Effects of Lewis number,density ratio and gravity on burning velocity and conditional statistics in stagnating turbulent premixed flames

DNS is performed to analyse the effects of Lewis number (Le), density ratio and gravity in stagnating turbulent premixed flames. The results show good agreement with those of Lee and Huh (Combustion and Flame, Vol. 159, 2012, pp. 1576–1591) with respect to the turbulent burning velocity, S_T, in terms of turbulent diffusivity, flamelet thickness, mean curvature and displacement speed at the leading edge. In all four stagnating flames studied, a mean tangential strain rate resulting in a mean flamelet thickness smaller than the unstretched laminar flame thickness leads to an increase in S_T. A flame cusp of positive curvature involves a superadiabatic burned gas temperature due to diffusive–thermal instability for an Le less than unity. Wrinkling tends to be suppressed at a larger density ratio, not enhanced by hydrodynamic instability, in the stagnating flow configuration. Turbulence is produced, resulting in highly anisotropic turbulence with heavier unburned gas accelerating through a flame brush by Rayleigh–Taylor instability. Results are also provided on brush thickness, flame surface density and conditional velocities in burned and unburned gas and on flame surfaces to represent the internal brush structures for all four test flames.     

A flamelet analysis of the burning velocity of premixed turbulent expanding flames

Direct numerical simulation is a very powerful tool to evaluate the validity of new models and theories for turbulent combustion. In this paper, direct numerical simulations of spherically expanding premixed turbulent flames in the corrugated flamelet regime are performed. The flamelet-generated manifold method is used to deal with detailed reaction kinetics. The numerical method is validated for both laminar and turbulent expanding flames. The computational results are analyzed by using an extended flame stretch theory. It is investigated whether this theory is able to describe the influence of flame stretch and curvature on the local burning velocity of the flame. If the full profiles of flame stretch and curvature through the flame front are included in the theory, the local mass burning rate is predicted accurately. The influence of several approximations, which are used in other existing theories, is studied. When flame stretch is assumed to be constant through the flame front or when curvature of the flame front is neglected, the theory fails to predict the local mass burning rate.     

Stratified turbulent Bunsen flames: flame surface analysis and flame surface density modelling

In this paper it is investigated whether the Flame Surface Density (FSD) model, developed for turbulent premixed combustion, is also applicable to stratified flames. Direct Numerical Simulations (DNS) of turbulent stratified Bunsen flames have been carried out, using the Flamelet Generated Manifold (FGM) reduction method for reaction kinetics. Before examining the suitability of the FSD model, flame surfaces are characterized in terms of thickness, curvature and stratification.

All flames are in the Thin Reaction Zones regime, and the maximum equivalence ratio range covers 0.1?φ?1.3. For all flames, local flame thicknesses correspond very well to those observed in stretchless, steady premixed flamelets. Extracted curvature radii and mixing length scales are significantly larger than the flame thickness, implying that the stratified flames all burn in a premixed mode. The remaining challenge is accounting for the large variation in (subfilter) mass burning rate.

In this contribution, the FSD model is proven to be applicable for Large Eddy Simulations (LES) of stratified flames for the equivalence ratio range 0.1?φ?1.3. Subfilter mass burning rate variations are taken into account by a subfilter Probability Density Function (PDF) for the mixture fraction, on which the mass burning rate directly depends. A priori analysis point out that for small stratifications (0.4?φ?1.0), the replacement of the subfilter PDF (obtained from DNS data) by the corresponding Dirac function is appropriate. Integration of the Dirac function with the mass burning rate m=m(φ), can then adequately model the filtered mass burning rate obtained from filtered DNS data. For a larger stratification (0.1?φ?1.3), and filter widths up to ten flame thicknesses, a β-function for the subfilter PDF yields substantially better predictions than a Dirac function. Finally, inclusion of a simple algebraic model for the FSD resulted only in small additional deviations from DNS data, thereby rendering this approach promising for application in LES.     

Conditional moment closure and transient flamelet modelling for detailed structure and NO x formation characteristics of turbulent nonpremixed jet and recirculating flames

This study has been mainly motivated to assess computationally and theoretically the conditional moment closure (CMC) model and the transient flamelet model for the simulation of turbulent nonpremixed flames. These two turbulent combustion models are implemented into the unstructured grid finite volume method that efficiently handles physically and geometrically complex turbulent reacting flows. Moreover, the parallel algorithm has been implemented to improve computational efficiency as well as to reduce the memory load of the CMC procedure. Example cases include two turbulent CO/H₂/N₂ jet flames having different flow timescales and the turbulent nonpremixed H₂/CO flame stabilized on an axisymmetric bluff-body burner. The Lagrangian flamelet model and the simplified CMC formulation are applied to the strongly parabolic jet flame calculation. On the other hand, the Eulerian particle flamelet model and full conservative CMC formulation are employed for the bluff-body flame with flow recirculation. Based on the numerical results, a detailed discussion is given for the comparative performances of the two combustion models in terms of the flame structure and NO _x formation characteristics.     

Flame front analysis of high-pressure turbulent lean premixed methane–air flames

An experimental study on lean turbulent premixed methane–air flames at high pressure is conducted by using a turbulent Bunsen flame configuration. A single equivalence ratio flame at Φ = 0.6 is explored for pressures ranging from atmospheric pressure to 0.9 MPa. LDA measurements of the cold flow indicate that turbulence intensities and the integral length scale are not sensitive to pressure. Due to the decreased kinematic viscosity with increasing pressure, the turbulent Reynolds numbers increase, and isotropic turbulence scaling relations indicate a large decrease of the smallest turbulence scales. Available experimental results and PREMIX code computations indicate a decrease in laminar flame propagation velocities with increasing pressure, essentially between the atmospheric pressure and 0.5 MPa. The u′/S_L ratio increases therefore accordingly. Instantaneous flame images are obtained by Mie scattering tomography. The images and their analysis show that pressure increase generates small scale flame structures. In an attempt to generalize these results, the variance of the flamelet curvatures, the standard deviation of the flamelet orientation angle, and the flamelet crossing lengths have been plotted against which is proportional to the ratio between the integral and Taylor length scales, and which increases with pressure. These three parameters vary linearly with the ratio between large and small turbulence scales and clearly indicate the strong effect of this parameter on premixed turbulent flame dynamics and structure. An obvious consequence is the increase in flame surface density and hence burning rate with pressure, as confirmed by its direct determination from 2D tomographic images.     

Time-averaging strategies in the finite-volume/particle hybrid algorithm for the joint PDF equation of turbulent reactive flows

The influence of time-averaging on bias is investigated in the finite-volume/particle hybrid algorithm for the joint PDF equation for statistically-stationary turbulent reactive flows. It is found that the time-averaging of the mean fluctuating velocity (TAu) leads to the same variances of the fluctuating velocity before and after the velocity correction, whereas without TAu the estimates are different, and an additional numerical dissipation rate is introduced for the turbulent kinetic energy (TKE). When 100 particles per cell are used without TAu, a large bias error is found to be involved in the unconditional statistics of the statistically-stationary solutions of two tested turbulent flames, the Cabra H₂/N₂ lifted flame and the Sandia piloted flame E. The use of TAu reduces this bias dramatically for the same number of particles per cell. The conditional statistics in these flames, however, are hardly affected by TAu. To a large extent, the effect of the bias error on the unconditional statistics is similar to the effect of increasing the model constant C _{ω 1} in the stochastic turbulence frequency model.     

Premixed turbulent flame front structure investigation by Rayleigh scattering in the thin reaction zone regime

Premixed turbulent flames of methane–air and propane–air stabilized on a bunsen type burner were studied using planar Rayleigh scattering and particle image velocimetry. The fuel–air equivalence ratio range was from lean 0.6 to stoichiometric for methane flames, and from 0.7 to stoichiometric for propane flames. The non-dimensional turbulence rms velocity, u′/S_L, covered a range from 3 to 24, corresponding to conditions of corrugated flamelets and thin reaction zones regimes. Flame front thickness increased slightly with increasing non-dimensional turbulence rms velocity in both methane and propane flames, although the flame thickening was more prominent in propane flames. The probability density function of curvature showed a Gaussian-like distribution at all turbulence intensities in both methane and propane flames, at all sections of the flame.The value of the term Dκ, the product of molecular diffusivity evaluated at reaction zone conditions and the flame front curvature, has been shown to be smaller than the magnitude of the laminar burning velocity. This finding questions the validity of extending the level set formulation, developed for corrugated flames region, into the thin reaction zone regime by increasing the local flame propagation by adding the term Dκ to laminar burning velocity.     

An experimental and numerical study on the adequacy of CH as a flame marker in premixed methane flames

The CH radical is frequently used as a flame marker because it is relatively short-lived and is present over a narrow region in flames. Discontinuities in the CH field are thus often interpreted as localized extinction of the flame. Recently, however, the adequacy of CH laser-induced fluorescence (LIF) as a flame marker was questioned by an experimental study of flame–vortex interactions in highly N₂-diluted premixed methane flames. We demonstrate both experimentally and numerically that anomalies in the transient response of CH in this earlier study were due to reactant composition variations in the vortex. In addition, we evaluate the adequacy of CH LIF as a flame marker over a much broader range of conditions. Previous numerical studies showed that heat release rate correlates reasonably well with peak [HCO] and the concentration product [OH][CH₂O], but poorly with [CH], in highly N₂-diluted premixed methane flames. Here, the correlation between heat release rate and CH is investigated both experimentally, by performing simultaneous measurements of CH, OH, and CH₂O LIF, and numerically. We consider undiluted and N₂-diluted premixed methane flames over a range of strain rates and stoichiometries. Results are reported for flames subjected to unsteady stretch and reactant composition variations. For all N₂-dilution levels considered, the peak CH LIF signal correlates poorly with heat release rate when the stoichiometry of the reactant mixture changes from rich to lean. However, when flames are subjected to stretch, the correlation between CH and heat release rate improves as the N₂-dilution level decreases. The correlation is reasonably good for undiluted flames with equivalence ratios of 0.8 < Φ < 1.2. This result is particularly encouraging, given the relevance of undiluted flames to practical applications, and it motivates further investigation of the parameter space for which difficulties may exist in using CH as a flame marker.     

Prediction of NO in turbulent diffusion flames using Eulerian particle flamelet model

The combustion characteristics for the turbulent diffusion flames using the unsteady flamelet concept have been numerically investigated. The Favre-averaged Navier–Stokes equations are solved by a finite volume method of SIMPLE type that incorporates the laminar flamelet concept with a modified k ? ε turbulence model. The NO formation is estimated by solving the Eulerian particle transport equations in a postprocessing mode. Two test problems are considered: CH₄/H₂/N₂ jet flame and CH₄/H₂ stabilised bluff body flame. The temperature and species profiles are well captured by the flamelet model. Two different chemical mechanisms (GRI 2.11 and 3.0) give nearly identical results for temperature and species except NO. The GRI 3.0 gives significantly higher NO levels compared to the GRI 2.11. This is mainly attributed to the difference in NO formation by the prompt mechanism. The NO formation is sensitive to the number of flamelet particles. The NO levels for two test flames do not change when the flamelet particle number exceeds six.     

Evolution and scaling of the peak flame surface density in spherical turbulent premixed flames subjected to decaying isotropic turbulence

The peak flame surface density within the turbulent flame brush is central to turbulent premixed combustion models in the flamelet regime. This work investigates the evolution of the peak surface density in spherically expanding turbulent premixed flames with the help of direct numerical simulations at various values of the Reynolds and Karlovitz number. The flames propagate in decaying isotropic turbulence inside a closed vessel. The effects of turbulent transport, transport due to mean velocity gradient, and flame stretch on the peak surface density are identified and characterized with an analysis based on the transport equation for the flame surface density function. The three mechanisms are governed by distinct flow time scales; turbulent transport by the eddy turnover time, mean transport by a time scale related to the pressure rise in the closed chamber, and flame stretch by the Kolmogorov time scale. Appropriate scaling of the terms is proposed and shown to collapse the data despite variations in the dimensionless groups. Overall, the transport terms lead to a reduction in the peak value of the surface density, while flame stretch has the opposite effect. In the present configuration, a small imbalance between the two leads to an exponential decay of the peak surface density in time. The dimensionless decay rate is found to be consistent with the evolution of the wrinkling scale as defined in the Bray-Moss-Libby model.     

Turbulent burning velocity and its related statistics of ammonia‐hydrogen‐air jet flames at high Karlovitz number: Effect of differential diffusion

To clarify the role of differential diffusion in highly turbulent premixed flames, a series of turbulent premixed ammonia/hydrogen/air flames were investigated using the NH-PLIF diagnostics. The investigated flames have almost the same laminar burning velocity, S_L, but are characterized by different Lewis number, Le, from 0.56 to 1.77. The Karlovitz number, Ka, of these flames ranges from 11 to 1052, and the turbulence intensity, u’/S_L, covers from 10 to 156. It is observed that the global consumption speed, S_T,GC/S_L, of sub-unity Le flames is much larger than that of super-unity Le flames at high Ka, indicating that the differential diffusion plays a significant role in highly turbulent flames. The flame surface density and the area ratio of turbulent flames with different Le are, however, similar under wide turbulent conditions. The stretch factor of sub-unity Le flames is estimated to be significantly larger than that of super-unity Le cases. The enhanced S_T,GC of sub-unity Le flames is suggested to be attributed to the promotion of local burning rates by the couple effect of differential diffusion and turbulent flame stretch within the flame brush, rather than the enlargement of flame surface area at high Ka. Furthermore, three correlations for the S_T,GC were developed based on Damkohler's second hypothesis with consideration of the Le effect. The correlation of S_T,GC/S_L ∼ (Re_T·Le^-2)^0.5 is further validated by using small-scale methane/air and large-scale ammonia/air flames at high Ka, where Re_T is turbulent Reynolds number. It suggests that the S_T,GC is roughly inversely proportional to the Le, and the differential diffusion effect should be included in the theoretical analysis and numerical simulation of highly turbulent flames.     

Stabilization mechanism of turbulent premixed flames in strongly swirled flows

The stabilization of turbulent premixed flames in strongly swirled flows undergoing vortex breakdown is studied in the case of the ALSTOM En-Vironmental (EV) double cone burner using a simple one-dimensional boundary layer type model and computational fluid dynamics, mainly at the level of large-eddy simulation. The analysis shows that, due to flame curvature effects, the flame speed on the combustor axis is 2 D _t/R _F lower than the turbulent burning rate, where D _t is a characteristic turbulent diffusion coefficient and R _F the flame radius of curvature. Flame propagation with negative speed observed in the experiments, i.e. the flame completely embedded in the central recirculation zone on the symmetry axis, is explained with the one-dimensional model as caused by the factor 2 D _t/R _F being larger than the characteristic turbulent burning rate. A peculiar sudden displacement of the flame anchoring location deep into the burner, which takes place experimentally at a critical value of the equivalence ratio, cannot however be explained with the present one-dimensional approach due to the modelling assumptions. The mathematical analysis is supported in this case with large-eddy simulation which can accurately reproduce the flame behaviour across the full operating range. It is finally shown that steady RANS methods cannot cope with the problem due to their inability to correctly predict the velocity flowfield in this burner.     

Modelling of turbulent lifted jet flames using flamelets: a priori assessment and a posteriori validation

This study focuses on the modelling of turbulent lifted jet flames using flamelets and a presumed Probability Density Function (PDF) approach with interest in both flame lift-off height and flame brush structure. First, flamelet models used to capture contributions from premixed and non-premixed modes of the partially premixed combustion in the lifted jet flame are assessed using a Direct Numerical Simulation (DNS) data for a turbulent lifted hydrogen jet flame. The joint PDFs of mixture fraction Z and progress variable c, including their statistical correlation, are obtained using a copula method, which is also validated using the DNS data. The statistically independent PDFs are found to be generally inadequate to represent the joint PDFs from the DNS data. The effects of Z–c correlation and the contribution from the non-premixed combustion mode on the flame lift-off height are studied systematically by including one effect at a time in the simulations used for a posteriori validation. A simple model including the effects of chemical kinetics and scalar dissipation rate is suggested and used for non-premixed combustion contributions. The results clearly show that both Z–c correlation and non-premixed combustion effects are required in the premixed flamelets approach to get good agreement with the measured flame lift-off heights as a function of jet velocity. The flame brush structure reported in earlier experimental studies is also captured reasonably well for various axial positions. It seems that flame stabilisation is influenced by both premixed and non-premixed combustion modes, and their mutual influences.     

Laminar and unstable burning velocities and Markstein lengths of hydrogen–air mixtures at engine-like conditions

Hydrogen offers an attractive alternative to conventional fuels for use in spark ignition engines. It can be burned over a very wide range of equivalence ratios and with considerable exhaust gas recirculation. These help to minimise pumping losses through throttleless operation and oxides of nitrogen (NO_x) production through reduced temperature. Full understanding of hydrogen-fuelled engine operation requires data on the laminar burning rate of hydrogen–air residuals under a wide range of conditions. However, such data are sparse. The present work addresses this need for experimental data. Spherically expanding H₂–air flames were measured at a range of temperatures, pressures, and equivalence ratios and with varying concentrations of residuals of combustion. Unstretched burning velocities, u_l, and Markstein lengths, L_b, were determined from stable flames. At the higher pressures, hydrodynamic and diffusional-thermal instabilities caused the flames to be cellular from inception and prohibited the derivation of values of u_l and L_b. The effect of pressure on the burning rate was demonstrated to have opposing trends when comparing stoichiometric and lean mixtures. The present measurements were compared with those available in the literature, and discrepancies were attributed to neglect, in some works, the effects of stretch and instabilities. From the present measurements, the effects of pressure, temperature, and residual gas concentration on burning velocity are quantified for use in a first step towards a general correlation.     

Premixed flames for arbitrary combinations of strain and curvature

Many modeling strategies for combustion rely on laminar flamelet concepts to determine structure and properties of multi-dimensional and turbulent flames. Using flamelet tabulation strategies, the user anticipates certain aspects of the combustion process prior to the simulation and selects a flamelet model which mimics local flame conditions in the more complex configuration. Flame stretch, which can be decomposed into contributions from strain and curvature, is one of the conditions influencing a flame’s properties, structure, and stability. The objective of this work is to study premixed flame structures in the strain-curvature space using a recently published composition space model (CSM) and three physical space models for canonical flame configurations (stagnation flame, spherical expanding flame and inwardly propagating flame). Flames with effective Lewis numbers both smaller and larger than unity are considered. For canonical laminar flames, the stretch components are inherently determined through boundary conditions and their specific flame configuration. Therefore, canonical flames can only represent a certain sub-set of stretch effects experienced by multi-dimensional and turbulent flames. On the contrary, the CSM allows arbitrary combinations of strain and curvature to be prescribed for premixed flames exceeding the conditions attainable with the canonical flame setups. Thereby, also influences of negative strain effects and large curvatures can be studied. A parameter variation with the CSM shows that flame structures still significantly change outside the region of the canonical flame configurations. Furthermore, limits in the strain-curvature space are discussed. The present paper highlights advantages of composition space modeling which is achieved by detaching the representation of the flame structure from a specific canonical flame configuration in physical space.     

Heat release rate as represented by [OH] × [CH2O] and its role in autoignition

Data from a recent instantaneous, simultaneous, high-resolution imaging experiment of Rayleigh temperature and laser induced fluorescence (LIF) of OH and CH₂O at the base of a turbulent lifted methane flame issuing into a hot vitiated coflow are analysed and contrasted to reference flames to further investigate the stabilization mechanisms involved. The use of the product of the quantified OH and semi-quantified CH₂O images as a marker for heat release rate is validated for transient autoigniting laminar flames. This is combined with temperature gradient information to investigate the flame structure. Super-equilibrium OH, the nature of the profiles of heat release rate with respect to OH mole fraction, and comparatively high peak heat release rates at low temperature gradients is found in the kernel structures at the flame base, and found to be indicative of autoignition stabilization.     

The response of turbulent premixed flames to normal acoustic excitation

To model the thermo-acoustic excitation of flames in practical combustion systems, it is necessary to know how a turbulent flame front responds to an incident acoustic wave. This will depend partly on the way in which the burning velocity responds to the wave. In this investigation, the response of CH₄/air and CH₄/H₂/air mixtures has been observed in a novel flame stabilisation configuration, in which the premixture of fuel and air is made to decelerate under controlled conditions in a wide-angle diffuser. Control is provided by an annular wall-jet of air and by turbulence generators at the inlet. Ignition from the outlet of the diffuser allows an approximately flat flame to propagate downwards and stabilise at a height that depends on the turbulent burning velocity. When the flow is excited acoustically, the ensemble-averaged height oscillates. The fluctuations in flow velocity and flame height are monitored by phase-locked particle image velocimetry and OH-planar laser induced fluorescence, respectively. The flame stabilised against a lower incident velocity as the acoustic amplitude increased. In addition, at the lowest frequency of 52 Hz, the fluctuations in turbulent burning velocity (as represented by the displacement speed) were out-of-phase with the acoustic velocity. Thus, the rate of displacement of the flame front relative to the flow slowed as the flow accelerated, and so the flame movement was bigger than it would have been if the burning velocity had not responded to the acoustic fluctuation. With an increase in frequency to 119 Hz, the relative flame movement became even larger, although the phase-difference was reduced, so the effect on burning velocity was less dramatic. The addition of hydrogen to the methane, so as to maintain the laminar burning velocity at a lower equivalence ratio, suppressed the response at low amplitude, but at a higher amplitude, the effect was reversed.     

Modelling compression ignition engines by incorporation of the flamelet generated manifolds combustion closure

Tabulated chemistry models allow to include detailed chemistry effects at low cost in numerical simulations of reactive flows. Characteristics of the reactive fluid flows are described by a reduced set of parameters that are representative of the flame structure at small scales so-called flamelets. For a specific turbulent combustion configuration, flamelet combustion closure, with proper formulation of the flame structure can be applied. In this study, flamelet generated manifolds (FGM) combustion closure with progress variable approach were incorporated with OpenFOAM® source code to model combustion within compression ignition engines. For IC engine applications, multi-dimensional flamelet look-up tables for counter flow diffusive flame configuration were generated. Source terms of non-premixed combustion configuration in flamelet domain were tabulated based on pressure, temperature of unburned mixture, mixture fraction, and progress variable. A new frozen flamelet method was introduced to link one dimensional reaction diffusion space to multi-dimensional Computational Fluid Dynamics (CFD) physical space to fulfill correct modelling of thermal state of the engine at expansion stroke when charge composition was changed after combustion and reaction rates were subsided. Predictability of the developed numerical framework were evaluated for Sandia Spray A (constant volume vessel), Spray B (light duty optical Diesel engine), and a heavy duty Diesel engine experiments under Reynolds averaged Navier Stokes turbulence formulation. Results showed that application of multi-dimensional FGM combustion closure can comprehensively predict key parameters such as: ignition delay, in-cylinder pressure, apparent heat release rate, flame lift-off , and flame structure in Diesel engines.