The Tetraphenylester of the μ-Imido-Dithiodiphosphoric Acid and its palladium complex — crystal structures

The preparations of [(C₆H₅O)₂PS]₂NH ( SS ) and its Pd complex [Pd{C₆H₅O₂P(S)NP(S)(OC₆H₅) ₂}₂] ( PDSS ) are described. The compounds were characterized by elemental analysis, NMR, and mass spectra and X-ray structure analysis. The structure of SS contains two independent molecules in an asymmetric unit which are joined into dimers via N …? H …? S hydrogen bonds. SS is a Br?nsted acid And reacts with Pd^II to a neutral chelate complex. The structure of PDSS is composed of isolated molecules with Pd atom in the center of symmetry. The Pd atom is coordinated by 4 S atoms in a distorted square-planar arrangement with average distance Pd? S 2.345(6) Å and an angle S? Pd? S 98.29(4)°.     

Synthese,Struktur und einige Reaktionen [N-(N′,N′,N″,N″-tetramethyl)-guanidinyl]-substituierter Phosphorylverbindungen

Synthesis, Structure, and some Reactions of N-(N′,N′,N″,N″-tetramethyl)guanidinyl-substituted Phosphoryl Compounds The tetramethylguanidinyl-substituted phosphoryl compounds 1 – 10 were prepared in the reaction of the appropriate chlorophosphoryl compounds with either N′,N′,N″,N″-tetramethylguanidine (HTMG) or N-trimethylsilyl-(N′,N′,N″,N″-tetramethyl)guanidine (TMSTMG). With methyl iodide 1 reacted with N-alkylation to give the ammonium salt 11. 1 reacted with BF₃ · Et₂O at both imino nitrogen atoms with formation of the bis-BF₃-adduct 12 . The X-ray structure determination of phenylphosphonic acid-bis(N′,N′,N″,N″-tetramethylguanidinide) 3 shows shortened PN-bonds and widened PNC-angles, consistent with the partial double bond character of the PN-bond.     

Zur Reaktion von Diphenoxyphosphorylchlorid mit N,N-disubstituierten Harnstoffen – Bildung von phosphorylierten Biuret-Verbindungen

Reaction of Diphenoxyphosphorylchloride with N,N-disubstituted Ureas – Formation of Phosphorylated Biuret Compounds N′,N′-disubstituted N-diphenoxyphosphorylureas, (PhO)₂P(O)? NH? CO? NR¹R² (R¹ = R² = Et, 1 ; n-Pr, 2 ; n-Bu, 3 ; i-Bu, 4 ; R¹ = Me and R² = Ph, 5 ) as well as phosphorylated biuret compounds, (PhO)₂P(O)? NH? CO? NH? CO? NR¹R² are obtained in the reaction of diphenoxyphosphorylchloride with N,N-disubstituted ureas and triethylamine. The biuret derivatives are formed via (PhO)₂P(O)NCO. Their yield rises if the reaction is carried out without amine. The X-ray crystal structure analysis of (PhO)₂P(O)? NH? CO? NH? CO? NPr₂, 8 , shows that dimers exist in the crystal with intermolecular as well as intramolecular hydrogen bonds. The framework formed by atoms P? N1? C1(O4)? N2? C2(O5)? N3(C3)C6 is planar. The existence of a rotation barrier along the bond C2–N3 was detected by NMR spectroscopy.     

Synthesis and Crystal Structures of O‐2′,3′‐Cyclic Cyclopentanone and Cyclohexanone Ketals of the Cytostatic 5‐Fluorouridine

The synthesis of two O‐2′,3′‐cyclic ketals, i.e., 5 and 6 , of the cytostatic 5‐fluorouridine ( 2 ), carrying a cyclopentane and/or a cyclohexane ring, respectively, is described. The novel compounds were characterized by ¹H‐, ¹⁹F‐, and ¹³C‐NMR, and UV spectroscopy, as well as by elemental analyses. Their crystal structures were determined by X‐ray analysis. Both compounds 5 and 6 show an anti‐conformation at the N‐glycosidic bond which is biased from +ac to +ap compared to the parent nucleoside 2 . The sugar puckering is changed from ^2′E to _3′E going along with a reduction of the puckering amplitude τ_m by ca. 10–13° due to the ketalization. The conformation about the sugar exocyclic bond C(4′)? C(5′) of 5 and 6 remains unchanged, i.e., g⁺, compared with compound 2 .     

Reactions of N-(N′,N′,N″,N″-tetramethyl)guanidinyl-substituted Phosphines with Organoelement Chlorides involving Phosphorus,Sulfur, and Selenium; Formation of Stable Phosphino-, Thio-, and Selenophosphonium Salts

By reaction of N-(N′,N′,N″,N″-tetramethyl)guanidinyl-substituted phosphines with diorganochlorophosphines, organodichlorophosphines, p-tolylsulfenylchloride and phenylselenylchloride a variety of stable phosphonium chlorides with a P–E (E = P, S, Se) bond were obtained. In one case, performing this reaction in the presence of sodium tetraphenylborate led to the corresponding phosphonium tetraphenylborate. All compounds were characterised by multinuclear NMR and elemental analysis. The selenophosphonium chloride 4 a of the trihydrate was further characterised by a single crystal X-ray analysis. The P–Se bond is very long [193.0(3), 193.3(3) pm in two independent fomula units]. The water molecules and the chloride anions form hydrogen bonded layers.     

(O,O′)-Diorganodithiophosphatophenyltellur(II)- und Tris[(O,O′)-diorganodithiophosphato]phenyltellur(IV)-Verbindungen; Kristallstruktur von Tris[(O,O′)-diphenyldithiophosphato]phenyltellur(IV)

(O,O′)-Diorganodithiophosphatophenyltellurium(II)- and Tris[(O,O′)-diorganodithiophosphato]phenyltellurium(IV) Compounds; Crystal Structure of Tris[(O,O′)-diphenyldithiophosphato]phenyltellur(IV) The title compounds are available by reaction of trichlorophenyltellurium(IV) respectively iodophenyltellurium(II) with the sodium or ammonium salts of (O,O′)-diorganodithiophosphorus acids in various solvents. The resulting tellurium(IV) compounds have a pronounced tendency towards reductive elimination of bis[(O,O′)-diorganothiophosphoryl]disulfanes [S₂P(OR)₂]₂ in solution. In contrast, the tellurium(II) compounds are stable, although they are disintegrated to diphenylditellane and [S₂P(OR)₂]₂ on prolonged standing in chlorinated hydrocarbons. Crystals of tris[(O,O′)-diphenyldithiophosphato]phenyltellurium(IV) are monoclinic (space group P2₁/c) with the cell constants: a = 1 039.2(1), b = 1 037.9(3), c = 4 205.0(1) pm, β = 95.273(1)°, V = 4 516.42(9)X10⁶ pm³, Z = 4. The compound appears to be monomeric in the solid state forming a distorted pentagonal bipyramid. The stereochemical influence of the lone pair of electrons causes the axial (i. e. C1? Te? S4) angle to be 156.6(1)° rather than the theoretical 180°.     

Metallderivate von Molekülverbindungen. VIII. catena-Poly[(2,5,8-trioxanonan-O2,O5) lithium-methylphosphanid] — eine Verbindung mit meso-Helix-Struktur

Metal Derivatives of Molecular Compounds. VIII. catena-Poly[(2,5,8-trioxanonane-O²,O⁵) lithium-methylphosphanide] — a Compound with a meso-Helix Structure Studies of Fritz et al. [10] showed methylphosphane to be lithiated at ?60°C in 1,2-dimethoxyethane or bis(2-methoxyethyl) ether solution by stoichiometric amounts of lithium n-butanide in n-hexane. After removing the hydrocarbons almost completely by distillation and cooling the solutions to ?60°C again, colourless square crystals of (1,2-dimethoxyethane-O,O′)lithium ( 1 ) and (2,5,8-trioxanonane-O²,O⁵)lithium methylphosphanide ( 2 ) precipitate. As shown by an X-ray structure determination (monoclinic, P2₁/n; a = 805.5(1); b = 1820.6(2); c = 851.5(1) pm; β = 116.76(1)° at ?100 ± 3°C; Z = 4 formula units; R = 0.034) complex 2 forms a polymer which has the shape of an up to now scarcely noted meso-helix. Four-coordinated lithium is bound to two phosphorus (P? Li 252.9 and 253.2 pm; P? Li? P 131.8°; Li? P? Li 132.1°) and to two oxygen atoms (Li? O 203.9 and 206.8; O …? O 270.7 pm; O? Li? O 82.5°) of the inherently tridentate 2,5,8-trioxanonane ligand. As compared to the standard value (185 pm) the P? C distance (187.4 pm) is slightly lengthened. Structure determinations of (2,5,8-trioxanonane-O²,O⁵,O⁸) lithium 1-(phenylsulfonyl)alkyl compounds published some years ago [26, 27], allow a comparison of molecular parameters characteristic for the twofold or threefold coordinating chelate ligand.     

首次合成来源于鼠李属植物中的两个新颖的蒽环鼠李糖苷，2’, 3’-Di-O-acetylfrangulin A 和 Prinoidin

首次全合成来源于鼠李属植物中的两个天然产物2’, 3’-di-O-acetylfrangulin A (1) 和 prinoidin (2),它们对KB细胞表现出较好的细胞毒活性。通过1H NMR, 13C NMR, 1H-1H COSY, HMQC 和 HMBC确证了两个化合物的结构。     

Alkylidinphosphane und -arsane. II. Über die Oxydation des Lithoxy-methylidinphosphans PC?O?Li mit Schwefeldioxid und Iod

Alkylidynephosphanes and -arsanes. II. Oxydation of Lithoxy-methylidynephosphane P?C? O? Li with Sulphur Dioxide and Iodine At ?50°C bis(1,2-dimethoxyethane-O,O′)lithoxymethylidynephosphane P?C? O? Li(dme)₂^1,2) ( 1 a ) [2] reacts almost quantitatively with sulphur dioxide or iodine in 1,2-dimethoxyethane solution to give bis(1,2-dimethoxyethane-O,O′)bis(tetrahydrofuran-O)(μ-1,2,4-triphospholo[1,2-a]-1,2,4-triphosphol-1,3,5,7-tetraonato(2?)-O¹,O⁷:O³,O⁵)dilithium ( 2 a ) and lithium dithionite or iodide respectively. From the reaction with sulphur dioxide the crystalline, pale yellow compound is obtained in 40% yield. The formation of the unusual anionic heterocycle, built up of four PCO units, may be explained by an oxydation of two [P?C? O]^? species first, followed by a nucleophilic attack of two other [P?C? O]^? anions and coupled ?intramolecular”? cycloaddition reactions. In the ³¹P{¹H} nmr spectrum two phosphorus atoms each of coordination number two and three give rise to two triplets with chemical shift values of 81.4 and 36.9 ppm and a ²J(PP) coupling constant of 31.7 Hz; the ¹³C{¹H} resonances of the [(PCO)₄]^2? anion come from an ABMM′X spin system, the X part being discussed in detail. An X-ray structure determination {Cmcm; a = 1 277.14(11); b = 1 487.7(2); c = 1 556.94(11) pm at ?100 ± 3°C; Z = 4 molecules; R₁ = 0.061; wR₂ = 0.150} shows compound 2 a to crystallize as a neutral complex of symmetry mm2. The anionic part of the molecule consists of two anellated 1,2-dihydro-5-oxo-1,2,4-triphosphol-3-olate rings which share the central P? P unit (P1? P1′ 215.3; P1–C1 189.1; C1 P2 178.4; C1 O1 123.9pm; C1? P1? P1′ 98.4; Cl? P1? C1″ 91.2; C1 P2 C1′ 98.7°). Thus compound 2a may be assigned to the group of P? P heterocycles with a butterfly structure [71–75] as well as to the well-known diacylphosphanides taking into account, however, the unusual E,E configuration of both O?C? P?C? O^? units. The lithium cations are square pyramidally coordinate (Li? O 193.5 to 209.1 pm), each additionally binding an 1,2-dimethoxyethane and a tetrahydrofuran molecule.     

Synthesis and Ni(0)-catalyzed oligomerization of isomeric 4,4‴-dichloroquaterphenyls

4,4?-Dichloro-1,1′ : 2′,1″ : 2″,1?-quaterphenyl ( 9 ), 4,4?-dichloro-1,1′ : 3′,1″ : 3″,1?-quaterphenyl ( 10 ), and 4,4?-dichloro-1,1′ : 4′,1″ : 4″,1?-quaterphenyl ( 11 ) were synthesized by Pd (0) catalyzed cross-coupling reaction of 4-chlorobenzeneboronic acid with 2,2′-, 3,3′-, and 4,4′-bis (trifluoromethanesulfonyloxy)biphenyl respectively. 4,4?-Dichloro-1,1′ : 2′,1″ : 2″,1?-quaterphenyl ( 9 ) and 4,4?-dichloro-1,1′ : 3′,1″ : 3″,1?-quaterphenyl ( 10 ) were oligomerized by Ni(0) catalyzed homocoupling reaction to yield white and soluble oligophenylenes. © 1993 John Wiley & Sons, Inc.     

Alkylidinphosphane und -arsane. I [P ≡ C?S]−[Li(dme)3]+ – Synthese und Struktur

Alkylidynephosphanes and -arsanes. I [P ≡ C? S]^?[Li(dme)₃]⁺ – Synthesis and Structure O,O′-Diethyl thiocarbonate and bis(tetrahydrofuran)-lithium bis(trimethylsilyl)phosphanide dissolved in 1,2-dimethoxyethane, react below 0°C to give ethoxy trimethylsilane and tris(1,2-dimethoxyethane-O,O′)lithium 2λ³-phosphaethynylsulfanide – [P≡C? S]^? [Li(dme)₃]⁺ – ( 1a ). Apart from bis(trimethylsilyl)sulfane or carbon oxide sulfide, dark red concentrated solutions of λ³-phosphaalkyne 1 are also obtained from reactions of carbon disulfide with bis(tetrahydrofuran)-lithium bis(trimethylsilyl)phosphanide or with the homologous lithoxy-methylidynephosphane ( 2 ) [1]. The ir spectrum shows two absorptions at 1762 and 747 cm^?1 characteristic for the P≡C and C? S stretching vibrations. The nmr parameters {δ(³¹P) ? 121.3; δ(¹³C) 190.8 ppm; ¹J_CP 18.2 Hz} resemble much more values of diorganylamino-2λ³-phosphaalkynes than those of bis(1,2-dimethoxyethane-O,O′)lithoxy-methylidyne-phosphane ( 2a ). As found by an X-ray structure analysis (P2₁/c; a = 1192.6(16); b = 1239.1(19); c = 1414.8(26) pm; β = 105.91(13)° at ?100 ± 3°C; Z = 4 formula units; wR = 0.064) of pale yellow crystals (mp. + 16°C) isolated from the reaction with O,O′-diethyl thiocarbonate, the solid is built up of separate [P≡C? S]^? and [Li(dme)₃]⁺ ions. Typical bond lengths and angles are: P≡C 155.5(11); C? S 162.0(11); Li? O 206.4(17) to 220.3(20) pm; P≡C? S 178.9(7)°.     

Synthesis,Configuration, and Antimicrobial Properties of Novel Substituted and Cyclized ‘2′,3″‐Thiazachalcones’

Nine new thiazachalcone‐based drugs, compounds 1 – 9 , were prepared and fully characterized. The configurations of the photochemical‐dimerization products 7 – 9 were rationalized by semi‐empirical calculations. Both the experimental data and the theoretical calculations showed that the δ‐truxinic acid type dimer is the most stable isomer of all. All compounds were tested for their antibacterial and antifungal activities. The N‐alkylated congeners 4 – 6 showed strong antimicrobial activities against various bacteria and a yeast‐like fungus. The MIC and MBC values were as low as 0.1 μg/ml. All the compounds were active against the Gram‐positive bacterium Staphylococcus aureus.     

Acyl- und Alkylidenphosphane. XXXII [1, 2]. Di-cyclo-hexoyl- und Diadamant-1-oylphosphan — Keto-Enol-Tautomerie und Struktur

Acyl- and Alkylidenephosphines. XXXII. Di-cyclohexoyl- and Diadamant-1-oylphosphine – Keto-Enol Tautomerism and Structure Lithium dihydrogenphosphide · DME (¹) [12] and cyclo-hexoyl or adamant-1-oyl chloride react in a molar ratio of 3:2 to give lithium di-cyclo-hexoylphosphide · DME and the corresponding diadamant-1-oylphosphide.2THF (¹) resp. Treatment of these two compounds with 85% tetrafluoroboric acid. diethylether adduct yields di-cyclo-hexoyl- ( 1b ) and diadamant-1-oylphosphine ( 1c ). In nmr spectroscopic studies 1b over a range of 203 to 343 K, a strong temperature dependence of the keto-enol equilibrium is found; thermodynamic data characteristic for the formation of the enol tautomer (ΔH⁰ = ?4.3 kJ. mol^?1; ΔS⁰ = ?9.2 J. mol^?1. K (^?1) are compared of 1,3-diketones. The enol tautomer of diadamant-1-oylphosphine ( E-1c ) as obtained from a benzene solution in thin colourless plates, crystallizes in the monoclinic space group P2₁/c {a = 722.2(2); b = 1085.5(4); c = 2434.8(5) pm; ß = 96.43(2)° at –100 ± 3°C; Z = 4}. An X- ray structure analysis (R_w = 0.033) shows bond lengths and angles to be almost identical within the enolic system (P? C 179/180; C? O 130/129; C? C(adamant-1-yl) 152/153 pm; C? P? C 99°; P? C? O 124°/124°; P? C? C 120°/120°; C? C? O 116°/116°. The geometry of the very strong, but probably asymmetric O‥H‥O bridge is discussed (O? H 120/130, O‥O 245 pm).     

Two Bulky Conjugated 4′‐(4‐Hydroxyphenyl)‐4,2′:6′,4′′‐terpyridine‐based Layered Complexes: Synthesis,Structure, and Photocatalytic Hydrogen Evolution Activity

Two new layered complexes with the formulas of {[Cu(H₂O)(HL)₂Cl](NO₃)}_n ( 1 ) and {[Cu(H₂O)₂(HL)₂](NO₃)₂}_n ( 2 ) were solvothermally synthesized by the reactions of the bulky conjugated 4′‐(4‐hydroxyphenyl)‐4,2′:6′,4′′‐terpyridine ligand (HL) with different Cu^II salts, which were further used as photocatalysts to achieve hydrogen production from water splitting. Single‐crystal structural analyses reveal that both complexes feature coplanar (4 4) layers with different connection manners between the HL extended Z‐shaped chains. More interestingly, 1 possessing more negative conduction band potential and higher structural stability exhibits a large hydrogen production rate of 2.43 mmol · g^–1 · h^–1, which is four times higher than that of 2 . Thus, the Cu^II‐based coordination polymers modified by the bulky conjugated organic ligand can become potentially promising non‐Pt photocatalysts for hydrogen production from water splitting.     

A Novel,One‐Pot Four‐Component Route to 2′‐Thioxo‐2′,3′‐dihydrospiro[indole‐3,6′‐[1,3]thiazin]‐2‐one Derivatives

An efficient route to 2′,3′‐dihydro‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives is described. It involves the reaction of isatine, 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one, and different amines in the presence of CS₂ in dry MeOH at reflux (Scheme 1). The alkyl carbamodithioate, which results from the addition of the amine to CS₂, is added to the α,β‐unsaturated ketone, resulting from the reaction between 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one and isatine, to produce the 3′‐alkyl‐2′,3′‐dihydro‐4′‐phenyl‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives in excellent yields (Scheme 2). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

The antispermatogenic activity of some phenylbismuth(III) O,O′‐dialkyldithiophosphates

Ten dialkyldithiophosphate derivatives of phenylbismuth(III) of the type, Ph_(3–n)Bi[S(S)P(OR)₂]_n [where n = 1; R = Me( 1 ), Et( 2 ), Pri( 3 ), Prⁿ( 4 ) and Buⁿ( 5 ); n = 2; R = Me( 6 ), Et( 7 ), Prⁱ( 8 ), Prⁿ( 9 ) and Buⁿ( 10 )] have been synthesized by the reactions of triphenylbismuth(III) with corresponding dialkyldithiophosphoric acids in 1:1 and 1:2 stoichiometric ratios, respectively, in stirred benzene solution. The newly synthesized brown colored compounds, 1–10 have been characterized by elemental analyses, molecular weight measurements, IR and NMR (¹H, ¹³C and ³¹P) spectral studies. The ligand diethyldithiophosphoric acid, [(C₂H₅O)₂P(S)SH], and its organobismuth(III) derivatives, compounds 2 and 7 were administered to adult male rats by oral gavage at the dose of 25 mg per kg body weight per day, for 60 days, and their effects were evaluated and compared for changes in testicular morphology, circulatory concentrations of testosterone, FSH and LH, sperm dynamics, fertility index and testicular cell population dynamics. Copyright © 2007 John Wiley & Sons, Ltd.     

Die Chelatbildung von N-Tris(2-aminoethyl)amin-N′,N′,N″,N″,N‴,N‴-hexaessigsäure (H6TTAHA) und N-(Pyrid-2-yl-methyl)ethylendiamin-N,N′,N′-triessigsäure (H3PEDTA) mit Gadolinium(III) – Synthesen,Komplexstabilität und NMR-Relaxivität

Chelate Formation of N-Tris(2-aminoethyl)amine-N′,N′,N″,N″,N?,N?-hexaacetic Acid (H₆TTAHA) and N-(Pyrid-2-yl-methyl)ethylenediamine-N,N′,N′-triacetic Acid (H₃PEDTA) with Gadolinium(III) – Syntheses, Stability Constants, and NMR-Relaxivities The chelate formation of N-tris(2-aminoethyl)amine-N′,N′,N″,N″,N?,N?-hexaacetic acid (H₆TTAHA) and N-(pyrid-2-yl-methyl)ethylenediamine-N,N′,N′-triacetic acid (H₃PEDTA) with gadolinium(III) has been studied potentiometrically in aqueous solution at 25°C and μ = 0.1 (KCl). [Gd(TTAHA)]^3?: 1gβ_M/ML = 19.0; {H[Gd(TTAHA)]}^2?: 1gK_H/MHL = 8.30; [Gd(PEDTA)]: 1gβ_M/ML = 15.56. Both 1 : 1 gadolinium(III) complexes were isolated as Na₂H[Gd(C₁₈H₂₄N₄O₁₂)] · 3.5 H₂O and [Gd(C₁₄H₁₆N₃O₆)] · 3 H₂O, respectively. Their ¹H-NMR relaxivities [1 · mmol^?1 · s^?1] ({H[Gd(TTAHA)]}^2?: 9.5; [Gd(PEDTA)]: 8.8) offer promising applications for ¹H-NMR imaging.     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).     

Bis(1,2-dimethoxyethan-O,O′)lithium-phosphanid, -arsanid und -chlorid – drei neue Vertreter des Bis(1,2-dimethoxyethan-O,O′)lithium-bromid-Typs

Metal Derivatives of Molecular Compounds. IX. Bis(1,2-dimethoxyethane- O,O′ )lithium Phosphanide, Arsanide, and Chloride – Three New Representatives of the Bis(1,2-dimethoxyethane- O,O′ )lithium Bromide Type Experiments to obtain thermally unstable lithium silylphosphanide at –60 °C from a 1,2-dimethoxyethane solution resulted in the isolation of its dismutation product bis(1,2-dimethoxyethane-O,O′)lithium phosphanide ( 1 ). The homologous arsanide 2 precipitated after a frozen solution of arsane in the same solvent had been treated with lithium n-butanide at –78 °C. Unexpectedly, too, the analogous chloride 3 and bromide 4 were formed in reactions of 1-chloro-2,2-bis(trimethylsilyl)-1λ³-phosphaethene with (1,2-dimethoxyethane-O,O′)lithium bis(trimethylsilyl)stibanide and of lithium 1,2,3,4,5-pentaphenyl-2,3-dihydro-1λ³-phosphol-3-ide with ω-bromostyrene, respectively. The monomeric complexes 1 {–100 ± 3 °C; a = 1391.1(4); b = 809.8(2); c = 1249.1(3) pm; β = 102.84(2)°}, 2 {–100 ± 3 °C; a = 1398.3(4); b = 819.8(3); c = 1258.5(4) pm; β = 103.35(2)°} and 3 {–100 ± 3 °C; a = 1308.4(2); b = 788.2(1); c = 1195.6(1) pm; β = 95.35(1)°} crystallize in the monoclinic space group C2/c with four solvated ion pairs in the unit cell; they are isotypic with bis(1,2-dimethoxyethane-O,O′)lithium bromide ( 4 ) {–73 ± 2 °C; a = 1319.0(2); b = 794.1(1); c = 1214.3(2) pm; β = 96.22(1)°}, already studied by Rogers et al. [13] at room temperature. The neutral complexes show a trigonal bipyramidal configuration of symmetry C₂, pnicogenanide or halide anions occupying equatorial sites {Li–P 260.4(4); Li–As 269.8(6); Li–Cl 238.6(7); Li–Br 256.3(10) pm} and the chelate ligands spanning equatorial and axial positions {Li–O_eq 205.4(4) to 207.4(4); Li–O_ax 208.9(3) to 215.5(2) pm}. The coordination within the (dme)₂Li fragment, the Li–X distances (X = P, As, Cl, Br), the structure of the chelate rings, and the packing of the neutral complexes are discussed in detail.     

Synthesis and Properties of N,N′‐Bis(difuroxano [3,4‐b:3′,4′‐d]phenyl)oxalic Amide

N,N′‐Bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide was synthesized via acylation, nitration, azidation, and pyrolysis‐denitrogenation from the starting materials of oxalyl chloride and 3,5‐dichloroaniline, under mild reaction conditions, with the yields of 81.0%, 82.0%, 86.0% and 81.7% respectively. The title compound and its precursors were characterized by ¹H NMR, IR, MS, and elemental analysis. The title compound has a density of 1.92 g·cm^?3 by a suspension method, a standard formation enthalpy of 979 kJ·mol^?1 calculated by Gaussian programs, a detonation velocity of 8.17 km·s^?1, and a detonation pressure of 31 GPa obtained by Kamlet Equation. The thermal decomposition reactions of the title compound at different heating rates were tested by differential scanning calorimetry (DSC). The kinetics parameters of the pyrolysis of the compound were calculated by Kissinger's method. The values of apparent activation energy (E_a) and pre‐exponential constant (A) were 226.7 kJ·mol^?1 and 10^23.17 s^?1 respectively. It was presupposed that N,N′‐bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide would be a promising high energetic explosive with low sensitivity.