly(DL-lactide-co-RS-β-malic acid) has been synthesized via the hydrogenation over palladium on charcoal of MePEG-b-poly(DL-lactide-co-RS-β-benzyl malolactonate), which was prepared by ring-opening copolymerization of DL-lactide and RS-β-benzyl malolactonate (MABz) using methyl-polyethylene glycol (MePEG) as the initiator and stannous octoate as the catalyst. The influence of copolymerization temperature, reaction time, macro-initiator (MePEG-5000) proportion and monomer ratio was studied. Gel permeation chromatography measurements revealed that the molecular weight decreased with increasing MABz feeding dose. The configurational structures of the protected and de-protected copolymers were determined by ¹³C nuclear magnetic resonance (NMR), ¹H NMR and Fourier transform infrared. A water-swollen core of the nanospheres formed from the de-protected copolymer was discovered by transmission electron microscopy measurement. Additionally, the degradation experiments indicated that more hydrophilic malic acid content led to higher degradation rate.