Dynamics and energetics of the self-assembly of a hydrophobically modified polyelectrolyte: Naphthalene-labeled poly(acrylic acid)

Steady-state and time-resolved fluorescence studies were performed on aqueous solutions of poly(acrylic acid) hydrophobically modified with two very different levels of naphthalene (Np). It is demonstrated that unique information on association phenomena involving hydrophobe-modifed polymers can be obtained from an extended fluorescence study by using data for a less-modified polymer as a reference. For the more highly modified polymer, the presence of excited-state (as well as ground-state) dimers in addition to monomer emission due to locally excited naphthalene gives evidence for hydrophobic association between naphthalene groups. This association becomes, as expected, much less important at higher pH due to the electrostatic repulsion between different chain segments. However, it is noted that even at high pH there is a significant self-association. The coexistence of static and dynamic quenching phenomena of the Np monomer label was also revealed in the time-resolved fluorescence data. The data are compatible with the existence of two types of monomers and one excimer and suggest that the essential contribution to the monomer emission comes from isolated chromophores, whereas excimer formation arises from both a dynamic route (excited Np chromophores able to produce a dynamic excimer) and a static route (excitation of ground-state Np dimers). At room temperature, the dissociative reaction, excimer-to-monomer, can be neglected, and thus the rate constant for excimer formation and decay could be obtained with and without considering the influence of preformed dimers. Temperature has shown to induce different behavior in the polymer photophysics. In the case of the less-labeled polymer, the decays were found to be single-exponential with the fluorescence lifetime decreasing with increasing temperature. From the temperature dependence of the steady-state fluorescence data, the activation energy for excimer formation and the binding energy of the excimer were evaluated at different pH values, through the Stevens-Ban-type plots of the excimer-to-monomer intensity ratio. With the time-resolved data, measured in the temperature range of 5-60 degrees C, it was possible to extract the intrinsic activation energies for excimer formation. The thermodynamic driving force for the intrapolymeric association was found to be dependent on a balance between hydrophobic and electrostatic interactions, which are dependent on the pH, temperature, and hydrophobic content of the polymer.     

Dynamics of short as compared with long poly(acrylic acid) chains hydrophobically modified with pyrene, as followed by fluorescence techniques

New low and high molecular weight poly(acrylic acid), PAA, 2000 g mol(-1) and 450,000 g mol(-1), respectively, were tagged with pyrene (low and high contents of probe) and its behaviour in solution was investigated using absorption and fluorescence (steady-state and time-resolved) techniques. Fluorescence data shows that the degree and level of intramolecular association strongly depends on the molecular weight. With the short pyrene-labeled PAA chains in aqueous solution, the excimer-to-monomer fluorescence ratio I(E)/I(M) decreases with the increase of pH, oppositely to the increase in the I(E)/I(M) ratio with the increase in pH previously observed with the long chain PAA. Time-resolved data suggest that excimer formation with the short pyrene-labeled PAA polymers (ca. 28 acrylic acid monomers per chain) in water is largely due to excitation of Ground State Dimers, GSD. The increment of pH, and the consequent gradual ionization of the carboxylic groups in the chain, initially increases the fraction of GSD, possibly due to the occurrence of special micelle-like chain conformations, inside which the pyrene units are accommodated. A further increase of the pH above the pK(a) values, resulting in the full ionization of carboxylic groups, apparently destabilizes such chain conformations, which leads to a pH effect on the photophysical properties identical to that of the long chain polymers. In water, the dynamic data shows the existence of two excimers coexisting with two monomer classes. In methanol and dioxane (good solvents for the pyrene probe) at room temperature, where one excimer and two monomers are present, all rate constants could be obtained, as well as the fractions of ground-state species. It is thus shown that different types of interactions are produced with small- and long-sized PAA polymers, i.e., the size of the polymer matters.     

Interaction of pyrene-end-capped poly(ethylene oxide) with bovine serum albumin and human serum albumin in aqueous buffer medium: a fluorometric study

The photophysical behavior of a hydrophobically tailored water-soluble polymer, pyrene-end-capped poly(ethylene oxide) (PYPY), has been studied in aqueous buffered bovine serum albumin (BSA) and human serum albumin (HSA) media. In buffered aqueous solution the polymer shows dual emission corresponding to the monomer and the excimer of pyrene moiety. The relative intensity of the monomer to the excimer emission shows interesting variation with the addition of BSA and HSA and is indicative of significant interaction of these albumin proteins with the polymer. The binding interaction has been shown to have a prominent role on the steady state fluorescence anisotropy of the two emission bands. Attempt has been made to determine the micropolarities of the protein microenvironments from a comparison of the variation of the monomer to excimer relative fluorescence intensities of the probe in water–dioxane mixtures with varying composition.     

Singlet energy migration and excimer formation in polymers of 2-tert-butyl-6-vinylnaphthalene

The homopolymer of 2-tert-butyl-6-vinylnaphthalene (BVN) and its copolymers with styrene were prepared to examine the effects of the bulky tert-butyl groups on singlet energy migration and excimer formation among the naphthalene chromophores. The intensity of naphthalene excimer emission relative to that of monomer emission was found to depend linearly on the concentration of the potential excimer forming site, i.e., the BVN dyad fraction of the polymer. The rate of fluorescence quenching by biacetyl, on the other hand, increased only slightly with the increase in the BVN content. These results are consistent with the slow energy hopping model and suggest that the neighboring naphthalene chromophores are virtually isolated from one another owing to the unfavorable interactions of the tert-butyl groups.     

ALTERNATING COPOLYMERS CONTAINING AN AROMATIC CHROMOPHORE IN EVERY MONOMER UNIT. 2. EXCIMER FORMATION AND INTRAMOLECULAR ENERGY MIGRATION IN ALTERNATING COPOLYMERS OF NAPHTHYLALKYL METHACRYLATE AND VINYLNAPHTHALENE

A series of alternating and random copolymers of 2-naphthylal-kyl methacrylates (NpMMA and NpEMA) and 2-vinylnaphtha-lene (VNp) were synthesized, and their fluorescence properties in tetrahydrofuran (THF) were compared. All of the alternating copolymers containing NpMMA or NpEMA showed a weak ex-cimer emission, indicating that excimer formation between naph-thyl (Np) chromophores in the alternating methacrylate sequences cannot be perfectly inhibited. No distinct difference in the fluorescence from the NpMMA and VNp moieties in poly(NpMMA-alt-VNp) (a-NpVNp) suggests that practically the same chromophores are aligned along the whole polymer chain. This observation is sharp in contrast with the corresponding phenyl polymers exhibiting different spectral features. Fluorescence quenching studies, however, showed no enhancement of the quenching efficiencies for a-NpVNp among the pres-ent polymers. Therefore, energy migration between the nearest-neighboring Np chromophores would inefficiently occur, though this polymer has the highest density of chromophores.     

Pyrene excimer signaling molecular beacons for probing nucleic acids

Molecular beacon DNA probes, containing 1-4 pyrene monomers on the 5' end and the quencher DABCYL on the 3' end, were engineered and employed for real-time probing of DNA sequences. In the absence of a target sequence, the multiple-pyrene labeled molecular beacons (MBs) assumed a stem-closed conformation resulting in quenching of the pyrene excimer fluorescence. In the presence of target, the beacons switched to a stem-open conformation, which separated the pyrene label from the quencher molecule and generated an excimer emission signal proportional to the target concentration. Steady-state fluorescence assays resulted in a subnanomolar limit of detection in buffer, whereas time-resolved signaling enabled low-nanomolar target detection in cell-growth media. It was found that the excimer emission intensity could be scaled by increasing the number of pyrene monomers conjugated to the 5' terminal. Each additional pyrene monomer resulted in substantial increases in the excimer emission intensities, quantum yields, and excited-state lifetimes of the hybridized MBs. The long fluorescence lifetime ( approximately 40 ns), large Stokes shift (130 nm), and tunable intensity of the excimer make this multiple-pyrene moiety a useful alternative to traditional fluorophore labeling in nucleic acid probes.     

Spectroscopy and coordination chemistry of a new bisnaphthalene-bisphenanthroline ligand displaying a sensing ability for metal cations

A new fluorescent macrocyclic structure (L1) bearing two naphthalene units at both ends of a cyclic polyaminic chain containing two phenanthroline units was investigated with potentiometric and fluorescence (steady-state and time-resolved) techniques. The fluorescence emission spectra show the simultaneous presence of three bands: a short wavelength emission band (naphthalene monomer), a middle emission band (phenanthroline emission), and a long-wavelength band. All three bands were found to be dependent on the protonation state of the macrocyclic unit (including the polyaminic and phenanthroline structures). The existence of the long-wavelength emission band is discussed and is shown to imply that a bending movement involving the two phenanthroline units leads to excimer formation. This is determined by comparison with the excimer emission formed by intermolecular association of 1,10-phenanthroline. With ligand L1, excimer formation occurs only at pH values above 4. At very acidic pH values, the protonation of the polyamine bridges is extensive leading to a rigidity of the system that precludes the bending movement. The interaction with metal cations Zn(II) and Cu(II) was also investigated. Excimer formation is, in these situations, increased with Zn(II) and decreased with Cu(II). The long-emission band is shown to present a different wavelength maximum, depending on the metal, which can be considered as a characteristic to validate the use of ligand L1 as a sensor for a given metal.     

疏水作用对光化学和光物理过程的影响 I: 不良溶剂中长链β-萘甲酸烷基酯的簇集和激基缔合物的形成

研究了不同链长的β-萘甲酸烷基酯(An)在乙二醇-水(EG-H2O)和二甲基砜-水(DMSO-H2O)混合溶剂中的荧光光谱, 以及添加物(无机盐、长链饱和烷烃、糖淀粉)对An荧光的影响. 长链An在混合溶剂中很容易形成激基缔合物, 表明疏水作用促使长链分子相互簇集. 测定了不同链长的分子发生簇集的临界浓度和临界溶剂组成. 分别添加长链烷烃和糖淀粉都能引起激基缔合物的荧光强度减弱和单体荧光强度的增强, 表明An和长链烷烃共簇集, 与糖淀粉形成包结物. 研究了在簇集体中An形成激基缔合物的动力学和热力学, 测定了激基缔合物形成和解离速率常数、活化能和热焓的变化. 证明了簇集体中基态发色基团之间并不具有激基缔合物的构型, 在一定温度下, 簇集体会发生相变.     

Photophysics of carbazole-containing systems. 1. Dilute solution behavior of poly(N-vinyl carbazole) and N-vinyl carbazole/methyl acrylate copolymers

Steady-state and time-resolved fluorescence techniques have been used to study the photophysical behaviors of poly(N-vinyl carbazole), PNVCz and a series of N-vinyl carbazole-methyl acrylate (NVCz-co-MA) copolymers in dilute solution as a function of both NVCz composition and temperature. A kinetic scheme, intended to describe intramolecular excimer formation across the entire NVCz composition range, is proposed. In low aromatic content copolymers, two monomer species (unquenched and quenched monomer) and two excimer species (the sandwich-like excimer and a higher energy excimer) exist. The contribution from monomer emission to the overall fluorescence decreases with increasing NVCz content through increased excimer formation: this is likely to be consequent upon (1) an increase in the number of excimer forming sites, and (2) increasing efficiency of energy transfer from the excited monomers to the excimer forming sites. In the homopolymer, PNVCz, the only emission that can be observed on a nanosecond timescale is excimeric. This fluorescence appears to originate from three excimer species (the sandwich-like excimer, and two higher energy forms). For the homopolymer, the current observations are consistent with the model proposed by Vandendriessche and De Schryver [Polym. Photochem. 7 , 153 (1986)]. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 963–978, 1997     

Immobilization of pyrene on quartz plate surface via a flexible long spacer and its sensing properties to dicarboxylic acids

It is known that polycyclic aromatic hydrocar-bons (PAHs) form excimer easily, and show both monomer and excimer emission in polar medium[1]. This character comes from their hydrophobic nature and plane structures. The ratio of the intensity of ex-cimer emission to that of monomer emission is a func-tion of distance between neighbouring PAHs in a sys-tem. It is not difficult to understand that many factors, such as the concentration of PAHs, temperature, pres-ence and concentration of othe…     

Fluorescence of 1,3-Di(1-pyrenyl)propane probe incorporated into human serum albumin protein enforced conformations of the probe

 Steady-state and time-resolved fluorescence spectra of 1,3-di(1-pyrenyl)propane (1Py-(3)-1Py) incorporated into macromolecules of human serum albumin (HSA), into micelles of dodecyltrimethylammo-nium chloride (DTAC), and dissolved in 1,4-dioxane were compared. The steady-state fluorescence spectra indicated that in all the mentioned environments, upon excitation of 1Py-(3)-1Py, light was emitted from the single pyrene chromophores (1Py^*) and from the 1Py, 1Py^* excimers. The time-resolved fluo-rescence emission registered at 480 nm (excimer emission) for 1Py-(3)-1Py in the DTAC micelles and dissolved in 1,4-dioxane allowed to monitor formation of excimer with time constant τ₁=40.0 ns and 9.6 ns, for 1Py-(3)-1Py in the DTAC micelles and in 1,4-dioxane, respectively. However, when the 1Py-(3)-1Py probe was located inside of the macromolecules of HSA, only the decay of emission was observed for excimer with our set-up (t>2 ns after excitation). The instantaneous formation of excimer, unrelated to the decay of monomer excitation, indicates that the considerable fraction of 1Py-(3)-1Py in the hydrophobic pockets of HSA is present as the ground state dimer. The red shift (Δλ=8 nm) and broadening of UV absorption for 1Py-(3)-1Py in HSA (when compared with absorption 1Py-(3)-1Py in 1,4-dioxane) and comparison of exci-tation spectra of 1Py-(3)-1Py in HSA and in 1,4-dioxane also indicate that label molecules bound to some sites of HSA are in the ground state in the dimer conformation. Moreover, the close values of the ratios of intensities of monomer emission to excimer emission, registered 2 ns (5 ns gate) after excitation pulse with duration 300 ps and at the steady-state conditions, indicate that the interconversion between conformers of 1Py-(3)-1Py inside of the macro-molecules of HSA is slow in comparison with the decay time of Py chromophore in the excited state in HSA (two-exponential decay with decay times τ₁=2.41 ns, τ₂=69.0 ns). Thus, ratios of the intensities of monomer and excimer emissions of 1Py-(3)-1Py in HSA do not allow to obtain any information on the local microfluidity inside of the protein macromolecules but could be used for discrimination between different conformations of the probe, possibly located in different protein pockets. Received: 29 April 1996 Accepted: 15 August 1996     

Hydrophobic effects on photophysical and photochemical processes: 1. Aggregation and excimer formation of alkyl β-naphthoates with long chain in poor solvents

The fluorescence spectra of alkyl β-naphthoates with various chain lengths (A_n) in DMSO-H₂O and ethylene glycol-water (EG-H₂O) mixtures were studied. The β-naphthoates with short chain show monomer fluorescence only in both solvent mixtures, while fluorescence spectra of long chain alkyl β-naphthoates are dominated by excimer emission. Addition of long chain hydrocarbon or amylose resulted in the reduction of excimer emission and enhancement of monomer fluorescence. All these experimental results supported intermolecular aggregation of long chain alkyl β-naphthoates in poor solvents. The kinetic parameters of the formation and dissociation of excimer as well as fluorescence polarization in aggregates were measured. These data provided an insight into the characteristics of aggregates.     

Effects of metal cation coordination on fluorescence properties of a diethylenetriamine bearing two end pyrene fragments

Fluorescence properties of a diethylenetriamine bearing two end pyrene fragments (L) have been studied in water, where effects of adding metal cations (Zn2+, Cd2+, Cu2+, Hg2+, Ag+) on the emission properties of L have been studied. Without metal cations, L shows dual-mode fluorescence consisting of monomer and excimer emissions. The monomer emission intensity (I(M)) is strong at acidic pH but decreases with a pH increase because of an electron transfer (ET) from the unprotonated nitrogen atoms to the excited pyrene fragment. The excimer emission is due to the static excimer formed via a direct photoexcitation of the intramolecular ground-state dimer (GSD) of the end pyrene fragments. The excimer emission intensity (I(E)) is weak at acidic pH but increases with a pH increase because of the GSD stability increase associated with the deprotonation of the polyamine chain. Addition of metal cations leads to I(M) decrease, where chelation-driven I(M) enhancement does not occur even with diamagnetic Zn2+ and Cd2+ at any pH. This is because a pyrene-metal cation pi-complex, formed via a donation of pi-electron of the pyrene fragment to the adjacent metal center, suppresses the monomer photoexcitation. I(E) also decreases upon addition of metal cations because the pyrene-metal cation pi-complex weakens pi-stacking interaction of the end pyrene fragments, leading to GSD stability decrease. The emission properties of L-Zn2+ complexes were studied by means of time-resolved fluorescence decay measurements, and the effects of adding a less-polar organic solvent were also studied to clarify the detailed emission properties.     

Aromatic molecules in restricted geometries: photophysics of naphthalene included in a cyclodextrin functionalized layered solid

The galleries of an Mg-Al layered double hydroxide have been functionalized by intercalation of carboxymethyl beta-cyclodextrin cavities. The anchored cavities form a random array of identical-sized hydrophobic nanopockets arranged in a bilayer fashion in the interlamellar space of the layered solid. Naphthalene molecules have been included within these cavities by partitioning from a polar solvent. The fluorescence from the included naphthalene shows an unusual behavior--the excimer to monomer emission intensity decreases with increasing concentration of included naphthalene. This is shown to be a consequence of the absence of translational mobility of the naphthalene--cyclodextrin adduct in the functionalized solid. Two types of included naphthalene have been identified: a preformed excimer-like species characterized by the absence of rise time in decay measurements and a monomeric species that is incapable of excimer formation due to the absence of suitably located included naphthalenes in its proximity. The concentration of each species and the enthalpy for excimer formation have been determined from the temperature variation of fluorescence intensities.     

Solvent-driven multiply configurable on/off fluorescent indicator of the pH window: a diethylenetriamine bearing two end pyrene fragments

Fluorescence behaviors of a simple-structured molecule (L), a diethylenetriamine bearing two end pyrene fragments, have been investigated in water. Effects of adding a less-polar organic solvent (acetonitrile: MeCN) on the emission behaviors have been studied by means of steady-state and time-resolved fluorescence measurements. L dissolved in water shows dual-mode fluorescence consisting of monomer and excimer emissions. The monomer emission shows an "on-off" intensity profile against the pH window (pH 2-12), whereas the excimer emission shows an "off-on" profile. Upon MeCN addition, the monomer emission maintains the "on-off" profile. In contrast, the "off-on" profile of the excimer emission is drastically changed: L shows two more types of profiles, "off-on-off-on" and "off-on-off", along with the MeCN concentration increase, thus behaving as a multiply configurable fluorescent indicator of the pH window. The MeCN-driven excimer emission switching of L is triggered by (i) the decrease in stability of the intramolecular ground-state dimer (GSD) formed between the end pyrene fragments, which suppresses the direct photoexcitation of GSD (suppression of the "static" excimer formation), leading to a decrease in the excimer emission intensity at basic pH; and (ii) the decrease in polarity of solution, which allows formation of a "dynamic" excimer via a monomer-to-excimer transition, resulting in an enhancement of the excimer emission intensity at acidic-neutral pH.     

Double Naphthalene‐Tagged Cyclodextrin‐Peptide Capable of Exhibiting Guest‐Induced Naphthalene Excimer Fluorescence

A cyclodextrin‐peptide hybrid (17NNβ) bearing two naphthalene units in the peptide side chain has been designed and synthesized as a novel chemosensor molecule. Circular dichroism study of the compound revealed that the peptide has α‐helix structure with a helix content of 41%. The peptide revealed both monomer and excimer emission and the intensity of the excimer emission increased while that of the monomer emission decreased upon addition of the guest compound. This behavior was observed for various guest molecules, suggesting that the system can be used for detecting molecules in aqueous solution.     

Excimer dissociation in poly(1-vinyl naphthalene)

Time-resolved fluorescence spectroscopy has been used to probe the formation and decay of excimeric sites in poly(1-vinyl naphthalene) in methylene chloride solution. Contrary to earlier reports, it has been found that reverse dissociation of excimers does occur appreciably at room temperature. Monomer fluorescence decay curves are thus represented by the sum of two exponential terms, and excimer curves by the difference in two exponentials. Lifetimes of 7.43 and 43.1 ns were obtained from the monomer and excimer fluorescence decay data.     

Solid-state fluorescence study of naphthalene adsorption on porous material

Naphthalene adsorption profile on porous materials was studied using solid-state fluorescence spectroscopy. When naphthalene crystals were simply mixed with porous crystalline cellulose (PCC), excimer emission of naphthalene was observed after 1 min of mixing, suggesting a drastic change in the naphthalene molecular environment during the mixing procedure. For the naphthalene-octadesyl silane (ODS)-80A or naphthalene-ODS-2 systems, the changes in adsorption profiles and fluorescence spectral pattern of naphthalene were similar to those of the naphthalene-PCC system. The final amounts of naphthalene adsorbed to ODS-80A and ODS-2 were 0.05 and 0.024 g/g adsorbent, respectively, even though the two materials had comparable values of specific surface area. The relative emission intensity (I(excimer)/I(monomer)) in the ODS-80A system was higher than that in the ODS-2 system when compared at the same amount of naphthalene adsorbed. It was concluded that the pore size of porous materials affected the naphthalene excimer formation on the surface.     

Ultrafast IR spectroscopy of polymeric cytosine nucleic acids reveal the long-lived species is due to a localised state

The decay pathways of UV-excited cytosine polymers are investigated using picosecond time-resolved infrared spectroscopy. Similar yields of a non-emissive (1)nπ* state are found in the single-stranded dC(30) polymer as in the dCMP monomer, but with a longer lifetime in the polymer (80 ps vs. 39 ps). A longer lifetime is also found in the d(CpC) dinucleotide. No evidence of excimer states is observed, suggesting that localised (1)nπ* excited states are the most significant intermediates present on the picosecond timescale.